Hi guys, i was update my 3gs phone to version 6.0.1 after it says there is no sim card installed in the iphone ur attemting to activate, i disconnect the sim card and insert the new sim still i am getting the same message pls help me up.......
hi
Sounds like the phone was jailbroken or hacked to unlock it. If that's the case, it's now a brick. Buy a new phone.
Similar Messages
-
I have Photoshop CS5 Extended and it says updates available but when i download the updates it says updates failed please try again later, i have tried a few times and get the same message any help would be great i am running 64bit on windows 8.
I am running Windows 7 64 bit ultimate and have the same problem. My hard drive crashed, installed a new one and then reinstalled CS5 extended. Installation went fine, but can no longer open my camera RAW files from Photoshop (camera is a Canon EOS T2i. The message also tells me I am not eligible for the update. I am... and I cannot open my files and I could before. I can find nowhere to contact Adobe to tell me how to proceed. My daughter is all a registered user of the same product and she had no problems upgrading... we purchased ours each at the same time. I do know the difference is that I had to reinstall and she did not. If that means anything.
-
I downloaded Mac OS X and I am having problems installing it: I get messages saying that it is was corrupted during downloading. I have tried re-downloading (which Appstore tells me is free) but everytime I get the same message. Help
Are you using dial-up, cable, or DSL? Do you have a slow or fast connection? The former is likely to make it difficult to get a reliable download of a 4 GB file.
-
I just updated itune and getting an error mscvr80,dll missing. I uninstall and reinstall and getting the same message. help
DLL files typically do not affect Mac OS X systems. Are you sure you are running Mac OS X? If you are running some version of iTunes Windows, the forum for that is here:
https://discussions.apple.com/community/itunes/itunes_for_windows -
I invoked Photoshop Elements and received this message:
This product has has (sic) encountered a problem which requires that you restart your computer befor4e it can be launched.
If you continue to see this message after restarting your computer, please contact either your IT administrator or Adobe technical support for help, and mention the error code shown at the bottom of this screen.
Error: 150:30
http://www.adobe.com/support/Thank you Barbara, for your feedback. I actually got a person in the Adobe chat room to walk me to this link http://helpx.adobe.com/creative-suite/kb/error-licensing-stopped-windows.html . Solution 1 did not work, but Solution 2 worked like a charm. I appreciated the fix!
-
can any anyone help i have been trying to install itune's onto a new computor with windows 8 i keep getting an error #2324.i also tried to unstall itunes,quicktime etc. and get the same message please help!!
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
Select
/var/log ▹ appstore.log
from the hierarchical list on the left. If you don't see that list, select
View ▹ Show Log List
from the menu bar. Then select the messages from the last installation or update attempt, starting from the time when you initiated it. If you're not sure when that was, click the Clear Display button in the toolbar of the Console window and then try the installation again.
Copy the messages to the Clipboard by pressing the key combination command-C. Paste into a reply to this message (command-V).
If there are runs of repeated messages, post only one example of each. Don’t post many repetitions of the same message.
When posting a log extract, be selective. Don't post more than is requested.
Please do not indiscriminately dump thousands of lines from the log into this discussion.
Important: Some private information, such as your name, may appear in the log. Edit it out by search-and-replace in a text editor before posting. -
Multiple agentry servers installed in the same system?
Hello Experts,
There are two agentry servers installed in the same system,but in different drives(C and D drive).I have given access to one server remotely,in the sense the applications to the server in one drive are published by other developers who are connecting to the server through network. In the other drive server iam publishing the applications developed locally.But after deployment,when i connect to the server to retrieve definitions,iam getting the latest application published.
Is this situation possible,because when we connect to the server we are using ip address of the system where the server is installed,if both the servers are running in different drives,then which server application will be deployed,Is there any possibility to connect to the server instances(in my system two server instances),so that the application that is deployed to individual servers can be retrieved?
Thanks in advance
Regards,
Sravanthi
Message was edited by: Michael ApplebyHi Sravanthi,
I do not believe that you can run two Agentry Servers on the same hardware without making other changes (like running them on SMP 2.3). I would suggest that you look into the documentation for SMP 2.3 as your best solution at this time. Hopefully some more savvy Agentry folks will chime in with a more detailed response.
Regards, Mike
SAP Customer Experience Group - CEG
Message was edited by: Michael Appleby -
I'm traveling to Europe (France and Lithuania) with my iPhone 5s. I would like to buy a local SIM card for use while in each country. Some sources (Verizon phone support) say this is as easy as buying the card and inserting in place in the slot. Others (Apple Genius) say I must completely restore the iPhone if I replace the sim card. Still others say I cannot use a local sim card. Can you help me find the correct information? Thanks for your help.
That's a wonderful question, ssmiley67. The iPhone 5s comes unlock for international use. Many of our LTE devices are unlocked for international purposes and work upon inserting the international SIM in the device.
YosefT_VZW
Follow us on Twitter @VZWSupport -
i have an old i phone 3s and was using it as an ipod. at the last update i got got a message saying there is no sim card in the phone. i do not want it to be a phone anymore. however the device has a locked screen saying it has no SIM card. how do i get back to unlocking the iphone and using it as an ipod again.
thanksiPhones require a SIM card for activation, regardless of whether it is being used as an iPhone or an iPod.
Put a SIM in the device for the carrier it is locked to and activate it. The SIM can then be left it it or removed. -
I was updating my iphone and i deleted everything now it say there is no sim in the phone, i have gone to the iphone shop and they say is is working The sim is in the phone . when i take it out and put it in another phone i can call and recieve calls
I did call apple care and they guided me through everything.. they said it was the hardware
I was given this phone last year as a present
i know, it was not new.. so it could have been on an other cell provider i am not sure if it was so at the moment that is all i can do -
i have the new ipad and inserted a new tata docomo sim in it, it shows network but is not able to connect to the internet,,, can any1 plzz help me out
Let's start with the most obvious? Have you paid for service? If yes, thry THIS.
-
Which option do I have to select If I buy the latest iPad with cellular feature for international use? If I choose verizon can I just change the sim card and insert one from another country?
I would guess you need the A1460 model
see here
http://www.apple.com/ipad/LTE/ -
i updated my i pad with ease then updated my i phone and now apple does not recognise the i phone and then says there is no sim in the phone when there is one installed, can anyone help
See Here > http://support.apple.com/kb/HT1808
You may need to try this More than Once...
But... if the Device has been Modified... this will Not necessarily work. -
my iphone doesn't open on the itunes and it shows me a message saying there is no sm card disconnect and insert sim card and there is a working sim card inside the device and i can't restore the device as it doesn't open on the computer so what shall i do?
Remove and reinsert the SIM card.
Replace the SIM card. -
after I reinstall Itunes, the message read "the file iTunes Library.it cannot be read because it was created by a newer version of itunes, i have tried with iTunes version 11.1, 10.1 and 9.1 still come up with the same message and will not open iTunes
Try the following user tip:
Empty/corrupt iTunes library after upgrade/crash
Maybe you are looking for
-
Tried opening a file in library and it states can't open database with library name? It says Relaunch then will not open? and Blocks me completely from Aperture. I have to go to Finder to Rename it? I need this file how do I get it to open?
-
i have two internal table tab1 and tab2 both have SOME fields common but not all tab1 has some values which i want to assign to tab2 with same fields can i do this in a single statement in tab1 loop or i have to assign each field seperately as tab2-f
-
Display still looks like it is ready to go, and the printer responds to things like opening the scan table, toner door opening, but all of these seem to be automatic and in reality nothing works. Interior scanning light is on. It is also completelly
-
Problem exporting QuickTime file (*.mov)
When I try to export my Flash animation as a QuickTime movie (*.mov) in Flash 8 Professional (or in Flash MX 2004, doesn't matter) an error appears stating that an error occured because a required QuickTime component could not be found. I have Apple
-
"invalid max_result_rect from PF_Cmd_SMART_PRE_RENDER"
Hallo, I got this error curves returned invalid max_result_rect from PF_Cmd_SMART_PRE_RENDER What happend here? What causes this error. How I can I work around this bug? I did a search but the results are old. I'm working with the newest version. Pre