Hi, how to debug forms of script

hi
could anybody tell me how to debug script forms.
i am using /h in se71, but it is not going inside form.
pl guide me fast.
thanx
robo

Hi Rocky,
Go through the following two ways
SAP Script:
YOu Can debug a SAP Script by activating debugger in two ways 1.In SE71->Menu->Utilities->Activate Debugger, then debugger will be get activated and when your print program is executing Script Debugger will be in active and you can proceed with your debugging.
2. Goto se38-> RSTXDBUG ->Execute this same as going thru in se71-> Menu, now debugger will be activated.
Smartform:I am afraid , we dont have any direct commands or direct procedure to debug a script. But in indirect ways we can do it.
1.Put a command line before where you want check the value of smartform and write the code "BREAK-POINT"->hardcoded debugging.
2.You can debug the function module which generates the smartform.
Regards
Sreeni

Similar Messages

How to debug form.js ?

I have this file (form.js) with some javascript functions invoked from mine UIX pages.
1) If I create a custom.js file, how can I make it available form my pages?
2) How can I step-by-step debug this file? Breakpoints are ignored there.
Thanks

Idevaldo,
When placing too many alerts in javascript, you might get annoyed with the number of times you have to click 'ok' to close a debug message. In form.js, we have the following code for writing debug messages:
var myDebugMode = true; /* default is false */
function myDebug(text)
if (debugMode)
debugMode = confirm(text);
Then, instead of doing: alert("helloWorld") we use: debug("helloWorld"). The advantage is that you get both an OK and a Cancel button for each debug message. OK will take you to the next debug message, but the CANCEL button will turn debugMode off for the remainder of the request. So if you have seen what you needed to see you wont have to click through another 100+ messages.
You can invoke this debug message from your own JS library as well. If this creates an unwanted dependency, you can implement this behaviour in your own JS file, but make sure you rename both the variable and the method name to avoid conflicts with our code.
Kind Regards,
Peter Ebell
JHeadstart Team

Quotation(VA22) - How to change form - sap script or smartforms ?

Hallo,
as defaults, by VA22 I can print the quotation by sapscript.
I have to change form: I have to create a new smartforms instead sap script. in transaction V/30 I can set some parameters to change it.
My question is: Where is the correct parametrs to entry ?
(I entered the name of smartforms and a Z print program but I got an error message )
Any idea ?
Tks.

Hi,
I guess the terminology's causing some problems. Here's what I think you need to do;
In transaction V/30 select the Output Type then double-click on the folder 'Processing Routines'. The columns are as follows;
Medium - Print, email etc
Program - Name of the print program
FORM Routine - name of the subroutine in the print program that will be called
Form - Name of the SAPscript (if used)
PDF/Smartform Form - Name of the Smartform, or pdf form (if used)
Type - If a Smartform or pdf form is specified, select from this drop-down which type it is.
If you're getting an error when you enter your parameters, it would be useful if you told us what the error was.
Regards,
Nick

How to debugg the SAP Script

Hi to all.....
How to Debug the SAP Script when it get's triggered with the Transaction.
And how to Align the Standard Text data ..That is Justifing the statements.
Advance Thanks to all
Chinnu

In se71, Chose from menu:
Utilities-> Activate Debugger
From the transaction, In the output message screen, you chose chose your output type, Go to Further options, Chose the dispatch option as Send at periodically scheduled jobs . then save the transaction. And run the prigram RSNAST00 It would stop at the debugging.
Regards,
ravi

How to Debug Java Script in Adobe Form

I have used an alert for empty fields . I have used Check button control for this.
But the button click is very inconsistent. Some times it triggers the event sometimes it doesnt. Is there anyway to debug the java script. I have installed Script editor for IE but I am unable to use it for Adobe Forms.
Any help is appreciated.
Thanks,
Vasu

Hi Vasu,
i think that maybe is the check sequence is not very correct.. and maybe you can try to code it one check for empty fields at a time..
example
Name.
Address.
Tel.
Hp.
Email.
so u can try to code for one item at a time then slow try to debug it... as last time i use to insert the javascript inside each component then after it i implement into a button and slowly check for the check sequence which one need to be 1st and etc.
hope it help you. if not maybe u can give more information. maybe i can help you out at myside.
Regard,
Ng Jia Jun

Debug dynpro + call script form

Hello ,
I have a req, I need to debug the few dynpro, and one of the dynpro is calling a form and I have to figure it out, which form is this ( and from where it is called ). I have never worked with script form before, can any one let me know how I can figure it out that ( how to call a form, I mean it should be statemnt like, call form .... or ) ?
One another thing, I went into the coding, and there I see the screen ( in execution mode, the screen shows some button, ( e.g show , and after pressing this button show ,the form appers ), but when I went in flowlogic of the screen, I cant see those button ?
Any idea....
Regards,

Shah,
Do like this.You might be pressing some push button after which the smart form or script is appearing.
do screen debugging.
enter /h in the command field and press enter.
now press the push button.
this will take you to the logic in the driver program where the smartform or script is getting invoked.
if it is a smartform you will see a function module SSF_FUNCTION_MODULE_NAME.
smartform name will be stored in LF_FORMNAME
put a watch point here to get the smartform name.
if it is a script you will come across the following functional modules.
open_form,write_form,close_form.
Script name will be given in the open form functional module.
If any doubt revert it.
K.Kiran.
Message was edited by:
Kiran K

How to debug BDC , Dialog program and Script

Hi all,
Please let me know, how to debug BDC , Dialog program and Script
Thanks&Regards
Devi

SCRIPT DEBUGGING
When we want to debug the SAPSCRIPT, we need to first activate the debugger, we have 2 ways to activate the Debugger.
1) Execute the program RSTXDBUG
2) Go to SE71, from the initial screen enter the form name and press Utilities --> Activate Debugger
When we are in the Debug screen,
3.1) F5 will be debug filed by field, that means if a single line is having 5 fields, if we press the F5 this will do field by field,
3.2) F6 will be line by line, that means when we press the F6, it will debug the line and it will go to the next line. F7 also do the same way
3.3) F8 will be very useful when we have any include statement in the SCRIPT, if any include is there and we press the F5 or F6 then this will go that Include (normally SO10 or any transaction text), then if we want line by line debugging then we can press the F5 or F6, or if you want to execute that in a single shot then press the F8, then the debugger will be executed that include and come back to the Script debugging.
Some times in the script, we may right lengthy lines, if we want to debug that whole line, we have an option called Left/Right, this we will find the Debug screen of the script, there is a Push button, we can make use this button to debug.
We can put the breakpoints in the SCRIPT DEBUGGER also, just press the BREAKPOINT Pushbutton from the debugging screen or press EDIT --> Breakpoint
If we want to debug the print program from the SCRIPT DEBUGGER, just press SHIFT+F7 or EDIT --> ABAP Debugging
If we want to see the Windows which are defined in the forms, just press the Go to --> Form --> Windows .if we want to see the pages go to --> Form --> pages. Here we have an option to see the page wise window also go to --> Form --> page Windows
If we want to see the paragraphs which are defined in that script, press go to --> Styles --> paragraphs.
If we want to see the Character formats which are defined in that script, press go to --> Styles --> Character Strings.
If we want to see the Page formats which are defined in that script, press go to --> OTF --> Page.
If we want to see the Elements which are used in the Script, then press go to --> Text Elements --> Form Elements.
If we want to see the commands which are used in the script, press go to --> Commands --> List
Finally, if we want to exit from the SCRIPT DEBUGING, simply press Debugger --> Exit
DEBUG BDC
ust go into debugging mode and do the BDC step by step, when it comes to the Call Transaction line, check the mode which will be 'N'....Now, overwrite this with 'A' and execute the BDC...It will run in All Screens Mode....
As suggested above the MODE 'A' will do the trick as it takes you to all screens.
Normally MODE N will be defaulted as it will be used for background processing,
Here is a simple tip,
This will be the call transaction part of the program,
CALL TRANSACTION 'IW32' USING BDCDATA MODE 'N'
MESSAGES INTO MESSTAB.
I would suggest you to make it like this,
DATA: V_MODE TYPE C VALUE 'N'.
*<In debug mode set V_MODE = 'A' for debugging>
CALL TRANSACTION 'IW32' USING BDCDATA MODE V_MODE
MESSAGES INTO MESSTAB.
This will be very useful because you just need to change the value of the V_MODE at runtime as A for debugging besides it has N which is the default to be used. (i.e. you need not change the code again and again).
This will be very useful when you have to debug some program in QA or PRD servers.
regards,
srinivas
*reward for useful answers*

How to assign modified forms (SAP scripts etc.,) to Dunning texts

Hello, how do I assign forms (SAP scripts etc.,) to dunning texts according to no 5 above?
I've copied the form f150_dunn_01 and modified it. Now I want to assign my modified form to dunning text. In txn fbmp I have created new procedure and when I clicked on Dunning texts it takes me to dunning text screen where I should be able to assign my modified form. But the screen is greyed out and not editable. Is there anything I'm missing or I've permission issue?
Please help
Regards
Naz
Most of the config for Dunning is done with TCode FBMP.
Key Steps are :-
1.     Define the dunning procedure or use the standard
2.     Define the dunning levels (desired stages of reminder)
3.     Define the dunning interval (frequency of reminder)
4.     Line item grace periods & Min.days in arrears (acct) govern the criteria for picking items to be dunned along with Minimum amounts
5.     Assign forms (SAP scritps etc.,) to dunning texts. Forms contain the contents of the reminder notice and the format of notice.
6.     You can include the Sp GL Transactions as well.
7.     Customer/Vendor Master Records needs to be updated with the Dunning
8.     Procedure etc, Dunning tab in the master data
9.     Use F150 to run.

Hi Praveen,
Ok let me go through the steps that I have done so for.
1. New dunning procedure 004 been created in Txn FBMP
2. Then by choosing the assigned dunning procedure 004, trying to update the form by selecting the company code and then Dunning text. But the screen is grayed out.
Please pass me your email address then I will send you the screen shoots.
Thanks
Naz

How to use the 'Username' filed's value in form level scripting?

Hi,
I have applied the Rights Management for a form. I wanted to use the 'Username' field's value, which is present in below image for the form side scripting. How can we get this value? Any script is there to extract this value in the form?
Thanks in advance,
Arjun

Hi Jo,
Thanks for the reply. The settings (MobileEngine.Security.SyncPasswordFieldAtLogon=true) in my Mobile client is such that when i open it i am asked the User, Logon Password and the Synchronization password(which is not mandatory). So if I dont even enter it during logon i am asked to enter it when i hit the sync button on the client.
But if i have entered it during logon and then hit the sync button on the client, that time i am not asked to re-enter my sync passwd and the client syncs with the b/e. Which means that the sync passwd i had entered during logon is definitely stored somewhere.
What i mean by using the sync passwd in applications is this :-
-> In a generic sync appln before synchronising with the b/e we need to give the sync passwd to the SyncManager. How do we get this sync password from the user of the appln?
-> We can either ask him to enter it as in input to a jsp OR else since he has already entered it during logon we need not ask him to enter it again and retrieve it via some API.
Is this possible.
Thanks & Regards,
Saurabh.
Message was edited by:
Saurabh Agarwal

How to debug zrffous_c payment advice script program?

Hi experts,
Payment advice is printing through (ZRFFOUS_C) this program. I want to debug this program .I tried in this way.
Put the break-point in the program and execute then enter the input data and execute then the following message is displayed.
"A:FO:098 29.01.2009 PNB" after this stopped the program .How to debug this program? I want to find these values (REGUP-BELNR, REGUP-XBLNR) in the program .The location where these values selecting in the program?I tried but i didn't get.
please give me the details or give me form name?
please help me in this?

Hi,
Your procedure of debugging is correct.
when you getting the error message , double click on the message on status bar and see wheather it is standard message or
custome message.
you are getting that error because of invalid data so get the valid data from respective Functional consultant
and try to debug again.
You ll not get that error after giving valid data.
Regards,
Pravin

Regarding debugging in sap script and smart form

hi guys,
can any one tell me what are the different steps and options available to debug a SAP SCRIPT and a SMARTFORM.
thank you very much
pavan

Scripts:
1. In the form, Utilities->debugger / RSTXDBUG FM for debugging script
2. Generally SAP script contains the Layout and corresponding print program.
First go to SE71 and enter ur script name. In the same screen go to Utilities->click on activate debugger option.
Now go to SE 38 and enter ur Print Program name and execute the program.
Now you can debug the script Page wise and window wise.
Smartforms:
In the Smartform, create a Code Node and within the Code Node you can hardcode a normal abap Break Point.
Insert a "Program Line" just above the node you want to debug and this program line write a normal abap breakpoint. So whenever you call the smartforms, it will stop at this breakpoint and you can debug onwards.
Other way to debug smartform is to debug the Function Module of that smartforms.
You can also use smartform trace (transaction SFTRACE).
Have a look at below link.
http://help.sap.com/saphelp_erp2004/helpdata/en/49/c3d8a4a05b11d5b6ef006094192fe3/frameset.htm
I hope it helps.
Best Regards,
Vibha
*Please mark all the helpful answers

How to debug the smart forms

Hi All,
Can any body guide me how to debug the smart forms.
Thanks & Regards,
Satish.

Hi,
The the best way to debug the form is to put a breakpoint in the function module generated by the smartform.
Procedure:
Open the smartform we want to debug.
Goto Environment -> Function module name.
Open the function module in SE37. From the menu GOTO -> main program. Open the last include.
This incude contains the entire code ie the code we have written in initalization + form routines + program lines + sap generated code.
Even we can search for the text nodes, folders, templates, tables, graphics, address nodes etc with their names.
Put a breakpoint at any point you want.
If we issue any doc which triggers this form, when the control reaches the break point it will stop.
Please note that hard-coding the break points in the code ( Program lines ) is not recommended and it can´t be done unless if it is development server.
So, always put a session break point in the related function module.
We can use SFTRACE transaction to know the sequence of the control flow.
If you want to break at each and every text that is printed on the output form put the break points in the forms.
1. %write_text to break at text element.
2. %WRITE_TEXT_MODULE to break at text module.
3. %WRITE_INCLUDE_TEXT to break at include text.
Please put a break point at the first sy-subrc check.
If the control reaches this point, you can find the name of the element in the varible NAME and the content in the text node in %TEXT.
Its easy to understand the sequence of the printing if we put a breakpoint as stated above.
Regards,
Satish.

How to make Form builder 10g step into libraries *.pll while remote debug

How to make Form builder 10g step into libraries *.pll while remote debug. It attaches fine and goes through code located in form but skips pll's. In this case I am interested in debuging CUSTOM.pll. How to step into pll's and is it possible at all?

Is the library in the same directory or within your FORMS_PATH? Note that the runtime setting in the default.env doesn't work for the builder.
cheers

How to debug a form module (Oracle 11G Forms) through URL

How to debug a form module (Oracle 11G Forms) through URL.
My server OS is Unix. So i could not able to do the Debug Forms from the Form Developer.
It is displaying a message that "Cannot find the module". Becuase the system is trying find out the module in Unix system instead of ma local system(Windows).
I need to debug ma module through URL.
I can place the fmb and fmx in predefined form path in Server.
Please help me out to solve this issue..

This is a little unclear. If your goal is to use the Forms Builder Debugger while running your form on a Unix machine, this can be done. However, the form must first be in running order. So before trying to attach the debugger you must first be able to start it without the debugger. For example:
http://yourServer:OHS_port_number/forms/frmservlet?form=yourFMX
Once this is properly running you can turn on debugging. If your form won't even start, then using the Debugger isn't going to help you because it is designed to troubleshoot coding problems and not configuration problems.
So, do this to use the Debugger:
http://yourServer:OHS_port_number/forms/frmservlet?form=yourFMX&debug=yes
This will display a dialog box with some information. Do not click on OK yet as you will need this information to enter into the Forms Builder. Now, open the Forms Builder and click on Debug > Attach Debug. You will be asked for the information displayed in the dialog where you attempted to start the form. Enter it here (in the Builder) then click on ok in both places. To display the Debugger (in the Builder), click on Debug > Debug Console. Then from its toolbar click on the buttons related to what you want to monitor. Including a break point in your application code is often a more helpful way to use the debugger.
Most of this information is explained in the Forms Builder Online Help
Forgot to mention...
To debug runtime issues, refer to the Forms Deployment Guide here (this assumes you are using 11.1.2):
http://docs.oracle.com/cd/E38115_01/doc.111210/e24477/appa.htm
Edited by: Michael Ferrante (Oracle) on Feb 21, 2013 1:45 PM

How to debug d2k form.

hello ......
please let me know how to debug a d2k form?
thanks n regard
yash

You can also set breakpoints in your code you want to debug. e.g. if you want to debug a specific trigger like WHEN-BUTTON-PRESSED, then put BREAK; statement from where you want to start debugging.
You can also set breakpoint in the debugger itself by opening specific trigger and double clicking the line of code to start debugging.
For running in debug mode, press SHIFT+CTRL+R and then step into the code like FormsEleven explained.
Hope it helps!

Hi, how to debug forms of script

Similar Messages

Maybe you are looking for