Hi i am using thunderbird in my system and i add subfolders in my local folder but some how when my system shuts down my all folders got ideal

by some how my all folders got disappered while my system got shut and then when it restsrt i have to give path to local folders when they cam back by this problem my all emails come in inbox mot in my local folders pls resolve my problem.

''renuwali [[#question-1054698|said]]''
<blockquote>
by some how my all folders got disappered while my system got shut and then when it restsrt i have to give path to local folders when they cam back by this problem my all emails come in inbox mot in my local folders pls resolve my problem.
</blockquote>

Similar Messages

  • System shut down during F110 payment run

    During the F110 payment run, the PRD system shut down. There were 259 items in the proposal and according to the status 42 posting orders were generated and completed. What is the process to handle this problem? Can the payment run be re-started?
    It appears that clearing documents were created for some open items before the system shut down but no checks are showing in the check register. Has this happened to anyone before and what steps should be taken to resolve this?

    Is it a matter of...
    1. deleting the output of the payment run,
    2. deleting the proposal
    3. canceling the the payment check by check using FCH8 if any occurred
    4. reseting and reversing the clearing documents created using FBRA before the system shut down
    5. start a new payment run

  • IMac from 2009, 4 GB RAM. System shuts down when I use safari or make much moves on the trackpath.

    I've got an iMac from 2009, 4 GB RAM. System shuts down when I use safari or make much moves on the trackpath. Use Mavericks, installed Mavericks again on clean system. Problem still exist. What now?

    The 2009 iMaccan take 8 GB ram, while it should run ok with 4 it might be a rather inexpensive test to put in 8 and see if that clears up the problems.  Mavericks is going to use almost 2 GB itself so, unless you are opening a lot of applications, you should get by with 4 GB.  But I would go for 8 and see how it does.

  • Recently I tried adding disc menu to my project and an error occurs and system shuts down using pre9

    Recently I tried adding disc menu to my project and an error occurs and system shuts down using pre elements 9 on mac how can this be repaired

    From the Premiere Elements Information FAQ http://forums.adobe.com/thread/1042180
    •What version of Premiere Elements? Include the minor version number (e.g., Premiere Elements 9 with the 9.0.1 update).
    •What operating system? This should include specific minor version numbers, like "Mac OSX v10.6.8"---not just "Mac".
    •Have you installed any recent program or OS updates? (If not, you should. They fix a lot of problems.)
    •What kind(s) of image file(s)? When talking about camera raw files, include the model of camera.
    •If you are getting error message(s), what is the full text of the error message(s)?
    •What were you doing when the problem occurred?
    •What other software are you running?
    •Tell us about your computer hardware. How much RAM is installed?  How much free space is on your system (C:) drive?
    •Has this ever worked before?  If so, do you recall any changes you made to Premiere Elements, such as adding Plug-ins, brushes, etc.?  Did you make any changes to your system, such as updating hardware, printers or drivers; or installing/uninstalling any programs?
    And some other questions...
    •What are you editing, and does your video have a red line over it BEFORE you do any work?
    •Have you viewed the tutorial links at http://forums.adobe.com/thread/1275830 page?
    •Which version of Quicktime do you have installed?

  • Auto System Shut Down

    Currently I am trying to put together a new computer. I have all the parts needed, and they are compatible. I put everything together, double/tripled checked all connections. when i try to turn it on, it runs for about 10 seconds, then just shuts off. ;(  I'm running it bare, i have no monitor, keyboard, mouse, and sound connected. I just turned it on barebone.
    I am using:
    K7N2 Delta-L Motherboard
    AMD 2800 Benton
    2x 512 kingston Ram sticks
    80gb 7200rpm hard drive
    floppy
    DVD drive
    CD/RW drive
    350watt enermax power supply
    I have tried taking one of the ram sticks out and turning it on, it didn't work.
    I tired getting a new 350watt antec power supply, it didn't work.
    WHAT ELSE CAN I DO?!?!  ?(  ;(
    Once again my problem is that the system shuts down automaticly after I turn it on. It will run for about 10 seconds then... it's down again.
    PLEASE!! SOMEONE HELP!!  ;(

    CMOS is the chip that stores ya bios info like date, time and cpu settings etc.
    It's the 3 pins bellow the small round silver battery.
    On my K7N2-L (non Delta) it's jumper JBAT1
    It as 2 settings 1 = keep data (normal use)
                     2 = clear data
     look at following X = jumper position o = empty pin
    Keep data
    O  
    x
    x  
    Clear data
    x    
    x
    o  
    after clearing cmos (do it with power off on PC or u will fry it) u will then need to setup bios again.
    If this still wont boot have a look at jumpers J10 & J11
    J10 sets cpu fsb mode
    J11 sets cpu fsb frequency.
    Look in ya manual it's in there.
    Try to get PC to post by setting J11 to
    J11  o     J10  o
         x          o  J10 not bridged = 100mhz
         x          
    J11 safe mode cpu fsb 100mhz.
    It will post then. Just the cpu will be set to a lower speed then it is.
    If it posts go in to bios and hit set bios default then bridge  J10 making it 133/166 mhz and J11 x
                                              x
                                              o  this sets J11 to default 133
    reboot and it should post good cpu speed.
    Hope u understand all this junk i just wrote

  • Premiere Pro CS4 crashes and system shuts down while rendering

    Hi All,
    Good morning everyone, my system shuts down while rendering using Adobe media encoder from premiere pro. I have tried the following:
    1.Completely removing CS4 and reinstalling.
    2. Updating all the video drivers.
    3. Re installing the Operating System (XP and Vista)
    But the issue persists, i have attached the crash report and any thoughts are highly appreciated.
    Regards,
    Vincent

    A number of problems pop out of your DXDIAG:
    Both your video driver and your audio driver are more than 3 years old.
    Your F drive is slow, because of the fill rate of 90%. You lack other hard disks.
    You have Matrox, BlackMagic, Nero, Sony, DivX and other stuff installed. It has been a long time ago that I have seen such a long list of DirectShow filters installed.
    Suggestions: Update your drivers, clean up your F drive and add another disk, remove all that Matrox stuff, possibly include BlackMagic and Sony.
    What export/encoding settings do you use from what sequence settings?

  • My computer starts, bar completes half way and the system shuts down. Dont know what happened.

    Starting abnormally, Like when I start my MacBook pro which is almost new. A bar runs on the white screen and then when it reached half way system shut down. Can anyone help. Any way to reset my computer.
    Also, when I am going to option, the system doesn't allow me by saying hard disk is locked. Kindly help out

    OS X- Gray progress bar appears under Apple logo during startup
    I suggest you need to erase your drive and reinstall OS X. Be prepared for the possibility that your hard drive has failed.
    Install or Reinstall Mavericks or Mountain Lion from Scratch
    Be sure you backup your files to an external drive or second internal drive because the following procedure will remove everything from the hard drive.
    OS X Mavericks- Erase and reinstall OS X
    OS X Mountain Lion- Erase and reinstall OS X
    OS X Lion- Erase and reinstall Mac OS X
    Note: You will need an active Internet connection. I suggest using Ethernet if possible
                because it is three times faster than wireless.

  • I was using my Macbook when it suddenly shut down, I was updating a program so I had the charger on even though there was still 90 percent of power in the computer. I tried to turn on the computer several times but is not working, what can I do?

    I was using my Macbook when it suddently shut down, I was updating the operating system so I had the charger on even though there was still 90 percent of energy. I tried to turn my Mac several times but it doesn`t turn on, also the green light of the charger is not working, it`s looks like the charger is dead too. What`s wrong with my Mac?

    Try resetting the SMC.
    MacBook and MacBook Pro with a battery you can remove
    Shut down the computer.
    Disconnect the MagSafe power adapter from the computer, if it's connected.
    Remove the battery.
    Press and hold the power button for 5 seconds.
    Release the power button.
    Reconnect the battery and MagSafe power adapter.
    Press the power button to turn on the computer
    To reset the SMC on newer Mac portables with a battery you cannot remove
    Shut down the computer.
    Plug in the MagSafe power adapter to a power source, connecting it to the Mac if its not already connected.
    On the built-in keyboard, press the (left side) Shift-Control-Option keys and the power button at the same time.
    Release all the keys and the power button at the same time.
    Press the power button to turn on the computer.  
    Note: The LED on the MagSafe power adapter may change states or temporarily turn off when you reset the SMC.

  • Dear sir, i used this apple id in my IPAD 4,But some how i forgot the apple id password that was stored in my iPad. i reset the same in my another device. I put the new password in my I pad. Due to mismatching of

    Dear sir,
    i used this apple id in my IPAD 4,But some how i forgot the apple id password that was stored in my iPad. i reset the same in my another device. I put the new password in my I pad. Due to mismatching of password that was stored in iPad and new password ,it does not accept it. very unfortunately i also unable to connect my iPad with internet because it does not allow me to connect. In every second message displayed for apple id password. i am helpless. please help to get rid opt from this problem.
    rgds
    R K Hazarika
    <Email Edited by Host>

    you manage the appleID on this site
    https://appleid.apple.com/cgi-bin/WebObjects/MyAppleId.woa/

  • Can some please provide instructions on how to import an iPhoto library from an old Mac to a new Mac without getting a bunch of duplicates?  I tried transferring my pictures using an external hard drive and then copying it to the Pictures folder on my Mac

    Can someone please provide instructions on how to import an iPhoto library from an old Mac to a new Mac without getting a bunch of duplicates?  I tried transferring my pictures using an external hard drive and then copying it to the Pictures folder on my new Mac.  I ended up getting a bunch of duplicates. My old Mac has an older version of iPhoto while the new Mac has iPhoto '11.  Is that the cause of the problem?  Please advise.  Thanks.

    Simply copy the iPhoto Library from the Pictures Folder on the old Machine to the Pictures Folder on the new Machine.
    Then launch iPhoto. That's it.
    This moves photos, events, albums, books, keywords, slideshows and everything else.
    Regards
    TD

  • HT4972 Hello there, i have an i Phone 3GS which was locked on the network Orange from U.K i finished the contract last year, but some how i cant unlock it to be able to use on a different network. tried to restore it on itunes but it says unable to proces

    Hello there, i have an i Phone 3GS which was locked on the network Orange from U.K i finished the contract last year, but some how i cant unlock it to be able to use on a different network. tried to restore it on itunes but it says unable to process at this time.

    under UK legislation, if your are out of contract (and not owing the carrier any debts!) they are LEGALLY obliged to unlock you, and within a certain number of (few) days.. search OFCOM for the regulations.
    That said, they are also entittled to charge you for this (usually about £20!)
    I believe, that this can also be done via an APPLE STORE, but the first option is always the Origional Network carrier.
    Orange has a terrible repuation now for customer service (which is just one reason they changed their name to EE!, and yes, this is fact which is why they came Bottom in several recent customer satisfaction surveys.. so they are not going to rush to help you leave them are they..)

  • How to start or shut down database using sql developer in windows

    Dear Sir/Madam,
    how we start or shut down database using sql developer in windows
    we are using oracle 11g release2, unix, java & oracle oracle weblogic administration
    Thanks & Regards
    Manish Kumar
    Datbase Team
    TCS Ltd.

    HI, Welcome to OTN form,
    SHUTDOWN is not a SQL statement but a SQL*Plus command . You cannot use SHUTDOWN in PL/SQL.
    Check following link:
    http://docs.oracle.com/cd/E11882_01/server.112/e16604/ch_twelve042.htm#i2699551
    More Information please check OTN discussion: https://forums.oracle.com/thread/2349159
    Thank you

  • I am Using Apple iPhone 4g 32gb and i have Updated to iOS 6.0 but in Maps i am not able to change the angle with two finger why so ?

    I am Using Apple iPhone 4g 32gb and i have Updated to iOS 6.0 but in Maps i am not able to change the angle with two finger why so ? I have also restored it but not getting

    I have an iPhone 4 also.  If you are referring to the flyover view, its unavailble for the iPhone4.  If you want to rotate the map, hold two fingers on the map for 2-3 seconds and rotate them in opposite directions.
    Hope this helps

  • HT4352 I'm using the correct APPLE ID and password for Home Sharing on my computer but my AppleTv is not accepting it?  What's up with that???

    I'm using the correct APPLE ID and password for Home Sharing on my computer but my AppleTv is not accepting it?  What's up with that???

    I have the exact same issue. I also tried resetting my password. I can log in to iTunes on my laptop with the new password, on to my iPhone iTunes, but my Apple TV says it cannot recognize my password. I just did an Apple Tv software update a few days ago.
    I am able to log in to Netflix on my Apple TV just fine. I did not have to re-enter my password for that.
    Very frustrating. I hope Apple can figure this out soon and post a fix.
    Thanks for any advice.  Cheers.

  • I am use to working in photoshop and i now only have pages. can you tel me how to silohuette an image. i am trying to silo a head and put it on another body. thanks!

    i am use to working in photoshop and i now only have pages. can you tel me how to silohuette an image. i am trying to silo a head and put it on another body. thanks!

    Pages is for word processing, not image editing.
    However, this may work for you >  How to Create a Silhouette Image Using FREE Photo Editing Software - Home Stories A to Z

Maybe you are looking for