Hi I need Event for removal of component from UIEditor

Hi, JDev team
I need a event to identify removal of component from UIEditor.
I have one method of doing this.Apply viewSelectionListener to the UIEditor but i can'nt use this approach for some reasons.Is there any other way out??

I'm sorry, but Apple does not provide a downgrade path for iOS. Because downgrading is unsupported by Apple we cannot discuss it on these forums.
You may leave comments at Apple Feedback.

Similar Messages

  • Exit/BAdI for removing the component from subcontracting

    Hello Friends,
            My client has a very unusual requirement. For a subcontracting PO, they wish that only the finished product GR should be posted in MIGO and the 543 movement type which is happening for the component, shouldn't take place at the same time. Right now this is automatically happening.
              Is there a BADI or exit where we can control this? It's little urgent. Any small help will be appreciated.
    Thanks & Regards,
    Shaheen

    Hello friends,
            I know my question wasn't so straight. But I found a BAdI, where I could make the quantity of the component zero. But in MIGO, when you check the checkbox 'Item_OK', right at the bottom, it selects both the items. That is the finished product and its component. Is there someway that, only Finished product should be selected?
    Awaiting a miracle!
    Regards,
    Shaheen

  • Mass Removal of component from Maintenance Order Component list

    Hi Gurus,
    I had a long list of material which have been set with deletion flag. With this list, I had remove them from BOM using CS20. Does anyone knows how to remove a component from the maintenance order component list based on that material had set deletion flag in material master & that GI had not been done? Appreciate your help.
    Best regards,
    David Tan

    I guess we dont have std function to do this..
    I will suggest to take help of an abaper & create a code to find material & delete from orders.
    Regards

  • How to remove a component from a panel

    i have a table attached to a scrollpane...the scroll pane is attached to the CENTER of a panel that have a borderlayout like this :
    JScrollpane sp = new JScrollpane(table);
    add(sp, BorderLayout.CENTER);
    how to remove the table from the center....i have tried : remove(sp); and then calling revalidate(); but that did not work....
    please help....
    Thanks in advance

    i did not try it...but i insert a repaint() after the revalidate and it seems to work...
    thanks a lot

  • Blocking event for the particular component

    Dear All,
    If we opened the modal dialog, all the other components will be blocked. That means the events generated for those components will be consumed by the EventDispatchThread. But my requirement is blocking speciifc set of components (not all in jvm ). How can i do that. Please help me in this regard.
    Thanks and Regards
    V.S.Saravanan

    You understanding of modal dialogs is not true. This is done otherwise: when you invoke modal dialog to be shown, it's method is invoked, a new new event pump is created and run. This pump services only this dialog, while, since show method is still executing, main pump is fozen. So there is no "blocking of selected components" mechanism availble in that point.
    You may however try to use protected disableEvents method of Component to block events.

  • Custom Pipeline component for Removing Trailer record from .txt file

    public Microsoft.BizTalk.Message.Interop.IBaseMessage
    Execute(Microsoft.BizTalk.Component.Interop.IPipelineContext pc,
    Microsoft.BizTalk.Message.Interop.IBaseMessage inmsg)
        IBaseMessagePart bodyPart = inmsg.BodyPart;
        Stream originalStrm = bodyPart.GetOriginalDataStream();
        StreamReader sReader =
    new StreamReader(originalStrm,
    System.Text.Encoding.UTF8);
        string sRecord = sReader.ReadToEnd();
        MemoryStream memStream =
    new MemoryStream();
        StreamWriter sw =
    new StreamWriter(memStream);
        inmsg.BodyPart.Data
    = memStream;
        inmsg.BodyPart.Data.Position
    = 0;
        //"\r\n" is the delimeter for the the record
        string[] separator
    = new string[]
    { "\r\n" };
        string[] strArray
    = sRecord.Split(separator,
    StringSplitOptions.None);
        //Loop untill the last line (i.e ignore the trailer)
        for (int n
    = 1; n < strArray.Length; n++)
            sw.Write((strArray[n
    - 1] +
    "\r\n"));
        sw.Flush();
        memStream.Flush();
        memStream.Position
    = 0;
        inmsg.BodyPart.Data
    = memStream;
        inmsg.BodyPart.Data.Position
    = 0;
        return inmsg;
    after Deploying and in Gac, when configuring Receive Pipeline, it shows no properties in Decode stage ?
    MBH

    There is nothing wrong with your code it removes the lastline, if there is no carriage return on it.
    If your input file is like:  
       line1 <cr><lf>
               line2 <cr><lf>
               line3 
    The result is: 
               line1 <cr><lf>
               line2 <cr><lf>
    But if your input file is like:
                 line1 <cr><lf>
                  line2 <cr><lf>
                  line3 <cr><if>
    The result is:
                 line1<cr><lf>
                 line2<cr><lf>
                <empty line>
    So when you have a carriage return on the last line, it results in an empty line, can this be the cause of your problem?

  • Need table for Transport Request component

    Hi,
    I need the name of the table that stores the TR name and all the Objects to be transported in them.
    Thnx in advance,
    Chirantan

    Check <b>E070</b>
    E070     Change & Transport System: Header of Requests/Tasks
    E070A     Change & Transport System: Attributes of a Request
    E070C     CTS: Source/Target Client of Requests/Tasks
    E070CREATE     Change & Transport System: Creation Date of Request
    E070DEP     Change & Transport System: Dependencies of Requests
    E070L     CTS: Index for Assigning Numbers to Requests/Tasks
    E070M     CTS: Target Development Class/Layer for Requests
    E070N     UNIX/SAP User Connection
    E070P     Path under which a C correction is created
    E070TC     Help Table for E070 for Client-Specific Imports
    E070USE     Use of Current Requests by Users
    E071     Change & Transport System: Object Entries of Requests/Tasks
    E071C     Change & Transport System: Client-Specific Lock Flag
    E071E     Lang. Transport: Positive List for Generic Object Selection
    E071K     Change & Transport System: Key Entries of Requests/Tasks
    E071KF     Change & Transport System: Nametab Information on Key Fields
    E071KFINI     Change & Transport System: Nametab Information on Key Fields
    E071L     Language Transport: Transport Information
    E07T     Change & Transport System: Short Texts for Requests/Tasks

  • Need solution for removing Bold format in HR payslip

    Dear all,
    The HR pay slip is developed using pE51 & thailand country version.
    I am calling a standard program HTHCEDT0.  
    The bold is being printed from the standard program HTHCEDT0 . Iam using remuneration statement program HTHCEDT0 to print.
    Which is resulting the print in bold.
    can we change the standard , how do we go about it.
    i would like to make the font normal.
    Using printronix printer.
    But would you be able to eloborate on how to proceed now with the printer settings.
    May be our basis consultant would be able to understand if you give us more info on this.
    would be great if you can provide a solution at the earliest.
    regards
    siva

    Select video and move it up onto color matte.
    Let go
    Pick it up again and move it to track 3
    Dont let go, hold shift and move audio to track 2
    Deselect
    Select color matte and left over audio: ripple delete.

  • Need Solution for removing the bold format HR payslip

    Dear all,
    The HR pay slip is developed using pE51 & thailand country version.
    I am calling a standard program HTHCEDT0.  
    The bold is being printed from the standard program HTHCEDT0 . Iam using remuneration statement program HTHCEDT0 to print.
    Which is resulting the print in bold.
    can we change the standard , how do we go about it.
    i would like to make the font normal.
    Using printronix printer.
    But would you be able to eloborate on how to proceed now with the printer settings.
    May be our basis consultant would be able to understand if you give us more info on this.
    would be great if you can provide a solution at the earliest.
    regards
    siva

    Select video and move it up onto color matte.
    Let go
    Pick it up again and move it to track 3
    Dont let go, hold shift and move audio to track 2
    Deselect
    Select color matte and left over audio: ripple delete.

  • What is the best practice for removing IMAPMail files from Thunderbird Profiles folder?

    I removed some old IMAP accounts via Account Settings > Remove Account. But I see that the IMAP files (Inbox, Drafts, Sent, .msf, .sbd, etc.) for the accounts are still in /Library/Thunderbird/Profiles/*.default/ImapMail. What is the proper way to delete these old account files?

    When the corresponding account has been removed, there's no association to Thunderbird anymore. The files are kept on purpose in case an account has been deleted by error.
    You should be certain that you don't need those files anymore though.
    It probably wouldn't hurt to create a backup of your profile prior to deleting the files either.

  • Powershell script for removing some users from a particular Site Collection

    Hi,
    I am looking for a PowerShell script to delete a few users from a particular Site Collection. I am unable to delete them from/_catalogs/Users/simple.aspx page therefore need some other medium to
    delete users from the site collection.
    My ultimate aim is to have no user profile with "tp_deleted" field's value as 0 in the USERINFO table. Currently there are about 40 odd users with this field's value as 0 and this is affecting my crawling of this content database.

    Thanks for the reply Alex & eHaze,
    I have a content source of root site which crawls all the site collections under it. Out of the 9 site collections, only 8 are getting crawled and 1 doesn't get crawled at all. The error in the crawl logs is 
    The SharePoint item being crawled returned an error when requesting data from the web service. ( Error from SharePoint site: Value does not fall within the expected range. )
    I tried a lot of things, searched over the net and finally found
    this which helped me solve the same issue in my development environment. I deleted these users from userInfo table and ran a full crawl. And the issue was fixed.
    Now since I cannot delete the users from userInfo table directly from PROD environment, I used .../_catalogs/Users/simple.aspx list
    to delete users from this site collection. While some of the users I could delete, quite a few I could not. Clicking on the profile redirected me to the home page rather than the info page of the profile. 
    This
    is why I have to delete these users from the site collection.
    Alex - the link you shared, I guess it is for a web application level.
    eHaze - the script you shared throws this error:
    Get-SPSite : Cannot find an SPSite object with Id or Url: http://dev-apps/divisions/BT. At C:\PowerShell Scripts\DeleteUserFromSiteCollection1.ps1:4 char:19
    + $site = get-spsite <<<< $siteURL
    + CategoryInfo : InvalidData: (Microsoft.Share...SPCmdletGetSite:
    SPCmdletGetSite) [Get-SPSite], SPCmdletPipeBindException
    + FullyQualifiedErrorId : Microsoft.SharePoint.PowerShell.SPCmdletGetSite
    You cannot call a method on a null-valued expression.
    At C:\PowerShell Scripts\DeleteUserFromSiteCollection1.ps1:9 char:27
    + $site.SiteUsers.Remove <<<< ($LoginName)
    + CategoryInfo : InvalidOperation: (Remove:String) [], RuntimeExc
    eption
    + FullyQualifiedErrorId : InvokeMethodOnNull
    hope this info helps.

  • Need code for call a report from stored produre in oracle9i(using rwclient)

    dear all,
    i need a stored procedure to run the report 9i(.rdf) from pl/sql.But i have code in older version(rwcgi60).So i want stored procedure for rwclient.
    The below code not working in oracle9i version.its very urgent.Thanks in advance..
    create table report
    (id number not null primary key,
    filename varchar2(100) not null,
    report_connection_id number not null,
    destype varchar2(5) not null)
    create table report_connection
    (id number not null primary key,
    user_id varchar2(100) not null,
    pass varchar2(100) not null,
    database_server varchar2(50) not null,
    report_server varchar2(50) not null)
    alter table cm.report add foreign key (report_connection_id) references cm.report_connection (id)
    insert into report_connection values (1, 'scott', 'tiger', 'orcl', 'Rep60_Dev');
    insert into report values (1, 'test.rdf', 1, 'PDF');
    commit;
    procedure pr_example (p_id report.id%type) is
    cursor cur_data is
    select r.filename,
    c.user_id,
    c.pass,
    r.destype,
    c.database_server,
    c.report_server
    from report r,
    report_connection c
    where r.report_connection_id = c.id
    and r.id = p_id;
    v_blob blob;
    v_url varchar2(2000);
    v_pieces utl_http.html_pieces;
    v_buffer raw(2000);
    v_buffer_size integer := 2000;
    begin
    for v_rec in cur_data loop
    v_url := 'yourserver.domain.com/dev60cgi/rwcgi60.exe?report=' || v_rec.filename || '&desformat=' ||
    v_rec.destype || '&userid=' || v_rec.user_id || '/' || v_rec.pass || '@' || v_rec.database_server ||
    '&server=' ||v_rec.report_server || '&destype=cache';
    if v_rec.destype = 'PDF' then
    owa_util.mime_header('application/pdf', false);
    htp.p('content-disposition: filename='||v_rec.filename);
    owa_util.http_header_close;
    --you can add a bunch of elsif logic here for different destypes and setting the correct mime type.
    end if;
    --sets transfer timeout to be one hour
    utl_http.set_transfer_timeout(3600);
    --runs the report
    v_pieces := utl_http.request_pieces(v_url,64000);
    v_blob := empty_blob();
    dbms_lob.createtemporary(v_blob,true);
    for i in 1 .. v_pieces.count loop
    v_buffer := utl_raw.cast_to_raw(v_pieces(i));
    v_buffer_size := utl_raw.length(v_buffer);
    if v_buffer_size > 0 then
    dbms_lob.writeappend(v_blob, v_buffer_size, v_buffer);
    end if;
    end loop;
    wpg_docload.download_file(v_blob);
    end loop;
    end;
    Now run this url:
    http://yourserver.domain.com/pls/dad_name/pr_example?p_id=1
    regards
    mani

    JosAH wrote:
    A couple of years ago Sun supplied their javax.comm package (mysteriously versioned as version 2)
    but they stopped it for the PC Windows.
    There's an alternative: rxtx which offers an identical API as Sun did and their own native implementation for serial and parallel port handling; I have used both and the rxtx version is clearly superior to Sun's old version: http://www.rxtx.org
    This question popped up recently.
    tschodt wrote in [http://forums.sun.com/thread.jspa?messageID=10863769#10863769:}
    [Java Communications API|http://java.sun.com/products/javacomm/]
    Implementations of the API are currently available for Solaris SPARC, Solaris x86, and Linux x86.follow the Download link to find
    Sun no longer offer's the Windows platform binaries of javax.comm, however javax.comm 2.0.3 can be used for the Windows platform, by using it in conjunction with the Win32 implementation layer provided by the RxTx project. To use that, download javax.comm for the 'generic' platform (which provides the front-end javax.comm API only, without platform specific back-end implementations bundled). Then acquire the Windows binary implementation rxtx-2.0.7pre1 from http://www.rxtx.org.

  • Need help for focusing the cursor from one textbox to another textbox

    hii all,
    I have a problem in java script.
    Note:The textboxes are generated dynamically.it is not having fixed length.(the number of textboxes generated may be 3,2,4....etc.it is not fixed.
    To move cursor from one textbox to another text box ,I have taken the length of the textboxes of the first column.I used onkeyDown event .
    in the function ,first i checked the condition like
    for(i=0;i<form1.box.length;i++) //box is the name of the textboxes
    if(event.keyCode==13)
    form1.box[i+1].focus();
    return false;
    by using this the cursor is moving from first text box to second textbox and stops.
    if i use event.returnValue=false; instead of return false ,then the cursor automatically going to the laxt textbox of the column.
    my problem is how i can focus the cursor from one textbox to another textbox one after the other till the end.
    if any one has solution please help me.
    also if we can do in another way also,please help me.
    thanx.>

    thanx .u helped me so much.
    i have to check another condition. see the code below
    <!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN">
    <HTML>
    <HEAD>
    <TITLE> New Document </TITLE>
    <META NAME="Generator" CONTENT="EditPlus">
    <META NAME="Author" CONTENT="">
    <META NAME="Keywords" CONTENT="">
    <META NAME="Description" CONTENT="">
    </HEAD>
    <SCRIPT language="Javascript">
    function fnTest(str) {
    if(event.keyCode==13) {
    if(str == 4) {
    formHeader.box[0].focus();
    else {
    formHeader.box[parseInt(str)+1].focus();
    return false;
    </SCRIPT>
    <BODY>
    <FORM name="formHeader">
    <CENTER>
    <INPUT TYPE="TEXT" name="box" value="" onKeyDown="javascript:fnTest('0');">
    <br>
    <INPUT TYPE="TEXT" name="box" value="" onKeyDown="javascript:fnTest('1');">
    <br>
    <INPUT TYPE="TEXT" name="box" value="0" disabled="false" onKeyDown="javascript:fnTest('2');">
    <br>
    <INPUT TYPE="TEXT" name="box" value="" onKeyDown="javascript:fnTest('3');">
    <br>
    <INPUT TYPE="TEXT" name="box" value="" onKeyDown="javascript:fnTest('4');">
    </CENTER>
    </FORM>
    </BODY>
    </HTML>
    suppose if some of the fields are disabled,then the focus must skip to the next one.i have written disabled for box2.if the cursor focuses in box1,then the cursor should move to box3 escaping box2.
    if u know plz tell me.

  • Need information for file type conversion from Oracle

    Hi,
    I need a scenario where there is third party tool which supports file types (.lnb (Link Notebook Chart),.anb(Analyst Notebook Analytical Chart),.anx(Analyst Notebook Exchange Chart),.tcv(Text Chart Visualisation))
    I am having a Oracle database where I want to create a file from a Table so that the third party tool could understand
    the file supported types.
    Any help will be benefitial for me
    Thanks and Regards

    Hi,
    If I use as:
    DECLARE
    fileHandler UTL_FILE.FILE_TYPE;
    BEGIN
    fileHandler := UTL_FILE.FOPEN('test_dir', 'test_file.tcv', 'W');
    UTL_FILE.PUTF(fileHandler, 'Writing TO a file\n');
    UTL_FILE.FCLOSE(fileHandler);
    EXCEPTION
    WHEN utl_file.invalid_path THEN
    raise_application_error(-20000, 'ERROR: Invalid PATH FOR file.');
    END;
    If I use the file naming convention i.e extension type as .tcv will it support ?
    Thanks and Regards

  • Suggestions for removing video noise from converted Hi8 footage

    I am about to start capturing Hi8 material into FCP 6 through a Sony D8 camcorder that does the analog to digital conversion. Even after cleaning the tape heads, I notice a very few lines of noise at the very bottom of the frames - like a dirty head. From the camcorder side everything looks normal - no noise. From the FCP side in VTR mode you can see the noise. I am not sure if this is an artifact from the analog to digital transfer or if the tape head is still dirty.
    Question: assuming I cannot eliminate the noise on transfer/input, is there an easy way to apply a universal filter or horizontal "clip" function to imported video to remove the bottom few lines of video? I guess I could always overlay a black canvas covering only a few lines on the bottom, but maybe there is a more elegant solution?
    Thanks in advance for any counsel!

    What you are seeing are timing errors that are an artifact of analog recording and generally are outside the viewable area of a CRT TV (i.e. in the overscan zone). If you are setting these up for digital presentation - web or computer play only, these items may be seen.
    You have a couple of options to deal with the tearing ..
    • Recapture the material using a Hi8 deck and a separate analog/DV converter with a full frame Time Base Corrector between the tape machine and the analog/DV converter. This will clean up the timing errors but is an expensive proposition.
    • Crop the image. This will leave a very slight letterbox effect and may not be noticeable unless you mix the material with non-cropped material.
    • Slightly enlarge the material so that the tearing falls outside of the 720x480 area. Expanding images much beyond 110% softens/pixelates the images noticeably and my not be acceptable.
    • Live with it.
    Good luck.
    x

Maybe you are looking for