Hi I've noticed many of the standard video transitions from CC didn't carry over to 2014 can these be imported?
Hi I've noticed many of the standard video transitions from CC didn't carry over to 2014 can these be imported? 3D,2D its very much bare bones now and I was fairly used to using several of those. The ones I purchased carried over. Thanks
Ok, I'll leave keep connected to the test socket then, current router stats are as follows
DSL Line (Wire Pair):
Line 1 (inner pair)
Protocol:
G.DMT
Downstream Rate:
1184 kbps
Upstream Rate:
448 kbps
Channel:
Interleaved
Current Noise Margin:
24.0 dB (Downstream), 24.0 dB (Upstream)
Current Attenuation:
21.1 dB (Downstream), 12.0 dB (Upstream)
Current Output Power:
17.2 dB (Downstream), 11.9 dB (Upstream)
DSLAM Vendor Information:
Country: {F} Vendor: {ALCB} Specific: {0}
PVC Info:
0/38
Speedtester is reporting
Download speedachieved during the test was - 355 Kbps
For your connection, the acceptable range of speeds is 50-500 Kbps.
Additional Information:
Your DSL Connection Rate :1184 Kbps(DOWN-STREAM), 448 Kbps(UP-STREAM)
IP Profile for your line is - 500 Kbps
Kitz reports that my IP profile should be at 1 mbps (http://www.kitz.co.uk/adsl/IPprofile.htm) but I was syncing at about 600 kbps earlier today before I accidently reset my router (pulled a wire I didn't mean to pull. ) After the reset my sync jumped to the current 1184 so it's probably still readjusting, noise started at 9 dB but rose to about 20, before rising to 24 later tonight. I'm pretty sure my house doesn't have any internal wiring issues, but I suppose it's better safe than sorry. Regarding why my noise margin is currently so high, I don't know for sure but when I was first having issues I'm pretty sure I remember my IP profile being stuck at 135 kbps while I was syncing at about 1 mbps, I don't know if this could have contributed. My IP profile seems to be behaving fine now, though.
Anyway, thanks once again,
carrotworks
Similar Messages
-
I want to transfer the Video Transitions fro premier Pro to my new project in Premier Pro CC 2014 what can I do? My e-mail is( [email protected] )
Hi
How did you "transfer" Express?
It might be better to re-install Express 9 from scratch, though without an Optical drive you would need to:
a) Use an external Optical drive
b) Make a disk image of the installer on another computer and then copy that image to the rMBP
c) Make use of Apple's Remote Disk
http://support.apple.com/kb/HT5287
CCT -
Siri says she can't read my email from the iphone5s lock screen when I'm using the standard headphones, but I could do that on 4s. How can I get my 5s to do that?
Hi Liz,
Sorry to hear you are having a similar problem. Last night I went to the tool bar at the top of iphoto, clicked on "File", then clicked "Browse Backups" in the drop down menu. I have an external hard drive that is set up to Time Machine. The Browse Backups opened the iphoto pages in the Time Machine. I selected a date one day ahead of the day I performed the now infamous update, and it showed my iphoto library as it had existed that day. I then clicked "Restore Library" at the bottom right corner of the Time Machine screen. Roughly 2 hours later my iphoto was back to normal. When I opened iphoto there was a message saying I need to upgrade my program to be compatible with the new version of iphoto(version 9.2.1). I clicked "Upgrade" and within seconds it had done whatever upgrading it needed to do.
The only glitch in the restoration was that it restored the library as it appeared last week, so I no longer had photos I had imported this past weekend. I simply went back to the Browse Backups in the drop down menu, when Time Machine opened I selected the page showing my pictures from this weekend and again said to Restore Library. Roughly 45 minutes later the library was restored including the most recent photos.
I am now a happy camper.
I don't know if any of this will be of help to you because your email says you are having trouble with photos imported after the upgrade was performed. Have you had any pop up notices when you first open iphoto, that tell you you need an upgrade to be compatible with the new iphoto? If so have you clicked "upgrade"?
Good luck Liz, if you have Time Machine running as a back up to your library, maybe you wil be able to get help there, by following my instructions above. Otherwise, good luck with your investigations. I'd be interested in hearing how you make out.
Karen -
i am having problems exporting my time lapses from quick time pro i need to save my files as photo jpegs but the standard video compression window will not open fully, it just keeps my mac (old 1.6Ghz 2.5 GB sdram G5 still good for most stuff i need) spinning for ever but i can see compression type H.264 selected and the other setting but i can not select any other options as it still thinking but never opens! why is this happening how do i get round it?
my work flow is: 300 images shot on a 5d mark II medium jpegs opened in Light Room cropped to 16:9 then exported and opened in quick time i can save a .mov H264 giving me files sizes of 14 mb for a 16 second time lapse, mp4 9 mb. the only way i can get large files is saving as a self contained movie then i get 300mb files.
i need to save my files 1920 x 1080 photo jpeg codec as i want HD quality.
i am sure there is a simple way round this?
thanks guys!It is very difficult to offer troubleshooting suggestions when the "os version" you are using is unknown as each os has their own troubleshooting solutions.
How large is your hard drive and how much hard drive space do you have left? -
I used to have eight genius mixes and now I have four...I changed the genres around and nothing happened...I've added many more songs since it changed from 8 to 4 mixes...how can I get more again and why did it go from 8 to 4? I had the Hardcore mix and a rap mix and classic rock and grunge mixes...now I don't...I kinda want those back...the mixes I have now make no sense as most the songs on each do not correlate AT ALL to the genre mix they have been placed in. If someone could give me an answer that'd be great.
1. Don't confuse "Apple ID" with iTunes Account ID. You can have many Apple IDs but only one iTunes account active at a time.
2. If you "changed" your iTunes account ID, you actually have 2 accounts - one under the old name plus the new name.
3. You can't merge the accounts - they remain separate. Apps purcahsed under the old account name will update ONLY WHEN THE PHONE IS SIGNED IN TO THE OLD ACCOUNT NAME and visa versa.
4. Likewise, you can sync only the apps, music, media purchased under the account the phone AND iTunes are signed in to. -
What is the standard Video Preview Dimensional size of Webinar?
Please anybody tell me what is the standard video preview size of webinar? I mean pixels x pixels
Regards
Abhishek ThakurIt matches the media that you are editing.
-
I have set up a second iTunes user account on my PC, but when I create the new iTunes account it copies the music, videos etc from the original account and they seem to be linked, so that when I delete a song from one library it deletes from the other one.
On the online tutorials I've seen it shows that when you create a new iTunes library it should open as a blank account, but that isn't happening.
What am I doing wrong?If you have iTunes 11 turn on the Sidebar. Go to iTunes>View and click on Show Sidebar. You can also do a Crtl+S to show the sidebar. The sidebar is where Devices appears. and Control+B to show the Menu bar
If necessary:
iOS: Device not recognized in iTunes for Windows
or
iOS: Device not recognized in iTunes for Mac OS X -
I have a Mac Pro with four hard drives. I currently have Lion installed on one hard drive. I want to have the option to boot from either Lion or Snow Leopard. How can I do this?
It's best to install Snow Leopard on one of the three remain drives without an Operating System.
You can then install the applications you need from the original media. Create a User Account using Setup Assistant.
Do you want to migrate User Accounts from the OSX LIon boot drive, or are you keeping the User Accounts separate?
Dual-booting just requires holding the option key during startup and selecting either Lion or Snow Leopard. -
HT1694 The text has disappeared from my emails in my inbox. What can I do to get the text back?
The text has disappeared from my emails in my inbox. What can I do to get the text back?
Try closing the Mail app via the taskbar and see if the email text shows when you re-open the app : from the home screen (i.e. not with the Mail app 'open' on-screen) double-click the home button to bring up the taskbar, then press and hold any of the apps on the taskbar for a couple of seconds or so until they start shaking, then press the '-' in the top left of the Mail app to close it, and touch any part of the screen above the taskbar so as to stop the shaking and close the taskbar.
If that doesn't fix it they try a reset : press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider), after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot. -
I have an iMac and I want to use it as WLAN Hotspot. But I miss Airport in the overview to choose from. What is wrong? And who can help me?
Hello Mark,
Have you done these 2 things?
Under he Airport icon choose Create Network...
And in System Preferences>Sharing, have you setup & enabled Internet Sharing? -
Error in the standard htmlb.jar from EP6 SP9 (HTMLx)
I've successfully migrated my custom developed applications from EP5 SP5 to EP6 SP9. I've used the well known 3rd party
HTMLxframework for the DatePicker and Locale corrections only (I am a brazilian developer).
In the org.sapportals.htmlb.rendering there is a class named RenderUtil.
This class has two places with this specific code:
ResourceBundle r = ResourceBundle.getBundle("java.text.resources.LocaleElements", locale);
Which is very wrong as the "java.text.resources.LocaleElements" is available only until j2sdk 1.3. In the EP5 that runs under 1.3 there's no problem but EP6 uses j2sdk 1.4 and this packages has been relocated from the standard package to a "ext" (extension) package and been renamed as "sun.text.resources.LocaleElements".
So, as HTMLx uses this RenderUtil class, I had to decompile the original from the htmlb.jar using JAD and corrected the above line with the following new line or code:
ResourceBundle r = ResourceBundle.getBundle("sun.text.resources.LocaleElements", locale);
More than that, I had to change several places of the HTMLx's HxInputFieldRenderer to reflect the class name changes made to the CSSs of the EP6. In the new version SAP does not open a pop-up window for the DatePicker. Instead they chose to rewrite it as a dynamic layer. So the HTMLx code has to change to reflect that.
Here follows the workaround version of HxInputFieldRenderer.java (notice that some strings are not internationalized, I just copied and pasted the parts I needed, so it's not a definitive version, but will help you get a clue of what to do):
* HxInputFieldRenderer.java
* Copyright (C) 2003 Alan Hobbs
* This library is free software; you can redistribute it and/or
* modify it under the terms of the GNU Lesser General Public
* License as published by the Free Software Foundation; either
* version 2.1 of the License, or (at your option) any later version.
* This library is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
* Lesser General Public License for more details.
* You should have received a copy of the GNU Lesser General Public
* License along with this library; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
package org.open.sapportals.htmlx.rendering;
import javax.servlet.jsp.PageContext;
import org.open.sapportals.htmlx.HxField;
import org.open.sapportals.htmlx.HxInputField;
import org.open.sapportals.htmlx.HxLocaleUtil;
import com.sapportals.htmlb.Component;
import com.sapportals.htmlb.Form;
import com.sapportals.htmlb.InputField;
import com.sapportals.htmlb.enum.DataType;
import com.sapportals.htmlb.enum.InputFieldDesign;
import com.sapportals.htmlb.enum.ResourceType;
import com.sapportals.htmlb.rendering.DefaultInputFieldRenderer;
import com.sapportals.htmlb.rendering.IPageContext;
import com.sapportals.htmlb.type.AbstractDataType;
import com.sapportals.htmlb.type.DataDate;
import com.sapportals.htmlb.type.DataString;
import com.sapportals.htmlb.type.Date;
import com.sapportals.portal.prt.component.IPortalComponentRequest;
import com.sapportals.portal.prt.component.IPortalComponentResponse;
import com.sapportals.portal.prt.logger.ILogger;
import com.sapportals.portal.prt.runtime.PortalRuntime;
import com.sapportals.portal.prt.service.urlgenerator.IUrlGeneratorService;
import com.sapportals.portal.prt.service.urlgenerator.specialized.IPortalUrlGenerator;
import com.sapportals.portal.prt.service.urlgenerator.specialized.ISpecializedUrlGenerator;
* @author Alan.Hobbs
* To change the template for this generated type comment go to
* Window>Preferences>Java>Code Generation>Code and Comments
* Render the HxInputField.
* Version Date Author Description
* 0.1.0 1-Aug-2003 AHobbs Origional
* 0.1.0 4-Aug-2003 AHobbs Added resource bundle
* 0.1.1 6-Aug-2003 AHobbs Write hidden fields to store the locale
* 0.1.1 8-Aug-2003 AHobbs Don't show the date picker button if the field is disabled
* 0.1.2 10-Aug-2003 AHobbs Only generate the month and day name javascript once per form
* 1.1.0 1-Apr-2004 AHobbs Added render methods to allow a HTMLB InputField
* to be used instead of a HxInputField
* 1.1.0 6-Apr-2004 AHobbs Changed the names for the hidden fields to "_HTMLX_xxxxx"
* 1.1.0 20-Apr-2004 AHobbs Allow debug code to be written to the console with System.out.println()
* 1.3.0 4-May-2004 AHobbs Added PopUp rendering
public class HxInputFieldRenderer extends DefaultInputFieldRenderer {
protected ILogger m_logger = PortalRuntime.getLogger("htmlx");
private static boolean writingDebugToConsole;
public HxInputFieldRenderer() {
super();
public void render(Component component, IPageContext pc)
m_logger.info("Entry: HxInputFieldRenderer.render()");
if (!(component instanceof HxInputField)) {
m_logger.warning(
"HxInputFieldRenderer.render() component is not instanceof HxInputField " +
"(component.getClass().getName()='" + component.getClass().getName() + "')");
return;
HxInputField inf = (HxInputField)component;
DataType type = inf.getType();
if (writingDebugToConsole) {
System.out.println("Start rendering HxInputField (id='" + inf.getId() + "') ...");
m_logger.info(" id='" + inf.getId() + "'");
m_logger.info(inf.toString());
/* Only include for PDK version 5.0.5.0 and above - may not be required ???
// m_logger.info(" VersionInfo.getVersion()='" + VersionInfo.getVersion() + "'");
// if (VersionInfo.?????) {
// if (pc.isUsingSession() && !inf.isVisible() && inf.getParkInSession()) {
// String uniqueName = pc.getParamIdForComponent(inf);
// Object value = inf.getValue();
// String valueString = null;
// if (value != null) {
// if (value instanceof AbstractDataType) {
// AbstractDataType dataValue = (AbstractDataType)value;
// if (dataValue != null)
// if (dataValue.isValid())
// valueString = dataValue.toString(pc);
// else
// if (dataValue instanceof DataString)
// valueString = dataValue.toString(pc);
// else
// valueString = dataValue.getValueAsString();
// else {
// valueString = value.toString();
// else {
// valueString = "";
// pc.getParamList().put(uniqueName, valueString);
// return;
boolean showDateHelp = false;
if (DataType.DATE.equals(type)
&& inf.isShowHelp()
&& !inf.isDisabled()) {
showDateHelp = true;
boolean showPatternHint = false;
if (inf.isShowPatternHint()
&& (DataType.DATE.equals(type)
|| DataType.TIME.equals(type))
|| ((inf.getPatternHint() != null) && (inf.getPatternHint().length() > 0))) {
showPatternHint = true;
boolean showStatusMsg = false;
if (inf.isShowStatusMsg() && (inf.getStatusMsg() != null) && (inf.getStatusMsg().length() > 0)) {
showStatusMsg = true;
if (showDateHelp || showPatternHint || showStatusMsg) {
pc.write("<table cellspacing="0" cellpadding="0" border="0" id="");
pc.write(""><tr><td>");
String uniqueName = pc.getParamIdForComponent(inf);
if (inf.isVisible()) {
pc.write("<span id="");
pc.write(uniqueName);
pc.write("-r" class="urEdfHelpWhl">");
if (inf.isPassword())
pc.write("<input type="password" class="sapEdf");
else
pc.write("<input type="text" class="sapEdf");
if (inf.isInvalid())
pc.write("i");
if (inf.isRequired())
pc.write("Req");
else
pc.write("Txt");
if (inf.isDisabled())
pc.write("Dsbl");
else
pc.write("Enbl");
if (inf.getDesign() == InputFieldDesign.SMALL)
pc.write("Sml");
pc.write("" autocomplete="off");
int mySize = inf.getSize();
if (mySize > 0) {
pc.write("" size="");
pc.write(mySize);
int maxlength = inf.getMaxlength();
if (maxlength > 0) {
pc.write("" maxlength ="");
pc.write(maxlength);
java.lang.String value = inf.getWidth();
if (value != null && !"".equals(value)) {
pc.write("" style="width:");
pc.write(value);
pc.write(";");
java.lang.String tooltip = inf.getTooltip();
if (tooltip != null) {
pc.write("" title="");
pc.writeEncoded(tooltip);
pc.write(" onchange="return htmlbDoEvent(this,'TV','onchange','0','");
pc.write(uniqueName);
pc.write("',1,1,'',0);" ");
pc.write(" onblur="return htmlbDoEvent(this,'TV','onblur','0','");
pc.write(uniqueName);
pc.write("',1,1,'',0);" ");
if(inf.isDisabled())
pc.write("" readonly="");
else {
pc.write("<input type="hidden");
pc.write("" name="");
pc.write(uniqueName);
if (inf.isLabeled()) {
pc.write("" id="");
pc.write(uniqueName);
Object value = inf.getValue();
pc.write("" value="");
if (value != null) {
String valueString = null;
if (value instanceof AbstractDataType) {
m_logger.info("-- Abstract Data Type");
AbstractDataType dataValue = (AbstractDataType)value;
if (dataValue != null) {
m_logger.info("-- dataValue != null");
if (dataValue.isValid()) {
m_logger.info("-- dataValue.isValid()");
if (dataValue instanceof DataDate) {
m_logger.info("-- dataValue instanceof DataDate");
Date date = ((DataDate)dataValue).getValue();
valueString = HxLocaleUtil.formatDate(date, pc.getLocale());
else {
m_logger.info("-- NOT dataValue instanceof DataDate");
valueString = dataValue.toString(pc);
else if (dataValue instanceof DataString) {
m_logger.info("-- dataValue instanceof DataString");
valueString = dataValue.toString(pc);
else {
m_logger.info("-- dataValue.getValueAsString()");
valueString = dataValue.getValueAsString();
else {
// Not Abstract Data Type
m_logger.info("-- Not Abstract Data Type");
valueString = value.toString();
pc.writeEncoded(valueString);
pc.write(""/>");
if (showDateHelp) {
String dateFormat = HxLocaleUtil.getSapDatePatternNumber(pc.getLocale());
pc.write("</td><td align='left'><button id='");
pc.write(uniqueName);
pc.write("-btn' type="button" tabindex="-1" ti="-1" class="urEdfHlpDate" onclick="htmlb_showDateHelp(event,'");
pc.write(uniqueName);
pc.write("','");
pc.write(dateFormat);
pc.write("','1')"></button>");
pc.write("<script>htmlb_addTexts('pt_BR',{SAPUR_OCTOBER:"Outubro",SAPUR_MSG_LOADING:"Processo de carga em andamento"," +
"SAPUR_SUNDAY_ABBREV:"Do",SAPUR_F4FIELD_TUTOR:"Pressionar F4 para exibir as entradas possíveis"," +
"SAPUR_INVALID:"Não válido",SAPUR_FEBRUARY:"Fevereiro",SAPUR_F4FIELD:"F4- campo de entrada"," +
"SAPUR_FRIDAY_ABBREV:"6ª",SAPUR_WEDNESDAY_ABBREV:"4ª",SAPUR_MAY:"Maio",SAPUR_MSG_WARNING:"Advertência"," +
"SAPUR_DECEMBER:"Dezembro",SAPUR_SEPARATOR:"-",SAPUR_MSG_SUCCESS:"Com êxito",SAPUR_SATURDAY_ABBREV:"Sa"," +
"SAPUR_THURSDAY_ABBREV:"5ª",SAPUR_MSG:"{0} {1} {2}",SAPUR_BUTTON_WHL:"{0} - {1} - {2} - {3}",SAPUR_JULY:"Julho"," +
"SAPUR_APRIL:"Abril",SAPUR_FIELD_TIME:"Hora",SAPUR_MSG_ERROR:"Erro",SAPUR_REQUIRED:"Necessário"," +
"SAPUR_BUTTON_WHL3:"{0} - {1} - {2}",SAPUR_SEPTEMBER:"Setembro",SAPUR_NOVEMBER:"Novembro",SAPUR_AUGUST:"Agosto"," +
"SAPUR_JANUARY:"Janeiro",SAPUR_BUTTON:"Botão",SAPUR_FIELD_PW:"Senha",SAPUR_FIELD:"Texto editável"," +
"SAPUR_DISABLED:"Não disponível",SAPUR_FIELD_DATE:"Data",SAPUR_MARCH:"Março",SAPUR_FIELD_NUMBER:"N°"," +
"SAPUR_MSG_STOP:"Stop",SAPUR_BUTTON_WHL4:"{0} - {1} - {2} - {3}"," +
"SAPUR_BUTTON_ENABLED:"Para ativar, utilizar a barra de espaço",SAPUR_TUESDAY_ABBREV:"3ª",SAPUR_READOLNY:""," +
"SAPUR_MSG_JUMPKEY:"Pressionar a barra de espaço para navegar para o campo correspondente",SAPUR_JUNE:"Junho"," +
"SAPUR_MONDAY_ABBREV:"2ª"});</script>");
if (showPatternHint) {
String pattern = "";
String patternTooltip = "";
if (DataType.DATE.equals(type)) {
pattern = HxLocaleUtil.getDatePatternInLocaleLanguage(pc.getLocale());
patternTooltip = HxLocaleUtil.formatHxMsg(pc.getLocale(), "HxInputField.DatePatternTooltip", pattern);
else if (DataType.TIME.equals(type)) {
pattern = HxLocaleUtil.getTimePatternInLocaleLanguage(pc.getLocale());
patternTooltip = HxLocaleUtil.formatHxMsg(pc.getLocale(), "HxInputField.TimePatternTooltip", pattern);
pattern = " " + pattern;
else if ((inf.getPatternHint() != null) && (inf.getPatternHint().length() > 0)) {
pattern = " " + inf.getPatternHint();
patternTooltip = HxLocaleUtil.formatHxMsg(pc.getLocale(), "HxInputField.PatternTooltip", pattern);
pc.write("</td><td align='left'>");
pc.write("<span class='sapTxtLeg' title='" + patternTooltip + "'><nobr>");
pc.write("<font color='666666' face='Microsoft Sans Serif' style='vertical-align:super' size='1'><b>" + pattern + "</b></font>");
pc.write("</nobr></span>");
if (showStatusMsg) {
if (inf.getStatusMsgPosition().equalsIgnoreCase("RIGHT")) {
pc.write("</td><td align='left'>");
pc.write("<font color='990000' face='Microsoft Sans Serif' size='1'>");
else if (inf.getStatusMsgPosition().equalsIgnoreCase("BELOW")) {
pc.write("</td></tr><tr>");
if (showDateHelp && showPatternHint) {
pc.write("<td align='left' colspan='3'>");
else if (showDateHelp ^ showPatternHint) { // '^' is Exclusive OR (XOR)
pc.write("<td align='left' colspan='2'>");
else {
pc.write("<td align='left'>");
pc.write("<font color='990000' face='Microsoft Sans Serif' style='verticle-align:super' size='1'>");
pc.write("<nobr>" + inf.getStatusMsg() + "</nobr>");
pc.write("</font>");
if (showDateHelp || showPatternHint || showStatusMsg) {
pc.write("</td></tr></table>");
// Generate code to store the current Locale in the HTML form,
// and make the month and day names available in javascript arrays.
// The form's Language attribute is used as a flag so that this is only
// done once for each form.
Form form = pc.getCurrentForm();
if ((form.getLanguage() == null)
|| (!form.getLanguage().equals(pc.getLocale().toString()))) {
// Save the locale in the html form as hidden fields so that the
// same locale can be used to parse returned data.
pc.write("<input type="hidden" name="_HTMLX_LANGUAGE_" value="" + pc.getLocale().getLanguage() + "">");
pc.write("<input type="hidden" name="_HTMLX_COUNTRY_" value="" + pc.getLocale().getCountry() + "">");
pc.write("<input type="hidden" name="_HTMLX_VARIANT_" value="" + pc.getLocale().getVariant() + "">");
// Write javascript arrays of month and day names in the locale language
StringBuffer sb = new StringBuffer(250);
String javaScriptPath = pc.getJavascriptPath();
sb.append("var javaScriptPath='");
sb.append(javaScriptPath);
sb.append("';");
java.lang.String dayNames[] = RenderUtil.getDayAbbreviations(pc.getLocale());
if (dayNames.length != 7) {
throw new IllegalStateException("Only locales with 7 days are supported!");
sb.append("var htmlbDayNames = new Array('");
for (int i = 0; i < 6; i++) {
sb.append(dayNames<i>);
sb.append("','");
sb.append(dayNames[6]);
sb.append("');n");
sb.append("var htmlbMonthNames = new Array('");
java.lang.String monthNames[] = RenderUtil.getMonthNames(pc.getLocale());
for (int i = 0; i < 11; i++) {
sb.append(monthNames<i>);
sb.append("','");
sb.append(monthNames[11]);
sb.append("');n");
java.lang.String jscript = sb.toString();
pc.getDocument().getIncludes().addBodyEndResource(ResourceType.DIRECTJSCRIPT, "HTMLB_INPUTFIELD_DATEHELP", jscript);
// Set the language in the form so we don't do this again
form.setLanguage(pc.getLocale().toString());
if (writingDebugToConsole) {
System.out.println("Finished rendering HxInputField (id='" + inf.getId() + "')");
m_logger.info("Exit: HxInputFieldRenderer.render()");
// Methods to allow the Standard HTMLB InputField to Mimic HxInputField
// The key idea here is to use the standard InputField ONLY as a String
// field (never Date) so that we have total control over the display format
// and then HTMLX looks after ofrmating the string, abd displaying the
// help icons, status messages etc.
* Render the HTML placed before a HTMLB InputField, an InputField,
* and the code placed after the InputFIeld, so that it behaves like a
* HTMLX HxInputField
* @param field
* @param pc
public static InputField mimicRender(HxField hxField, IPageContext pc) {
HxInputField hxInputField = new HxInputField(hxField, pc.getLocale());
return mimicRender(hxInputField, pc);
* Render the HTML placed before a HTMLB InputField, an InputField,
* and the code placed after the InputFIeld, so that it behaves like a
* HTMLX HxInputField
* @param field
* @param pc
public static InputField mimicRender(HxInputField hxInputField, IPageContext pc) {
// Render stuff before InputField
renderBeforeInputTag(hxInputField, pc);
// Render InputField
InputField inputField = new InputField(hxInputField.getId());
setUpInputField(hxInputField, inputField, pc);
// This is a kludge to make a field read only. It is achieved by
// adding the flag to the 'width' attribute. HTMLB then unknowingly
// adds the flag when it renders the 'width' attribute.
if (hxInputField.isReadOnly()) {
inputField.setWidth( inputField.getWidth() + ";" readonly="");
inputField.render(pc);
String uniqueName = pc.getParamIdForComponent(inputField);
String popUpKeyUniqueName = "";
// If the field has a Pop Up add a hidden field for the Key populated by the Pop Up
if (hxInputField.isShowPopUp()) {
InputField keyInputField = new InputField(hxInputField.getId() + "PopUpKey");
keyInputField.setVisible(false);
keyInputField.setValue(hxInputField.getPopUpKeyValue());
keyInputField.render(pc);
popUpKeyUniqueName = pc.getParamIdForComponent(keyInputField);
// Render stuff after InputField
renderAfterInputTag(hxInputField, pc, uniqueName, popUpKeyUniqueName);
return inputField;
* Render the HTML to be placed before a HTMLB InputField so that it
* behaves like a HTMLX HxInputField
* @param field
* @param pc
public static void renderBeforeInputTag(HxField field, IPageContext pc) {
renderBeforeInputTag(new HxInputField(field), pc);
* Render the HTML to be placed before a HTMLB InputField so that it
* behaves like a HTMLX HxInputField
* @param inf
* @param pc
public static void renderBeforeInputTag(HxInputField inf, IPageContext pc)
if (writingDebugToConsole) {
System.out.println("Start rendering mimic HxInputField (id='" + inf.getId() + "') ...");
if (showDateHelp(inf) || showPopUp(inf) || showPatternHint(inf) || showStatusMsg(inf)) {
pc.write("<table cellspacing="0" cellpadding="0" border="0" id="");
pc.write(""><tr><td>");
* Set a HMTLB InputField with the values stored in the HxField.
* This makes for less code in the JSP, and some versions of the PDK/EP
* do not support some paramters in the TAG (e.g. Tooltip)
* @param hxField
* @param myContext
* @param pageContext
public static InputField setUpInputField(HxField hxField, IPageContext pc, PageContext pageContext) {
Component component = (Component)pageContext.getAttribute(hxField.getId());
if (!(component instanceof InputField)) {
String msg =
"HxInputFieldRenderer.setUpInputTag() component is not instanceof InputField " +
"(hxField.getId()='" + hxField.getId() + "' " +
" component.getClass().getName()='" + component.getClass().getName() + "')";
PortalRuntime.getLogger("htmlx").severe(msg);
throw new IllegalArgumentException(msg);
InputField inf = (InputField)pageContext.getAttribute(hxField.getId());
setUpInputField(hxField, inf, pc);
return inf;
* Set a HMTLB InputField with the values in the HxField.
* This makes for less code in the JSP, and some versions of the PDK/EP
* do not allow you to set some paramters in the TAG (e.g. Tooltip)
* @param hxField
* @param myContext
* @param pageContext
public static void setUpInputField(HxField hxField, InputField inf, IPageContext pc) {
inf.setDisabled(hxField.isDisabled());
inf.setInvalid(hxField.isInvalid());
inf.setMaxlength(hxField.getMaxLength());
inf.setRequired(hxField.isRequired());
inf.setShowHelp(false);
inf.setTooltip(hxField.getTooltip());
inf.setType(DataType.STRING);
inf.setValue(hxField.getValueAsString(pc.getLocale()));
inf.setVisible(hxField.isVisible());
inf.setSize(hxField.getMaxLength());
* Set a HMTLB InputField with the values stored in the HxField.
* This makes for less code in the JSP, and some versions of the PDK/EP
* do not support some paramters in the TAG (e.g. Tooltip)
* @param hxField
* @param myContext
* @param pageContext
public static void setUpInputField(HxInputField hxInputField, InputField inf, IPageContext pc) {
inf.setDisabled(hxInputField.isDisabled());
inf.setInvalid(hxInputField.isInvalid());
inf.setMaxlength(hxInputField.getMaxlength());
inf.setRequired(hxInputField.isRequired());
inf.setShowHelp(false);
inf.setTooltip(hxInputField.getTooltip());
inf.setType(DataType.STRING);
inf.setValue(hxInputField.getPreformattedValueAsString());
inf.setVisible(hxInputField.isVisible());
inf.setSize(hxInputField.getSize());
* Render the HTML to be placed after a HTMLB InputField so that it
* behaves like a HTMLX HxInputField
* @param field
* @param myContext
* @param pageContext
public static void renderAfterInputTag(HxField field, IPageContext pc, PageContext pageContext) {
renderAfterInputTag(new HxInputField(field), pc, pageContext);
* Render the HTML to be placed after a HTMLB InputField so that it
* behaves like a HTMLX HxInputField
* @param inf
* @param myContext
* @param pageContext
public static void renderAfterInputTag(HxInputField inf, IPageContext pc, PageContext pageContext) {
Component component = (Component)pageContext.getAttribute(inf.getId());
String uniqueName = pc.getParamIdForComponent(component);
String popUpKeyUniqueName = "";
if (inf.isShowPopUp()) {
component = (Component)pageContext.getAttribute(inf.getId() + "PopUpKey");
popUpKeyUniqueName = pc.getParamIdForComponent(component);
renderAfterInputTag(inf, pc, uniqueName, popUpKeyUniqueName);
* Render the HTML to be placed after a HTMLB InputField so that it
* behaves like a HTMLX HxInputField
* @param inf
* @param pc
* @param uniqueName
* @param popUpKeyUniqueName
public static void renderAfterInputTag(
HxInputField inf,
IPageContext pc,
String uniqueName,
String popUpKeyUniqueName)
if (showDateHelp(inf)) {
String dateFormat = HxLocaleUtil.getSapDatePatternNumber(pc.getLocale());
pc.write("</td><td align='left'><button id='");
pc.write(uniqueName);
pc.write("-btn' type="button" tabindex="-1" ti="-1" class="urEdfHlpDate" onclick="htmlb_showDateHelp(event,'");
pc.write(uniqueName);
pc.write("','");
pc.write(dateFormat);
pc.write("','1')"></button>");
pc.write("<script>htmlb_addTexts('pt_BR',{SAPUR_OCTOBER:"Outubro",SAPUR_MSG_LOADING:"Processo de carga em andamento"," +
"SAPUR_SUNDAY_ABBREV:"Do",SAPUR_F4FIELD_TUTOR:"Pressionar F4 para exibir as entradas possíveis"," +
"SAPUR_INVALID:"Não válido",SAPUR_FEBRUARY:"Fevereiro",SAPUR_F4FIELD:"F4- campo de entrada"," +
"SAPUR_FRIDAY_ABBREV:"6ª",SAPUR_WEDNESDAY_ABBREV:"4ª",SAPUR_MAY:"Maio",SAPUR_MSG_WARNING:"Advertência"," +
"SAPUR_DECEMBER:"Dezembro",SAPUR_SEPARATOR:"-",SAPUR_MSG_SUCCESS:"Com êxito",SAPUR_SATURDAY_ABBREV:"Sa"," +
"SAPUR_THURSDAY_ABBREV:"5ª",SAPUR_MSG:"{0} {1} {2}",SAPUR_BUTTON_WHL:"{0} - {1} - {2} - {3}",SAPUR_JULY:"Julho"," +
"SAPUR_APRIL:"Abril",SAPUR_FIELD_TIME:"Hora",SAPUR_MSG_ERROR:"Erro",SAPUR_REQUIRED:"Necessário"," +
"SAPUR_BUTTON_WHL3:"{0} - {1} - {2}",SAPUR_SEPTEMBER:"Setembro",SAPUR_NOVEMBER:"Novembro",SAPUR_AUGUST:"Agosto"," +
"SAPUR_JANUARY:"Janeiro",SAPUR_BUTTON:"Botão",SAPUR_FIELD_PW:"Senha",SAPUR_FIELD:"Texto editável"," +
"SAPUR_DISABLED:"Não disponível",SAPUR_FIELD_DATE:"Data",SAPUR_MARCH:"Março",SAPUR_FIELD_NUMBER:"N°"," +
"SAPUR_MSG_STOP:"Stop",SAPUR_BUTTON_WHL4:"{0} - {1} - {2} - {3}"," +
"SAPUR_BUTTON_ENABLED:"Para ativar, utilizar a barra de espaço",SAPUR_TUESDAY_ABBREV:"3ª",SAPUR_READOLNY:""," +
"SAPUR_MSG_JUMPKEY:"Pressionar a barra de espaço para navegar para o campo correspondente",SAPUR_JUNE:"Junho"," +
"SAPUR_MONDAY_ABBREV:"2ª"});</script>");
if (showPopUp(inf)) {
String dateFormat = HxLocaleUtil.getSapDatePatternNumber(pc.getLocale());
pc.write("</td><td align='left'><div class="urEdfHlpSml" onClick="");
pc.write("htmlxPopUp('");
pc.write(getPopUpUrl(pc, inf.getPopUpPage()));
pc.write("', '");
pc.write(uniqueName);
pc.write("', '");
pc.write(popUpKeyUniqueName);
pc.write("', ");
pc.write(inf.getPopUpWidth());
pc.write(", ");
pc.write(inf.getPopUpHeight());
pc.write(", '");
pc.write(inf.getPopUpAttributes());
pc.write("')">");
pc.write(" </div>");
if (showPatternHint(inf)) {
String pattern = "";
String patternTooltip = "";
if (DataType.DATE.equals(inf.getType())) {
pattern = HxLocaleUtil.getDatePatternInLocaleLanguage(pc.getLocale());
patternTooltip = HxLocaleUtil.formatHxMsg(pc.getLocale(), "HxInputField.DatePatternTooltip", pattern);
else if (DataType.TIME.equals(inf.getType())) {
pattern = HxLocaleUtil.getTimePatternInLocaleLanguage(pc.getLocale());
patternTooltip = HxLocaleUtil.formatHxMsg(pc.getLocale(), "HxInputField.TimePatternTooltip", pattern);
pattern = " " + pattern;
else if ((inf.getPatternHint() != null) && (inf.getPatternHint().length() > 0)) {
pattern = " " + inf.getPatternHint();
patternTooltip = HxLocaleUtil.formatHxMsg(pc.getLocale(), "HxInputField.PatternTooltip", pattern);
pc.write("</td><td align='left'>");
pc.write("<span class='sapTxtLeg' title='" + patternTooltip + "'><nobr>");
pc.write("<font color='666666' face='Microsoft Sans Serif' style='vertical-align:super' size='1'><b>" + pattern + "</b></font>");
pc.write("</nobr></span>");
if (showStatusMsg(inf)) {
if (inf.getStatusMsgPosition().equalsIgnoreCase("RIGHT")) {
pc.write("</td><td align='left'>");
pc.write("<font color='990000' face='Microsoft Sans Serif' size='1'>");
else if (inf.getStatusMsgPosition().equalsIgnoreCase("BELOW")) {
pc.write("</td></tr><tr>");
if (showDateHelp(inf) && showPatternHint(inf)) {
pc.write("<td align='left' colspan='3'>");
else if (showDateHelp(inf) ^ showPatternHint(inf)) { // '^' is Exclusive OR (XOR)
pc.write("<td align='left' colspan='2'>");
else {
pc.write("<td align='left'>");
pc.write("<font color='990000' face='Microsoft Sans Serif' style='verticle-align:super' size='1'>");
pc.write("<nobr>" + inf.getStatusMsg() + "</nobr>");
pc.write("</font>");
if (showDateHelp(inf) || showPopUp(inf) || showPatternHint(inf) || showStatusMsg(inf)) {
pc.write("</span></td></tr></table>");
// Generate code to store the current Locale in the HTML form,
// and make the month and day names available in javascript arrays.
// The form's Language attribute is used as a flag so that this is only
// done once for each form.
Form form = pc.getCurrentForm();
if ((form.getLanguage() == null)
|| (!form.getLanguage().equals(pc.getLocale().toString()))) {
// Save the locale in the html form as hidden fields so that the
// same locale can be used to parse returned data.
pc.write("<input type="hidden" name="_HTMLX_LANGUAGE_" value="" + pc.getLocale().getLanguage() + "">");
pc.write("<input type="hidden" name="_HTMLX_COUNTRY_" value="" + pc.getLocale().getCountry() + "">");
pc.write("<input type="hidden" name="_HTMLX_VARIANT_" value="" + pc.getLocale().getVariant() + "">");
// Write javascript arrays of month and day names in the locale language
StringBuffer sb = new StringBuffer(250);
String javaScriptPath = pc.getJavascriptPath();
sb.append("var javaScriptPath='");
sb.append(javaScriptPath);
sb.append("';");
java.lang.String dayNames[] = RenderUtil.getDayAbbreviations(pc.getLocale());
if (dayNames.length != 7) {
throw new IllegalStateException("Only locales with 7 days are supported!");
sb.append("var htmlbDayNames = new Array('");
for (int i = 0; i < 6; i++) {
sb.append(dayNames<i>);
sb.append("','");
sb.append(dayNames[6]);
sb.append("');n");
sb.append("var htmlbMonthNames = new Array('");
java.lang.String monthNames[] = RenderUtil.getMonthNames(pc.getLocale());
for (int i = 0; i < 11; i++) {
sb.append(monthNames<i>);
sb.append("','");
sb.append(monthNames[11]);
sb.append("');n");
String jscript = sb.toString();
pc.getDocument().getIncludes().addBodyEndResource(ResourceType.DIRECTJSCRIPT, "HTMLB_INPUTFIELD_DATEHELP", jscript);
pc.getDocument().getIncludes().addBodyEndResource(ResourceType.DIRECTJSCRIPT, "HTMLX", getHtmlxJavascript());
// Set the language in the form so we don't do this again
form.setLanguage(pc.getLocale().toString());
if (writingDebugToConsole) {
System.out.println("Finished rendering mimic HxInputField (id='" + inf.getId() + "')");
private static boolean showDateHelp(HxInputField inf) {
if (DataType.DATE.equals(inf.getType())
&& inf.isShowHelp()
&& !inf.isDisabled()) {
return true;
return false;
private static boolean showPopUp(HxInputField inf) {
if (!showDateHelp(inf)
&& !inf.isDisabled()
&& inf.isShowPopUp()) {
return true;
return false;
private static boolean showPatternHint(HxInputField inf) {
boolean isDateOrTime = DataType.DATE.equals(inf.getType()) || DataType.TIME.equals(inf.getType());
boolean patternHintSet = (inf.getPatternHint() != null) && (inf.getPatternHint().length() > 0);
if (inf.isShowPatternHint()
&& (isDateOrTime || patternHintSet)) {
return true;
return false;
private static boolean showStatusMsg(HxInputField inf) {
if (inf.isShowStatusMsg()
&& (inf.getStatusMsg() != null)
&& (inf.getStatusMsg().length() > 0)) {
return true;
return false;
private static String getPopUpUrl(IPageContext pc, String pageName) {
IPortalComponentRequest request = (IPortalComponentRequest)pc.getRequest();
IPortalComponentResponse response = (IPortalComponentResponse)pc.getResponse();
IPortalUrlGenerator portalGen = null;
IUrlGeneratorService urlGen = (IUrlGeneratorService)request.getService(IUrlGeneratorService.KEY);
ISpecializedUrlGenerator specUrlGen2 = urlGen.getSpecializedUrlGenerator(IPortalUrlGenerator.KEY);
if (specUrlGen2 instanceof IPortalUrlGenerator) {
portalGen = (IPortalUrlGenerator) specUrlGen2;
// Create the url to the iView
String url = "";
if (portalGen != null) {
// Create the parameters passed to SAP transaction for mesima
url = portalGen.generatePortalComponentUrl(request, pageName); // "htmlxJarMimicExample.default");
return url;
protected static String getHtmlxJavascript() {
return "n" +
" if(window.document.domain == window.location.hostname) { n" +
" document.domain = document.domain.substring(document.domain.indexOf('.')+1); n" +
" } n" +
" var popUpTextId; n" +
" var popUpKeyId; n" +
" var myPopUp; n" +
" function setTextField(text) { n" +
" field = document.getElementById(popUpTextId); n" +
" if (field) { n" +
" field.value = text; n" +
" } n" +
" else { n" +
" alert('Text target field for pop up not found (' + popUpTextId + ')'); n" +
" } n" +
" } n" +
" function setKeyField(key) { n" +
" field = document.getElementById(popUpKeyId); n" +
" if (field) { n" +
" field.value = key; n" +
" } n" +
" } n" +
" function setFields(text, key, close) { n" +
" setTextField(text); n" +
" setKeyField(key); n" +
" if (close) { n" +
" myPopUp.close(); n" +
" } n" +
" return false; n" +
" } n" +
" function htmlxPopUp(url, textId, keyId, width, height, attributes) { n" +
" popUpTextId = textId; n" +
" popUpKeyId = keyId; n" +
" if (myPopUp) { n" +
" myPopUp.close(); n" +
" } n" +
" if (event!=null){ n" +
" xPos = event.screenX-event.offsetX; n" +
" yPos = event.screenY-event.offsetY; n" +
" } n" +
" if ((xPos+width) > screen.availWidth) { n" +
" xPos=screen.availWidth - width - 10; n" +
" } n" +
" if ((yPos+height) > screen.availHeight) { n" +
" yPos=screen.availHeight - height - 10; n" +
" } n" +
" sizeAndPos = 'width=' + width + ', height=' + height + ', top=' + yPos + ', left=' + xPos; n" +
" myPopUp = window.open(url, 'PopUp', sizeAndPos + ', ' + attributes); n" +
" if (!myPopUp) { n" +
" alert('You may have unrequested popup blocking on.'); n" +
" } n" +
" }n";
// Methods to assist dubugging JSP pages
* @return True if debug messages are being written to the console
public static boolean isWritingDebugToConsole() {
return writingDebugToConsole;
* When an error occurs in a JSP page the line number given in the stack
* trace is rarely the line that caused the error. This can make traking
* down errors in a JSP page can be very difficult. By writing debug messages
* to the console every time a field is rendered, it can be much easier to
* identify the area of code causing a problem.<p>
* <b>Do NOT set this in the production release of your application.</b>
* @param b
public static void setWritingDebugToConsole(boolean b) {
writingDebugToConsole = b;
* Initialise to NOT write debug to the console
static {
writingDebugToConsole = false;Try these
[http://help.sap.com/saphelp_nwmobile71/helpdata/en/45/65ad4ee0531aa8e10000000a114a6b/content.htm]
[http://help.sap.com/saphelp_nw04/helpdata/en/6f/1bd5c6a85b11d6b28500508b5d5211/content.htm]
[http://infocenter.sybase.com/help/index.jsp?topic=/com.sybase.infocenter.dc01381.0120/doc/html/koh1278435126915.html]
Reagards,
Mouli -
I've noticed that CDs loaded into iTunes library play back at 24/96. Can these now be burned to a DVD without 3rd party software?
iTunes does not burn DVDs, so you will have to use third-party software regardless of the format of the tracks.
Regards. -
I understand that an imovie or idvd project will take up quite a bit of space on my hard drive, so after I create the movies on either program I want to delete them. I can't figure out how to delete them on idvd. Should I go to finder? I'm so confused!
iDVD only uses pointers to the media, photos and QT files, that it uses in its projects. So if you delete a movie that you used in it that movie will be lost to iDVD.
However you can use the File ➙ Archive Project... menu option and that will copy the media into the iDVD project package. Then if you delete the movie file the archived project will still have its copy of the movie to use.
You won't be able to go back and make any changes to the movie if you do this. So wait until the project is complete and burned to disk before archiving and deleting the movie files.
Personally I would get an external HD and save those movies and other files that you might want to delete from your boot drive because you never know when you might want to go back and make changes. Once they are deleted you can't go back.
Happy Holidays -
I tried to import picture/video files from iPhone 5S to MacBook Pro Aperature. It appeared to be trying to download every picture I have ever taken even tho I checked do not import duplicates. The phone is not connected to lap top. It has been spinning for 1/2 day. I can't stop it. I can't shut down the computer. How do I stop the import and shut computer down.
Hey L. DENISE,
I recommend that you use the following article to help you address this issue:
OS X: How to quit an unresponsive application using Force Quit
http://support.apple.com/kb/ht3411
Thanks for being a part of the Apple Support Communities!
Regards,
Braden -
During migration all of my IE favorites didn't come over. How can I copy the rest of them?
Using the import bookmarks from IE it only brought over some of them. How do I get the rest to come over?
I'm using Windows 8, IE 11.If there are problems with importing the IE Favorites in Firefox then export the favorites in IE to an HTML file and import that file in the Firefox Bookmarks Manager.
If you do not have the menu bar in IE then right-click the toolbar at the top to enable the Menu Bar.
*Export the favorites in IE to an HTML file (bookmarks.html):<br>File > Import and Export
*Import the HTML file in Firefox:<br>Bookmarks > Show All Bookmarks > Import & Backup > Import Bookmarks from HTML
See "Import from another browser" and "Import from file":
*http://kb.mozillazine.org/Import_bookmarks
Maybe you are looking for
-
X1 Carbon (20AX series) wifi connectivity issues
Dear Lenovo Support and all others, I am posting this in hope that someone can help with my problem and also to share my unpleasant experience with a new Lenovo product. Lenovo Thinkpad X1 Carbon Model: 20A8A00VSG OS: Windows 7 Pro 64bit Purchase dat
-
Images on websites are discolored and misplaced
<i>Locking duplicate thread.<br>Please continue here: [[/questions/1056278]]</i> it happens on somewebsites not all
-
When you preorder the iphone5, how do you switch your existing number to that phone?
I have an ATT iphone4 now. If I preorder the iphone5 tomorrow via Apple.com, how do I switch the phonenumber from old phone to new phone once I get it in hand?
-
Hoi all, I have an interesting problem. I installed the trial version of the Premium Production Suite CS5 Everyting works fine. Just to be clear on this. I do have audio, on my computer and in premiere and it works. But now I want to configure my aud
-
Error when installing nokia pc suite version 6.86....
when i try to install nokia pc suite i get ab error message that error 1904 module c:\program files \nokia\nokia pc suite\Bkmrk.dll failed to register HRESULT - 2147024770 contact your support personnel please help