Hi I was wondering if anyone has experienced ios 7 problems on the iphone 4s as mine often blanks out and wont start up all I get is a white screen and when (if) it comes on the backgroung is not normal?
Hi I was wondering if anyone has experienced probs with the ios7 on iphone 4s, as mine keeps going white screen and wont turn on reboot unless im lucky. When, if it comes on it blurrs and fades out after a couple of minutes the screen also jitters and dies often. I dont know if this is due to the software update or a faulty screen etc... any thoughts?
Sno problems here at all.
Similar Messages
-
when i active my mac pro all i get is a white screen and it loading and when it fully load its turn off , and it keep on doing the same thing for hours
Hi Shahenaz,
It's a little difficult to understand exactly what's going on with your mac based on the description you gave. Is there anything else you could add? Is it stuck in a reboot loop? Or is it just showing a white screen forever?
I had pretty much the same problem a few days ago, and was worried my mac was screwed permanently, but I got it fixed up no problem!
Follow these steps to try and troubleshoot/fix the problem.
1. Boot into OSX Recovery Mode
First, turn off your Mac. If it isn't responding, or is stuck in a reboot loop, just hold down the power button until it turns off, and you hear the fans stop. Then boot it while holding the Command and R keys. If it successfully boots into OSX Recovery Mode, continue with this step. If not, skip to step two. (My Mac couldn't successfully boot into the recovery mode, so I had to go to step 2)
Select "Disk Utility" from the list of options, and find your built in hard drive from the list on the left. Usually there are two listings/names for your drive. The first should be something like "500GB longchainoflettersnumbers Media". Then the one below will be a little easier on the eyes, named Macintosh HD, if you haven't changed its name. That's the one you want, click it.
Now go to the "First Aid" tab. Click on the "Verify Disk" button in the bottom right corner, and let it do its thing. Once that's done, hit repair disk, also in the bottom right corner. If your disk is corrupted, you may need to run the repair process several times, before it comes up completely clean.
Once this is done, select Shut Down from the Apple menu and, once your Mac is completely off, turn it back on like normal. If it works, great. If not, proceed to step two.
2. SafeBoot
Sometimes, when a mac is acting up and doesn't want to start, all it takes is a safe boot, followed by a regular restart. Or maybe you recently installed a program that either has malicious or errored coding that's causing your troubles. This is where Safe Boot comes in.
Turn off your mac, and reboot it while holding Shift. (If you want to see the process that's going on in the background, boot while holding Shift, Command, and V. This will enter something called Verbose Mode).
If it boots successfully into Safe Mode, great. If you believe that there's a particular program that you recently downloaded that might be causing your trouble, now's the time to delete it. If not, just reboot normally and see if it works! If it doesn't, or if your Mac didn't even Safe Boot like mine, proceed to step 3.
3. Fsck!
For this step, you're going to be booting your mac into Single User Mode. I'm not going to go into details as to what this step does, but it works for some people. Here are the steps.
Turn off your mac, and reboot it while holding Command and S. The screen should go black, and you'll see some white text run across the screen, wait a few seconds, until you see the command prompt. Now type
fsck -fy
and hit the Enter key. This will run a series of system checks, which could take a few minutes. Be patient on this part. Once it's done, it will show one of two messages:
1. "The volume (your Mac) appears to be OK
or
2. "File System Was Modified"
If you got message 1, type reboot and press Return. Hopefully your computer works after this - if not, proceed to step 4.
If you got message 2, run the same command again until you get message 1. If it doesn't seem to be working, turn off your system and proceed to step 4.
If you couldn't even boot into Single User Mode in the first place (like me), go to step 4 anyways.
Step 4: Reset the NVRAM
The NVRAM is another kind of RAM that stores data like the computer volume you had set before you turned it off, or the screen brightness, resolution etc. This memory is saved, unlike with regular RAM. Resetting it isn't harmful to your system, it will just put your screen brightness, volume, etc. to defaults.
Turn off your Mac, and reboot while holding Command, Option, P, and R, and continue holding them down until you hear the computer restart again.
I can't really explain why to do this step, I just know it works for some people, and seems to be what unbricked my MacBook Pro. If none of these steps, fixed your Mac, well the situation is looking pretty grim. Try setting up a meeting with a Mac Genius at your local Apple store. However, I know that many other people with these symptoms ended up having a logic board failure. Apple can swap out your logic board for a new one, but the price is pretty hefty, somewhere around $300 I believe.
Well I wish you luck, I hope this helped you! -
****,I have done this successful in the past but on my IPad it shows I have 4 apps that need to be updated so when I hit the update tab all I get is a white screen. When I hit the purchase or other tabs it opens up. What could be the problem?
There have been numerous reports on the forum today regarding this issue. It seems to be an issue at Apple, but no information has been posted on the status site.
http://www.apple.com/support/systemstatus/ -
Hi everyone,
I find the speed and space in my macbook pro is not enough for me anymore. I was wondering if anyone has any experience with the Hitachi 750gb/7200rpm hard drive? I have a late 2008 Macbook Pro (15 inch, 2.93 ghz C2D, 4gb ram) running osx Lion and was wonder about compatibility with said drive.
Thanks,
KevinIf its this one, your good to go:
http://eshop.macsales.com/item/Hitachi/0S03339/
Ciao. -
In the two days since updating to iOS8 my iPad has restart itself randomly 5 times. I was wondering if anyone else had this problem and if there is an update coming out to fix it.
Hi DSfromMO2,
I have this happening to me too... it is frustrating enough for me to pitch my computer out the 4th floor office window. I found somewhere on these forums a solution which worked for me, but only for a short time. I'm back to having this stupid glitch. Anyway, the "temporary" solution seems to be to boot into Safe Mode by holding the Shift button down when you hear the startup chime, then let go when you see the Apple logo on the screen. You'll see you've done it right because it'll say Safe Mode somewhere on screen (upper right hand corner?). Restart again normally and your Mail should be free from these weird demons, but they'll be back. -
my final cut keeps on closing down after about 10 - 15 minutes of editing and deletes my progress it has done this about 6 times now and was wondering if anyone had had this problem and overcame it?
What version of FCP X are you using?
What is the full spec of your Mac?
What codec (file format) of video are you working with.
Andy -
I have sent my iPod back for servicing because it is cracked, with some dispute with Apple I have managed to get a brand new iPod Touch. Just wondering if anyone has had this problem how long did it take from "Replacement Product Pending" to get back to the UK
Not really. Is say "pending"
pend·ing
/ˈpendiNG/
Adjective
Awaiting decision or settlement.
Preposition
Until (something) happens or takes place: "they were released on bail pending an appeal".
Synonyms
adjective.
pendent - undecided - unsettled - outstanding - pendant
preposition.
during - until - till - to -
I can't log on to my I mac Desk top, every time I switch it on all I get is a white screen with the apple log , can anyone help pls?
Hello,
Could be many things, we should start with this...
"Try Disk Utility
1. Insert the Mac OS X Install disc, then restart the computer while holding the C key.
2. When your computer finishes starting up from the disc, choose Disk Utility from the Installer menu at top of the screen. (In Mac OS X 10.4 or later, you must select your language first.)
*Important: Do not click Continue in the first screen of the Installer. If you do, you must restart from the disc again to access Disk Utility.*
3. Click the First Aid tab.
4. Select your Mac OS X volume.
5. Click Repair Disk, (not Repair Permissions). Disk Utility checks and repairs the disk."
http://docs.info.apple.com/article.html?artnum=106214
Then try a Safe Boot, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, reboot when it completes.
(Safe boot may stay on the gray radian for a long time, let it go, it's trying to repair the Hard Drive.)
If perchance you can't find your install Disc, at least try it from the Safe Boot part onward.
If 10.7.0 or later...
Bootup holding CMD+r, or the Option/alt key to boot from the Restore partitirion & use Disk Utility from there. -
My ipod touch is not connecting to itunes and wont turn on all i get is the apple logo when i turn it on.
How do I fix this?
can anyone help?Start her:
iOS: Not responding or does not turn on -
Just updated to lion and my cctv access has stopped functioning all I get is a white screen in the middle of the control panel where the camera shots should be. I think it is caused by JAVA but am confused as when i view on snow leopard it works can you help
Open "Java Preferences" either from spotlight or your utilities folder...it's probably going to say you need to install a java runtime. Then just click install!
-
I can't get my phone to ring. When a call comes in the phone vibrates. I have checked my settings
I can't get my phone to ring. When a call comes in the phone vibrates. I have checked my [email protected]
There should be a little switch on the top left side of your phone. It's the silent mode. If it's switched on, you will see an orange bar there. Switch it off, and you'll get your sound back.
-
My 1st generation Ipod touch won't turn on at all and whenever I press the buttons to reset it all I get is a white screen, or a white screen with black lines across.Help pleaseeeeee!
You can work through the five 5 R's of troubleshooting to rule out the possibility of corrupted software.
http://www.apple.com/support/ipod/five_rs/
It might also be a good idea to let the iPod's battery fully drain. Then charge it back up and restore it once more in iTunes.
Otherwise, it's likely a hardware issue with the iPod's LCD display, meaning you'll need to take or send your iPod in for service either via Apple or a third party repair service. Here is Apple's repair pricing.
http://www.apple.com/support/ipod/service/prices/
Note that they don't actually repair the device, but exchange it for one of the same generation, model, and capacity. A third party service will actually replace the damaged part for a little less. Google "iPod screen repair" and you should get a number of results to work with.
B-rock -
After "restoring" my MacBook Pro via time capsule, all I get is a white screen with the apple in the middle and the little spin wheel spinning and spinning and spinning for 24 hrs now...
Hello kdcha55,
Thanks for using Apple Support Communities.
To troubleshoot this issue where your Mac is stuck on the gray screen with a spinning gear, please follow the steps in the support article linked to below.
Mac OS X: Gray screen appears during startup
http://support.apple.com/kb/TS2570
Take care,
Alex H. -
After refusing an update now all I get is a white screen with the firefox logo. If I have to reinstall firefox 3.66, how can I transfer my firefox profile with bookmarks etc, to the new installation?
== This happened ==
Every time Firefox opened-> press '''F11''' to bring the computer out of FullScreen
-> Tap '''ALT''' key or press '''F10''' to show the Menu Bar
-> go to View Menu -> '''Zoom''' -> click '''Reset''' -> '''Page Style''' -> select '''Basic Page Style'''
-> go to View Menu -> Toolbars -> select '''Menu Bar''' and '''Navigation ToolBar''' -> unselect All Unwanted/Incompatible Toolbars
-> go to Tools Menu -> Options -> General -> '''When Firefox starts : select "Show My Home Page"''' -> Type the address of the website which you want to be your HomePage e.g. http://www.google.com
-> go to Tools Menu -> Options -> Content -> place Checkmarks on:
1) Block Pop-up windows 2) Load images automatically 3) Enable JavaScript
-> go to Tools Menu -> Options -> Privacy -> History section -> '''Firefox will: select "Remember History"'''
-> go to Tools Menu -> Options -> Security -> place Checkmarks on:
1) Warn me when sites try to install add-ons 2) Block reported attack sites 3) Block reported web forgeries 4) Remember Passwords for sites
-> Click OK on Options window
-> go to Tools Menu -> Add-ons -> Extensions section -> REMOVE All Unwanted/Suspicious/Incompatible Extensions (Add-ons)
-> go to Tools Menu -> Add-ons -> Appearance section -> REMOVE All Unwanted/Suspicious/Incompatible Themes (Persona)
Now Restart Firefox. Check and tell if its working. -
I need to know how to fix my iphone4 I was playing one of my games and a up date poped up I pushed on the up date when it restarted all I have is a white screen with four black dots and all the driffent laughes and a i with a blue circle around it I can not make any calls or get any calls or any thing
I don't have apps on my phone so i can;t do anything
Maybe you are looking for
-
How do you remove sort info from your itunes library?
itunes keeps adding sort information back to my library when I sync my ipod classic and my ipod touch. I want to delete all sort info from my library ( over 17,000 songs, of which over 3,000 purchased on itunes ) please help.
-
Network Utilization script throws error after re-executing
Hi everyone, I have a piece of code that finds the network util of a fileserver and if it is over 75% it stops executing the script. The script works the first time but after re-executing it, it throws an error. I've tried to null out all the variabl
-
Hi, We use Oracle iLearning 5.0 Does anyone know how to create a reandom selection from a testbank when creating a new test? We have a testbank consisting od 50 questions, and want the test to select 20 random questions each time a user starts the te
-
DCN Case Study 3: ONS 15454 Linear Topology with DCN Connections at Both Ends Using OSPF
Hi, I need advise regarding design of Network Connectivity - DCN Case Study 3: ONS 15454 Linear Topology with DCN Connections at Both Ends Using OSPF. Am I need area 100 and 200 on Router 1 and Router 2 or I can don't do that? Am
-
Playing 2 Video Tracks simultaneously in FCP?
Hello everybody. Have been asking around for the last couple of days but no-one seemed to be able to help me out. My question: Is there a way of playing 2 video tracks from the timeline simultaneously and viewing what is happening in each of the 2 tr