Hi, In a IDOC --- XI(BPM)--- SOAP Sync Scenario failrure.

Hi, In an IDOC ->XI(BPM)->SOAP Sync Scenario I observed recently messages are failing in SXMB_MONI with an error as:
com.sap.aii.af.ra.ms.api.DeliveryException: SOAP: response message contains an error XIAdapter/PARSING/ADAPTER.SOAP_EXCEPTION - soap fault: System.Web.Services.Protocols.SoapException: Server did not recognize the value of HTTP Header SOAPAction: http://172.16.209.162/esdryrun/ContractData_Push. at System.Web.Services.Protocols.Soap11ServerProtocolHelper.RouteRequest() at System.Web.Services.Protocols.SoapServerProtocol.Initialize() at System.Web.Services.Protocols.ServerProtocol.SetContext(Type type, HttpContext context, HttpRequest request, HttpResponse response) at System.Web.Services.Protocols.ServerProtocolFactory.Create(Type type, HttpContext context, HttpRequest request, HttpResponse response, Boolean& abortProcessing)
friends, could u plz help on this.
Thanks,
satya.

Hello,
This indicates a configuration issue with this SOAP receiver adapter. Please check the on line help for the configuration of the SOAP adapter (the link is below). Please set the indicator in the "SOAP Action" field.
Configuring the Receiver SOAP Adapter
http://help.sap.com/saphelp_nw70/helpdata/EN/29/5bd93f130f9215e10000000a155106/frameset.htm
(Below is the extract from the link)
SOAP Action
Specify the SOAP action. The action specifies the value for the
SOAPAction in Web service messages; set the indicator.
Regards,
Sarah

Similar Messages

IDOC to BPM-SOAP adapter is sending Empty envelop

Hello,
I have a scenario where im using BPM Async/sync bridge to realize the IDOC to SOAP adapter scenario.
The web services will take the request and send the response in string (CDATA). Everything is working fine upto the synchronous interface mapping. After the data gets converted, It calls the SOAP adapter.It is here that im facing the issue. The soap adapter is sending an empty envelop without any data. But in monitoring i can see the data that it is supposed to send.
Please, can anybody help me????
Thanks,
Lakshmi

If I understand correctlty, you are doing a asynt to sync to asyn scenario. In this case you dont need an async-sync bridge.
Your BPM should have only a receive step, sync send and then an asyn send step. You might have one transformation wherever applicable. If you have opened any bridges in BPM, please remove them and try.
VJ

Need help with File to SOAP sync scenario: NO_BACK_SYSTEM_IN_HOPLIST

Hello,
I am setting up a new scenario where I get an XML file with PI, send that content via sync SOAP receiver call and direct the result of the web service response to SAP (just back to file as intermediate step).
So far I have the transaction working to the SOAP adapter receiver request / response. I see the correct approval response coming in my SOAP channel (RWB AE payload), but this message gets stuck there before routing back to my receiver interface and mappings.
General setup:
FILE Sender to SYNC OB SI.
OB SI Request is my source message type and Response is my final message output type.
OM Source is this Sync OB SI. Target is a SOAP Sync IB SI. Request Mapping program matches the source file message type and target SOAP layout. Response Mapping matches SOAP response and Target is my final file layout.
Routing for Sync OB SI ID uses this OM for Sync IB SI.
SYNC IB SI has Request and REsponse messages mapping the external SOAP call.
When I test the configuration I get success.
When I send messages through I get error in the adapter about this NO_BACK_SYSTEM_IN_HOPLIST (therefore the response message is not making it back into the IE so that it can be mapped again and forwarded).
Complete error message from RWB Adapter Log "Transmitting the message to endpoint http://[myhostname]:[myport]/sap/xi/engine?type=entry using connection SOAP_http://sap.com/xi/XI/System failed, due to: com.sap.engine.interfaces.messaging.api.exception.MessagingException: NO_BACK_SYSTEM_IN_HOPLIST:." and the next line is "Received XI System Error. ErrorCode: NO_BACK_SYSTEM_IN_HOPLIST ErrorText: null ErrorStack: Legacy system to which acknowledgment message is to be sent is missing in hoplist (with wasread=false)"
Any ideas for me? (fyi not using BPM).
Regards, Aaron Myers

Hi AAron,
Looks like this problem has occured before. There are SAP Notes recommended. Below are some helpful links.
http://scn.sap.com/thread/848913
http://scn.sap.com/message/4659941#4659941
Thanks,
Divya.

SOAP FTP SOAP Sync Scenario

Hi,
I am working on scenario where PI receiver XML message through SOAP Adapter and then transform into tab separated text and send it to FTP location, now requirement is to send back synchronours respose back same XML message with adding one more tag as Status In Process.
I am fine till sending text File to FTP location but how to send Sync XML response back with additional Status tag.
There r few solution use BPM Sync Async bridge, can we do it without using BPM. Even if i am using BPM, even after sending File i need Send Sync step to send back message to close Sync Asyn Bridge in BPM it means i need Sender Agreement with Sender communication channel to send corresponding response message to BPM. is their any alternate way to the same.
With Regards
Sunil

now requirement is to send back synchronours respose back same XML message with adding
one more tag as Status In Process.
not sure if you can add a tag to a already defined structure.....
What you can do in this case is
1) If you are using a wsdl of some other application then ask them to modify the response message to accomodate the Status tag ( if it is not present already).....then you can populate this in a mapping..
Can you tell me when the Status in Progress should be populated?
Is there any response coming from FTP which you will use as an indicator to say Status in progress?
OR is it when you send the FIle you need to correspondingly popluate Status in Progress tag and send to SOAP sender (irrespective of what happens in the FTP end)?
Regards,
Abhishek.

IDOC to Webservice (Async/Sync scenario)

Hi Experts,
Can you please help me out need to design an SEnario
IDOc to webservices useing SOAP. to External WEbservice,
I need some step to design.and Need to validate VEndor Number in that. in External webservice.
Reg's
Raj

hi raj,
u can use asynch/synch bridge in bpm for synch idoc-xi-soap.
for bpm refer:
/people/arpit.seth/blog/2005/06/27/rfc-scenario-using-bpm--starter-kit
for soap adapter refer;https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/d23cbe11-0d01-0010-5287-873a22024f79
for idoc refer:
/people/prateek.shah/blog/2005/06/08/introduction-to-idoc-xi-file-scenario-and-complete-walk-through-for-starters - IDoc to File
/people/swaroopa.vishwanath/blog/2007/01/22/ale-configuration-for-pushing-idocs-from-sap-to-xi - ALE settings for R3-XI
u can refer all these links and complete ur scenario.
[reward if helpful]
regards,
latika.

RFC(WSDL) to SOAP sync scenario

Dear all,
My requirement is there is an RFC from ABAP that has to be exposed as WSDL and send it to some 3rd part sys take response and send it to RFC(abap).
How can this be achieved in 7.1/7.3,is there any difference .
I did not on work much on Soap scenario's.
Pls suggest.
Thanks

Since RFC is exposed as WSDL you can import that WSDL int the ESR to include request and response messages. Also create outbound(RFC) interface with the request and response message types. Similary you need to get WSDL for the receiver system. Import the WSDL IN ESR to create request and response message. Create inbound interface (receiver) using the receiver wsdl req,resp messages. since RFC Is exposed as WSDL, I think you can create soap sender for RFC and soap receiver for the target system synchronous. You can refer SDN for SOAP sender and receiver scenarios.
Refer SDN and also refer this [link|http://www.riyaz.net/sap/xipi-a-guide-to-using-sap-xi-soap-adapter/113/]

Error with Proxy - Soap sync scenario - "invalid http response:HTTP/1.1 5"

Hello,
I'm working on a PI scenario as displayed below:
Proxy <-> ECC <-> Soap
I've already imported the WSDL provided by 3th party and mapped one of the actions of the interface.
In the PI configuration I`d created the Scenario, using a Soap Receiver communication channel, passing only the URL and the action (no more options used).
When I`m trying testing using SPROXY or Runtime Workbench, the error bellow is displayed, and no receive message is created:
"com.sap.engine.interfaces.messaging.api.exception.MessagingException: java.io.IOException: invalid http response: HTTP/1.1 5"
Someone knows the error cause?
Thanks,
Ana Paula Lavieri

Hello,
"com.sap.engine.interfaces.messaging.api.exception.MessagingException: java.io.IOException: invalid http response: HTTP/1.1 5"
HTTP 1.1 is not natively supported by standard SOAP or Plain HTTP Adapter, you should use SOAP Axis for that. See SAP Note 1039369 - FAQ XI Axis Adapter, under Receiver Adapter General -> 16. Can I use HTTP 1.1? Otherwise, you would have to ask the third-party to use HTTP 1.0 instead.
Hope this helps,
Mark

Idoc to soap sync without bpm. is it possible? Helping me..

Hi Experts,
i have a small clarification Idoc to soap sync interface in sap pi 7.0. i created IDoc to Soap sync using BPM but some times the signals are stuck due to load issue in swpr, while reprocess those signals all going successfully to the receiver. So We are trying to eliminate BPM.
I just wanted to know Idoc to Soap sync scenario without BPM is possible or not in SAP PI 7.0?
if it is possible kindly send me the links
Regards,
Kiran polani

Hi Kiran,
Could you please let us know the exact requirement. How do you want to send the response back to IDOC?
ASync - Sync Bridge with IDOC sender is not possible in PI 7.0.
If It is something like IDOC --> SOAP --> IDOC , And If the SOAP request is small then you can use SOAP Lookup in IDOC to IDOC Scenario.
In The mapping You can do a lookup and get the response from SOAP(Webservice) and map that to your Target IDOC.
This is one possible way for you without BPM in PI7.0.
Please let me know if you need more details about this.
Thanks
Jyothi A

Large soap sync messages

Hi people,
I have a B2B scenario in which I send to the internet packets from 3 to 10MB using the soap adapter. The scenario is RFC (async) -> XI - BPM -> SOAP (sync).
The soap adapter sends these messages at a max rate of 30 kB/s. Creating a java or .Net proxy with the same wsdl I can reach 5 times this rate (150 kB/s).
What can I do to speed up this process in XI?
More info:
1) We are bypassing the firewall;
2) I don't have link problems;
3) I don't use SSL;
4) I have a standard XI 3.0 server under SP18;
5) I cannot change the processing mode to asynchronous.
PS: Points will be rewarded to helpful answers.

Hi Ravi,
Do you mean activating the parameter "Do not use SOAP Envelope"?
If yes, this cause the following error:
ADAPTER.HTTP_EXCEPTION
HTTP 500 Internal Server Error.
or
- <soap:Envelope xmlns:soap="http://schemas.xmlsoap.org/soap/envelope/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:xsd="http://www.w3.org/2001/XMLSchema">
- <soap:Body>
- <soap:Fault>
<faultcode>soap:Client</faultcode>
<faultstring>Server found request content type to be 'application/xml', but expected 'text/xml'.</faultstring>
<detail />
</soap:Fault>
</soap:Body>
</soap:Envelope>

RFC to SOAP sync error

Hi All,
I am doing the RFC to SOAP sync scenario. request R3 data is coming to XI and its triggering to SOAP receiver.
Information SOAP: continuing to response message e9598290-a14f-11df-969a-00145e474044
Error SOAP: response message contains an error Application/UNKNOWN/APPLICATION_ERROR - application fault
i have tried to test the File to SOAP sync scenario to test the SOAP and its working fine. from file request to soap request and soap response to file response.
the same way i have done the RFC request to soap request and soap response to rfc response.
in sxmi_moni i can see the request from RFC but i did't find the request mapping to SOAP.
I have tested the test mapping and its working fine.
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- 
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="1">
<SAP:Category>Application</SAP:Category>
<SAP:Code area="UNKNOWN">APPLICATION_ERROR</SAP:Code>
<SAP:P1 />
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText>application fault</SAP:AdditionalText>
<SAP:ApplicationFaultMessage namespace="http://www.webMethods.com/2001/10/soap/encoding">exception</SAP:ApplicationFaultMessage>
<SAP:Stack />
<SAP:Retry>M</SAP:Retry>
</SAP:Error>
the r3 request stacture is:
<filed1>
<filed2>
<filed3>
<ITEM>
<ITEM1>
<ITEM22>
</ITEM>
the soap request stacture is:
<filed1>
<filed2>
   <Header>
    <filed1>
    <filed2>
    <filed3>
   </header>
   <Item>
    <item1
    <item2>
    <item3>
   </Item>
</field2>
</field1>
is there any issue with mapping?
RFC sender CC error is Error in processing caused by: com.sap.aii.adapter.rfc.core.server.RfcServerException: got unexpected document type:DOC_TYPE_UNKNOWN
Can you pls let me know the some inputs to reslove this issue
Thanks,
Venkat

have tried to test the File to SOAP sync scenario to test the SOAP and its working fine. from file request to soap request
and soap response to file response. the same way i have done the RFC request to soap request and soap response to rfc
response.
FILE to SOAP Sync scenario....did you use RequestResponseBean and are you using the same to process RFC to SOAP Sync scenario? If yes, then you dont need the RequestResponseBean for RFC <--> SOAP.
in sxmi_moni i can see the request from RFC but i did't find the request mapping to SOAP. I have tested the test mapping
and its working fine. - - Application APPLICATION_ERROR application fault exception M the r3 request stacture is: the soap
request stacture is: is there any issue with mapping?
I hope you have included a mapping program for Request Mapping and also for Response Mapping in the Interface/ Operation Mapping and included the same in Interface Determination!
Regards,
Abhishek.

File BPM Webservice IDOC .........Error in BPM workflow(Sync send step)

Hi all,
I have the same type scenario that is file initiates the bpm that invokes the Webservice.the file data goes into bpm as the input data of the webservice and webservice gives the response and then the web-service response is mapped to
idoc and finally posted to R/3.
The interface sI created:
1.outbound Async -
>for file
2. Abstract async----
>bpm reciever step.
3.Abstract sync----
>bpm sync send step.
4.inbound sync -
>for the webservice to recieve the reqst and to send the response to Abstract sync
5.Abstract async----
>to send the data out of BPM
6.inbound async----
for idoc
created 3 communication channel.
1.file adapter: sender
2.SOAP adapter: Recv
3.IDOC adapter: Recv
created 3 reciever determination
Business process instance in ID
reciever agreement(2)
interface determaination
But getting a problem in BPM.
I think the scenario is logically correct as I have seen previous
SDN suggestions.
But getting the problem in BPM's sync step.and the SOAP rec channel is also inactive.in BPM workflow I can see the recv step is getting file req data but after that in the sync send step
its stuck up.getting error.
Please sir suggest me.

Remove the interface you created for Idoc that is inbound async one. use the imported Idoc itself as the interface and also as the message type. Everything else looks good though i did not really evaluate ur ID configuration..
VJ

Idoc (async) - soap (sync) - file (async)

Hi.
I have a flow from idoc (async) to webservice (soap sync) and I want the response from soap to be written in file (async).
I want to do this without BPM and I have read some posts about using modules RequestResponseBean and ResponseOnewayBean.
Can someone help me with this step by step.
I have in ESR a OM that is async because of the outbound Idoc. Do I need a sync OM for the soap call and another async OM for the response to the file.
Where do I need to put the modules? In the SOAP receiver?
I know there are some threads that cover some of this but I couldn't find any that cover the whole of my issue step by step.
Regards,
Hjortur

Yes doing async to sync is possible without bpm. YOu already got the design solution.
>Where do I need to put the modules? In the SOAP receiver?
Sender Channel. In your case you might not need channel for idoc but for this configuration you might need to create one. That is my guess.
In the module section sequence as follows
1) AF_Modules/RequestResponseBean   Type: Local Enterprise Bean    Module key   1
2) CallSapAdapter                Type Local Enterprise Bean    Module Key 2
3) AF_Modules/ResponseOnewayBean     Type Local Enterprise Bean Module Key   3
Plus follow the link given by shabarish as reference.

Proxy to SOAP Sync with BPM (1:N)

Hi
Proxy to SOAP Sync and return message will be posted back to R/3 via proxy. This is Async to Sync using BPM. And the split happens in BPM as well. We are suppose to go with BPM here, that's the mandatory step for learning purpose
I am trying to follow the steps below
1. OB Async MI Proxy outbound message into XI
2. ABS Async MI to receive the proxy message into BPM
3. ABS Sync MI SOAP Sync message
4.ABS Async MI for Proxy Inbound to R/3
5. BPM for Split
I am at the stage of writing spec, can't execute any of the steps and have no prior experience with this kind ofscenario. If anybody have experience, please do share exact steps. Thanks in advance

Hi,
Your steps are correct ... in the IP, the following steps will be there -
Rcv -> Transform -> Send (sync) -> Transform -> Send (async).
I am not too sure what you mean by step 5 - BPM for split ?
Regards,
Neetesh

IDoc to soap synchronous scenario with BPM

Hi,
I am working on IDoc to soap synchronous scenario using BPM. Here i am facing lot of soap exceptions in my production system. I handled the exceptions. The data getting excuted for the first time, the same data(just changed the description)is giving exceptions for the second time. Please let me know why the exceptions are getting, and different type of exceptions and solutions for the same.(Blog also is fine)
Thanks & Regards,
Pragathi.

The data getting excuted for the first time, the same data(just changed the description)is giving exceptions for the second
time.
Ideally you should not get an exception for the same data....can you tell is the description and where are you getting the exception...is it a part of the SOAP message or some object?
An exception might have occured because the description would be something unacceptable by the target application.
and different type of exceptions and solutions for the same
there would be many blogs....your thread would be spammed...better make a search on SDN with exception text that you are getting.
Regards,
Abhishek.

BPM HTTP Sync - IDOC Async Timeout

Hi!!!
my scenary is using a BPM
         HTTP sync <--> BPM -> IDOC
my IP
receiver            sender1             transforme              sender2
SI_ABS_SYNC         SI_ABS_REQ          OM_ABS_REQ_to_ABS_RES   SI_ABS_RES
SI_ABS_REQ                              SI_ABS_REQ              Close S/A Bridge
Open S/A Bridge                         SI_ABS_RES
                                        Create New Transaction
HTTP                IDOC                Mapping                 HTTP_Response
->                  ->                  ->                      <-
->                                                              <-
the steps the BPM pass
receiver -ok
sender1 -ok
tranformer -ok
sernder2 - mistake
could you help me, what i need to move or configurate to return the response message
the tranformer is a Mapping with return a ID that it is in the request message, i simple sent to return
Levy Gonzalez

Hi Levy,
this forum is about SAP NW BPM, not PI ccBPM. Please post your question in the PI forums, I´m sure there are people that can help you.
Best regards,
Matthias

Hi, In a IDOC --- XI(BPM)--- SOAP Sync Scenario failrure.

Similar Messages

Maybe you are looking for