Hi my name is Vajra from INDIA, i am using ipod shuffle 3rd generation but it is not working properly due to battery problem, i need to change the battery please guide me how to change the battery or any chance to replace the ipod shuffle 3rd generation ?

Seems no one care about us .no one replied till no@!!!!@ strange

Similar Messages

I want to installed iOS 8 in iphone6.because ios 8.2.1 not working properly. I realized it in slow than old verson.so please guide me how to install old verson

I Need to download ios8 old verson because not working properly.so please guide how to download

DDowngrading isn't supported by Apple.
try setting -general-reset-reset network settings

I am using firefox 3.6.17 i upgraded it to 4.1.but it does not work properly sometimes it opens every website and most of the time it does not work . so what is the problem please help . thank you

i am using firefox 3.6.17 i upgraded it to 4.1.but it does not work properly sometimes it opens every website and most of the time it does not work . so what is the problem please help . thank you

Did you check your security software (firewall)?
A possible cause is security software (firewall) that blocks or restricts Firefox or the plugin-container process without informing you, possibly after detecting changes (update) to the Firefox program.
Remove all rules for Firefox from the permissions list in the firewall and let your firewall ask again for permission to get full unrestricted access to internet for Firefox and the plugin-container process.
See:
* [[Server not found]]
* [[Firewalls]]

How can I get multiple users to be able to share the music on iTunes? I've tried Home Sharing, but it does not work properly.

How can I get home sharing to work on my mac mini for multiple users? It says it is working, but it never shows up in the left hand column.

Gino Cerullo,
Thanks for your response. I tried all that myself. In fact, last night, it all worked fine on all users. This morning, no Home Sharing would show up. It is really weird because some setting must have changed, but I did not knowingly changed anything, and now all the obvious fixes don't work. In fact, if I turn off Home Sharing and turn it back on, then it comes up only until I hit the "done" button on the set up page and then it goes away from the left hand column again. The ADVANCED drop down tab says it is on, but it is not there.
Thanks anyway.
Edzell

HT201415 I was randomly disconnected from my WIFI and i went to the troubleshooting page, but that did not work and it won't let me chat with apple support. Please help.

I was recently disconnected from my WIFI and it wont even budge to turn it back on. I tried the troubleshooting and that did not work. Apple won't connect me to tech support and i could really use help. Please.

Select None for payment method > iTunes Store: Changing account information
If None is not available > Why can’t I select None when I edit my payment information?
Yes, you can redeem an iTunes gift card for current purchases.
How to Redeem iTunes Gift Cards and content codes
And you can check the balance of a redeemed card > Account Home - Apple Store

Hello, how much did you pay when some parts of the keyboard keys are not working properly due to accidental spilt of tea?

I accidentally spilt a tea on the keyboard of my Macbook Air 11'. I managed to wipe the keyboard and saved my laptop. However, I noticed that the Spacebar, Shift and Command keys are not working as it should be. It's like something's stuck inside that makes these keys hard to press as usual. I refered this problem to Amsys, Berwick St London, as the reservations in Apple Stores are full. Do you have any idea how much is the cost for diagnosis and repair if ever?
Please help.

if you spilled a good bit of tea, its a serious problem, yes.
it got inside, and will corode, and bad things will begin to happen.
Liquid spills, why your MacBook chassis is a one-way valve for spills
After a substantial spill many people will turn their notebook upside down and shake it, not only does this not work, but it spreads liquid havoc throughout your machine and makes things often as bad as possible.
The keyboard itself acts like a one way valve in the case of a substantial liquid spill. While liquid pours into the bottom chassis easy, it does not come out easily at all, and in the case of any spill, most of it will not come out by turning it upside down. Disconnect all power and contact Apple for diagnostics and repair.
Do not attempt to, after a spill, ‘dry out your MacBook’ and test it
After a spill most people invariably try to “dry out” their notebook by various methods, including hair dryers and otherwise. This both does not work, and after a substantial spill of any magnitude, even if the liquid was water, residue is left behind.
There are additionally many very tight places inside your notebook where liquids will linger for a very long time, and cause corrosion or worse.
Immediately unplug your notebook and contact Apple for in shop diagnostics and parts replacement.
In the case of very minor spills people will “dry out” their notebook and feel success that their notebook is working ok, however invariably in nearly all instances after 4-14 days an error / fault pops up and is usually followed by more.
In case of a spill, damage estimates are impossible,.....anything can be fixed, without question.......the question is cost.
contact Apple for in shop diagnostics and cost estimation ....possible parts replacement.

DM - "Export from Fact Table" works but "Export" does not work properly

Hi,
I'm using BPC7M.
I found it strange that Export cannot dump data to a flat file though I'm pretty sure my selection of dimension members contain data. The existing of data was further confirmed by running Export from Fact Table successfully, where I chose the same set of dimension members. Below are the log files.
Export log file FAIL
u603Bu6B65u9AA4 2
1. Dump Data:     Failed in 32 sec.
[u9009u62E9]
FILE=\Shenergy\WJ2\DataManager\DataFiles\WJ2_SunnyTest.txt
TRANSFORMATION=\SHENERGY\WJ2\DATAMANAGER\TRANSFORMATIONFILES\SYSTEM FILES\EXPORT.XLS
MEASURENAME=PERIODIC
(u6210u5458u9009u62E9)
Category:
Time:
WED_Entity:
B_Account:
DataSrc: INPUT
[u6D88u606F]
There is no data in the selected region; select a region that has data._2_True
Export from Fact Table log file   SUCCESS
u603Bu6B65u9AA4 2
1. Dump Data:          completed in 1 sec.
2. Convert Data:       completed in 0 sec.
[u9009u62E9]
FILE=\Shenergy\WJ2\DataManager\DataFiles\\WJ2SunnyTest.txt
TRANSFORMATION=\SHENERGY\WJ2\DATAMANAGER\TRANSFORMATIONFILES\SYSTEM FILES\EXPORT.XLS
(u6210u5458u9009u62E9)
Category:
Time:
WED_Entity:
B_Account:
DataSrc: INPUT
[u6D88u606F]
Record Count: 104
Accept Count: 104
Reject Count: 0
Skip Count   :0
I tried Export in another application and it worked properly. Maybe there is something wrong with the application but I don't know how I can fix this.
Thanks!
Sunny

Hi Sorin,
In order to make sure the sum is not equal to 0, I ran the "Clear" package and full optimize the application. Afterwards, I deliberately sent only 1 record. I ran the "Export from Fact Table" and I have the following contents in my output flat file.
B_ACCOUNT,TIME,WED_ENTITY,DATASRC,CATEGORY,SIGNEDDATA
KPI0001,2009.INP,DEP_INPUT,INPUT,ACTUAL,-500.0000000
This confirms that the sum is not 0. Then, I ran "Export" package. Yet again, I encountered the same error.
There is no data in the selected region; select a region that has data._2_True
Best Regards,
Sunny

My home pages do not load as saved. When I close Firefox what ever is up in the tabs comes up again when I reopen Firefox. I know how to set it up in tools/options but it is not working properly....Bug???

This is not my first time using Firefox...It has always worked on previous versions. I have just downloaded 4.0. Is this a known bug with Firefox 4.0 ??

In case you use "Clear history when Firefox closes" or otherwise clear history:
*do not clear the Browsing History
*Tools > Options > Privacy > Firefox will: "Use custom settings for history": [X] "Clear history when Firefox closes" > Settings
*https://support.mozilla.org/kb/remove-recent-browsing-search-and-download-history
Clearing "Site Preferences" clears all exceptions for cookies, images, pop-up windows, software installation, passwords, and other website specific data.

Hello I have Problem in Apple Iphone 5 i already change it 2 time but not working properly, hello I have Problem in Apple Iphone 5 i already change it 2 time but not working properly

Dear sir,
I Purchases Iphone 5 when its launch but from first day I am facing network problem and call dropping i already change the phone 2 time but not solve the problem so I request you to give my money back so I can buy other phone if you are not give me proper reply I go through with consumer protection council.
Regards
Jitendra Hundia
+91 999 8111777

We are users. We aren't going to give you anything. You are not talking to Apple.
What carrier are you using? Aircel and Airtel are the only supported carriers in India. If you're using a different carrier, then switch to one that's supported.

I reset my ipod touch and now it says to conect to iTunes and im on my computer and the ipod is pluged up but its still not working HELP please!!!

HELP MEEE!!!

Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar

Change Password on first use does not work properly.

I have created apex application user in Oracle Apex 3.2 as follows
BEGIN
APEX_UTIL.CREATE_USER(
p_user_name => 'NEWUSER1',
p_web_password => 'secret99');
END;
As in the documentation
p_change_password_on_first_use IN VARCHAR2 DEFAULT 'Y',
User should be prompted to change password at first use. But it does not work properly. There is no such message. Still accepts user to log in with old passord that was first given to the user. I have tried explicitly to ensure change password at first log in. by
BEGIN
APEX_UTIL.CREATE_USER(
p_user_name => 'NEWUSER1',
p_web_password => 'secret99',
p_change_password_on_first_use =>'Y');
END;
Still does not work. How can I ensure user to change password on first login.
Hasan Al Mamun
Programmer
Bangladesh Bank
Dhaka, Bangladesh

Might be a long way around the problem but I would utilize a boolean flag in a column (FIRST_LOGIN) your custom auth table set to 'Y' when you create their account. Then on the login page have a page process something like:
** NOT TESTED **
declare
v_first VARCHAR2(10;
v_session NUMBER;
begin
v_session := APEX_CUSTOM_AUTH.GET_NEXT_SESSION_ID;
select FIRST_LOGIN into v_first from AUTH_TABLE where user_name = :P101_USERNAME and :P101_PASSWORD;
if v_first = 'Y' then
wwv_flow_custom_auth_std.login(
P_UNAME => :P101_USERNAME,
P_PASSWORD => :P101_PASSWORD,
P_SESSION_ID => v_session,
P_FLOW_PAGE => :APP_ID||':2' *** THIS IS YOUR PAGE TO HAVE THEM RESET THEIR PASSWORD ***
else
wwv_flow_custom_auth_std.login(
P_UNAME => :P101_USERNAME,
P_PASSWORD => :P101_PASSWORD,
P_SESSION_ID => v_session,
P_FLOW_PAGE => :APP_ID||':1' *** MAIN LOGIN PAGE *****
EXCEPTION WHEN OTHERS THEN
*** handled **
end;
The page 2 in this example would have an few items for them to enter their new password twice, a page process to update their password in the auth table and then redirect them to the intended first page.
Not sure if it meets your setup.
Ricker

Ipad2, safari does not work properly after ios6 update. How do I fix it?

I need help in fixing safari problems after ios6

With the amount of information you've provided it's impossible to offer a potential solution. We can't see your computer so we need to know the details of your problem and setup, i.e.:
what version of iPhoto are you using?
what system version are you running?
what do you mean by not working properly? Explain in detail.
what fixes have you tried?
where is your library located?
did you apply any updates or upgrades just prior to the problem occurring?
are you running a "managed" or "referenced" library?
what type of Mac?
how much free space on your boot drive?
OT

My Iphoto does not work properly, after downloading Mavericks. How can I fix it ? loading Mavericks

My Iphoto does not work properly after downloading Maverick. How can I fix it ?

With the amount of information you've provided it's impossible to offer a potential solution. We can't see your computer so we need to know the details of your problem and setup, i.e.:
what version of iPhoto are you using?
what system version are you running?
what do you mean by not working properly? Explain in detail.
what fixes have you tried?
where is your library located?
did you apply any updates or upgrades just prior to the problem occurring?
are you running a "managed" or "referenced" library?
what type of Mac?
how much free space on your boot drive?
OT

IMovie to iPhoto: I've read the discussions and other posts, but it's not working.

Ugh. I created some stills within a completed iMovie project. Now, I want to copy and export those stills to iPhoto, but it;'s not working out. Help?

You will need to download a free app called MPEG Streamclip from Squared 5 (Google it)
Now, in iMovie, select the video clip that contains the still you want. Right-click on it and select Reveal in Finder.
Drag this Finder clip into MPEG Streamclip.
Move the Playhead in MPEG Streamclip to the frame that contains the still that you want.
In MPEG Streamclip, click FILE/EXPORT FRAME.
In the dialog box, choose JPEG, PNG, or TIFF and give it a location to save to.
You can drag this file into iPhoto.

When I choose to open a new tab from a website, such as facebook, it always opens it in a new window. How do I change this to just opening a new tab. I tried changing the tab settings but it did not work

When I choose to open a new tab from a website, such as facebook, it always opens it in a new window. How do I change this to just opening a new tab. I tried changing the tab settings but it did not work. I did not have the problem until I started using firefox 4.

It is probably a JavaScript link.
You can probably force it where you want it with a keyboard shortcut
either "Ctrl+click" or "Ctrl+Shift+click". see
* Firefox and other Browser Keyboard Shortcuts (Comparison Table) http://dmcritchie.mvps.org/firefox/keyboard.htm
''Did that work?''
Some styles that provide a warning as to the type of link:
* No Follow links, mouseover id of other links - userstyles.org http://userstyles.org/styles/10987
* Change cursor on some links with JS. - userstyles.org http://userstyles.org/styles/233
* Link Warning - Themes and Skins for Mozilla - userstyles.org http://userstyles.org/styles/1301
* Link warning (cursor hover) - various filetypes - userstyles.org http://userstyles.org/styles/2538
* Red hand cursor for .pdf links - userstyles.org http://userstyles.org/styles/553

Hi my name is Vajra from INDIA, i am using ipod shuffle 3rd generation but it is not working properly due to battery problem, i need to change the battery please guide me how to change the battery or any chance to replace the ipod shuffle 3rd generation ?

Similar Messages

Maybe you are looking for