Hi, my wifi set up is Extreme, Express then iMac. All showing solid green status. Airport utility showing no connection tho? i can see network name and use homesharing too. why is it showing this?

Hi, my wifi set up is Extreme, Express then iMac over 3 floors. All showing solid green status and iMac (showing full signal wireless). However, the Airport utility is showing no connection? I can see the network name and use homesharing too. why is it showing this??

I dont follow the problem?
By the way, i hope you have those all set on non-interfering frequencies. e.g.: 1,6,11
Grant

Similar Messages

My AirPort Extreme tells me , that I have a private IP address on it's Ethernet WAN port. It is connected to a device or network that is using NAT. How do I fix this?

I'm having problems with my AirPort Extreme , it's saying that I have a private IP and that I need a DNS. Can any one help me

Configure the AirPort Extreme to operate in Bridge Mode.
Open AirPort Utility
Click on the Airport Extreme, then click Edit
Click the Network tab at the top of the window
Change the setting for Router Mode to "Off (Bridge Mode)"
Click Update to save the new settings

My IP doesn't want me to download Your program because it says it's an untrusted connection. Do I disregard their warnings and download anyway? Why are they doing this?

My IP (Roadrunner) strongly advised that I not continue the download since they said your software didn't have the proper verification and that it might be an imposter. This happened during the process of switching my email and other stuff. I'm not a computer wizard so don't know what to do now.

'''ISP''' = Internet Service Provider<br />
IP = [http://en.wikipedia.org/wiki/Internet_Protocol Internet Protocol]
As long as you're downloading Firefox from an official Mozilla website or official Mozilla download mirror, you won't have any problems.

Airport Express and iPhones can't see network-macs and ipad can?

I have an Airport Extreme base station connected to a comcast modem, with 2 express units for airtunes.
After some fiddling around due to the comcast outage, now I can't see either of the Airport Express units in the Airport Utility, AND neither my or my wife's iPhone can see the network. The iPad, iMac, Macbook and a PC can all connect no problem. My phone connects to wifi at work no problem.
Any thoughts are greatly appreciated!

Open AirPort Utility - Click Manual Setup
Click the Wireless tab below the row of icons
Your settings should look like this:
Wireless Mode = Create a wireless network
wireless Network Name = Name of your wireless network
Check mark not needed next to Allow this Network to be extended
Radio Mode = Automatic
Radio Channel = Automatic
Wireless Security = WPA2 Personal
Wireless Password = Backspace and retype your password here
Confirm Password = Backspace and retype your password
Click the Internet icon
Connect Using = Ethernet
If you have a simple modem (only one ethernet port), the setting for Connection Sharing should be set to Share a public IP address
If you have a gateway (combination modem and router with 3-4 ethernet ports), the setting for Connection Sharing should be set to Off (Bridge Mode).
Update to save changes
Restart all other devices
Any luck?

I have a D-LInk router that has lost my network name and protection. How to I re-set it up?

THe protected network name is gone and now my computer just shows me connected to "dlink"
How do I re-set it to the protected network? I tried to use a "wizard" i found on the net but it said the emulator wouldn't work and to go back to the CD. I have no idea where the CD is

I got to the page but it did not seem to give me an option to do what I want. I could see how to reset the ROUTER ADMINISTRATION password (for which right now there is none) but there as nothing about setting up my network name and password, which was lost. Or is this the same thing as the router configuration password? (I was thinking that referred to a password that would allow me to change router settings)

I changed my Airport Extreme network name and password, now I can't access my Airport Express speakers. Help please.

I changed the network name and password associated with my Airport Extreme and now my system is not recognizing my Airport Express speakers.
Can someone help me get my speakers and sound system back online?
Thanks in advance for any assistance.

You will need to think in reverse here.
Change the network name and password back to where it was on the AirPort Extreme and get things working that way.
Then, change the name and password on one AirPort Express, then the second. Both Expresses will be blinking amber at this time. Power them off.
Now, change the name and password on the AirPort Extreme.
Power up both Expresses and they will now join the AirPort Extreme network correctly since you have programmed them with the new network name and password.

When i am signing in on app store then it's showing: "this apple id has not yet been used in the iTunes store." why ?

when i am signing in on app store then it's showing: "this apple id has not yet been used in the iTunes store." why ?

Log into your account and verify that you have a valid payment metnod specified.

My iMac keeps showing this popup

my iMac keeps showing this popup: the application bblaunchagent.app quit unexpectedly

Hi, sounds like your ılackBerry software might need uninstalling & reinstalling...
https://discussions.apple.com/thread/2752009?start=0&tstart=0

Airport Utility has trouble connecting to my Airport Extreme

I have a home network with two airport extremes (a dual band airport extreme as my main router, and an older one I use to extend the wireless network). I also have a few airport express units that I use for Airtunes.
My network is working perfectly, but Airport Utility won't connect to my main Airport Extreme. If I click on the router inside of Airport Utility and try to modify any settings, it shows "Reading the Airport Extreme configuration ..." and hangs there. After a few minutes, it gives up.
It is the new dual band version, and it is directly connected to my Mac Pro via ethernet. I can use Airport Utility to connect to all my other routers without any problem (and all traffic has to route through my main airport extreme since my Mac Pro does not have wireless).
If I reboot my main router, Airport Utility is able to connect to the router for a few hours before it becomes unreachable again.
Its not a huge problem ... I just need to reboot it when I want to modify / check settings, although rebooting the router does disturb a lot of things on my network which is annoying (VPNs, network drives that need to be reconnected, etc.).
Other than Airport Utility not being able to connect to the router, the router seems to be working perfectly.
The router used to work perfectly, but it started doing this about 3 months back. As far as I can remember, there were no firmware / software updates that might have caused the problem ... it just started happening all on its own.
Ron

Hi Shadow99999
Did you ever resolve your issues with disconnection between your Mac Pro and Airport Extreme? I am having a similar issue.
I have had the extreme for about 4 months and I loose access to the internet about once a month. When I try to troubleshoot the Airport Extreme it is usually inaccessible from my Mac Pro which is my wired access point. The Airport Utility times out with a network error number that unfortunately I did not write down. The light is still green but nothing seems to be working. The first time I tried plugging and unplugging ethernet wires and accessing wirelessly through a Macbook but now I just unplug the Airport Extreme and replug (a Microsoft solution with no problem resolution.) Today I had some unusual internet traffic on my DSL modem and I wanted to look at the Airport Extreme but again I was unable to get to the Airport Extreme with the Airport Utility on my MacPro. (Everything up to the latest rev. per software update.)
The lack of access between the Airport Extreme and a wired computer is really frustrating and may drive me back to my trusty five year old Buffalo Airstation. I could at least log in when I suspected there was a problem. Loss of internet access with the Buffalo was down to maybe once every 6 months to year and lock ups to wired access even rarer.
Any other thread that you found to help you resolve your problem?
Message was edited by: Karl Seibert

HI, I recently upgraded my operating system IOS 5.0.1 on an iphone 3gs. MY question is, how do I get the text messaging preview to just pop up so that I can see the name only when the lock screen is on? The conventional ways of doing this aren't working

HI, I recently upgraded my operating system IOS 5.0.1 on an iphone 3gs. My question is, how do I get the text messaging preview to just pop up so that I can see the name only when the lock screen is on? The conventional ways of doing this, such as using turning off the SMS preview under the "passcode lock", well that option no longer exists, or if it does, I'm somehow missing it.
When I go to the "messages" setting under settings on my phone, I still don't see an option of turning it off.
If I can just get the name of the person sending the message, as I had it before, I'd be happy.
Help!

That option still exists in Settings > Notifications > Messages > Show Prview (OFF) and View in Lock Screen (ON). Here's how to configure your Notifications and Notification Center for iOS 5: http://iphone-and-i.blogspot.com/2012/01/how-to-customize-notification-center-in .html

If I have my iMac internet sharing turned on, the Airport Utility won't recognize the Airport Express I want to use to stream iTunes to my stereo. When I turn the iMac internet sharing off, the Airport Express appears but calls itself a base station.

If I have my iMac internet sharing turned on, the Airport Utility won't recognize the Airport Express I want to use to stream iTunes to my stereo. When I turn the iMac internet sharing off, the Airport Express appears but calls itself a base station. I just bought the Airport Express and it's not clear how I should set up my System Preferences for Sharing. Thx

Yes. Unfortunately the stereo is too far from the wired ethernet connection My iMac is connected to the internet using an ethernet cable from the DSL modem (plugged into the wall, not wireless). The Airport Express is plugged into an outlet 25' away from the iMac and connected to my speakers. I've turned on the iMac Airport wireless Internet Sharing, hoping to stream iTunes to the Express connected to the stereo. The iMac Airport picks up several neighborhood networks so I know it's working (and I connected my iPhone wifi to it just to check as well).
When I use Airport Utility to set up the Express, the only time Utility recognizes the Express is when the iMac Airport is off. When I turn on the iMac Airport, the Airport Utility immediately loses the Express and asks to rescan.
Maybe that explains my problem better.

HT1731 Airport Express to extend on PC version of the airport utility

I wanted to use Airport Express to extend my network from my existing Airport Extreme however I do not see the option to "extend" the network in the PC version of the airport utility, any ideas on if i can still do this?

If this airport extreme is the old space-ship/saucer type, then there will be no way to extend it, just a WDS option to use instead.
What kind of express are you using too btw?

How do I prevent other Mac users from changing my Airport Extreme Network Name and Password within the Airport Utility?

How do I prevent other Mac users from changing my Airport Extreme Network Name and Password within the Airport Utility? My company is using an Airport Extreme in our office now and I want to prevent other employees from messing with the network/settings. Is there a way to place a password on the settings to allow only the admin to access the network name and password?

Hi - you have will have to change the device passwords on all the base stations and then don't give them to anyone except the administrators and tell them not to save them on their computers that use the older versions of the Airport Utility - for the newer versions like the mobile apps, as soon as you enter the pasword it is saved and is visible in the advanced pane along with the network password - so if anyone gets a hold of your iPad or iPhone, they can edit the whole network - I have this same issue with my networks in the office and it is inconvenient but doable - I hope this helps

I can't find preferences for the notes app. and every once in awhile some of my notes just disappear at start up, I see the name and then it refreshes and they are gone, very annoying. Can anyone tell me why it does this and how to stop it? thanks

I can't find preferences for the notes app. and every once in awhile some of my notes just disappear at start up, I see the name and then it refreshes and they are gone, very annoying. Can anyone tell me why it does this and how to stop it? thanks

Hi again, I am on an iMac using OSX 10.7.5, I"ve taken screenshots to show you I think my settings are correct

I would like to change the owners name on my ipad2 to my daughters name and credit. Could someone help me figure this out?

I would like to change the owners name on my ipad2 to my daughters name and credit. Could someone help me figure this out?

Sign out from Find My Phone in iCloud, and sign out from your Apple ID in Settings/iTunes & App Store
Then setup as a new phone with iTunes and when your Daughter sets it up for the first time she can add or set up her own Apple ID.
Cheers
Pete

Hi, my wifi set up is Extreme, Express then iMac. All showing solid green status. Airport utility showing no connection tho? i can see network name and use homesharing too. why is it showing this?

Similar Messages

Maybe you are looking for