Hi Shanky , pls help out regading Profiler Trace issue ?

Hi Shanky,
Pls help out . Regadng Profiler Trace .
Thanks
Vijay

select id,path,status from sys.tarces
which is given o/p for path "NULL" value
The NULL path indicates a rowset (Profiler) trace rather than a server-side trace.  The status 1 means the trace is currently running.  You can run sp_who2 to identify the host(s) running the trace.  The Program Name will start with "SQL Server
Profiler".
Note that traces are at the server-level rather than the database level from SQL Server perspective.  Each trace may contain filters so that only events for specific databases are included.
Dan Guzman, SQL Server MVP, http://www.dbdelta.com

Similar Messages

  • Pls help out me to create a report for entry tax

    hi all,
                  pls help out me to create a report for entry tax.
                    and give some logic how i can do this.
    thanks and regards
      vikas

    SELECT < Columns>
    from pay_payroll_actions ppa,
    pay_all_payrolls_f papf,
    per_time_periods ptp
    where papf.payroll_id = ppa.payroll_id
    and ppa.effective_date between papf.effective_start_date and papf.effective_end_date
    and ppa.action_type IN ('Q','R')
    and ptp.payroll_id = papf.payroll_id
    and papf.payroll_name = :pPayrollName
    and ppa.date_earned BETWEEN ptp.start_date AND ptp.end_date
    and :pDate BETWEEN ptp.start_date AND ptp.end_date
    Pass Any Date and Payroll Name. The query should list down all payroll runs in the period in which the date falls.

  • Hi I cant able to see some web photos in my ipad showing 'unable to load' .. Some photos able to see but still almost 90% I can't ...pls help me to clear this issue ...thanks in advance

    Hi
    My ipad is not able to see some of the photos .... I can see with google images and all .. When I am loading some applications or safari images getting the same issue ..first it's showing 'loading' then its happens like 'unable to load ' pls help me to solve the issue ..thanks

    When you say that you can't find them anywhere, I assume that you mean that you can't find them on the iPad even though the storage figure says that the photos are there.
    You can try this. I don't know if this will work for you but this was recently discovered as solution for phantom photos. This was copied from a post started by gail from maine
    Delete all of your Recently Deleted photos from your Recently Deleted folder
    Then go to Settings>General>Date & Time, and change the date back to last September when iOS 8 came out, and then go back to the Recently Deleted folder. Although at the Album level it will still say "0" if you tap on the Album, you will be greeted by all of the "Recently Deleted" photos that have surpassed the 30 day limit. Mine went back to when I installed iOS 8.
    She found this in a post where txforever  was the person that discovered how to do this.
    More photos in settings than photos app shows

  • Hi, i installed ios 5 for my iphone 4 and the camera function on lock screen was on the first few days , now it doesn't show the lock screen . is there any change i can do . Pls help me to solve the issue.

    hi, i installed ios 5 for my iphone 4 and the camera function on lock screen was on the first few days , now it doesn't show the lock screen . is there any change i can do . Pls help me to solve the issue.

    nishaadp wrote:
    ... it stucks with the apple logo ,  nothing works. Is anything i can do?
    See Here for
    Frozen or unresponsive iPhone

  • Videos becoming pixelated on win8.1 while does not happen with crome pepper base flash. pls help me to resolve this issue

    videos becoming pixelated on win8.1 while does not happen with crome pepper base flash. pls help me to resolve this issue

    videos becoming pixelated on win8.1 while does not happen with crome pepper base flash. pls help me to resolve this issue

  • Halo, i hav an ipad2 version 4.3.5. now i went for updating it and while updating it shows error 4005. Pls help me in fixing this issue

    halo, iam using an ipad 2 and it was in version 4.3.5. Thought of updating it and went for it. While updating it shows error 4005 and i couldnt fix it. Can some one help me to fix this issue.

    You've tried the other things on those pages e.g. tried a different USB port on your computer and a different cable, tried the other pages that the first link
    If there’s an issue with the USB port, cable, dock, or hub, or if the device becomes disconnected during restore, try troubleshooting the USB connection, then troubleshooting your security software.
    If you checked your connections and are still seeing the error message, check for hardware issues.
    Check for hardware issues
    Related errors: 1, 3, 10, 11, 12, 13, 14, 16, 20, 21, 23, 26, 27, 28, 29, 34, 35, 36, 37, 40, 1000, 1002, 1004, 1011, 1012, 1014, 1667, or 1669.
    Try to restore your iOS device two more times while connected with a cable, computer, and network you know are good. Also, confirm your security software and settings are allowing communication between your device and update servers. If you still see the error message when you update or restore, contact Apple support.
    Do you have a different computer that you could try ?
    If you continue to see error 4005, 4013, or 4014 when you restore your device, contact Apple for support.

  • Pls Help Out: Exception Details: CrystalDecisions.CrystalReports.Engine.LogOnException: Logon failed.

    Post Author: olabisi
    CA Forum: .NET
    Hello All,
    i am working on a project and try to come up with a report using crystal report that is embedded with vs 2003.net and the following error was generated.
    this is the error in detail:
    Server Error in '/BISI' Application.
    Logon failed.
    Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code. Exception Details: CrystalDecisions.CrystalReports.Engine.LogOnException: Logon failed.Source Error:
    An unhandled exception was generated during the execution of the current web request. Information regarding the origin and location of the exception can be identified using the exception stack trace below. Stack Trace:
    &#91;LogOnException: Logon failed.&#93;
        . I(String   , EngineExceptionErrorID   )
        . D(Int16   , Int32   )
        . C(Int16   )
       CrystalDecisions.CrystalReports.Engine.FormatEngine.GetLastPageNumber(ReportPageRequestContext reqContext)
       CrystalDecisions.ReportSource.LocalReportSourceBase.GetLastPageNumber(ReportPageRequestContext reqContext)
       CrystalDecisions.Web.ReportAgent.get_LastPageNumber()
       CrystalDecisions.Web.ReportAgent.u(Boolean  n)
       CrystalDecisions.Web.CrystalReportViewer.OnPreRender(EventArgs e)
       System.Web.UI.Control.PreRenderRecursiveInternal()
       System.Web.UI.Control.PreRenderRecursiveInternal()
       System.Web.UI.Control.PreRenderRecursiveInternal()
       System.Web.UI.Page.ProcessRequestMain()
    Version Information: Microsoft .NET Framework Version:1.1.4322.573; ASP.NET Version:1.1.4322.573
    Note: this report has a main report that have three subreport in it. It was working fine until i added the third sub report to the main form.I will be glad if a solution could come up fast. This is  my email : [email protected] or [email protected]
    Jacobs

    Post Author: mewdied
    CA Forum: .NET
    You need to make sure that you are passing the database logon code to the third sub-report correctly.  If you are currently only passing database logon to the main report, it may be that the other two subreports are using the same connection as the main, but the third one is using something different.

  • Whatsapp Problem someone pls help out

    Initially my whatsapp went into optimizing by itself and its taking too long and there was no percentage indicating anything. so I back up my whatsapp to my computer manually but did not back up through icloud. Now restoring back is taking too long and its from icloud. will my data still be there ? its my iphone 4

    you are setting port no to 0, but then you are not
    changing it, and then you are checking to see if it is
    0, which it must be! By the way, why are you not just
    using JDBC native connection, rather than JDBC:ODBC
    bridge?Well, that's not the problem.. I'm going to get the port no etc. later..I've just hardcoded the values currently. After 8 hrs, I finally figured out what the problem is.. "my bean is not remembering the resultset inspite of setting the scope to session."
    Anyways, thanks for your reply!!
    As for your question on JDBC Native driver, I'm using DB2 as my Database and Tomcat server. So I thought I needed to use JDBC:ODBC driver. (Atleast the book says so.. I don't know.. I'm still familiarizing myself with all these)
    Now can you tell me how I can save the resultset value got from the bean to retrieve it later from a JSP? I would really appreciate any input w.r.t. Bean Sessions. I'm not clear about this still. What are the values that a bean can store? If I need the resultset later, how can I retrieve it?
    -NJU

  • Unable to Intialize HDV deck - can anyone pls help me with this FCE Issue?

    I have recently moved from a MacBook Pro (circa 2 yrs old) to a new MacBook Pro with the NEW firewire 800 port. I have bought a new firewire cable and my camera does not want to be capture from my Sony A1E.
    I have a MacBook Pro 2.8ghz running on OS X 10.6.2 and have all the updates installed for FCE.
    Every time i try to capture the message comes up "Unable to Intialize HDV deck. Please make sure a deck is connected and try again".
    The System is set up to receive the correct frame rate footage and type of footage (which is: HDV-Apple Intermediate Codec 1080i50. Formats: All formats). I am running on PAL, so 25fps.
    Is there any advice / direction that you could give me at all as I am struggling!
    Any help support would be appreciated!
    Thanks, Martin

    Hi,
    Would you confirm that you are using a 9-pin to 4-pin FW cable to connect to your camcorder and that your camcorder is the only FW device connected to your Mac.
    When you start up FCE with the camera connected to your Mac and already powered on in VTR mode, does FCE 'see' the camera, or do you get a warning message that FCE is "Unable to locate the following external devices ..." ?

  • Can anyone help out with an I issue that is showing on my iPhone?

    Recently I discovered I was running version6.13 (10B329)
    Can anyone explain what this is and how it ended up on my iPhone?

    That simply indicates the build number (sub-version, sort of) of the software, and takes into account beta and test builds. From a user standpoint, it doesn't mean a great deal. There would have been only one "build" available for your device.

  • Can anyone help out with an ongoing issue?

    I have been informed by Apple that my ISP is allowing my computer to be accessed remotely via some type of bridge support or ad hoc network! I have tried to remain proactive w/ addressing this issue but things have been frustratingly tumultuous within my county for some time now. It seems as if a business is assumig co ownership of my MacBook, That being said I know all stems from my ISP and their ability to manipulate my network! Can anyone offer any suggestions? I have been informed my best route is to sell my devices and leave this small minded county in my rear view, That's my plan moving forward but I don't want my computer os phone to be compromised repeatedly!

    Tony_CEE wrote:
    I have been informed by Apple that my ISP is allowing my computer to be accessed remotely via some type of bridge support or ad hoc network!
    How did Apple inform you of this, it s a most unusual move on their part (in fact it is the first time I have ever heard it)
    Unless you have sharing enabled and sharing services turned on this is highly unlikely (if another person has physical access to your Mac not so unlikely)
    What makes you think that some other person has control of yor Mac?

  • HT4623 I AM FACING PROBLEM AFTER UPDATING (7.0.4) MY PHONE MODEL 5C,AFTER THIS UPDATE SOME TIMES I CANT MAKE CALLS & SOME TIMES WHEN ANY BODY ELSE WANTS TO CALL ME BACK THE MESSAGE COME THAT THE USER IS NOT REACHABLE.PLS HELP

    I AM FACING PROBLEM AFTER UPDATING (7.0.4) MY PHONE MODEL 5C,AFTER THIS UPDATE SOME TIMES I CANT MAKE CALLS & SOME TIMES WHEN ANY BODY ELSE WANTS TO CALL ME BACK THE MESSAGE COME THAT THE USER IS NOT REACHABLE.PLS HELP

    I am facing the same issue! I bought 5c few days back
    and everything was fine till I updated the software 7.0.4!
    Whenever am connected to wifi am unable to make a call and if someone tries
    Calling me they get the message that my number is not
    Reachable! When I go back to 3G the calls work perfectly!!
    Please help me out since I use wifi more than my network.
    Appreciate any advise on this

  • I just bought my ipad 4 but i can't install game for free in Apps store. Why. Pls help me

    Hello my friend. Pls help me. I just bought my IPAD 4 yesterday. However, itry to install games free in Apps Store. But it cant works. Why. Pls help me to solve this issue.
    Thanks
    darliene

    Hi. This is my first time to downloads apps free even I've put my apple I'd it won't works. So regret. Then it appears message "this apple I'd has not yet been used in the iTunes Store"... So what I need to do. Pls help me. I m not going to the centre yet. Hope u can help me. Is it regarding the settings itself. Pls help me.thank u

  • Disable a field programatically in the OAF Page...pls  help !!!!!!!!!!!!!!

    Hi ,
    My requirement is-
    I have a region in the page which has 4 fields.Based on a condition I need to disable these fields.
    For this I tried extending a VO and created a transient Boolean Attribute and kept a SPEL expression in Read Only property for these attributes so that if i set the value in the controller to true / false the fields will be enabled or disabled accordingly.
    I extended the controller and wrote the below code.But it is not working as expected.PLSSSSSSSSSSSSSSSSS hELP.
    HzPuiOrganizationProfileAMImpl aam = (HzPuiOrganizationProfileAMImpl)oapagecontext.getApplicationModule(oawebbean);
    oawebbean.
    //OAViewObject mreqVO = (OAViewObject) (HzPuiOrganizationProfileAMImpl)oapagecontext.getApplicationModule(oawebbean).findViewObject("xxHzPuiOrganizationProfilesVO");
    // xxHzPuiOrganizationProfilesVOImpl xvo = (xxHzPuiOrganizationProfilesVOImpl)oapagecontext.getApplicationModule(oawebbean).findViewObject("xxHzPuiOrganizationProfilesVO");;
    //xvo.getCurrentRow().getAttribute("DisableAttr");
    xxHzPuiOrganizationProfilesVOImpl xvo = (xxHzPuiOrganizationProfilesVOImpl)oapagecontext.getApplicationModule(oawebbean).findViewObject("HzPuiOrganizationProfilesVO");
    int i =xvo.getRowCount();
    // throw new OAException("test "+String.valueOf(i),OAException.ERROR); -- HERE I GET THE COUNT AS 1
    String rowReference = oapagecontext.getParameter(OAWebBeanConstants.EVENT_SOURCE_ROW_REFERENCE);
    if(rowReference != null)
    xxHzPuiOrganizationProfilesVORowImpl xxvorowimpl = (xxHzPuiOrganizationProfilesVORowImpl)aam.findRowByRef(rowReference);
    xxvorowimpl.setDisableAttr(Boolean.FALSE); //setreadOnlyAttr(Boolean.TRUE);
    throw new OAException("hi",OAException.ERROR);
    RowSetIterator Iter = xvo.createRowSetIterator("DataIter");
    Iter.setRangeStart(0);
    Iter.setRangeSize(i);
    Row row = null;
    row = Iter.getRowAtRangeIndex(0);
    row.setAttribute("DisableAttr",Boolean.TRUE);
    //xvo.getCurrentRow().setAttribute("DisableAttr",Boolean.FALSE);
    pls help me in solving the issue.
    Thanks
    Ramya

    Hi,
    Sample Method:
    public void DeleteMeasurePeriods()
    int fetchedrowcount;
    RowSetIterator deleteIter;
    OADBTransaction tr = getOADBTransaction();
    PeriodsVORowImpl row=null;
    PeriodsVOImpl mpvo=getPeriodsVO1();
    fetchedrowcount=mpvo.getRowCount();
    deleteIter = mpvo.createRowSetIterator("deleteIter");
    deleteIter.setRangeStart(0);
    deleteIter.setRangeSize(fetchedrowcount);
    for(int i=0;i<fetchedrowcount;i++)
    row= (PeriodsVORowImpl)deleteIter.getRowAtRangeIndex(i);
    if()
    row.setAttribute("DisableAttr",Boolean.TRUE);
    else
    row.setAttribute("DisableAttr",Boolean.FALSE);
    deleteIter.closeRowSetIterator();
    Regards
    Meher Irk

  • My lockscreen did not showing me time and it lags, help PLS!  it´s only black background with unlock button and it lags when i unlocking it  pls help

    My lockscreen did not showing me time and it lags, help PLS!
    it´s only black background with unlock button and it lags when i unlocking it
    pls help

    It's not an Apple issue and Apple has nothing to do with it.
    The only way to buy an iPhone officially refurbished by Apple is to buy it from an Apple store or via Apple's website.
    Refurbished iPhones sold via other retailers are not refurbished by Apple.
    Sounds like Wireless Wave did all they could... they refunded your money.
    Your only issue is with them.  Stop getting all worked up over it.

Maybe you are looking for