Hi we are getting Errors in file /apps/oh2/diag/rdbms/bsdp12/BSDP122/trace/BSDP122_q01c_5899122.trc: ORA-00904: "UTL_RAW"."CAST_FROM_NUMBER": invalid identifier alert in alertlog
Errors in file /apps/oh2/diag/rdbms/bsdp12/BSDP122/trace/BSDP122_q01c_5899122.trc:
ORA-00904: "UTL_RAW"."CAST_FROM_NUMBER": invalid identifier
DB version 11.2.0,.4
and Replication getting ab-ended with below error
SourceLine
: [817]
2015-03-29 14:07:12 ERROR OGG-00665 OCI Error executing single row select (status = 26695-ORA-26695: error on call to dbms_lock.release: return code 4
ORA-06512: at "SYS.DBMS_LOGREP_UTIL", line 197
ORA-06512: at "SYS.DBMS_LOGREP_UTIL", line 240
ORA-06512: at "SYS.DBMS_LOGREP_UTIL", line 493
ORA-06512: at "SYS.DBMS_APPLY_ADM_INTERNAL", line 2375
ORA-26790: Requesting a lock on set_dml_conflict_handler "" timed out
ORA-06512: at "SYS.DBMS_XSTREAM_GG_ADM", line 335
ORA-06512: at line 1), SQL<DECLARE PRAGMA AUTONOMOUS_TRANSACTION;BEGIN dbms_xstream_gg_adm.set_dml_conflict_handler(
apply_name=>:1, source_object=>:2, object=>:
3,
conflict_handler_name=>:4, operation_name=>:5, conflict_type=>:6,
method_name=>:7, column_list=>:8, resolution_column=>:9);END;>.
Thanks
Similar Messages
-
I am having a terrible time trying to convert my QT file to an AVI file so I can use in PowerPoint. I am getting Error 43 File not Found, any suggestions?
Hi Jenna,
The error your getting suggests a file path problem.
How are you embedding the movie in PP and where is the movie file located relative to the PP file? Are you getting this error within PP when the slide containing the embedded video is displayed?
If you embed a movie and then move it or change its name then PP will generate this error.
Alastair. -
While updating databse from 9 to 10.2.0.1 in linux we are getting error
When i tried to upgrade 9 to 10.2.0.1, we are getting errors while running catupgrd.sql , Following is the error message. Please assist me.
Package body created.
No errors.
Package body created.
No errors.
Package body created.
No errors.
Package body created.
PL/SQL procedure successfully completed.
declare
ERROR at line 1:
ORA-31011: XML parsing failed
ORA-06512: at "XDB.DBMS_XMLSCHEMA_INT", line 3
ORA-06512: at "XDB.DBMS_XMLSCHEMA", line 14
ORA-06512: at line 143
PL/SQL procedure successfully completed.
PL/SQL procedure successfully completed.
declare
ERROR at line 1:
ORA-01403: no data found
ORA-06512: at line 5
Commit complete.
call xdb.dbms_xdbz0.initXDBSecurity()
ERROR at line 1:
ORA-31000: Resource 'http://xmlns.oracle.com/xdb/acl.xsd' is not an XDB schema
documentHi,,
Thanks for reply, I tired it still no luck here is the error,
Commit complete.
call xdb.dbms_xdbz0.initXDBSecurity()
ERROR at line 1:
ORA-31000: Resource 'http://xmlns.oracle.com/xdb/acl.xsd' is not an XDB schema
document
BEGIN
ERROR at line 1:
ORA-29329: Table not of type XMLType
ORA-06512: at "XDB.DBMS_XDBZ0", line 232
ORA-06512: at "XDB.DBMS_XDBZ", line 7
ORA-06512: at line 2
Commit complete.
grant all on XDB.XDB$ACL to public
grant all on XDB.XDB$ACL to public
ERROR at line 1:
ORA-00942: table or view does not exist
Commit complete.
declare
ERROR at line 1:
ORA-03113: end-of-file on communication channel
ERROR:
ORA-03114: not connected to ORACLE
ERROR:
ORA-03114: not connected to ORACLE
Please assist me.
Thanks. -
Getting error logical file name not maintained adequtely
Hi,
when i execute a z report and press the download botton getting error logical file name not maintained adequtely,see long text.
Below code i wriien. Please somebody help..
DATA: lt_rows TYPE lvc_t_row.
CASE e_ucomm.
WHEN 'DOWNL'.
Determine and construct OS specific file name *
PERFORM get_file_name_for_os.
in the above perform , i wriien
FORM build_file_name USING pf_os
pf_with_file_extension
pf_param_1
pf_format
pf_fname.
DATA: lf_para1(20) TYPE c.
pf_param_1 hold the materialnr with leading zeros not prefered in *
download file name *
WRITE pf_param_1 TO lf_para1.
CALL FUNCTION 'FILE_GET_NAME'
EXPORTING
CLIENT = SY-MANDT
logical_filename = 'Z_MATERIAL_BOM_FILE'
operating_system = pf_os
parameter_1 = lf_para1
PARAMETER_2 = ' '
PARAMETER_3 = ' '
USE_PRESENTATION_SERVER = ' '
with_file_extension = pf_with_file_extension
USE_BUFFER = ' '
IMPORTING
EMERGENCY_FLAG =
file_format = pf_format
file_name = pf_fname
EXCEPTIONS
file_not_found = 1
OTHERS = 2
Error handling.
CASE sy-subrc.
WHEN '1'.
MESSAGE e014(ba) WITH 'Z_MATERIAL_BOM_FILE'. "error message i am getting LEAVE.
WHEN '2'.
MESSAGE e213(ky) WITH 'Z_MATERIAL_BOM_FILE'.
LEAVE.
ENDCASE.Hi.
In file txn,
click on "Logical File Name Definition, Cross-Client" from the left.
Then click position and check for your logical file name.
If you dont get it, it means you need to create it. You can click on New Entries to create.
Thanks
Mani -
PDF file won't open after saving it from the web. get error message file is damaged.
My PDF files won't open after saving them to Docs from the web. I get error message file is damaged. Can someone help me correct this problem on Mac Air w Mountain Lion?
I wonder if the image is being embedded somehow and there is not enough scratch disk space to render the file. Just a hunch. Check your hardrive to see how much free space is available. Also, check your RAM and see if you can upgrade ( install more, install much more ) to max out as much RAM as possible. At a minimum, check for fragmentation and do a "Correct Permissions" via Apple's Disk Utility.
But, weird things start happening when a font becomes corrupt. Not that one is, but it may be in your best interest to acquire a font management utility like Font Agent PRO ( if you don't have one already ). A good font management program can detect and disable corrupt fonts.
CS1 and OSX10.4 should be fairly compatable with the 7500, but you may have gone as far as you can go. Think about upgrading to a G4 or a G5. I believe the 7500 was pre G3 ( which I think is the minimum requirements for CS1 ). -
[SOLVED]getting "error 15: file not found!"
Hi all, I'm new to Arch and linux in general but i've managed so far and I'm really enjoying it.
I'm dual booting Arch and Vista.
Anyway, everything was working fine until I decided that I wanted to stop using GRUB as my bootloader and I used a program called EasyBCD and this guide http://apcmag.com/how_to_dualboot_vista … htm?page=4
Now, I get "Error 15: File not found!" when i try to boot into arch. I've looked through countless other threads and google results with people with the same problem but none of the solutions in those threads helped me.
here's my menu.lst
# Config file for GRUB - The GNU GRand Unified Bootloader
# /boot/grub/menu.lst
# DEVICE NAME CONVERSIONS
# Linux Grub
# /dev/fd0 (fd0)
# /dev/sda (hd0)
# /dev/sdb2 (hd1,1)
# /dev/sda3 (hd0,2)
# FRAMEBUFFER RESOLUTION SETTINGS
# +-------------------------------------------------+
# | 640x480 800x600 1024x768 1280x1024
# ----+--------------------------------------------
# 256 | 0x301=769 0x303=771 0x305=773 0x307=775
# 32K | 0x310=784 0x313=787 0x316=790 0x319=793
# 64K | 0x311=785 0x314=788 0x317=791 0x31A=794
# 16M | 0x312=786 0x315=789 0x318=792 0x31B=795
# +-------------------------------------------------+
# for more details and different resolutions see
# http://wiki.archlinux.org/index.php/GRUB#Framebuffer_Resolution
# general configuration:
timeout 3
default 2
color light-blue/black light-cyan/blue
# boot sections follow
# each is implicitly numbered from 0 in the order of appearance below
# TIP: If you want a 1024x768 framebuffer, add "vga=773" to your kernel line.
# (0) Arch Linux
title Arch Linux
root (hd0,2)
kernel /boot/vmlinuz26 root=/dev/disk/by-uuid/6e30f601-1196-41bf-b9f3-063434fa0c45 ro
initrd /boot/kernel26.img
# (1) Arch Linux
title Arch Linux Fallback
root (hd0,2)
kernel /boot/vmlinuz26 root=/dev/disk/by-uuid/6e30f601-1196-41bf-b9f3-063434fa0c45 ro
initrd /boot/kernel26-fallback.img
# (2) Windows
title Windows
rootnoverify (hd0,0)
makeactive
chainloader +1
Last edited by tooeasyforkevin (2009-07-13 06:48:38)ok, try doing it the manual way by booting the cd as if you where to do an installation where it prompts you to log in as root.
Once your logged in as root do
grub
and you will get the grub prompt
grub>
then the at the grub> prompt do
grub> root (hd0,2)
that tells grub it will find the boot files on the 3rd partition of the 1st hard drive. Then,
grub> setup (hd0)
to setup the grub bootloader on the MBR of the first hard drive.
If all goes well you should see something like 'Checking if "/boot/grub/stage1" exists... yes '.
grub> quit
and reboot. -
Getting error in file transfer from one system to another system
Hi All
One of my client (User) wants to transfer his file from SAP R/3 System SAP XI system. He is using a customize t-code ZFIR0325 (Trial balance report transfer to Hyperian System). When user execute the program he is getting error "File Transfer Failed due to Network chk with Admin"
I checked with Network team but they said it is okay from their side. We also check for authorization but there is no issue regarding authorization.
Name of File Path of Aplication Server, XI destinaion and XI directory entered by user is correct.
We also put authorization trace in XI System to RFC User (In file transfer from one system to another system this RFC User is geeing Used) but no authorization issue was found.
Please help me to resolve this problem. I any detail require I will provide the same.Guruprasad Wrote:
He is using a customize t-code ZFIR0325 (Trial balance report transfer to Hyperian System).
We also put authorization trace in XI System to RFC User (In file transfer from one system to another system this RFC User is geeing Used) but no authorization issue was found.
Firstly, no one in the community can answer on how a custom transcation code and a program associated with it behaves.
If there are no authorization issues in the system, you have to look at the exact error message. Look if your XI system is allowed to receive files from the SAP system.
Unfortunately, you should do some more home work before putting your question here. If everything is fine and configured correctly, then the issue might be with the program.
Regards,
Raghu -
I've found this question is elswhere but no answers. I'm trying to consolidate my library to an external hard drive since I'm pretty sure my current drive is about to fail. The entire process has taken me days due to one error or another. This is my most recent error and so far there is no way around it since it does not show me what file is in use.
Help?I used "Carbon Copy Cloner" to copy my library from one external disk to another.
The "library" consists of a bunch of files and folders (see links at end). You don't need CCC to copy it, just drag the whole iTunes folder in your Home > Music from one drive to the other.
I pointed my iTunes library to the new location under iTunes preferences.
No, don't do it with preferences. Once you have moved the folder as above, start iTunes with the option key held down and guide it to the library.itl file on the new drive. This is assuming you have been using iTunes's default settings and haven't been managing your media yourself.
I used iTunes to "Consolidate Library" to verify that all files had been moved.
Okay, in doing that you have moved just your media to the new drive but left all your other library files on the old drive.
iTunes succesfully copied/re-attached a lot of files before giving me the error that the disk could not be read or written to.
Try it with my method.
I began to troubleshoot the hard drive by checking the cables and scanning for errors.
This disk checked out fine.
I identified the failure and subsequent error was due to corrupted files.
I watched the consolidation process and was able to see which file it was trying to copy before it errored out.
I deleted the corrupted file and restarted the process (I repeated this numerous times).
When the process seemed to be just about over, I got the error "Copying files failed. The required file is in use."
I'm sure this is likely another corrupted file, however, it happens so fast that I have no way to identify what file is causing the problem. I tried making sure no other processes were running and no other windows or media players were open. I also tried to look for an error log but was unsuccessful.
Any ideas?
Disk Utility will scan for a corrupt directory but I don't think it works on the file level if it is a single file that was corrupted. I know I have seen Carbon Copy Cloner pick up on single file error when I had one sitting on a bad sector of a drive several years ago. If you can identify the corrupt file this way then you will have to use a backup copy since it is unlikely it can be rescued.
If you have Diskwarrior it has a file check utility.
You have, of course, restarted your computer before doing all this, and keep other computer activity to a minimum (don't play music while copying the files and don't use other applications that coupld potential be trying to get access to your files)?
What are all those iTunes files? - http://www.macworld.com/article/139974/2009/04/itunes_files.html
iTunes 9 [and later]: Understanding iTunes Media Organization - http://support.apple.com/kb/ht3847 -
While importing clip getting error "The file contains too many audio channels" in premiere pro cs5
Hey,
I am using video clips from sony digital hi8 camera and trying to import video clips (.mov) 720*480 fps 29.97 .But unable to get into premiere pro cs5.System configuration:
MAC 10.6.4
2.66ghz intel core i7
4gb ram
nvidia geforce gt 330 mn.
Error :
Actually ,i have checked the inspector panel and i found same infomation in
in this panel for both clips .please check these clips screen shoots seprately .
Actually i have a long video clip and i have scatterred this clip into 6 diffrent portions
where i am not able to import the last video clip.It is giving me same error "file contain too many audio channels"".
Regards
ManojI too am getting this error in Premiere CS5. I was digitizing a Broadcast VHS and since I did not have a breakout box, I hooked it up to a Sony DV deck so I could connect via firewire and capture inside Premiere. I was able to capture and import 1 of the 3 clips and it did have 4 audio channels attached to it. However, upon closer inspection only 2 channels had a waveform. I captured the other 2 clips the same way, but this time, Premiere give the error "The file contains too many audio channels."
Any ideas? -
Getting error "This file was removed" when trying to use sdk/test/httpd.
Hi, I wish to test my website using httpd.js. Now when I am trying create a add-on and use sdk/test/httpd by adding following line
var { nsHttpServer } = require("sdk/test/httpd");
I am getting following error:
Message: Error: This file was removed. A copy can be obtained from:
https://github.com/mozilla/addon-sdk/blob/master/test/lib/httpd.js
As new to Add on development I am unable to resolve this issue.
Thanks in advance.Apologies for redirecting you to a different site, but this forum primarily handles end-user support. For extension development advice, please try here: [https://forums.mozilla.org/viewforum.php?f=7 Extension Development - Mozilla Add-ons Forum].
-
Getting error while file uploading in struts
Hi!
I am getting this error while file uploading,I can't find any solution.
SRVE0026E: [Servlet Error]-[org.apache.commons.fileupload.FileUpload: method setSizeMax(I)V not found]: javax.servlet.ServletException: org.apache.commons.fileupload.FileUpload: method setSizeMax(I)V not found
at com.honeywell.sdm.base.controller.SDMActionServlet.service(SDMActionServlet.java:75)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at com.ibm.ws.webcontainer.servlet.StrictServletInstance.doService(StrictServletInstance.java:110)
at com.ibm.ws.webcontainer.servlet.StrictLifecycleServlet._service(StrictLifecycleServlet.java:174)
at com.ibm.ws.webcontainer.servlet.IdleServletState.service(StrictLifecycleServlet.java:313)
at com.ibm.ws.webcontainer.servlet.StrictLifecycleServlet.service(StrictLifecycleServlet.java:116)
at com.ibm.ws.webcontainer.servlet.ServletInstance.service(ServletInstance.java:283)
at com.ibm.ws.webcontainer.servlet.ValidServletReferenceState.dispatch(ValidServletReferenceState.java:42)
at com.ibm.ws.webcontainer.servlet.ServletInstanceReference.dispatch(ServletInstanceReference.java:40)
at com.ibm.ws.webcontainer.webapp.WebAppRequestDispatcher.handleWebAppDispatch(WebAppRequestDispatcher.java:983)
at com.ibm.ws.webcontainer.webapp.WebAppRequestDispatcher.dispatch(WebAppRequestDispatcher.java:564)
at com.ibm.ws.webcontainer.webapp.WebAppRequestDispatcher.forward(WebAppRequestDispatcher.java:200)
at com.ibm.ws.webcontainer.srt.WebAppInvoker.doForward(WebAppInvoker.java:119)
at com.ibm.ws.webcontainer.srt.WebAppInvoker.handleInvocationHook(WebAppInvoker.java:276)
at com.ibm.ws.webcontainer.cache.invocation.CachedInvocation.handleInvocation(CachedInvocation.java:71)
at com.ibm.ws.webcontainer.cache.invocation.CacheableInvocationContext.invoke(CacheableInvocationContext.java:116)
at com.ibm.ws.webcontainer.srp.ServletRequestProcessor.dispatchByURI(ServletRequestProcessor.java:186)
at com.ibm.ws.webcontainer.oselistener.OSEListenerDispatcher.service(OSEListener.java:334)
at com.ibm.ws.webcontainer.http.HttpConnection.handleRequest(HttpConnection.java:56)
at com.ibm.ws.http.HttpConnection.readAndHandleRequest(HttpConnection.java:618)
at com.ibm.ws.http.HttpConnection.run(HttpConnection.java:439)
at com.ibm.ws.util.ThreadPool$Worker.run(ThreadPool.java:672)
Please help me.I have attached the bean,action ,jsp pages
uploadInfo.jsp
<%@ taglib uri="/WEB-INF/struts-bean.tld" prefix="bean" %>
<%@ taglib uri="/WEB-INF/struts-html.tld" prefix="html" %>
<%@ taglib uri="/WEB-INF/struts-logic.tld" prefix="logic" %>
<html:html>
<HEAD>
<script>
function submitting(){
document.uploadForm.operation.value = "uploadOrgAdj";
document.uploadForm.action = "/uploadRecAction.do";
document.uploadForm.submit();
</script>
</HEAD>
<body>
<html:form action="/uploadRecAction" method="post" enctype="multipart/form-data">
<b>Select the .xls File to upload data </b>
<html:file property="fileName"></html:file>
<html:hidden property="operation" value=""/>
<html:button property="btn" value="Submit" onclick="submitting()"></html:button>
</html:form>
</body>
</html:html>
uploadAdjForm :
import javax.servlet.http.HttpServletRequest;
import org.apache.struts.action.ActionError;
import org.apache.struts.action.ActionErrors;
import org.apache.struts.action.ActionForm;
import org.apache.struts.action.ActionMapping;
import org.apache.struts.upload.FormFile;
public class uploadAdjForm extends ActionForm{
private FormFile fileName;
* @return
public FormFile getFileName() {
System.out.println("getFileName"+fileName);
return fileName;
* @param string
public void setFileName(FormFile string) {
System.out.println("setileNmame"+string);
fileName = string;
Action:
public class uploadFinancialAdjAction extends DispatchAction{
public org.apache.struts.action.ActionForward uploadOrgAdj(org.apache.struts.action.ActionMapping mapping, org.apache.struts.action.ActionForm form, javax.servlet.http.HttpServletRequest request, javax.servlet.http.HttpServletResponse response) throws Exception {
String sForward = "UploadInfo";
HttpSession session = request.getSession();
String sStartIndex = null;
String sEndIndex = null;
try
uploadFinancialAdjForm UploadForm=(uploadFinancialAdjForm)form;
System.out.println(UploadForm.getFileName().getContentType().toString());
String file=UploadForm.getFileName().toString();
uploadFinancialAdjManager businessManager = new uploadFinancialAdjManager();
ArrayList fileName = new ArrayList(); fileName = businessManager.getOrgAdjDetails(file);
boolean isMultipart = FileUpload.isMultipartContent(request);
if(isMultipart){
// Create a new file upload handler
DiskFileUpload upload = new DiskFileUpload();
// Parse the request
List items = upload.parseRequest(request);
//Process the uploaded items
Iterator iter = items.iterator();
while (iter.hasNext()) {
FileItem item = (FileItem) iter.next();
if (item.isFormField()) {
//processFormField(item);
if(item.getFieldName().equalsIgnoreCase("txtStartIndex")){
sStartIndex = item.getString();
else if(item.getFieldName().equalsIgnoreCase("txtEndIndex")){
sEndIndex = item.getString();
uploadFinancialAdjForm UploadForm=(uploadFinancialAdjForm)form;
String file=UploadForm.getFileName().toString();
uploadFinancialAdjManager businessManager = new uploadFinancialAdjManager();
ArrayList fileName = new ArrayList();
fileName = businessManager.getOrgAdjDetails(file);
}else{
if(item.getName()!=null && !item.getName().toUpperCase().endsWith(".XLS")){
throw new Exception("Please browse an excel file and Upload");
session.setAttribute("fileItem",item);
}//end of while
session.setAttribute("startIndex",sStartIndex);
session.setAttribute("endIndex",sEndIndex);
request.setAttribute("FileUploadStatus","true");
else{
throw new Exception("Error:Form is not multipart");
catch(Exception e)
System.out.println(e);
return mapping.findForward(sForward);
}ORA-06512: at "PREPRD.OIM_SP_RECONARCHIVAL", line 722
ORA-00942: table or view does not exist
ORA-01031: insufficient privileges
(1) Check whether the OIM_SP_RECONARCHIVAL table or view exists or not...
(2) If it exists, check whether the DEV_OIM user has enough privilege to view this table or not...
If not, give it all privilege by login as sys as sysdba
GRANT ALL PRIVILEGES TO DEV_OIM;
COMMIT; -
When I Update My Nano, I get error message, "file not found"
When I Update My Nano, I get an error message, "file not found, cannot update iPod". I have looked through the manual and tried reinstalling the iTunes program but it still won't update my iPod with music or pictures. PLease help.
Try these basic troubleshooting steps one at a time.
The Five Rs. -
Getting Error: Config file does not have IDStore WLS Administrator Username
I am configuring OIM/OAM in HA mode following the EDG:
- Enterprise Deployment Guide for Oracle Identity Management
- 11g Release 1 (11.1.1.5)
I am at step
- 10.4.5 Creating Users and Groups for Oracle WebLogic Server
I am executing this command:
- idmConfigTool.sh -prepareIDStore mode=WLS input_file=wls.props
Where wls.props has these values:
IDSTORE_HOST: admin.mycompany.com
IDSTORE_PORT: 389
IDSTORE_BINDDN: cn=orcladmin
IDSTORE_USERNAMEATTRIBUTE: cn
IDSTORE_LOGINATTRIBUTE: uid
IDSTORE_USERSEARCHBASE: cn=Users,dc=mycompany,dc=com
IDSTORE_GROUPSEARCHBASE: cn=Groups,dc=mycompany,dc=com
IDSTORE_SEARCHBASE: dc=lispa,dc=local
POLICYSTORE_SHARES_IDSTORE: true
and I am getting this error:
Config file does not have IDStore WLS Administrator Username
Any idea why ?I have added to the property files:
IDSTORE_SYSTEMIDBASE : cn=systemids,dc=mycompany,dc=com
But its not solving the issue.
Here is the log:
Jun 3, 2013 10:01:55 AM oracle.idm.automation.util.Util setLogger
WARNING: Logger initialized in warning mode
Jun 3, 2013 10:01:59 AM oracle.idm.automation.impl.oid.handlers.OIDIntegrationHandler validateInputParams
SEVERE: Config file does not have IDStore WLS Administrator Username
Please advise on how to resolve this issue -
Highjump Messages are Getting error response from Peoplesoft
Hi,
We are on PT 8.52 and 9.1 PeopleSoft FSCM. We have integration with highjump for our supply chain operations.
We are getting below error message occasionally on highjump and the message will be sent to PeopleSoft if you resubmit that same message again from HJ.
A COM error occurred running the execute function in the [XmlLinkSend.XmlSend]
COM object to process the [XML Send AdvLink Work Queue] event.
Exception number (0x80040001).
Return Code (0001).
Source [XmlLinkSend.XmlSend].
Description [An er E_04001 O2012101811:00:10.855S
1SMGR 000
Any info on why these errors are coming on highjump logs will be appreciated.
ThanksHi surya,
You are saying 1122124 is IDOC numner & its not relevant to this idoc.
What it means,can u explain??? Actually there will be a chance an IDOC can mapped to N no of documents. This mapping will done through a BADI internally.
Regards
KER -
I get error message file is corrupt for firefox 3.6
every time i try to download firefox 3.6 i get to extraction and i get an error message "file is corrupt." i do not like using the firefox beta version. can you try to help me figure out why i can not download or install or use 3.6. or can you come up with a newer version that is not beta whatsoever. i loved EVERTYHING about 3.6 until it stopped working on my laptop. i've even tried installing it on my desktop and i get the same error message. is it just the 3.6 version or is it something i'm doing wrong. please help me fix this.
You will need to create a new profile if you didn't create one for the 4.0 beta version.
See:
http://kb.mozillazine.org/Profile_Manager
[[Basic Troubleshooting#Make_a_new_profile|Basic Troubleshooting: Make a new profile]]
See also http://kb.mozillazine.org/Transferring_data_to_a_new_profile_-_Firefox
Maybe you are looking for
-
Problem updating iPod software (version 1.2)
I'm trying to update my video iPod (30GB) with the latest software (version 1.2) through iTunes, but I get the following message: "The iPod cannot be updated because it contains files that are in use by another application." I've tried restarting the
-
How can I create the component like ComboBox in flashlite2.0 ?
How can I create the component like ComboBox in flashlite2.0 I'm a new man, please gave me an example! Thanks.
-
Trying to share itunes from macbook to windows xp machine.
I've enabled home sharing on the macbook and can see the library ok on the xp machine. Can view and play tracks but cannot see any option to import tracks to xp machine. According to "help" there should be a window at the bottom giving this option bu
-
HT204053 Setting up my new ACER computer with ICLOUD
Hello, I am a customer of ICLOUD. I use it on my IPAD and IPHONE and had another old computer that I also used it on but now I have a new ACER computer, downoaded ICLOUD to it but am not able to sync my email contacts to get them in my mailbox on new
-
JPEG images transferred from my iPod to PC show up only as thumbnails
When I transfer JPEG images from my iPod that I imported from my Nikon Coolpix 5900, they could be viewed full resolution on my color display iPod. However, when I transferred them to my PC and opened the DCIM file they only showed up as thumbnails t