Hidden Frames and Stokes in author

Hi- I am thinking that the same hidden frames and strokes available to iwork 09 are available to ibook author. I am still trying to find the support files for author and see if they are there. If not it might be possible to copy them from iwork into author:
http://hints.macworld.com/article.php?story=20090111112648195

OK-here oare my modified plists. They work for me to allow the use of the new frames I hope you find them useful
1) Right click on the ibook author icon under applications and show package contents
2) Navigate to Contents:Resources and make a copy of KFGraphicInspectorFrames.plist ; SLGraphicInspectorFrames.plist and KFGraphicInspectorSmartStrokes.plist.
3) Copy the plists below into your Resources folder.
4) Close and open author- Your new frames and strokes should be available under inspector.
http://www.box.com/s/fr6erqe4yt05fyojyzi2
http://www.box.com/s/eh0bk13h33uidfayhunx
http://www.box.com/s/qx2bjeytgr9a260rprp6
*I do not warranty the work so always make a backup.

Similar Messages

Unlocking hidden frames and strokes for iBooks Author

Perhaps you know that there are hidden frames and strokes available for Pages, Keynote, and Numbers. There is even an installer (http://www.macupdate.com/app/mac/32390/frames-and-strokes-installer).
These same frames and strokes are available on iBooks Author.
Work on a backup copy for safety, of course.
To reveal hidden strokes, change iBooks Author.app/Contents/Resources/KFGraphicInspectorSmartStrokes.plist to:
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
<array>
          <string>Chalk2</string>
          <string>Feathered Brush</string>
          <string>Calligraphy</string>
          <string>Dry Brush</string>
          <string>Doodles</string>
          <string>BrushA</string>
          <string>Chalk</string>
          <string>Chisel</string>
          <string>Diamonds</string>
          <string>Fat</string>
          <string>Fuzzy Overstroke</string>
          <string>Outset</string>
          <string>Overstroke</string>
          <string>Repeating Squiggle</string>
          <string>Rounded</string>
          <string>Swipe</string>
          <string>Wobbly Overstroke</string>
</array>
</plist>
To reveal hidden frames, change iBooks Author.app/Contents/Resources/KFGraphicInspectorFrames.plist to
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
<array>
          <string>Headlines</string>
          <string>Formal Shadow</string>
          <string>Scrapbook2b</string>
          <string>Vintage Inset</string>
          <string>Crayon Line</string>
          <string>Blackboard</string>
          <string>Pushpin</string>
          <string>Green Paper</string>
          <string>School Play</string>
          <string>Antique</string>
          <string>Formal Inset</string>
          <string>Baby</string>
          <string>brownbook</string>
          <string>Classic Silk</string>
          <string>Comic_blue</string>
          <string>Comic_shadow</string>
          <string>comic_v1</string>
          <string>Creme_Main</string>
          <string>Creme_Sidebar</string>
          <string>Creme_Small</string>
          <string>dots</string>
          <string>Fine_Artist</string>
          <string>Freestyle</string>
          <string>Graph Paper</string>
          <string>green_linen</string>
          <string>hardcover-burgundy</string>
          <string>Hardcover</string>
          <string>hardcover-1</string>
          <string>Highlighter</string>
          <string>Jet Set</string>
          <string>kids-blue</string>
          <string>kids-pink</string>
          <string>kids_v1</string>
          <string>Leather Book</string>
          <string>leatherbook</string>
          <string>Letterpress</string>
          <string>Linen Book</string>
          <string>Modern</string>
          <string>Moroccan</string>
          <string>Nature</string>
          <string>Nature2</string>
          <string>NewTravel</string>
          <string>Nightlife</string>
          <string>None</string>
          <string>notebook_iweb</string>
          <string>Notebook</string>
          <string>oldwhite</string>
          <string>orangebook</string>
          <string>orangewood</string>
          <string>organic_v2</string>
          <string>Parchment</string>
          <string>photostack_v1</string>
          <string>Pinstripe</string>
          <string>Playtime_Blue</string>
          <string>Playtime_Green</string>
          <string>Playtime_waves</string>
          <string>Playtime</string>
          <string>Portfolio Inset</string>
          <string>Portfolio</string>
          <string>PrintedPaper</string>
          <string>RoadTrip_receipt</string>
          <string>Roadtrip</string>
          <string>rosewood</string>
          <string>Scrapbook2a</string>
          <string>Screenprint-Brush</string>
          <string>Showcase</string>
          <string>Silkscreen</string>
          <string>Spiral</string>
          <string>spiralbook-creme</string>
          <string>spiralbook</string>
          <string>Storyboard</string>
          <string>Tech Black</string>
          <string>Typeset</string>
          <string>Venetian</string>
          <string>Venetian2</string>
          <string>Vintage</string>
          <string>Watercolor_iweb</string>
          <string>Watercolor</string>
          <string>Watermark</string>
          <string>White Corners</string>
          <string>woodbook_v1</string>
</array>
</plist>

OK-here oare my modified plists. They work for me to allow the use of the new frames I hope you find them useful
1) Right click on the ibook author icon under applications and show package contents
2) Navigate to Contents:Resources and make a copy of KFGraphicInspectorFrames.plist ; SLGraphicInspectorFrames.plist and KFGraphicInspectorSmartStrokes.plist.
3) Copy the plists below into your Resources folder.
4) Close and open author- Your new frames and strokes should be available under inspector.
http://www.box.com/s/fr6erqe4yt05fyojyzi2
http://www.box.com/s/eh0bk13h33uidfayhunx
http://www.box.com/s/qx2bjeytgr9a260rprp6
*I do not warranty the work so always make a backup.

Autoplaying issue on hidden frames

Hi All,
Another interesting question that I want to rise up here is related to the video/audio autoplaying issue in hidden frames.
We're working on desktop application based on JavaScript/HTML/CSS and run within the Adobe AIR environment.One of the most craziest requirement which we have is to cache the URLS which are listed within the application. Other words we need to precache some pages to make they appearing immediately. As we use HTML/JavaScript we decided to make set of hidden frames and load the pages which are need to be cached in background. The issue is in the video/audio which can be on the cached pages. Often this video starts playing automatically on page loading event.
Is it possible to prevent autoplaying somehow?
Maybe hidden frames is not the best solution however we've to go with the frames after set of unsuccessful attempts and researches.

Hi, thanks for your reply.
You're right that flash player is embedded into web page, however as I already mentioned this page is loading into the frame within the Adobe AIR application.
We're working with HML/JS driven application not a flash one. The application layout hosts the iframe within and allow to navigate this iframe to specific page.
In case if page will contains the embedded flash player (e.g. youtube page) it may starts playing on load.
The main problem is that we can't access the code which came from another domain so the webkit doesn't allow us to access the embedded flash player within the 3rd party page and disable the playing.due to cross-domain security reasons.
Hope my explanation is clear so we can move forward if you have any ideas ).

Display pdf in a hidden frame

Hello,
I have written a servlet which calls a server application and get a pdf as response. When I call the pdf it will be print directly with the default printer. This is because of the javascript code which i have parsed to the pdf. The problem is that the pdf is always displayed with the adobe plugin in my browser. But it should be only printed in the background. Can I target the pdf to a hidden frame out of my servlet. Please give me a source code example how to fix my problem.
Thanx.

See Display pdf in a new Window in a JSPDynPage

Problem in Frame and JSP

hi all,
i built an web application and now i want to add a menu using frame in HTML or javascript. The problem is all my JSP pages are data dependant from one another that means sometimes i am sending the data using input boxes and sometimes using HIDDEN values in HTML. Now i tried this followig way to use frame and to send my data to other pages but it is not working can anyone please help me.
"DOES ANYONE KNOW WHETHER I CAN USE FRAME IN THE JSP PAGE OR NOT"
LOGIN.HTML
<form action="startframe.html" method="post">
<center><h2>Employee Number:</h2></center>
<center><input type="text" name="emplno" maxlength="4"size="4"></center></br>
<center><h2>Password:</h2></center>
<center><input type="password" name="pass" maxlength="6" size="6"></center></br>
<center><input type="submit" value="SUBMIT YOUR INFO"></center>
</form>
</body>
</html> DATA are GOING FROM LOGIN.HTML TO VARIFYLOGIN.JSP
Now in between these two i used an HTML file to place a frame so that i can use the frame and the code is:
<HTML>
<HEAD>
<TITLE> </TITLE>
<frameset cols="15%,85%">>
<frame name="frame1" src="buttons.html">
<frame name="frame2" src="varifylogin.jsp?emplno=<%=emplno%> &pass=<%=pass%>" >
</frameset>
</HEAD>
<BODY>
</BODY>
</HTML> "DOES ANYONE KNOW WHETHER I CAN USE FRAME IN THE JSP PAGE OR NOT"
and then it should go to VARIFYLOGIN.JSP which is:
String empl_no = request.getParameter("emplno");
   String password=request.getParameter("pass");
   Class.forName( "sun.jdbc.odbc.JdbcOdbcDriver" );
   Connection con = DriverManager.getConnection("jdbc:odbc:finalmp" );
   Statement stmt = con.createStatement();
   ResultSet rs = stmt.executeQuery("SELECT StaffID,FirstName,LastName,Password FROM StaffDetails");...................................................etc.
i am getting this error on the RIGHT hand side frame meaning it showing the buttons on the left but this error on the right:
type Exception report
message
description The server encountered an internal error () that prevented it from fulfilling this request.
exception
org.apache.jasper.JasperException
     org.apache.jasper.servlet.JspServletWrapper.service(JspServletWrapper.java:367)
     org.apache.jasper.servlet.JspServlet.serviceJspFile(JspServlet.java:293)
     org.apache.jasper.servlet.JspServlet.service(JspServlet.java:240)
     javax.servlet.http.HttpServlet.service(HttpServlet.java:856)
root cause
java.lang.NullPointerException
     org.apache.jsp.varifylogin_jsp._jspService(varifylogin_jsp.java:83)
     org.apache.jasper.runtime.HttpJspBase.service(HttpJspBase.java:136)
     javax.servlet.http.HttpServlet.service(HttpServlet.java:856)
     org.apache.jasper.servlet.JspServletWrapper.service(JspServletWrapper.java:320)
     org.apache.jasper.servlet.JspServlet.serviceJspFile(JspServlet.java:293)
     org.apache.jasper.servlet.JspServlet.service(JspServlet.java:240)
     javax.servlet.http.HttpServlet.service(HttpServlet.java:856Can anyone please help me.
Cheers

i am working in jubuilder
and have made there three forms,and
calling s-aots and st_aots in fs_aots
but when i compile
it takes fiel,d text on seprate page display result on other window
why it dosent use frame here
2nd thing
i want to enable scrolling
how i can do
or how can i display required no of records in second row
if i mention page size in any check box
<html>
<head>
<title>
fs_aots
</title>
</head>
<jsp:useBean id="fs_aotsBeanId" scope="session" class="s_aots.fs_aotsBean" />
<jsp:setProperty name="fs_aotsBeanId" property="*" />
<body>
<FRAMESET Rows="30%" Framespacing="0">
<Frame Name ="Header" SRC="s_aots.jsp" Frameborder="0" Scrolling="no">
<FRAMESET Rows="70%" Framespacing="0">
<Frame Name="data" SRC="st_aots.jsp" Frameborder="0" Scrolling="yes">
</frameset>
</frameset>
</BODY>
</html>
<html>
<head>
<title>
s_aots
</title>
</head>
<jsp:useBean id="s_aotsBeanId" scope="session" class="s_aots.s_aotsBean" />
<jsp:setProperty name="s_aotsBeanId" property="*" />
<body>
<p>update database content
<form action="st_aots.jsp" method="post">
Region<input type=text name=Regionparam><br>
Bill Month From :<input type=text name=BmonthFparam><br>
Bill Month To:<input type=text name=BmonthTparam><br>
Connection Type:<input type=text name=Conntypeparam><br>
Exchanges:<input type=text name=Exchparam><br>
Phone No:<input type=text name=PhoneNoparam><br>
<input type=Submit value="Retrive from DB">
</form>
</BODY>
</HTML>
<html>
<head>
<title>
st_aots
</title>
</head>
<jsp:useBean id="st_aotsBeanId" scope="session" class="s_aots.st_aotsBean" />
<jsp:setProperty name="st_aotsBeanId" property="*" />
<%@ page language="java" import="java.util.*"%>
<table border=1 cellpadding=0 cellspacing=0 >
<tr><td> Phone No: </td>
<td> Current Bill: </td>
<td> Net Payable: </td>
<td>Net Arrers:</td>
<td>customer Name:</td>
<td>Customer Address:</td>
<td>Connection Type:</td>
</tr>
<%
Class.forName("sun.jdbc.odbc.JdbcOdbcDriver");
java.sql.Connection connection = java.sql.DriverManager.getConnection("jdbc:odbc:AOTS4");
java.sql.Statement statement = connection.createStatement();
Enumeration parameters = request.getParameterNames();
    if(parameters.hasMoreElements()){
    String REGION = request.getParameter("Regionparam");
    String BILL_MONTH_FROM = request.getParameter("BmonthFparam");
    String BILL_MONTH_TO = request.getParameter("BmonthTparam");
    String CONN_TYPE = request.getParameter("Conntypeparam");
    String EXCHANGES = request.getParameter("Exchparam");
    String PHONE = request.getParameter("PhoneNoparam");
   //String q;
   // statement.executeUpdate("INSERT INTO updatephonebook (LAST,FIRST,PHONE) VALUES ('"+LastValue+"','"+FirstValue+"','"+PhoneValue+"')");
// q= " SELECT PHONE_NO,GROSS_CURRENT_BILL,AMOUNT_PAYABLE,NET_ARRERS_AMOUNT,NAME,ADDRESS_1,ADDRESS_2,ADDRESS_3,ADDRESS_4,CONNECTION_TYPE FROM AOTS WHERE REGION_CODE='" +REGION+ "' AND BILL_PERIOD BETWEEN '" + BILL_MONTH_FROM + "' AND '"+BILL_MONTH_TO+"' AND CONNECTION_TYPE='"+CONN_TYPE+"' AND EXCHANGE_CODE='"+EXCHANGES+"' AND PHONE_NO='"+PHONE+"'";
   // System.out.println(q);
     java.sql.ResultSet columns = statement.executeQuery
    (" SELECT PHONE_NO,GROSS_CURRENT_BILL,AMOUNT_PAYABLE,NET_ARRERS_AMOUNT,NAME,ADDRESS_1,ADDRESS_2,ADDRESS_3,ADDRESS_4,CONNECTION_TYPE FROM AOTS4 WHERE REGION_CODE='" +REGION+ "' AND (BILL_PERIOD BETWEEN '"+BILL_MONTH_FROM+"' AND '"+BILL_MONTH_TO+"') AND CONNECTION_TYPE='"+CONN_TYPE+"' AND EXCHANGE_CODE='"+EXCHANGES+"' AND PHONE_NO='"+PHONE+"' ") ;
    //(" SELECT PHONE_NO,GROSS_CURRENT_BILL,AMOUNT_PAYABLE,NET_ARRERS_AMOUNT,NAME,ADDRESS_1,ADDRESS_2,ADDRESS_3,ADDRESS_4,CONNECTION_TYPE FROM AOTS4 WHERE REGION_CODE='" +REGION+ "' AND CONNECTION_TYPE='"+CONN_TYPE+"' AND EXCHANGE_CODE='"+EXCHANGES+"' AND PHONE_NO='"+PHONE+"' ") ;
     // java.sql.ResultSet columns = statement.executeQuery(q);
   // String sql = ("SELECT BILL_PERIOD,REGION_CODE,EXCHANGE_CODE,PHONE_NO,GROSS_CURRENT_BILL,AMOUNT_PAYABLE,NET_ARRERS_AMOUNT,NAME,ADDRESS_1,ADDRESS_2,ADDRESS_3,ADDRESS_4,CONNECTION_TYPE FROM AOTS WHERE REGION_CODE ='"+REGION+"' AND (BILL_PERIOD BETWEEN '"+BILL_MONTH_FROM+"' AND '"+BILL_MONTH_TO+"') AND CONNECTION_TYPE='"+CONN_TYPE+"' AND EXCHANGE_CODE = '"+EXCHANGES+"' AND PHONE_NO='"+PHONE+"') " );
     //System.out.println("THE SQL QUERY = " + sql);
      //java.sql.ResultSet columns = statement.executeQuery(sql);
                            while(columns.next()){
                            String Phone_No = columns.getString("PHONE_NO");
                            String G_C_Bill = columns.getString("GROSS_CURRENT_BILL");
                            String Amount_Payable= columns.getString("AMOUNT_PAYABLE");
                            String N_A_Amount= columns.getString("NET_ARRERS_AMOUNT");
                            String Name= columns.getString("NAME");
                            String Address1= columns.getString("ADDRESS_1");
                            String Address2= columns.getString("ADDRESS_2");
                            String Address3= columns.getString("ADDRESS_3");
                            String Address4= columns.getString("ADDRESS_4");
                            String C_Type= columns.getString("CONNECTION_TYPE");
%>
                            <TR>
                            <TD> <%=Phone_No %></td>
                            <TD> <%=G_C_Bill %></td>
                            <TD> <%=Amount_Payable%></td>
                            <TD> <%=N_A_Amount %></td>
                            <TD> <%=Name %></td>
                            <TD> <%=Address1 %>,<%=Address2%>,<%=Address3%>,<%=Address4%></td>
                            <TD> <%=C_Type %></td>
                            </tr>
                            <%}
}%>
                            </table>
                            </body>
                            </html>

Drop Frame and Non Drop Frame

Does QuickTime Pro 7 allow you to select between drop frame and non-drop frame?

I don't understand your question.
QuickTime Player will automatically reduce the implied frame rate to maintain the file playing. You can observe this by viewing any HD movie trailer on a non supported OS.
Frame rate drops so much that the file is nearly not viewable yet the audio portion continues to play back without issue.
The QuickTime author can't set these parameters and QuickTime Pro users can override the issue by selecting to "Play All Frames". This can quickly bring playback to its knees on older systems but it will not drop any frame during playback. It may take two days to view each frame of a 1080 HD movie trailer on a G3 but you should see each one.

Show hidden files and folders

Is there a way to show all the hidden files and folders in Finder? Thanks in advance.

Hi, Jon.
The freeware application TinkerTool will permit you to enable or disable the display of hidden or invisible files.
Be careful when working with hidden and invisible files: they are hidden and invisible for a reason!
Good luck!
Dr. Smoke
Author: Troubleshooting Mac® OS X

T3i sensor size vs. full frame and how does that effect lens measurements?

I am new to both photography and the T3i camera. I have been reading Jeff Revell's book "Canon EOS Rebel T3i / 600D: From Snapshots to Great Shots". In chapter two he talks about "Lenses and Focal Lengths". In discussing wide-angle lenses he says
"As for which lenses would be considered wide angle, anything 35mm or smaller could be considered as wide."
Latter he discusses normal lenses and says
"The normal lens for full-frame and 35mm cameras is the 50mm lens, but for the T3i it is more in the neighborhood of a 35mm lens."
I understand that there is a 1 / 1.6 ratio between the T3i and a Full Frame camera. In the first quote does the 35mm refer to the T3i measurement or a full frame measurement?
Is there a standard nomenclature to indicate if you are specifying a "full frame" value verses the T3i value? If so, what is it?
When I look at one of my lenses, say the 18-55mm lens, is this the T3i measurement or the standard full frame?
Thanks in advance for your assistance.
--Jesse
P.S. I could not find a publisher’s forum for this book or I would have asked the question there.

Jesse-T3i wrote:
"As for which lenses would be considered wide angle, anything 35mm or smaller could be considered as wide."
In the first quote does the 35mm refer to the T3i measurement or a full frame measurement?
Is there a standard nomenclature to indicate if you are specifying a "full frame" value verses the T3i value? If so, what is it?
When I look at one of my lenses, say the 18-55mm lens, is this the T3i measurement or the standard full frame?
The fast answers are:
When he mentions the 35mm as the basis for determining what's "wide" he is referring to the APS-C crop-frame size sensor.
There is no nomenclature to indicate if you are "full frame" vs. "crop frame" on a lens because all lenses are reported in true focal lengths. There is a nomenclature to indicate if the lens was designed to only project an image circle onto the sensor which is large enough for "crop frame" ... which is what the "EF-S" lens is. If the lens is for "full frame" (which also works on all crop-frame) then it will have the designation "EF" for most lenses, but Canon also has a few specialty lenses such as the "TS-E" (tilt shift) and "MP-E" (macro photo) lenses which also provide full-frame sensor coverage. Incidentally... this is just Canon's way of tagging a lens... Nikon uses the terms "FX" and "DX" (for full frame and crop frame respectively). Everyone has their own tag. Just remember that focal lengths reported are true (well... there's a TINY bit of round-off allowed) and ignore the sensor size.
Here's the background which may help you understand why this is.
The "normal" focal length is based on the human eye, and to understand it, it's easier to think in terms of "angle of view" rather than "focal length."
If you sit and stare straight ahead without moving your eyes or head to "look around", there is an area of vision that the average person can see (and it does vary), but the "angle of view" for that area is about 40 degrees (horizontally). Of course our vision doesn't present our brain with a nice little rectangular image... it fades and is irregular, but it's generally accepted that the angle of view covers about 40 degrees.
The LENS that provides 40 degree angle of view coverage on a "full frame" camera turns out to be a 50mm lens. Images taken with such a lens will seem neither stretched out nor compressed... they'll seem "normal" to your brain. Also, if you can see an object without having to look around to take in the view, then your camera can "see" it with that lens.
A "full frame" camera is one which has a sensor size which is approximately the same as a single frame of 35mm film. The dimensions are roughly 36mm x 24mm.
There are many different crop frame sizes, but for DSLR cameras, the most popular (by far) is the APS-C size. This means the sensor is roughly the same size as a single frame for the "Advanced Photo System - Classic" film. You can think of this as being roughly 21mm x 14mm (although it varies by a just a few millimeters -- on your camera it's really 22.3 x 14.9mm).
If you were to use a movie projector and movie screen and you projected an image so that it fit perfectly on a 12' x 8' screen and called that "full frame", then a "crop frame" would be derived by shriking the movie screen down to about 8' wide by about 5-1/3' tall but (and here's the key) without doing ANYTHING to the movie projector. Essentially that means you're projecting an image intended to fit ona 12x8' screen... but the real screen is smaller. What happens to the part of the image that doesn't fit on the screen? It just spills off the sides and is lost. That is EXACTLY what happens inside a crop-frame camera.
Canon EOS "EF" lenses are designed to project an image large enough to fill a full-frame sensor ... so when used on a crop-frame camera some of that image just spills off the sides. This means that if your lens was providing a 40 degree angle of view (measured horizontally) then the crop-frame is only capturing the 26 degrees in the middle of it. If you want a 40 degree angle of view again... you'll need to change lenses.
And this is where your author suggests a 35mm lens is "normal" for a camera with an APS-C body. The math actually works out in the neighborhood of a 31mm lens, but nobody actually makes a 31mm lens... and a 35mm focal length (commonly available) is pretty close. Also 28mm lenses are commonly available and are ALSO pretty close. It's my personal opinion that 28mm is probably a bit more normal than 35mm, but that's because as an avid amateur astronomer, I am fairly used to looking through Plossl design eyepieces which provide a 50 degree apparent angle of view and my eye actually can see the edges of the frame, but if I go a bit wider... I can no longer see the edges of the field without "looking around" (regardless... 40 degrees seems to be the established norm and THAT is the value that everything is based on.)
For purposes of buying lenses, the focal lengths are NOT converted or adjusted in any way. For example, Canon makes "EF-S" lenses designed specifically to work with their crop-frame bodies. So when the kit lens that comes with the camera says it is a zoom with an 18-55mm focal length range... it really is 18-55mm regardless of sensor size. (Canon isn't multiplying or dividing focal lengths and putting a different value on the box just because it's intended for a crop-sensor camera.)
Hope this helps.
Regards,
Tim
Tim Campbell
5D II, 5D III, 60Da

My computer was stolen so I deauthorized all computers that had iTunes on them on 10/28/2011. I have a new computer and it was authorized for iTunes. When I checked my account it says I have 2 authorized computers, but this one should be the only one.

My computer was stolen so I deauthorized all computers that had iTunes on them on 10/28/2011. I have a new computer and it was authorized for iTunes. When I checked my account it says I have 2 authorized computers, but this new computer should be the only one. How can I deauthorize whatever the other computer is? I don't want whoever stole my old computer to be able to use my iTunes account.

Get all that music back in itunes and sync again.

I am trying to create a simple animated gif in Photoshop. I've set up my frames and want to use the tween to make the transitions less jerky. When I tween between frame 1 and frame 2 the object in frame two goes out of position, appearing in a different p

I am trying to create a simple animated gif in Photoshop. I've set up my frames and want to use the tween to make the transitions less jerky. When I tween between frame 1 and frame 2 the object in frame two goes out of position, appearing in a different place than where it is on frame 2. Confused!

Hi Melissa - thanks for your interest. Here's the first frame, the second frame and the tween frame. I don't understand why the tween is changing the position of the object in frame 2, was expecting it to just fade from one frame to the next.

How can i remove them from my purchased(no hidden them)and my account for ever?

hello
I got a few free app before and did not download them completely and dont want to do this,
but they stay in my purchased and start automatly when i connect to itunes store and going to crazy me
How can i remove them from my purchased(no hidden them)and my account for ever?
(I want to delete all free apps and Books from my purchases.)
please help me
thank you.

There is no way to do it. Others have asked for the very same thing that you are asking for, but currently it just cannot be done. You can't remover purchases from your Purchase History - you can hide them - but you can't delete them from the history.
You can delete the Apps from the iPad and you can delete them from iTunes on the computer. Delete them from iPad, delete them fromiTunes so that when you sync there is no chance that they will come back. Then hide the purchases. That's the best that you can do.
On the iPad, tap and hold down on the app icons until the X pops up. Tap the X to delete the apps.
In iTunes, clcik on Apps under the Library heading on the left. Right click on the apps that you want to delete and follow the prompts.

After getting a new desktop I downloaded iTunes and authorized my new computer and then de-authorized my old one, When I try to update my 5S it says my phone is not authorized and list my wifes email address as the account holder and not mine. How

After getting a new desktop I downloaded iTunes and authorized my new computer and then de-authorized my old one, When I try to update my 5S it says my phone is not authorized and list my wifes email address as the account holder and not mine. How do I correct this. I am using Windows 8.1 . My wife has never had an iTuunes account

Hello Lakesidetom,
It sounds as though you are experiencing an issue with an Apple ID and authorizations. Based on your post, it sounds like you are familiar with the authorizing and deauthorizing process. The Apple ID in question (your wife's email) may be originating from the iPhone you are attempting to update. Is it possible that your wife created an Apple ID or iCloud account which is signed in on that iPhone? Below, I have included links to some resources that may help you determine if your wife has created an Apple ID:
How to find your Apple ID - Apple Support
Use these steps if you forgot your Apple ID or aren't sure that you have one.
Apple - My Apple ID
If you can't remember your Apple ID, just provide us with some information and we'll find it for you. Then we'll help you reset your password.
Thank you for contributing to Apple Support Communities.
Cheers,
Bobby_D

How do I get Firefox to show hidden files and folders. It should be available under help but help only gets as far as Open Containing folder and doesn't go on to show hidden files and folders

I am trying to find the status of Adobe Flash Player on my computer. I am advised that it exists in Firefox's hidden files and folders but I cannot find such a folder

You have an older version of Flash installed - Shockwave Flash 10.0 r45
You can see that for yourself in Tools > Addons > Plugins
"Show hidden files and folders" is a function of the Operating System, not an application such as Firefox. Windows Control Panel > Folder Options > View - Advanced Settings

EMIEsitelist and EMIEuserlist hidden directories and dat-files

2014-04-05
Cross-posted from
http://answers.microsoft.com/en-us/windows/forum/windows8_1-security/erniesitelist-and-ernieuserlist/00407bd2-e349-423c-a8e5-cb6127840ea5
Original Post dated April 21, 2014
EmieSiteList and EmieUserList
Microsoft Security - Privacy Concerns
I found two unknown directories on my PC in my user profile. I have, so far, been unable to identify what put them there, which process owns them, and when I delete them (using Admin escalated privileges) they come back after a few minutes or immediately
after reboot.
     c:\users\USERNAME\appdata\local\EmieSitelist\container.dat
     c:\users\USERNAME\appdata\local\EmieUserlist\container.dat
     C:\Users\USERNAME\AppData\LocalLow\EmieSiteList\container.dat
     C:\Users\USERNAME\AppData\LocalLow\EmieUserlist\container.dat
It was time, anyway, so I wiped the drive using factory low-level overwriting and performed a clean install of Windows 8.1 Pro using a freshly downloaded ISO from Microsoft; one with an ESD distribution, written to a new just out-of-the-bedamned-hardshell-plastic
flashdrive..
I just completed the clean install, in this sequence:
Boot to flashdrive and let Windows create partitions then install. Reboot. Check AppData; no folders found.
Activate. Check AppData; no folders found.
Run first Update; install everything except Bing Bar and Desktop.    Check AppData; no folders found. Reboot. Check AppData; no folders found.
Add Feature Windows Media Center. Check AppData; no folders found. Reboot. Check AppData; no folders found.
Run Updates a second time. Check AppData; no folders found. Reboot. Check AppData; no folders found.
Remove MS C++ v12 x86 and x64 installed during Update.    Check AppData; no folders found. Reboot. Check AppData; no folders found.
Download from MSDN (http://msdn.microsoft.com/en-us/vstudio/default) Redistributables MS C++ x86 and x64, 2005, 2008, 2010, and 2012.4 versions, and install in sequence. Check AppData
after each install; no folders found. Reboot after each install and check AppData; no folders found.
Run Updates a third time. Response was No Updates Available. Check AppData; no folders found.
Reboot. Check AppData; all four sub-directories are now present.
These sub-directories and dat-files are not, so far, present in the AppData\Roaming directory.
There is nothing except Microsoft Windows 8.1 Pro WMC and the 10 MS C++ packages installed; and MS Silverlight and AMD (videocard) Catalyst Control Center on the machine. Windows Defender is present but is installed as part of Windows 8 and 8.1;
and its' updates are provided via the MS Update process. All - repeat ALL of these items are provided by Microsoft.
My questions are: What are the Emie directories for; what program created them, and what does the various container.dat files "contain"? And . . . if not absolutely necessary, How do I get rid of them and keep them from coming back?
First attempt at Solution:
Permissions are Full for System, USERNAME, and group Administrators. The USERNAME is the Owner, and Effective Permissions for each of the 3 is Full.
Open Command Prompt (Admin)
C:\Windows\system32>cd\
C:\>attrib -r -h +s C:\Users\USERNAME\AppData\Local\EmieSiteList\container.dat
C:\>attrib -r -h +s C:\Users\USERNAME\AppData\Local\EmieSiteList
C:\>attrib -r -h +s C:\Users\USERNAME\AppData\Local\EmieUserList
C:\>attrib -r -h +s C:\Users\USERNAME\AppData\Local\EmieUserList\container.dat
C:\>attrib -r -h +s C:\Users\USERNAME\AppData\LocalLow\EmieUserList\container.dat
C:\>attrib -r -h +s C:\Users\USERNAME\AppData\LocalLow\EmieUserList
C:\>attrib -r -h +s C:\Users\USERNAME\AppData\LocalLow\EmieSiteList
C:\>attrib -r -h +s C:\Users\USERNAME\AppData\LocalLow\EmieSiteList\container.dat
C:\>
BOTH Files and Directories are no longer Hidden. The Directories still show that the files within are READ-Only, but checking the actual file shows that it is no longer R-O.
I then deleted each of the 4 directories and closed Windows (File) Explorer.
After less than 3 minutes reading pages on the internet (at Microsoft's Ask Windows Community), I opened Windows Explorer to check and found that the sub-directories had re-created themselves in both the Local and LocalLow directories.
The container.dat files were back in the Local sub-dir and after another few minutes, also back in the LocalLow sub-dir.
Both the sub-directories and the container.dat files are once again Super-Hidden.
Analysis using Windows utilities and SysInternals and NirSoft tools have not identified which object or process or service owns these objects.
ADDED: My system is a home system, not connected to any work domain via VPN or otherwise. WHY is the Windows Update Team not spending time to implement condition-and-error-checking to ensure that unneeded updates, services, and changes are not made
without the system owner/operator permission? Further, WHY is this particular issue so hard to find info about; what is being kept from customers and why?

Dear sir Shovel Driver,
   About:  EMIEsitelist  and  EMIEuserlist
.., hidden directories and dat-files
Internet Explorer 11 (on Windows 7 and Windows 8.1) provides increased performance, improved security, and support for the modern technologies like HTML5 and CSS3 that power today’s Web sites and services. By adding better backward compatibility with
Enterprise Mode, Internet Explorer 11 now helps customers stay up to date with the latest browser—and facilitates using the latest software, services, and devices.
IE11 Enterprise Mode can be set in the Group Policy Console, or by adding a
Registry setting:
REGISTRY:
Windows Registry Editor Version 5.00
[HKEY_LOCAL_MACHINE\SOFTWARE\Policies\Microsoft\Internet Explorer]
[HKEY_LOCAL_MACHINE\SOFTWARE\Policies\Microsoft\Internet Explorer\Main]
"EnterpriseMode"="Disable"
[HKEY_LOCAL_MACHINE\SOFTWARE\Policies\Microsoft\Internet Explorer\Main\EnterpriseMode]
Or a edit a Group Policy setting, which you can find under:
[Windows-Key]+[R]->[Run]->Type here:
   gpedit.msc
Press [Enter], with an UAC Warning:
Do you want to allow the following program to make changes on this computer:
gpedit.msc ?
Select/Press: Yes
Go to in the Left pane of the GPedti.msc Window:
  Computer Configuration
  Administrative Templates
  Windows Components
  Internet Explorer
Change / Add at right list, down under:
  "Use the Enterprise Mode IE website list"
Set this option to - whatever you need; Disabled,
Enabled (Default is: Not Configured)
When Enabled, you need to add a list with Web-Sites, Domains or Web-Pages.
This policy setting lets you specify where to find the list of websites you want opened using Enterprise Mode IE, instead of Standard mode, because of compatibility issues. Users can't edit this list.
If you enable this policy setting, Internet Explorer downloads the website list from your location
  (HKCU or HKLM\Software\policies\Microsoft\Internet Explorer\Main\EnterpriseMode),
opening all listed websites using Enterprise Mode IE, Web-Sites are seperated by a sign: "
If you disable or don't configure this policy setting, Internet Explorer opens all websites using Standards mode.
Now to
properly close and conclude this
mystery:
EMIEsitelist and EMIEuserlist
.., are hidden directories and dat-files
Thses directories and dat files are used to store data for the IE11
EnterpriseMode.
It is not a: Virus, neither it is a Trojan, Hoax, KeyLogger or anything else bad.
TECHNET Sources:
Turn on Enterprise Mode and Use a Site List (Deploy):
http://technet.microsoft.com/en-us/ie/dn262703.aspx
What is Enterprise Mode?:
http://technet.microsoft.com/library/dn640687.aspx
If you find this usefull, please Vote at the button
"I Find This Usefull"
Thank you! ;)
Best regards, MPVS
MP|VS

How do I stop Windows 7 from searching hidden files and folders

In XP it was simple with the intuitive Advanced Search Options.
Even if you enable "Don't show Hidden Files and Folders" in Windows 7, they still show up in the search menu. A similar post included a suggestion by a support dude to post a question here. I've searched for every possible solution and yet something so simple appears to be non existent. Has Microsoft just lost its mind with omitting this feature? Is this something that will never be solved? Indexed or not, hidden files and folders still appear in Search.
Thanks

what have you setup in Explorer->Organize->Folder & Search Options?
Don't show hidden and Hide: Empty, Protected, etc. all ticked
if you have at some stage indexed all those system folders, and subsquently removed those from the index scope, then you may need to rebuild the index so those results are not presented by searches?
i've assumed that you are getting things like \windows included, and this seems to be typical. perhaps because some common tools like notepad, wordpad etc reside in those folders.
have you checked out the Indexing Options?
from memory, "don't show hidden & system" really only obscures the stuff when you're browsing in explorer. the indexing engine doesn't respect that kind of setting. you'll need to get your indexing scope worked out to affect the search results presented.
I'm not concerned much with indexing, it's just amazing that there is no option to stop "Search" from searching hidden files and folders when "Don't show hidden" is checked - the way it was with XP, etc. As I understand it whether folder is indexed or not, will not stop "SEARCH" from searching them. It was quite simple in XP but in Windows 7 it seems it is impossible.

Hidden Frames and Stokes in author

Similar Messages

Maybe you are looking for