Hide all members' value for specify date from CUBE level

Hi There,<o:p></o:p>
With my current CUBE data available for yesterday, but 2-5 % data also get loaded through ETL for today as it's live data feed and process all data
at CUBE level.<o:p></o:p>
Now problem here till yesterday all data are okay and that make send to end user, but chunk of data for today (2-5 %) don’t make any sense…. now question
here is any way I can hide value for all members for today which is (2-5 %) only, that way data visible from CUBE level only till yesterday.<o:p></o:p>
Exactly what I mean if anyone connect to my CUBE they can only see data till yesterday (day-1), but not for today.<o:p></o:p>
Regards,<o:p></o:p>
Nagen<o:p></o:p>
Thanks, Nagen

Hi,
two possibilities:
1) Create a security implementation, so that the users are allowed to see the data until yesterday. Dimension Security on your Date Dimension)
2) Scope the Dimension Member for future Dates to NULL
Kr Jürgen

Similar Messages

Master Data is missing for Specified Matierials at cube level !!

Hello Experts,
Good Day..!!
I have been facing an issue in my project, Master Data is missing for a KF and values are not displayed in a report for the specified matierial Nos. Where as other matierial nos KF values are displaying.
Intially, i checked from Cube End and found the issue is in Cube level only.
For that in the data flow, i already checked whether the data has been loaded perfectly or not.
Tried to reran the DTP once again and checked the values for the KF in the report and unfortunately KF values are not displaying for specified matierials only.
Kindly advice how can i move further..
Thanks,
SN.

Hi,
Check if SIDs are generated for the infoobject, if not try to do the change run attribute and then load the data to Cube.
Hope this helps...
Rgs,
Ravikanth.

Query to select value for max date from a varchar field containing year and month

I'm having trouble selecting a value from a table that contain a varchar column in YYYY-MM format.
ex.
Emp_id Date Cost
10264 2013-01 5.00
33644 2013-12 84.00
10264 2013-02 12.00
33644 2012-01 680.0
59842 2014-05 57.00
In the sample data above, I would like to be able to select the for each Emp_id by the max date. Ex. For Emp_id 10264, the cost should be 12.00.

create table test (Emp_id int, Date varchar(10), Cost decimal (6,2))
insert into test values(
10264, '2013-01', 5.00 ),
(33644, '2013-12', 84.00 ),
(10264, '2013-02', 12.00 ),
(33644, '2012-01', 680.0 ),
(59842, '2014-05', 57.00 )
Select Emp_id,[Date],Cost FROM (
select *,row_number() Over(Partition by Emp_id Order by Cast([Date]+'-1' as Datetime) Desc) rn
from test)
t
WHERE rn=1
drop table test

What is the difference between methods of deleting data from cube

Hi,
Is there any differences, pros and cons for deleting data from cube by:
1) deleting the specific request loaded into the cube
2) using selective deletion with specific characteristic values
Assumption for the above is both the options will delete the same data set.
Thanks and regards.

Hi BW Beginner,
Yes, of course, there are differences.
Selective Deletion:
PROS: You can use to delete data that satisfies a certain criteria (e.g. some characteristic values).
CONS: I think this locks the whole cube during deletion
Deletion by request id:
PROS: You can easily delete all data that belongs to a certain request id (i.e. you can easily delete a bad load).
CONS: If you have already compressed the cube, you can not use deletion by request id to delete a certain request.
Hope this helps.

How to use for all entires clause while fetching data from archived tables

How to use for all entires clause while fetching data from archived tables using the FM
/PBS/SELECT_INTO_TABLE' .
I need to fetch data from an Archived table for all the entries in an internal table.
Kindly provide some inputs for the same.
thanks n Regards
Ramesh

Hi Ramesh,
I have a query regarding accessing archived data through PBS.
I have archived SAP FI data ( Object FI_DOCUMNT) using SAP standard process through TCODE : SARA.
Now please tell me can I acees this archived data through the PBS add on FM : '/PBS/SELECT_INTO_TABLE'.
Do I need to do something else to access data archived through SAP standard process ot not ? If yes, then please tell me as I am not able to get the data using the above FM.
The call to the above FM is as follows :
CALL FUNCTION '/PBS/SELECT_INTO_TABLE'
EXPORTING
    archiv           = 'CFI'
    OPTION           = ''
    tabname          = 'BKPF'
    SCHL1_NAME       = 'BELNR'
    SCHL1_VON        = belnr-low
    SCHL1_BIS        = belnr-low
    SCHL2_NAME       = 'GJAHR'
    SCHL2_VON        = GJAHR-LOW
    SCHL2_BIS        = GJAHR-LOW
    SCHL3_NAME       = 'BUKRS'
    SCHL3_VON        = bukrs-low
    SCHL3_BIS        = bukrs-low
SCHL4_NAME       =
SCHL4_VON        =
SCHL4_BIS        =
    CLR_ITAB         = 'X'
MAX_ZAHL         =
tables
    i_tabelle        = t_bkpf
SCHL1_IN         =
SCHL2_IN         =
SCHL3_IN         =
SCHL4_IN         =
EXCEPTIONS
   EOF              = 1
   OTHERS           = 2
   OTHERS           = 3
It gives me the following error :
Index for table not supported ! BKPF BELNR.
Please help ASAP.
Thnaks and Regards
Gurpreet Singh

Changing MAXSIZE value for a data file.

Hello, I was wondering if it is possible to change the MAXSIZE value for a data file from UNLIMITED to a specified value, like 4M.
Thank you,
David

This is trhe command that actually did what I wanted:
ALTER DATABASE DATAFILE 'D:\DBDATA\TESTPTIX02.ORA' AUTOEXTEND ON MAXSIZE 3840M;
Thank you all for tour time and help. Have a safe and happ Christmas and new years.
David

Set Default Value for a Date Navigator

Hi all
Is it possible to set a default value for a date navigator.I mean with out picking the date from the Navigator, on load of the view itself i need a particualr date to be displayed (say 12/31/2000).
Thanks in advance

Hi,
create a value attribute of type date bind to the input field and in wdInit()of view controller write this code..
wdContext.currentContextElement().setValueAttrName(new Date(Calendar.getInstance().getTimeInMillis()));
means ...
u r setting the date entered into some context ....
type of that attribute must be of date and for initial value write the above code ..if it is under node element create nodeelement bind it to context and write the code accordingly..
Message was edited by: Yashpal Gupta

Is there any VIEW or FM for pulling data from VBAK, VBAP?also for VBEP,VBBE

Hi Experts,
1) Instaed of using JOINS and FOR ALL ENTRIES, am looking to use any view or FM for pullinmg the data from, VBAK & VBAP,
So, pls let me knwo that, Is there any VIEW or FM for pulling the data from the above of tables
2) Instaed of using JOINS and FOR ALL ENTRIES, am looking to use any view or FM for pullinmg the data from, VBEP & VBBE,
So, pls let me knwo that, Is there any VIEW or FM for pulling the data from the above of tables
3) Am guessing FOR ALL ENTRIES is better than JOINS in PERFORMENCE perspective, Is am I correct?
thanq
Edited by: Srinivas on May 9, 2008 5:36 PM

Hi Srinivas,
You can use the view WB2_V_VBAK_VBAP2 for fetching data from VBAK and VBAP instead of using a JOIN. Note that, in the view, item data fields will have a I following the field name (POSNRI, MATNR_I are the item data fields from VBAP). The master data fields of VBAK are the same.
As far as i know, there are no standard views provided by SAP for VBEP and VBBE. Not sure if FM exists either.
While using FOR ALL ENTRIES clause make sure that you specify the entire primary key (EX. if selecting from VBAP specify VBELN and POSNR) as fields for selection or in the selection criteria. Its much better if you have the primary key in both. This is really important because without specifying the entire key and using FOR ALL ENTRIES will drastically bring down the performance. And also, If you are fetching not more than 100 or 200 entries using the clause it is fine, beyond that its same as using a select statement within LOOP...ENDLOOP.
So, you have to decide whether to use FOR ALL ENTRIES or a JOIN while selecting data depending on the requirement. If you don't have the entire key either in fields for selection or selection criteria, then its better to use a JOIN or VIEW.
The following is an example for using FOR ALL ENTRIES clause effectively.
         Select VBELN
                    POSNR
                    MATNR
            From VBAP
              into Table T_VBAP
          For All Entries in T_DATA
          Where VBELN eq T_DATA-VBELN
              And POSNR eq T_DATA-POSNR.
I hope this helps, Please let me know if you need further assistance.

Abort Could not determine a value for variable 0DAT from the authorizations

Hi All,
I encountered an error '/ Abort Could not determine a value for variable 0DAT from the authorizations\' when executing my query on a multiprovider in BW 3.5.
Can anyone help me in finding a solutionn to this issue.
Thanks,
Kartik.

Hi Kartik,
I am sorry as that note is for NW2004s. Please check if 0DAT variable installed from a business content? if not then I think thats the cause of the problem.
Hope this helps,
Bye...

Good for processing data from a web application?

It seems like all the examples provided for ASA are about processing data streaming in from IoT or mobile apps. Is ASA appropriate for processing data from websites? For example, I have a multi-tenant web API and I need to roll up usage and calculate billing
for my clients. My clients can upload resources with me which I store in blob storage. But blob storage gives me no way of knowing how many resources have been uploaded and how long I have stored them. Would ASA be a good fit for calculating these figures?

I have solved this task in folowing way:
I have add ADF read only form to my page (which I need anyway). The form displays data selected in the graph (using another VO, which is linked to graph VO). Command button calls my managed bean, which handles the data via the bindings executables (view iterators).

Getting an error while activating a planning area "Enter values for planning horizon From and planning horizon To for the storage time profile level"

Dear S&OP community,
I am getting following error while creating a planning ares in a newly installed sandbox. "Enter values for planning horizon From and planning horizon To for the storage time profile level".
This what I did...
1) Created new attributes and master data objects and activated them successfully.
2) Time profile created and activated successfully
3) Trying to create planing area by assigning time profile in step 2 and assigned master data from step1..Unable to save the data and system returns
this error - "Enter values for planning horizon From and planning horizon To for the storage time profile level"
My understanding is time profile needs to be active but doesn't have to have values...
Any help is appreciated.
Thanks,
Krishna

YS,
Here are my time profile settings
Level       Name          Display Horizon - Past Display Horizon - Future
1             Monthly     -6                                       11
2             Quarterly     -2                                       3
3             Yearly        -1                                       2
Time profile is active and but time profile data is not loaded
Thanks,
Krishna

What are Parameters? How are they differenet from Variables? Why can't we use variables for passing data from one sequnece to another? What is the advantage of using Parameters instead of Variables?

Hi All,
I am new to TestStand. Still in the process of learning it.
What are Parameters? How are they differenet from Variables? Why can't we use variables for passing data from one sequnece to another? What is the advantage of using Parameters instead of Variables?
Thanks in advance,
LaVIEWan
Solved!
Go to Solution.

Hi,
Using the Parameters is the correct method to pass data into and out of a sub sequence. You assign your data to be passed into or out of a Sequence when you are in the Edit Sequence Call dialog and in the Sequence Parameter list.
Regards
Ray Farmer

Which CKM is used for moving data from Oracle to delimited file ?

Hi All
Please let me know Which CKM is used for moving data from Oracle to delimited file ?
Also is there need of defining each columns before hand in target datastore. Cant ODI take it from the oracle table itself ?

Addy,
A CKM is a Check KM which is used to validate data and log errors. It is not going to assist you in data movement. You will need an LKM SQL to File append as answered in another thread.
Assuming that you have a one to one mapping, to make things simpler you can duplicate the Oracle based model and create a file based model. This will take all the column definitions from the Oracle based model.
Alternatively, you can also use an ODI tool odiSQLUnload to dump the data to a file
HTH

Lync 2013 Clients prompting repeatedly for credentials for calendar data from outlook

Our Exchange server had crashed recently (nothing major) and a reboot of the CAS server resolved the issues. However since then all our domain computers with Lync 2013 clients are prompting for credentials for calendar data from outlook. We would but in
our domain credentials but it still asks. It would sometime ask once a day or sometimes repeatedly throughout the day.
I have look on the forums and tried fixes that included: editing IIS Autodiscover and ESW to use NTLM first , rebuilt lyncs cache in app data etc and none seems to resolve the issue. Any help would be appreciated.
Note: Our Lync 2013 environment is internal only. Only users on domain computers can access the service. We do use a proxy server here for internet but I do not believe Lync is going through the proxy since its internal to our network only. This is NOT happing
to our users with the Lync 2010 client.

Please update your Lync client with the latest version.
You can check the following KB:
http://support.microsoft.com/kb/2825630/en-us
November 7, 2013 update for Lync 2013 fix the issue Proxy authentication dialog box appears when you sign in to Lync 2013.
Lisa Zheng
TechNet Community Support

Is there any way we can set default value for a Date Attribute to current date in Master Data Services

Is there any way we can set default value for a Date Attribute to current date in Master Data Services.
I as well wants to know that is there any posibility to show Calendar control while input data into respective date attributes.
Thanks.

Hi Anagha,
So far i havent found any way to set todays date by default from MMI, but i guess this flow should work as workaroud
1. Add buisness rule which can set a default value when Date = NULL/Blank
2.get the entity table ,use -select EntityTable from mdm.tblEntity where Name = '<enter entity name>'
3.Go to that table and add a after update trigger like
if uda_<entityid>_<attributeid(Date attribute)> = default value
update uda_<entityid>_<attributeid(Date attribute)> =getdate() where id = <LastUpdatedRow>
I will check on this too from my side.
By the way AFAIK i dont think so calendar control integration is possible .

Hide all members' value for specify date from CUBE level

Similar Messages

Maybe you are looking for