Hide Best Bid column in LAC of Bidder's view
Hi all,
We're currently using SRM 3.0 (EBP 4.0 and LAC 1.0). We have a
requirement to hide Best Bid column in LAC of Bidder's view. Would you
please help us to solve this problem.
Thanks & regards,
echo
Hello,
I'm afraid if You want to change it the only way is to decompile srmlaInitiator.jar and srmlaRespondent.jar and comment this column in AuctionItemsPanel.class
Regards,
Marcin Gajewski
Similar Messages
-
Hide/show a column in a report
Hi,
I'm actually looking for a solution to hide/show a column in a report (matrix form)in function of a parameter..
Using the conditionnal formating propertie to hide a column (return false) works, but the colmuns in the right side don't move.. It's not very pretty..
An other way could be to change the elasticity property of a column, and replace the data by "", but apparently, we can't access to this property by the srw command.
I really need a solution, else I'll have to produce as many reports as I've to hide columns...
Thanks a lot
Best regards..
DAvid
nullHi,
I use 'decode' in sql statement. If your sql statement is applicable to this,you may use it. So you can choose which columns you want to use and also you can concatanate columns to make them one column. -
Bidding Engine and LAC documentation
Hi All,
Can anyone let me know what would be the best way to obtain comprehensive documentation on bidding engine and LAC to crate RFXs.
I would appreciate it if someone could email me some good documentation.
Thanks
sunnyDear Sunny,
Pls. go thru following link.
Bidding Engine :
http://help.sap.com/saphelp_srm50/helpdata/en/67/c3833cfa3dbc2ce10000000a114027/frameset.htm
LAC :
http://help.sap.com/saphelp_srm50/helpdata/en/56/c34e3c59bfe747e10000000a11402f/frameset.htm
How to initiate Live auction...
Pls. revert in case any specific query.
Regards,
Sanjay -
How to Hide a entire column in a Table Control?
Can we hide an entire column in a Table control? Plz give some hints in doing the same...
Here is a sample, if you wish to do it programattically. If you used the table control wizard, then you should have a module which is listed in the flow logic PBO of the screen. Its probably commented out.
itabcon_change_col_attr
Uncomment it and create the module. Then put the code that I have in the module below into your module.
report zrich_0003 .
*&spwizard: declaration of tablecontrol 'ITABCON' itself
controls: itabcon type tableview using screen 0100.
data: begin of itab occurs 0,
fld1 type c,
fld2 type c,
end of itab.
start-of-selection.
call screen 100.
*& Module STATUS_0100 OUTPUT
* text
module status_0100 output.
* SET PF-STATUS 'xxxxxxxx'.
* SET TITLEBAR 'xxx'.
endmodule.
*& Module ITABCON_change_col_attr OUTPUT
* text
module itabcon_change_col_attr output.
<b> data: wa like line of itabcon-cols.
loop at itabcon-cols into wa.
if wa-screen-name = 'ITAB-FLD2'.
wa-invisible = '1'.
modify itabcon-cols from wa.
endif.
endloop.</b>
endmodule.
Regards,
Rich Heilman -
Hi,
I'm trying to create a link column in a table by declaring one column as link type and set its linkColumnKey to another column which contains the actual text of the http URL. I'd like to hide the second column in the table. How do I do that? One of the posts I found said that I can set the column type to USER and an empty title, then the column won't be displayed since I don't have a renderer. However, the column still gets displayed.
Any help would be appreciated.
Thanks,
JennyTry this
this.model.getColumn("col1").setType(TableColumnType.LINK);
this.model.getColumn("col1").setLinkClickTarget("_blank"); //to open in new win
this.model.getColumn("col1 Opportunities").setLinkColumnKey("col2"); -
Hide a DataGrid Column in a State?
In one state, I want to show all columns. In a second state,
I want to hide a few columns and made the grid smaller.
I have:
<mx:State name="detail">
<mx:AddChild relativeTo="{hbox1}"
position="lastChild">
<ns:DetailPanel id="detailPanel" />
</mx:AddChild>
<mx:SetProperty target="{listPanel}" name="width"
value="450"/>
</mx:State>
</mx:states>
I know how to hide a column in
Actionscript, but I thought it would be more convenient to
make it part of the state.The reason I was thinking States-only is that I am now
switching state, and trying to hide these 2 columns via
Actionscript and the column widths are getting messed up when the
states switch (on the columns not getting hidden).
Some columns suddenly get way narrower when the panel gets
wider -- the opposite of what I'd expect -- and get narrower that
their set widths. -
OBIEE - How to selectively hide or disable columns on a dashboard prompt?
Hello! I need some help with OBIEE dashboard Prompts. Any help will be highly appreciated!
Question 1. How to selectively hide or disable columns on a dashboard prompt or the entire prompt? There seems to be no "hide" or "dsable" options on
prompts.
Question 2. How to synchronize 2 different prompts on the same dashboard?
The application is this: There are total of 2 tabs on a dashboard ("tab_1" and "tab_2"). Each tab uses different prompts ("pr_1" and "pr_2"), having just one first drop down column in common ("Product_id").
The desired functionality is this: user selects "Product_id" on the first tab's prompt, which filters its reports (on "Go") and also propagates to the second tab. When user clicks on the second tab, the reports there are already filtered (or begin filtering) by "product_id", selected on the first tab.
Question 3. How to prevent the reports from retrieving when switching to a different tab on a dshboard? Specifying dummy default values in the prompt does
not seem to preven reports from retrieving, which still takes time.
Thank you very much!
RogerRegarding Question 2:
What you need to have is a Dashboard scope dashboard prompt for Product_ID (i.e., Don't use the column prompt from the prompt tab within the Request.)
1) Create the dashboard prompt, put it on tab1 and save the prompt to a presentation variable, say prmtProdID. Set the scope to "dashboard." (This is the default, by the way.) If you create a dashboard prompt and set the scope to "dashboard," then the prompt values selected will hold true across dashboard pages.
2) On tab2, go to your report and in Criteria mode, apply a filter to the Product_ID column making it equal to the PV. (Click the filter icon, Add>Variable>Presentation Variable and type prmtProdID. Save.)
When the user selects a Product_ID on tab1 of your dashboard and hits "Go," not only will it filter your report on tab1, when you go to tab2 the report here will be filtered with the same value selected in the prompt on tab2.
Regarding Question 3:
If you implement 2, you cannot implement 3. You can't have it both ways. Not for the same scenario. But if you want to know how to do it in general, read this:
http://obieeone.com/2009/08/24/how-to-stop-queries-to-automatically-fire-off-once-entering-dashboarddashboard-page/ -
How to hide a data column in a planning Layout
Hi experts,
we use BW-BPS and I need some datacolums in planning layout, which should be calculated.
Rest Volume = Forecast - Actual
The customer wants to see only the "Rest Volume".
But i need for calculation Forecast and Actual values, which are available in Infocube.
Do you know how to hide some colums in planning layout ?
thanks a lot.Write a one line macro in SAPAfterDataPut sub module and check the option in the tab MS Excel Settings in the last screen of the layout.
Sample macro:
suppose the column you want to hide is 4.
columns(4).hidden = true -
How to Hide/show the columns data while doing Drill down or drill up
Hi ,
How to Hide/show the columns data while doing Drill down or drill up in webi report .
Does it possible BO 3.1 version ?
Please suggest me on this.
Thanks & Regards
VenkatWhile that is not there yet, you can make use of the show when empty yes/no in combination with alerters.
So I have an alerter applied to every cell of the table.
When a condition is true (say I drilled down) I just put = "" in every cell, emptying the table,
because its now empty and doesn't need to show, it wont.
For the detail table I use the opposite, so when you drilled down it becomes visible...
Hope this helps all that do not have 40 yet
Good luck,
Marianne -
How to hide/suppress empty columns in pivot tables
In a pivot table, is there any way to do something like "suppress missing data" to make an entire column hidden only if it is empty? I have a situation where I can't hide an entire measure because the measure has values for another dimension, but I would like to hide the column that is empty. See the example below. I would like to hide the combination of Dim1 and Measure 2, and the combination of Dim 2 and Measure 3. I can't hide all columns with Dim1 and/or Dim2, or Measure2 and/or Measure3. Is there any way to hide just the column with the empty combination? Thanks.
Dim1 Measure1 Always populated
Dim2 Measure1 Always populated
Dim1 Measure2 Always null
Dim2 Measure2 Always populated
Dim1 Measure3 Always populated
Dim2 Measure3 Always nullBhawna -
That made a difference, but it still needs some work. The IfNull() function picked up every value in the columns that I wanted to hide and changed them to zero. The conditional formatting that you suggested hid the content in those columns from the HTML. However, there ended up being several issues:
1) IfNull() picked up other null values that happened to be in the resultset, so the conditional formatting was applied to more than intended. I could correct that by changing the data value in the physical database columns for the entire pivot table columns that I want hidden, but then I have to work around having bogus values in those intersections. Still, that is a possible workaround.
2) The column headers for the columns that I want to disappear did not go away. When I applied CSS display:none, it shifts the pivot table cells to the left, so a lot of the data ends up under the wrong column headings.
3) CSS display:none only hides the content from screen readers. When I view the pivot table on the dashboard and print it to a PDF, the data in the columns that I want to disappear are back.
That still seems like it's a long ways from "suppress missing data" for the entire column. Thanks for your suggestion.
Daniel -
Bid invitation not available to bidder.
Hello all,
I have created Bid invitation w.r.t. SC in sourcing cockpit, But when the bid is published to bidder ( Business partner & role maintained for the same) is not getting transfered to bidder.
No could you please explain the cause and the possible trouble shooting for this problem. Also explain where i can monitor these transactions?
thanx
vivek.
SRM 4.0 Classic with ECC6 backend.Hi Claudia,
I have created the contact person for bidder through the web only. There shouldnt be any problem in creating BP or contact person as the bid invitation was sent to bidder sucessfully, even i could create contract in backend after the bids receieved from the same bidder.only some times this error is flashed. ( all atributes, master data used is one and the same).
Now could u please tell me how exactly the bid invitaion is sent to bidder. any FM, prog??? which i should check out??
About creating bidder, I have created the bidder after replicating that vendor from backend. Then for the bidder i have created employee as a contact person through web ( Manage business partner) with bidder role assigned.
thanx please.
Regards,
Vivek -
Mask RFx item information in Bidder's view
Hello.
In our SRM5.0 environment, we are able to modify HTML templates to "mask" (not hide) some item information in bidder's view of the Bid Invitation. For example, if the item's UoM is "USD", we would not show the actual quantity, but change the display of quantity to 1 and UoM to "Task", to the bidder. We process this type of item as such because the quantity value is actually storing our budget which needs to be concealed from the bidders.
However, in our SRM 7.0 environment, I have difficulty in finding the best way to handle the same requirement. The data on the UI is rendered by context binding. I wonder if somehow enhancing the business object data retrieval is the best approach, or there is possibility for configuration. More importantly, I would like to know if any of you have faced similar requirement before (typically indicated by UoM = USD) and what solution you had, either technically or from business process point of view.
Thanks.Hello Yang,
The quick solution which I can give right away is to introduce 2 custom fields at the item level. Based on the UoM field value, we will disable the 2 standard SAP fields and enable the newly introduced custom fields.
This can be done either enhancing the meta data code in the method UNIT of the class /SAPSRM/CL_PDO_DYN_MDF_IT_QTE or defining custom meta data attributes for these two SAP Standard fields
And same approach for the new custom fields.
Hope this might solve the problem quickly and not modifying any standard SAP Code.
Best Regards,
Mani -
2 column definitions for a single table view
Hi Experts,
I have a requirement in which i need 2 column definitions for a single table view.
The requirement is :
..............Week1........... |....................Week2...............
01/01/2007 | 02/01/2007 | 15/01/2007 | 16/01/2007 | 17/01/2007
data.......... | data.......... | data.......... | data.......... | data..........
data.......... | data.......... | data.......... | data.......... | data..........
data.......... | data.......... | data.......... | data.......... | data..........
the weeks shud be displayed for the corresponing dates below......
Is it possible to have 2 column definitions
Please help me out.
Thanks in advanceHi Balaiji,
proceed as follows:
Create a structure in the dictionary called ZSTRU_USR02_F
with field1 type int4
field3 type int4
field3 type int4
Create a table type in the dictionary:
zusr02 line type ZSTRU_USR02_F.
Create a structure in the dictionary:
ZSTRU_USR02
with tab1 type zusr02
and tab2 type zusr02
Create a table type in the dictionary:
zttusr02 line type ZSTRU_USR02
Create a controller (table.do) in a BSP-application
Add the controller class to this controller.
Add a attribute (table) instance public type zttusr02
redefine method do_request, add the following coding:
FIELD-SYMBOLS: <fs_tab> LIKE LINE OF table,
<fs_row> TYPE zstru_usr02_f.
DATA: lirv_view TYPE REF TO if_bsp_page,
lv_int TYPE i.
* Dispatch Input for event handling
dispatch_input( ).
* Navigation requested during Event handling?
IF is_navigation_requested( ) IS NOT INITIAL.
RETURN.
ENDIF.
* get some data into the table.
INSERT INITIAL LINE INTO TABLE table ASSIGNING <fs_tab>.
DO 3 TIMES.
INSERT INITIAL LINE INTO TABLE <fs_tab>-tab1 ASSIGNING <fs_row>.
ADD 1 TO lv_int.
<fs_row>-field1 = lv_int.
ADD 1 TO lv_int.
<fs_row>-field2 = lv_int.
ADD 1 TO lv_int.
<fs_row>-field3 = lv_int.
ENDDO.
DO 3 TIMES.
INSERT INITIAL LINE INTO TABLE <fs_tab>-tab2 ASSIGNING <fs_row>.
ADD 1 TO lv_int.
<fs_row>-field1 = lv_int.
ADD 1 TO lv_int.
<fs_row>-field2 = lv_int.
ADD 1 TO lv_int.
<fs_row>-field3 = lv_int.
ENDDO.
* Create the view
lirv_view ?= create_view( view_name = 'table.htm' ).
* Hand over the data
lirv_view->set_attribute( name = 'table' value = table ).
* Call the view
call_view( lirv_view ).
Create a view called table.htm. Add your controller class as controller class for the view and add the attribute table type zttusr02.
Add the following to the layout:
<%@page language="abap"%>
<%@extension name="htmlb" prefix="htmlb"%>
<htmlb:content design="design2003">
<htmlb:page title = " ">
<htmlb:form>
<htmlb:tableView id = "tableToDisplay"
table = "<%=table%>"
emptyTableText = "No Data"
iterator = "<%=controller%>"
footerVisible = "FALSE"
encode = "TRUE"
width = "100%"/>
</htmlb:form>
</htmlb:page>
</htmlb:content>
Go back to your controller class. Add the interface IF_HTMLB_TABLEVIEW_ITERATOR
Implement the method IF_HTMLB_TABLEVIEW_ITERATOR~GET_COLUMN_DEFINITIONS
DATA: lwa_column LIKE LINE OF p_column_definitions.
* Column 1
CLEAR lwa_column.
lwa_column-columnname = 'TAB1'.
lwa_column-title = 'Column 1'.
lwa_column-tooltipheader = 'Tooltip Column 1'.
lwa_column-width = '50%'.
lwa_column-wrapping = 'FALSE'.
lwa_column-horizontalalignment = 'LEFT'.
lwa_column-verticalalignment = 'MIDDLE'.
APPEND lwa_column TO p_column_definitions.
* Column 1
CLEAR lwa_column.
lwa_column-columnname = 'TAB2'.
lwa_column-title = 'Column 2'.
lwa_column-tooltipheader = 'Tooltip Column 2'.
lwa_column-width = '50%'.
lwa_column-wrapping = 'FALSE'.
lwa_column-horizontalalignment = 'LEFT'.
lwa_column-verticalalignment = 'MIDDLE'.
APPEND lwa_column TO p_column_definitions.
Implement the method IF_HTMLB_TABLEVIEW_ITERATOR~RENDER_CELL_START and add:
DATA: lr_tview TYPE REF TO cl_htmlb_tableview.
FIELD-SYMBOLS: <fs_row> LIKE LINE OF table.
ASSIGN p_row_data_ref->* TO <fs_row>.
CASE p_column_key.
WHEN 'TAB1'.
CREATE OBJECT lr_tview.
lr_tview->id = p_cell_id.
GET REFERENCE OF <fs_row>-tab1 INTO lr_tview->table.
lr_tview->footervisible = ''.
lr_tview->width = '100%'.
p_replacement_bee = lr_tview.
WHEN 'TAB2'.
CREATE OBJECT lr_tview.
lr_tview->id = p_cell_id.
GET REFERENCE OF <fs_row>-tab2 INTO lr_tview->table.
lr_tview->footervisible = ''.
lr_tview->width = '100%'.
p_replacement_bee = lr_tview.
ENDCASE.
With this you get a table in a table. Now if you create a second iterator you'll be able to adjust the apperance of the inner table, as well as you can add column headers.
Hope that helps.
Best Regards
Michael -
Adding columns to result list in inbox view of web client
Hi,
I have a requirement to display custom columns in result list of inbox view of web client. I copied the view and controller to custom name space. In BSP_WD_WORKBENCH , for AUIITEM view, there are two context nodes . AUIITEMTREE is one of thena and has tree structure and under it tree node proxy. Tree node proxy has attributes, I can not add more attributes to Tree node proxy in work bench. Would you please any one suggest the approach to solve this problem.
Thanks in advance.
With regards,
Ravi KumarHi Ravi,
Have u got solution for ur problem.I have got same requirement.
As per my requirement I need to search for Sold To Party for all category and display it in AUIITEM.
Please provide with some inputs .
Regards,
Vikas -
Can I customize the standard columns for the search results (list view) specifically?
When searching for emails I would like to adjust the columns in the search results list view, e.g. add the sender's address. This I would like to save as standard columns specifically for the search results list view, since in other contexts I do not need it. However, I can only set standard columns for existing folders, not for the context of "search results".
re :When searching for emails
what method are you using?
Are you talking about 'Quick filter' or 'Global Search' or via 'Edit' > 'Find' > 'Search Messages' ?
'''If you used the Global Search:'''
Typed in a word: eg: Birthday and selected 'Messages mentioning birthday'
Then a search is returned in a new tab.
You click on 'open email as list' - to open in a new tab.
Is this the search results list view that you are refering to?
the default columns should be:
From, Subject, Date, Location
If you only want to see eg: From and Date
click on the icon 'select columns to display' located to far right of header column name.
deselect Subject and Location
next time you run a global search then only those columns appear in the 'open email as list' view.
'''If via 'Edit' > 'Find' > 'Search Messages' ?'''
enter search parameters and click on 'Search'
Is this the search results list view that you are refering to?
the default columns should be:
From, Subject, Date, Location
Subject and Location cannot be edited.
Other column headers can be selected in the same way using the far right 'Select columns to display' icon.
Any column headers you select will not be remembered if you close and later peform another search.
If you click on 'Save as Search folder'
This will create a folder in your Folder Pane and you can select column(s) you wish to display.
Any Column headers you choose to display are selected for that saved search folder.
The column headers only change if you select to reset defaults on that folder or from another folder you select to apply to other folders for either the search folder or all folders in the account.
'''If using Quick Filter:'''
The QuickFilter type of search is done on the folder that is selected.
You are still in the same folder, it has simply ''filtered'' what it is displaying, so it will obviously still display the same column headers.
Maybe you are looking for
-
Wondering if anyone has ever had the following problems and how to resolve them. e-mail app wont open, just crashes instantly, imessages and texts wont send or receive, pictures wont delete and are showing up all fuzzy, when i take a picture it show
-
In iTunes 11, how do I open a playlist in a new window? Every previous version included this option.
-
How to check whethere apps patch need downtime or not?
hi, i am going to apply in Oracle 11i.how to that patch need down time or not? Plz help Thanks in advance
-
Excel 2007 ignores the roles configured on SSAS 2008
Hi, I am facing a common problem for which I have found very useful threads but they didn't manage to help me. My problem is on excel report, Dimension data is not filtering correctly when I connect with user credentials for which a role is configure
-
Is there a way to hide sheets from view in the sheets pane?
I cannot seem to figure out how to hide sheets in a file. I converted my monthly budget and forecast file from excel but I do not want to see all the history from previous months (which were arranged in tabs in an excel work book). Thanks in advance.