Hide field of the dynamic line for some conditions
Hello,
I have a dynamic table filled like that :
material | qty | unit | button
123455 | 489 | PC |
987654 | 376 | PC |
765432 | 534 | PC |
On the last column I have a button. When I click on it, I would like to show 2 more fields but only for the line where I clicked the field.
material | qty | unit | button
123455 | 489 | PC |
987654 | 376 | PC |__X__ | here | here |
765432 | 534 | PC |
I think that I can define my table with 6 columns, hide the header of the last 2 ones, but I can't find any instruction to hide and make visible only fields of the line.
Could you help me ?
thanks
I wrote this in the click method but I get an error :
var cnt = data.form.TABLE.line.instanceManager.count;
cnt = cnt; //zero-based index
for ( var i = 0; i < cnt; i++) {
if ( i == this.parent.index )
if ( data.form.TABLE.line.BUTTON == "X" )
data.form.TABLE.line(i).new_field = "visible" ;
else{
data.form.TABLE.line(i).new_field = "invisible"
Similar Messages
-
Fields update in "Schedule Lines for FRC sched." in a scheduling agreement
May I know how the following fields in the "Schedule Lines for FRC sched." section in a scheduling agreement are being updated?
We have already a new inbound delivery with goods receipt (last June 1, 2010) but the following fields still show the previous inbound delivery details:
For example:
Date of last del. 08.10.2009
Last d. note no. 91011
Last GR 21.10.2009
Last GR qty. 54.500
I wish I can show some screenshots here.
Thanks a lot in advance for your answers.Hi Sravan,
As per my view point, this is standard SAP behaviour. System will generate PR only in case of external operation.
If you go to OPL8 (Order type dependent parameters) for your respective order type & plant combination you have option of maintaining setting related to PR only and there is no option of using scheduling agreement or generating schedule lines.
I don't see any possibility to use scheduling agreement using to have schedule lines for external operation.
Regards,
Tejas -
How to know the dynamic values for this :AND category_id_query IN (1, :3, )
Hi Team,
R12 Instance :
Oracle Installed Base Agent User Responsibility --> Item Instances -->
Item Instance: Item Instances > View : Item Instance : xxxxx> Contracts : Item Instance : xxxxx> Service Contract: xxxxx>
In the above page there are two table regions.
Notes.
-------------------------------------Table Region---------------------------
Attachments
-------------------------------------Table Region---------------------------
--the attachments are shown using the query from the fnd_lobs and fnd_docs etc...
I want to know what are the document types are displayed in this page ?
--We developed a custom program to attach the attachments to the services contracts and the above seeded OAF page displays those ..as needed.
But after recent changes..the Attachments--> table region is not showing the attachments.
I have verified the query..and could not find any clue in that..
but i need some help if you guys can provide..
SELECT *
FROM
*(SELECT d.DOCUMENT_ID,*
d.DATATYPE_ID,
d.DATATYPE_NAME,
d.DESCRIPTION,
DECODE(d.FILE_NAME, NULL,
*(SELECT message_text*
FROM fnd_new_messages
WHERE message_name = 'FND_UNDEFINED'
AND application_id = 0
AND language_code = userenv('LANG')
*), d.FILE_NAME)FileName,*
d.MEDIA_ID,
d.CATEGORY_ID,
d.DM_NODE,
d.DM_FOLDER_PATH,
d.DM_TYPE,
d.DM_DOCUMENT_ID,
d.DM_VERSION_NUMBER,
ad.ATTACHED_DOCUMENT_ID,
ad.ENTITY_NAME,
ad.PK1_VALUE,
ad.PK2_VALUE,
ad.PK3_VALUE,
ad.PK4_VALUE,
ad.PK5_VALUE,
d.usage_type,
d.security_type,
d.security_id,
ad.category_id attachment_catgeory_id,
ad.status,
d.storage_type,
d.image_type,
d.START_DATE_ACTIVE,
d.END_DATE_ACTIVE,
d.REQUEST_ID,
d.PROGRAM_APPLICATION_ID,
d.PROGRAM_ID,
d.category_description,
d.publish_flag,
DECODE(ad.category_id, NULL, d.category_id, ad.category_id) category_id_query,
d.URL,
d.TITLE
FROM FND_DOCUMENTS_VL d,
FND_ATTACHED_DOCUMENTS ad
WHERE d.DOCUMENT_ID = ad.DOCUMENT_ID
*) QRSLT*
WHERE ((entity_name ='OKC_K_HEADERS_V'-- :1
AND pk1_value IN ( 600144,599046) --:2
AND category_id_query IN (1, :3, :4, :5, :6, :7) )
AND datatype_id IN (6,2,1,5)
AND (SECURITY_TYPE =4
OR PUBLISH_FLAG ='Y')))
--='000180931' -- 'ADP118'
The above seeded query is the one which is used for table region to retrieve the data..
how to know the dynamic values for this : AND category_id_query IN (1, :3, :4, :5, :6, :7) )
--SridharHi Patricia,
is it working for restricted key figure and calculated key figure ??
Note Number Fisc Period Opening Days
1 1 2
2 1 3
3 1 0
because I have other restriction, so I create two restricted key figure..
RK1 with restriction : Total Number of Note,
RK2 with restriction : Total Opening Days ,
then I Created a calculated key figure, average opening days in a period
CK1 = RK2 / RK1..
in this case, I am not sure if it will work or not..
for example, during RK2 calclation, it might be this 2+3 = 5, the line with 0 will be ignored..
during RK1 calcualtion, it might be 1 + 1 + 1 = 3. ---> Not sure in this case, the line with opening days 0 will be calculated or not..
could you please confirm.. -
How to place two text fields on the same line in adobe
I am trying to create a form on adobe and I would like to have two unique text fields on the same line. Is this posible?
If you are using FormsCentral it is, the fields can be placed "side by side" in a row. There is a "+" sign on the right side of the field that brings up a toolbar to add a field adjacent. You can also right click on a field and select "Insert beside", or you can "drag and drop" fields next to one another or to a new row.
Thanks,
Josh
PS - One note, if you are using the "desktop" application of FormsCentral that comes with Acroat Pro XI make sure the application is up to date by either using the "Help" - "Check for updates" menu item or by signing into the application so that you have the latest features including the side by side layout. -
How to dynamically add/remove a button from the ribbon based on some condition? (Ribbon XML)
Hi,
I have a ribbon (done using ribbon XML) with menu options. I need to remove few buttons from the menu dynamically based on some condition. Also, I want to change the label of another button. How to achieve this programmatically? (C#)
Thanks in advance.
Thanks PrasadHello Prasad,
Use callbacks for populating Ribbon controls such as menu, dropDown, gallery and etc. Then you can use the
Invalidate or
InvalidateControl methods of the
IRibbonUI interface to get your callbacks invoked when required. Thus, you will be able to delete the required item(s).
You will find the following articles in MSDN helpful:
Chapter 11: Creating Dynamic Ribbon Customizations (1 of 2)
Chapter 11: Creating Dynamic Ribbon Customizations (2 of 2)
To change the label of your controls at runtime you need to use the getLabel callback and call the Invalidate or InvalidateControl methods of the IRibbonUI interface. The following series of articles describe the Fluent UI in depth:
Customizing the 2007 Office Fluent Ribbon for Developers (Part 1 of 3)
Customizing the 2007 Office Fluent Ribbon for Developers (Part 2 of 3)
Customizing the 2007 Office Fluent Ribbon for Developers (Part 3 of 3) -
The dynamic selection for profit center in FBL1N isn't working
Dear all,
I have one one issue regarding FBL1N.
The dynamic selection for profit center in FBL1N isn't working.
If we enter profit center, we don't get any value.
As per developer after debugging, table BSIK is not getting updated, hence values are not updating in the report.
Please let me know, any configuration is missing.
BR,
ShailendraTry BSEG and see if its there for the particular doc. If its not there its a functional issue, you have to capture profit center at the time of entry. You can either make the profit center field mandatory or substitute it at the time of document generation. Consult your FI consultant. If u have activated New GL features the profit center may me in table FAGLFLEXA. but i don't think u can get the profit center from this table for your purpose, you may need to develop a zreport.
And its not BISK its BSIK
Edited by: Harisankar S on May 4, 2010 3:05 PM -
Field on the EFW2 file for the Federal w-2's, 941-ss box on the W-3SS form
HI,
This is regarding the layout of the file W-3SS with the check box on the top showing 941-SS. When we did the W-2's and W-3 for the Virgin Islands employee's manually, this wouldn't be a problem. But since 2006 when we filed the MMREF electronically, we are looking for the field which would do the same think as checking this 941-ss box on the W-3SS form.
Is there anything on SAP which tells us what field to populate for 941-SS
Basically we need to populate the field on the EFW2 file for the Federal w-2's which will indicate to the Government that this file corresponds to 941-SS, which previously we would have checked that box on the manual W-3.
Please help me with this as this is very imp......
Thanks in advance.
GracyHi Ervin,
Check in SE71 form <b>HR_F_W2_AUDIT</b> for the value in box 12 for benefits. You will see that this value comes from various any Tax groups like T184 to T195. There are also other groups, please check that also.
I checked for one empployee, the value displayed was "D Deferals to 401K" in box 12b which is tax field T027 & tax form group W23D in form HR_F_W2. When you check the WT assigned to this group I see 3070(Catch Up Contribution) & 3100(401K EE Pre Tax).
Similarly you can check for one employee & check the value for box 12b. You should get it.
So what I think is we are checking correct configuration for the WT attached to that tax form group. Only thing is that we need to check the correct Tax form field.
What exactly you want to change? I think before changing check some SAP notes for the change.
Hope this helps.
All the best!!!
Thanks,
Sarika. -
Two fields on the same line in sreen programming
Hi All,
I need to create a selection screen which would have two fields (their texts and their irespective input fields) in the same line, on the screen.
I was able to achieve this by using code--
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 1(31) text-a04.
PARAMETERS: sch_begd LIKE qppnp-begda.
SELECTION-SCREEN COMMENT 52(22) text-a05.
PARAMETERS: sch_endd LIKE qppnp-endda.
SELECTION-SCREEN END OF LINE.
This could allign the fields - start date (text-a04) and end date (text-a05) in the same line along with their input fields.
But I am facing two issues with this code-
1. I am not able to get the underline same as we get when we create selection screen using 'select-options' and 'parameters'.
2. This is causing accessibility issues, as the field text and the input field are no more linked (since I am using text element to display the field text, like for start date), it cannot find the text to be read for the input field and hence the checkman errors.
Please suggest how to achieve the same.
Thanks and Regards,
Arpita.Hi Arpita,
Are you trying to have select-option field in your screen in dialog programming?
If yes than you can use the following approach else ignore this.
Create one screen (100) and create subscreen area on this screen and call this subscreen in PAI and PBO of screen
Using call subscreen check F1 help for calling subscreen in PAI and PBO.
Now you should create your selection screen on the subscreen use selection screen begin of screen (100) option of defining
selection screen and then add your selection options here.
Regards,
Pawan -
Duplicate content of region fields in the region and keep some fields
duplicate content of region fields in the region and keep some fields displayed in this region and some not.
Our customer wants to duplicate the content of the region fields and 3 fields of this region (one of them is the key from the table ) have to be shown empty and have to be recreated when he does the next commit. The other 25 fields have to be filled with the content before. (I have to do a commit before I show the region again without these three fields)
What I did:
When I have a botton with request CHANGE then APEX does the change without emptying the fields. I tried to make processes on this request which should empty my three fields, but the processes never fire (I see it in the debug and I don't know why, I putted them on every process point for testing)
The second try:
On my button with request CHANGE , I filled the 'set these items ' with my three fields and the 'with these items' with 2 commas ,, to set these items null.
I do no claer cache, but APEX empties the hole region.
Can you help me??
Thanks UtaHi Uta,
OK - This is what I did:
1 - Page 15
On the EMPNO column, I have a link to page 18. I set P18_EMPNO to #EMPNO#. I assume that you already have this functionality to link from the report page to the form page. There are no changes required to this page.
2 - Page 18
I have created a hidden field called "P18_EMPNO_COPY". There are no special settings for this item - I've just put it at the bottom of the region containing all of the other items
I have created a button called "P18_COPY". This has a Conditional Display set with a Condition Type of Value of Item in Expression 1 IS NOT NULL and Expression 1 of P18_EMPNO. This has an Option URL Redirect set for it with the following settings:
Target is a - Page
Page - 18
Set These Items - P18_EMPNO,P18_EMPNO_COPY
With These Values - ,&P18_EMPNO.
I have created a Process to run "On Load - After Header". The PL/SQL code for this is:
DECLARE
emp_rec EMP%ROWTYPE;
BEGIN
SELECT * INTO emp_rec FROM EMP WHERE EMPNO = :P18_EMPNO_COPY;
:P18_EMPNO := NULL;
:P18_JOB := emp_rec.JOB;
:P18_MGR := emp_rec.MGR;
:P18_SAL := emp_rec.SAL;
:P18_DEPTNO := emp_rec.DEPTNO;
END;
This has a Conditional Processing Condition Type of "Value of Item in Expression 1 is NOT NULL" and Expression 1 shows P18_EMPNO_COPY
Finally, for each field, I have added in a Default Value that points to itself (For example, the P18_JOB field has a Default Value of :P18_JOB) with a Default Value Type of PL/SQL Expression.
Obviously you will need to replace the field and item names with those for your table and form.
This process does the following:
1 - The user clicks the link in the report on page 15. P18_EMPNO gets populated with the EMPNO value of the item select.
2 - Page 18 is loaded with the data relating to the record with the ID found in P18_EMPNO
3 - The Copy button is displayed only if P18_EMPNO contains a value
4 - The user clicks the Copy button
5 - The P18_EMPNO value is copied into P18_EMPNO_COPY and P18_EMPNO is blanked out
6 - The page is submitted with these changes. When it reloads, the new process kicks in
7 - This process will:
(A) Create a variable based on the record structure for the EMP table
(B) Fill this variable with the data in the table for the ID that's now in P18_EMPNO_COPY
(C) Set the session state values for the fields that need to be repopulated with the data now retrieved into the variable
(D) Clear the P18_EMPNO session state value
8 - When the page starts to load the form, it will see that there is no P18_EMPNO value and, therefore, will not bring in any information from the table. However, as we have now set the Default Value settings for each field, this will force it to retrieve the values we've stored using the new process and display these values in the form.
I think I've detailed everything - if this doesn't work, please let me know!
Regards
Andy -
Why am I seeing REPLY_SUBJECT_PREFIX before the subject line of some of my emails?
Lately, on my iPhone 5, I've been seeing REPLY_SUBJECT_PREFIX before the subject line of some (but not all) of my emails.
Also, when I go into Mailboxes/Accounts, and select an email account, instead of seeing:
INBOX
SENT
DRAFTS
etc.
I'm seeing:
INBOX_SPECIAL_MAILBOX
SENT_MESSAGES_SPECIAL_MAILBOX
DRAFTS_SPECIAL_MAILBOX
Has this happened to anyone else? Anyone know how I can get things back to "normal"?
Thanks.Well, I'm still not sure why it happened, but if you're reading this and you've got a similar problem, the thing to do is to reset the iPhone (hold home button and power button (the one at the top) down at the same time for several seconds). That seems to have fixed the problem.
-
Tracking number field in the Default settings for items section
I need to add the tracking number field in the Default settings for items section in the shopping cart creation transaction.
Could you please tell me inw hich structure should I add the custom field ?
thanks,
Rita.Hi Atul,
I added the code of tracking number in in the html template saplbbp_mon_sc 1200 with reference to the code of purchase org field.
This added a field in the shopping cart report selection screen but without any description.
I will further learn html code and try to bring in the description and then try to handle this field in the badi bbp_mon_sc after_selection_screen and after_selection method.
Is this approach ok?
<!-- purchase org. -->
`TR()`
`TD(class="label", nowrap="X")`<label for="GS_ITEM-PURCHASE_ORG"> `T_PURCHASE_ORG.label`</label>
`TD(class="label", align = "right", nowrap="X")` <label for="GS_ITEM-PURCHASE_ORG"> </label>
`TD(class="data", nowrap="X")` <input type="text" id="GS_ITEM-PURCHASE_ORG" name="GS_ITEM-PURCHASE_ORG" value="`GS_ITEM-PURCHASE_ORG`" maxlength="14" size="14">
`F4HelpButton(bbpformname, "GS_ITEM-PURCHASE_ORG", jsMaskString(strEnc(#SELECT_TEXT_SHELP_PUR_ORG)), jsMaskString(strEnc(#SELECT_SHELP_PUR_ORG)))`
`TR()` `Lines(colspan2="2")`
<!-- tracking no (added) -->
`TR()`
`TD(class="label", nowrap="X")`<label for="GS_ITEM-ZZBE_TRACKING_NO"> `T_TRACKING_NO.label`</label>
`TD(class="label", align = "right", nowrap="X")` <label for="GS_ITEM-ZZBE_TRACKING_NO"> </label>
`TD(class="data", nowrap="X")` <input type="text" id="GS_ITEM-ZZBE_TRACKING_NO" name="GS_ITEM-ZZBE_TRACKING_NO" value="`GS_ITEM-ZZBE_TRACKING_NO`" maxlength="14" size="14">
`F4HelpButton(bbpformname, "GS_ITEM-ZZBE_TRACKING_NO", jsMaskString(strEnc(#SELECT_TEXT_SHELP_PUR_ORG)), jsMaskString(strEnc(#SELECT_SHELP_PUR_ORG)))`
`TR()` `Lines(colspan2="2")` -
Went through this step-by-step, but alas it did not solve the problem. For some reason I can download mail on my Macbook Pro and iPhone, but no my iMac. Connection Doctor shows all green lights. This started today when I was prompted to re-enter incoming mail server passwords. I re-entered passowrds yet again to make sure they were correct. Rebuilt the inBox. Connection Doctor continues to show all green lights, but am still unable to download mail to the inbox. Has anyone else ever run into this problem?
I have the exact same problem trying to use the Remote app on both my iPhone 3gs and iPad 2 with either my Mac or ATV2. My Remote app used to work on my phone - I can't recall if I ever actually used it with my iPad, but when I tried today, I got all the same results as you did (on both iPad, and then iPhone). I was using my ATV2 to play music from iTunes on my Mac and wanted to use the Remote app, but it would not connect to either device no matter what I did.
-
<blockquote>Locked by Moderator as a duplicate/re-post.
Please continue the discussion in this thread: [tiki-view_forum_thread.php?comments_parentId=702631&forumId=1]
Thanks - c</blockquote>
== Issue
==
I have a problem with my bookmarks, cookies, history or settings
== Description
==
How can I get the default value of a particular preference in FireFox?.
I know I can see the default value for some of the preferences in about:config but, I need a programatic way to get the default value.
I see some that there are values for preferences in firefox.cs but I am not certain that these are being used as the default values for preferences. prefs.js in user's profile only has the updated values and not the default values.
Any help towards acheiving this programtically is greatly appreciated.
If the default values are stored in a file, kindly let me know the format in which it is stored for me to parse it programatically.
== User Agent
==
Mozilla/4.0 (compatible; MSIE 8.0; Windows NT 6.1; Win64; x64; Trident/4.0; .NET CLR 2.0.50727; SLCC2; .NET CLR 3.5.30729; .NET CLR 3.0.30729; Media Center PC 6.0)Dear Friend,
Here when you have the callableSattement as ?=proc(?), the first ? is an output parameter. So you should register it as out parameter using registeroutparameter.
Then you can get the value from the outparameter using callablestatement.getXXX().
Try that way.
For free tral versions of JDBC Drivers go to www.Atinav.com -
I just noticed that I can no longer select photos out of my finder that are located in my Aperture/Iphoto Library. I used to be able to attach photos to my gmail out of the aperture library in the finder and for some reason, no longer can.
I can't access these images except to go into the applications.
Also, I'd like to import my iphoto library into aperture, and move aperture library to an external drive. I tried the import first, but there wasn't enough space. Then I tried copying over the aperture library onto the external drive but it failed bc it said file was in use.
As it is, I only have 50gb left on my imac, and the aperture library is 150gb. Also, I have over 10k images in both libraries combined and there are tons of duplicates that need to be sorted, and hopefully not messed up because I've organized most of them.
So in short, I need to know how to do the following:
-select photos in finder in aperture/iphoto libraries
-move aperture library to live on external drive
-import iphoto library into aperture library
-eliminate dups but maintain organization
-moving forward i need a better workflow so that I import images from camera, and can organize right away into albums rather than creating projects by default and then creating albums so essentially the photos are in 2 different places, even tho they are referenced
-live happily ever after
Thanks in advance for any support you can offer!!If you're using apps like iPhoto or Aperture then they replace the Finder for managing your photos. The point is that you use the (many) options available via these apps for the things you want and need to do with the Photos.
So, simply, you don't select the photos in the Finder. I'll append the supported ways to do this - which are faster and will yield the current version of your Photos - to the end of this post.
-move aperture library to live on external drive
Managed or Referenced Library? Managed -
Make sure the drive is formatted Mac OS Extended (Journaled)
1. Quit Aperture
2. Copy the Library from your Pictures Folder to the External Disk.
3. Hold down the option (or alt) key while launching Aperture. From the resulting menu select 'Choose Library' and navigate to the new location. From that point on this will be the default location of your library.
4. Test the library and when you're sure all is well, trash the one on your internal HD to free up space.
Referenced - relocate your Masters first.
These issues are covered in the Manual and on this forum hundreds of times.
-import iphoto library into aperture library
FIle -> Import -> iPhoto Library? Have you done this already? If so are you trying to move the Masters to Aperture from an iPhoto Library? Or Consolidate them?
-moving forward i need a better workflow so that I import images from camera, and can organize right away into albums rather than creating projects by default and then creating albums so essentially the photos are in 2 different places, even tho they are referenced
You can't. Every photo is in a Project. They’re the basic building blocks of the Library.
You might want to spend a little time with the manual or the video tutorials. I'm not sure you've grasped the app you've purchased.
The following is written for iPhoto, but about 97% works for Aperture too.
There are many, many ways to access your files in iPhoto/ APerture: You can use any Open / Attach / Browse dialogue. On the left there's a Media heading, your pics can be accessed there. Command-Click for selecting multiple pics. This is what you use to attach your shot to your GMail
(Note the above illustration is not a Finder Window. It's the dialogue you get when you go File -> Open)
You can access the Library from the New Message Window in Mail:
There's a similar option in Outlook and many, many other apps. If you use Apple's Mail, Entourage, AOL or Eudora you can email from within iPhoto/ Aperture.
If you use a Cocoa-based Browser such as Safari, you can drag the pics from the iPhoto Window to the Attach window in the browser.
If you want to access the files with iPhoto/ Aperture not running:
For users of 10.6 and later: You can download a free Services component from MacOSXAutomation which will give you access to the Library from your Services Menu.
Using the Services Preference Pane you can even create a keyboard shortcut for it.
or use this free utility Karelia iMedia Browser -
I just bought a new printer for my iMac version 10.7 Lion but I am able to install the software but for some reason I am not able to view the printer under system preferences to add the printer. It is connected with the USB cord!! It as if the printer does not show up in the add printer section under system prefernces!!
I checked the manufacturer and apple site to see if my printer is supprted and it said it was!! I am using the HP officedeskjet 4500 G510a-f (HP Officejet 4500 Desktop)!! Still does not show up under add printers please help!!
Maybe you are looking for
-
hi, i have mac 13" laptop, which i am trying to put 500 gb hdd. plese i need some suggestion, which way to do. i need 100 GB for mac, then by using bootcamp i want to install windows xp, for that i need 200gb, and the remaining 200gb i want to format
-
Airplay works on I-tunes but not on sites where you might want to stream, such as U-tube. It does not appear on my display menu settings, but as i-tunes as the icon I am thinking the computer must have the capability. Can anyone help, how to I turn a
-
How to convert an output retrieved from database to an excel sheet?
Hello friends, I am preparing an online JSP based project for our training and placement department. In this context, I am showing an output into a JTable format to the user for the shortlisted candidates by retrieving this information from my databa
-
How to take a screenshot on an iPad 1
I would like to be able to take a few screen shots from my old iPad 1, but can't find the magical command to do it....
-
Once again, CTRL+F filtering isn't working.I'm using Windows 7 and Spotify 1.0.8.59.gee82e7e6.I guess it's SO SO HARD to program such advanced feature...