Hide Tablix after it renders?

I have a report that I am calculating rows of a tablix in code so then I can display just a textbox of the final results of the code. Since SSRS calculates from the top down I need to display the tablix for the code to calculate the total but then I don't
want to display the tablix when the report finally renders in report viewer.
I have tried multiple ways to do this and haven't found the exact solution.
If I hide the tablix the calculation returns 0. I can minimize the table to the smaller value possible and this works great in preview mode in BIDS. But when rendered at the report view level the tablix appears.
Any suggestions are greatly appreciated to accomplish the rendering of a tablix but then hide it at the report viewer level.
Thanks!

Hi tstalder,
After testing the issue in my local environment, I can reproduce it. When we use custom code to get the calculation in a hidden tablix, the textbox which get data from the calculation will show 0. This is by design. Based on my research and test, I couldn’t
find a way to fix this issue in Reporting Services.
If possible, I suggest that we can use expression to get the calculation in the hidden tablix, then use ReportItems!Textbox.Value to get the value in the textbox.
Thank you for your understanding.
Regards,
Katherine Xiong
Katherine Xiong
TechNet Community Support

Similar Messages

Why am I unable to delete the default track (which seems to act as the master, right?) after making a rough mix? Is it possible to delete the default track after having rendered a mix?

Why am I unable to delete the default track (which seems to act as the master, right?) after making a rough mix? Is it possible to delete the default track after having rendered a mix? I did a rough mix and now cannot change the song as the tracks that were a part of the rough mix seem to remain in the song even though I mute the tracks for a new mix. For instance, I played and recorded a different bass line. Muted the original, but when trying to create the new mix I can hear the original bass line even though I have muted that track. It seems to remain in the previous master (default) track. Please send help. Thank you.

Before answering your question, you have to make sure you understand the difference between the different track types in GarageBand.
Tracks, you record your music on
There are three types of those Tracks.
MIDI Tracks (aka Software Instrument Tracks)
Audio Tracks (aka Real Instrument Tracks)
Drummer Track (only one per Project)
Global Tracks
These are the Tracks that can be shown/hidden at the top of the Tracks Area for specific purposes.
Arrangement Track
Movie Track
Transposition Track
Tempo Track
Master Track
This Track can also be shown/hidden in the Tracks Area. Please note, you cannot delete that Track, only hide it, similar to the Global Tracks
Regarding the Tracks you record your music on, you can delete any of those. It doesn't matter if you created them or there are part of a Template (maybe that is what you refer to as the default track). Once you delete the last Track, the "New Track Window" will pop up to add a new track.
I will explain all that in much more detail in my manual "GarageBand X - How it Works".
Hope that helps
Edgar Rothermich
http://DingDingMusic.com/Manuals/
'I may receive some form of compensation, financial or otherwise, from my recommendation or link.'

OAMessageRadioButtonBean: Selected value is changed after partial rendering

Hi,
I am having a 2 radio buttons in group and depending on the radio button selected, fields are displayed. I am handing this using the partial page rendering. After partial rendering, the correct required fields are displayed but the last radio button in group is always shown selected. This happens even if I have selected the first radio button.
Can you pls help me on this.
Thanks,
Amit

Hi Srini,
Thanks for your help!! It is working now. Earlier I was setting the value of the required RadioButton in processRequest as setSelected(true). It started working fine when I also set the value for non selected Radio button as setSelected(false).
Both the Radio Buttons were required to be set.
Thanks!!

Premiere Pro CS6: why is the crop effect altered after being rendered?

So here's what's happening...
I'm editing a project for work and I'm supposed to apply a widescreen (2.35:1) ratio to the main video; however, when I use the crop effect everything looks correct in my browser window. After being rendered the crop effect has been altered and no longer appears the same.

The Adobe forum for Premiere is found here:
http://forums.adobe.com/community/premiere
good luck,
x

After Effects Rendering error (-1610153464)

I'm trying to render and export a short sequence that I created solely in Adobe After Effects CC. I immediately get the response: After Effects error: Rendering error while writing to file.... An output module failed. The file may be damaged or corrupted. (-1610153464). Not using any external plug ins, tried exporting to desktop and external hard drive. AE version 12.2.1.5, Mac OS X version 10.9.2, Quicktime version 10.3. I realise other people have posted this error before but I'm not using external plug ins, any advice appreciated.

Start here: http://adobe.ly/Uc4dtH

Dock won't hide/show after Tiger security update

I installed the Dec 27 Tiger security update last night (via SW update) and now the dock is behaving badly. I had it set to automatically show/hide, but it would not show anymore after the update. I always install sec updates, so I did also do the previous one without any problems.
So far I've done this to try to solve the problem:
- I changed the settings to turn hiding off and the doc appears and works correctly in that mode. The only problem with it seems to be that it won't show after it hides with hiding turned on.
- I repaired permissions
- I shut down and restarted
- I did a safe-mode restart and a regular restart
- I trashed my doc preferences, restarted, and recreated the configuration of items I like.
- I tried removing the preference called /Library/Preferences/com.apple.dockfixup.plist which had no effect, so I put it back. (It's dated 2006 but I have no further info about it.)
Also, oddly, it seems that my system menus are strictly pull-down now. I am almost sure they had some drop-down behavior before, because I keep clicking on main menu items expecting the submenu to persist, and it doesn't. If I'm not imagining this, perhaps the two issues are related?
I don't have any system mods or Finder replacement apps.
Are there any other dock-related files that I could replace from my backup to try to fix this issue?
Did the update do something specifically to change the dock?
I really hate to reinstall and reupdate from scratch to fix such a minor problem, but it is 100% annoying. Ideas and commiseration welcome.

Thank you. I didn't know you could remove the whole folder without wreaking havoc. I will try another user account for thoroughness.
New info:
I discovered this morning that both of these problems do not occur with my Contour mouse, only with the Logitech trackball. The trackball has a brand new problem at startup today, which is that it acts like it's constantly right-button-down. It selects only.
So perhaps its a driver or mouse hardware issue. I think it's suspicious that it started immediately after the update, but since the trackball did not come with a driver, I am not sure I can further troubleshoot it myself. I'll dig around in the system and on the net a bit to see, but I'm probably going to buy another pointing device in order to resolve this. The trackball is only about 2 months old, but maybe it's filled up with cat hair. ... There's a joke in there somewhere.

Computer specs for nice 3D rendering/ after effects rendering and video rendering in general ?

Hi there! I would like to know what the perfect specs for a laptop/workstation/computer are, so that I could do my creative work from home..my old laptop (Macbook Pro, 8Gb Ram, V 2010) is not good enough for 3D rendering, not even Video rendering or After Effects... I need to know what graphics card for eg or how much Ram or what I need to look for in a computer so that I won't get any error messages after rendering for half a day anymore...;) (--> very annoying) Money is not a first priority...i would first like to know, what the best option would be that one could have and then down size from there;)
I would appreciate every help:) my laptop is dying...i need something new and better;)
cheers stephs

Regardless of workflow, you want a workstation, not a laptop. You will get much more bang for your buck.
Also, as others have said, Windows machines tend to be better choices than Macs right now. And that's coming from two people who used to use/love Macs...
In general, you want the fastest clock speed on your processor that you can afford. You want as many cores as you can get with that nice, high clock speed.
Ideally, you want 4GB of RAM per core of your processor - MINIMUM 16 GB of RAM, (but get as much as you can afford).
You want an SSD for your cache and a good-sized regular hard drive to hold footage, renders, etc.
GPU matters for Premiere and any third-party plugins that use it (like Red Giant Universe, Element 3d, Mettle's ShapeShifter, etc.), but not for AE and not for Cinema 4D (which comes free with AE these days).
Again, this is just some generalization. For more specific info, we'll need to know more about what you're doing.
Also, you don't need to take our word for any of this; read what Adobe has to say on the matter: FAQ: What computer and components should I buy?

Why after effects renders me with bad audio?

I rendered almost six times and the result of these renders is that audio takes me wrong, when I play it in Windows media audio don´t reproduce, and I reproduced a file alternative to this and reproduced it excellent, the worst is that when I play in VLC or Media Player the audio is ok, that's not the main problem, because for me it would reproduce any of the programs that it works, but I need to make this video with less size or weight and when I make this process finally the audio it´s completely damaged. This has never happened before. Please help me.

I'm not quite sure what you're saying. Are you saying that when you render from After Effects the audio sounds bad but the audio file that was in your composition doesn't sound that bad when you play it in other applications?
You aren't telling us what your original audio file is like or what your render settings are in After Effects, so we do not have a lot of information that we might need.
Is the sound okay when you do a RAM preview in AE?
What is the file format of the audio file?
What settings are you using to render out of AE?
If your original audio is an MP3 file, try transcoding it to a WAV and using that in AE. Then render an uncompressed file out of AE and use the Adobe Media Encoder to do your final delivery file. That's the proper workflow anyway. AE should not be used to make your final compressed version.

After Effects Rendering Problem (Please Help!)

Hello, I recently purchased adobe after effects CS6 for my Asus i7 laptop running windows 8 OS with a nvidia graphics card. I had just finished my after effects project and I went to render it out. I chose all my settings as H.264 and best settings. I click render and it starts off fast and rendering fine. About half way through the render it stops adruptly but does not signify any error message on the screen. The software shows that it is still trying to render but the render load bar does not move neither does the time lapse (time remaining).
If you have any idea what the problem may be or how to fix it please post a comment.
Thank You!

We need to know a lot more if we're going to help you. Please provide answers to the questions listed here: "FAQ: What information should I provide when asking a question on this forum?"
> Renders stopping halfway through has usually nothing to do with the output format, so for the time being let's ignore the theoretical hubub about H.264
If the format being used is H.264 in a QuickTime container, this can be a problem, since that codec does have problems with the use of many threads, and these problems often occur partway through processing. There is more information about this here.

Help need to understand After Effects Rendering

Hi There
I have just built my first editing pc.
I want to do Editing in Premiere and AE.
I understand it is best to share the load over 3 drives, and so i have
C: SSD - OS/programs
H: 1 TB HDD - media
F: 500GB EXternal Hard drive - renders
in premiere pro i have made it so i read of the media of H: and render to F:
BUT in after effects i am having trouble understand all this disk cache and confirmed media cache business.
I want to have my renders/previews go onto F: as i dont want my SSD to full up!
what i want to know is where do i allocate the disk cache, confirmed media cache, and the data base stuff.
or does after effects delete renders itsself afterwards.
if anyone could help or give me a simple answer as to what these disk cache and media cache things are in AE that would be amazing
Also when i hit space bar to play in AE it goes green for a few seconds then it leaves the bar behind blue!
dont understand
would appriciate any hep

Thank for for all your help.
So tell me if im now right.
When working in AE, I should:
1.Import media that is on its own drive (in this case H:)
2. Have my disk cache set on the SSD (C:) and maybe put it at a limit of 5-10 gb if I dont want it to take up much room.
3. Not worry about ram previews taking up space as they only occupy my 8gb of ram temporarily, whilst im working in AE.
4. Export/Render to My other drive (F:) when done.
Has my understanding improved?... or am I still being a wally.
Regards

Poor quality after timeline rendering of after effects dynamic link comp.

One of my typical workflows involves dynamic linking AE comps into Premiere- Often I can playback the timeline in Premiere without rendering and achieve great results with no dropped frames. This scenario is ideal since I need to play out sequences in premiere passing them through a Matrox MXO2 LE box to capture them on another system. However, I have noticed recently that if I need to render the Premiere sequences before playback because the dynamically linked AE comps are more complicated, I lose quite a bit of quality after rendering.I've searched around and read about different quality settings in both AE and PP and I can't seem to find any settings that affect this process. Pause and playback quality are both set to full, tried checking rendered maximum depth/quality in the sequence settings and I still can't get this right. I am perplexed since I would think that results would be better post-render.
Dynamic Linked Clip Unrendered
Dynamic Linked Clip Rendered:
-A note about my settings:
AE comps:
720x480 (containing downscaled HD video)
PAR: D1/DV NTSC (.91)
29.97fps
Resolution full 720x480 1.3 MB per 8bpc frame
PP Sequences:
720x480 (.9091)
29.97p
WINDOWS 7 - Adobe CC
Intel Xeon(R) 12 cores 2.40ghz
Nvidia Quadro 4000
12g RAM

The video preview settings were set to DV NTSC. I'm not sure why I didn't think to look at those settings. I went ahead and downloaded the Ut Video Codec Suite and things are now looking great - just like they do when I do not render the sequences. I am noticing now that my HD sequences usually are setup to use Matrox's Mpeg2 I frames only codec.
Is the lossless codec choice always the best/most efficent choice to be used for the preview codec? I assume if I was not dynamic linking I should match this codec with the codec of the files in my sequence, is this correct?

After Effects rendering with Format MXF OP1a 1080i/25, XDCAM with colour space "HDTV (Rec. 709) 16-235" but after rendering the colour space is "30-217"

Hello!
I have a very annoying problem in After Effects. I'm making an Animation with the format "MXF OP1A, Codec XDCAMHD 50 PAL (4:2:2)" with 8-Bit and with the colour space "HDTV (Rec. 709) 16-235" but after rendering the colour space is not 16-235, it is 30-217 RGB. After I activate the colour space in After Effects, then it shows the right values, but after rendering the value for white is 217 and for black is 30. Hopefully someone can help me. Thanks in advance.
Bye

Thanks for your answer, but i don't know an Adobe Media Composer, you surely mean Adobe Media Encoder, or not? Anyway i do not find the option for colour space in Media Encoder, so i would be very thankful if you could tell me where to find it.

After Effects Rendered Color Correct Not Showing In Premiere

Hello all,
I have recently made a short film with a few effects in Premiere and After effects CS4. I have used the Dynamic Link to accomplish this. I have added color correction with Color Finesse in After effects. The problem is I some of the color correction is not showing up in Premiere once it has finished. Some of them are adjustment layers and some are not and the ones that are showing up are diverse like that as well. I have rendered the footage and rendered the premiere time line, it fixes it at first but won't build a DVD the right way then the fixes just seem to disappear when scrolling through the timeline.
Is anyone else haveing this problem?
Do you think it's something wrong that an update will fix?
Maybe a new codec?

Mylenium is correct, the LE version of Color Finesse included with CS4 is for use in After Effects only. To use Color Finesse inside of Premiere or AME you'll need to upgrade to the full PI version. You can find information on available upgrade paths at http://www.synthetic-ap.com/cfupgrade
And if anyone has the PI version and the color correction is disappearing when rendered by AME, be sure to update to the latest version of Color Finesse. Version 2.1.10 corrected an issue that would cause that symptom.

After Effects Rendering REALLLY Slow!?

So, i have a two minute clip, thats taking 3 Hours and 20 mins to download?! Heres some information that may help you help me out... :
Today, everythings just going really slow, i have no idea why. I have cleared my Cache and everything...I don't know what to do anymore.
Installed RAM: 7.82 GB
Current RAM Usage: 5.55 GB
Allowed RAM Usage: 6.32 GB
Process ID
Application Name
Min Needed Memory
Max Usable Memory
Max Allowed Memory
Current Memory
Current Priority
672
After Effects
0.40
7.82
6.32
5.55
1 - High

Y'know, for the past few days you've been crying and moaning about slow render times.
I went back & checked, and do you know how much information you've given to help us help you? Here's the answer: ALMOST NOTHING! And that is despite people asking you over and over again for certain information, and you ignore it! Do you LIKE not getting help?
You know what we know? You're running Win 8 and you have 8 gigs of RAM. You're rendering a 3-minute clip, and it's taking 10 hours. Well, lah-dee-dah. In AE terms, you might just as well have told us you're from Japan and you have red hair.
You want to know what we should know? Here's a list that will get the diagnostic process going:
The PRECISE version of AE you're using, right down to the last decimal place
The PRECISE version of your operating system, right down to the last decimal place
The identities of any third-part video cards
Got any drivers for these cards? What are their PRECISE version numbers?
The horizontal & vertical dimensions of your comps and frame rate
The media container (.mov, .avi, etc.) and codec(s) of the clips you're using
Got audio clips? wav, aiff, or something else?
What kind of still images are in the project? Bitmapped or vector? What are their horizontal & vertical dimensions? Are they RGB or CMYK?
What kind of effects are you trying to use?
Trying to use ray-tracing? You shouldn't.
Trying to use multiprocessing? You shouldn't.
This isn't an all-encompassing list, but it ain't bad. So toss the people here a bone and cough up some information, okay? Give us a fighting chance, and don't make us rely on crystal balls.

After Effects Rendering Problem and RAM Preview Problem

I posted a question about this yesterday but I thought I would repost it with more detail!
I have a restless issue here with rendering and RAM preview. I am simply trying to create a viral ad which uses the cloning effect I achieved with masking for my college coursework and I have completed the process of creation but I have ran into problems. The RAM preview will only play up to a certain point then it will just stop and this effects the final render because it gets to the point in the rendering where the RAM preview stops and then a message will pop up saying the rendering has failed or something? (Screenshots Below)
I have tried RAM previewing just one of the three videos I am using and it still stops at the same point.
I am using .avi files and have tried converting to .mov, .mp4, .wmv all of which didn't work.
I am using After Effects CS4 ver 9.0.0.346
My computer specs
AMD SEMPRON processor 2.7Ghz (single core)
2GB RAM (I know its not alot ;))
ATI Radeon HD 5600 512mb
Creative audigy 2 sound card
Windows XP Serivice Pack 3
It's quite urgent and I hope someone can help!
Cheers!

With just 2GB of RAM, I'm impressed that you can generate that much of a RAM preview. RAM previews use RAM. When they run out, they stop.
Have you tried rendering the clip using the Render Queue. If so, does it also report an error at a similar point? If it renders correctly from the queue, you're done. If it doesn't, you probably have a corrupt source file.

Hide Tablix after it renders?

Similar Messages

Maybe you are looking for