After Effects rendering with Format MXF OP1a 1080i/25, XDCAM with colour space "HDTV (Rec. 709) 16-235" but after rendering the colour space is "30-217"
Hello!
I have a very annoying problem in After Effects. I'm making an Animation with the format "MXF OP1A, Codec XDCAMHD 50 PAL (4:2:2)" with 8-Bit and with the colour space "HDTV (Rec. 709) 16-235" but after rendering the colour space is not 16-235, it is 30-217 RGB. After I activate the colour space in After Effects, then it shows the right values, but after rendering the value for white is 217 and for black is 30. Hopefully someone can help me. Thanks in advance.
Bye
Thanks for your answer, but i don't know an Adobe Media Composer, you surely mean Adobe Media Encoder, or not? Anyway i do not find the option for colour space in Media Encoder, so i would be very thankful if you could tell me where to find it.
Similar Messages
-
After Effects CS 5.5 MXF OP1a Audio Levels Problem
Hallo Forum,
Ich habe ein Problem, das mir großen Ärger bereitet hat. Ich habe einen 20sek TV-Spot in After Effects angelegt, welcher nach den aktuellen Broadcast Richtlinien (RTL Group) ausgespielt werden musste. Hier kurz die technischen Spezifikationen für den Upload:
[...]Als Wrapper- bzw. Containerformat wird ausschließlich ein MXF-Container mit dem
Kodierungsalgorithmus XDCAM HD 422 akzeptiert, wobei das Operational Pattern
1a (OP1a) verwendet werden muss. Die vom Quellsystem generierte MXF Datei
muss der SMPTE RDD09-2009 entsprechen.[...] Der Ton muss mit einer Auflösung von 24 Bit in mindestens zwei diskreten
Tonspuren vorliegen. [...] Die Aussteuerung der Tonsignale muss so erfolgen, dass eine Programmlautheit
(Target Level) von -23 LUFS (+/- 1 LU) erreicht wird.
Ein Preset für dieses Format ist in After Effects vorhanden (MXF - XDCam 50Mbits). Der Ton wurde von einem Tonstudio auf die verlangten -23 LUFS gepegelt. Ich habe das Audiofile (aiff) ohne weitere Anpassung unter die Compostion gelegt und mit dem Preset gerendert.
Problem: Ich bekam folgende Rückmeldung von der technischen Abnahme: "Der Lautheitspegel des Audiosignals liegt außerhalb des zulässigen Wertes. ( -23LUFS)! Festgestellt wurden -17,4 LUFS."
Ich kontrollierte draufhin die Lautstärke des Audiofiles und des ausgespielten TV-Spots (habe sogar extra nochmal im Tonstudio nachgefragt ob der Fehler nicht bei ihnen lag), und siehe da, die ausgespielte Sequenz war lauter als das ursprüngliche gepegelte Audiofile. Nach mehrmaliger Kontrolle ob ich nicht doch versehentlich den Pegel verändert habe, musste ich feststellen, dass das Problem beim rendern aus After Effects entsteht.
Zum Testen, bzw. die Lösung des Problems bestand darin, dass ich die Sequenz ausgespielt habe, in Avid Symphony per AMA Link importiert und das Audiofile zum Vergleich nochmal drunter gelegt habe. Ergebnis: After Effects hebt ungefragt den Pegel an.
Habe dann das gleiche MXF Format mit den gleichen Einstellungen aus AVID exportiert ---> Ergebnis keine Veränderung des Pegels.
Meine Frage ist jetzt:
Ist dieses Problem bekannt? Wurde es ggf. in CS6 behoben? Ich hoffe ich bin nicht der einzige dem dieser "Bug" aufgefallen ist, und hoffe das es ggf. gefixt wird.
Vielen Dank
Gruß VUCXKeine Ahnung. Einfach mal Bugreport:
Feature Request/Bug Report Form
Mylenium -
I just got creative cloud 2014 and decided to install After effects on my laptop. I get error to install Adobe Application Manager. I got AAM but installing it, I got an error message "Installer failed to initialize. Please download Adobe support advisor" Now, the support advisor is discontinued. What do I do?
Please anyone help me.
ThanksError "Installer Failed to Initialize" | Install desktop application | Windows
-
I have this on both machines running 10.10.1 OS X and AE 2014. I see on line that others are having this issue. I think it needs a Patch ASAP.
Hello. Basically I can create a new comp that is set to 1920 x 1080, @ 30 frames per second for 1 minute TRT. I create a new solid layer, say red. I hit space bar or play on the screen, and it does not play in real time. ITs on my Imac as well. same OS and Same Version software.
After effects running prerendered @ 17 FPS and fluctuating up to 20 when it should be playing @ real time. After effects 2014 CC , brand new Mac pro strapped 10.10.1
created by Dave LaRonde in After Effects - View the full discussion
Well, before you hit the panic button, why don't you tell us precisely what you're doing when AE plays at 17fps -- the keys you hit, the buttons you click to begin play.
If the reply above answers your question, please take a moment to mark this answer as correct by visiting: https://forums.adobe.com/message/7102588#7102588 and clicking ‘Correct’ below the answer
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page:
Please note that the Adobe Forums do not accept email attachments. If you want to embed an image in your message please visit the thread in the forum and click the camera icon: https://forums.adobe.com/message/7102588#7102588
To unsubscribe from this thread, please visit the message page at , click "Following" at the top right, & "Stop Following"
Start a new discussion in After Effects by email or at Adobe Community
For more information about maintaining your forum email notifications please go to https://forums.adobe.com/thread/1516624.
Geoffrey M. Wetzel
[email protected]
[email protected]
302.353.0798 -
I would like to know if after subscribing to ITunes Match I will be able to delete my library from my PC and, by these means, liberating the disk space currently used by my music
Your purchased music is availble for download again at no cost. If you have iTunes match service, you can download your matched music.
-
I have a iPhone 4S and when watching videos on the internet sound cuts out as the video is playing. The rest of the video plays with no sound. Sometimes when I pause It and play again sound comes back but not all the time. can anyone help?
The "restore disk" is built into the Mac. See About Recovery.
Need more specifics about what error messages you got while installing Adobe Flash.
However, you can almost avoid Flash altogether by setting YouTube to play the HTML5 version instead.
Click the Try something new! link at the bottom of the YouTube page.
I don't know about the sound issue. Might be hardware as you think. Try other headphones to check. -
after upgrading to iOS8 my Exchange account has changed to an invalid address. I can change it but after a day or two it changes back to the invalid address. any help on this would be great. Other user on our exchange server that have iOS 7 or lower do not have this problem. All iOS 8 users in our company have this problem
have you deleted the account and re-added it? Have you done a reset or restore as outlined in the iPhone user guide? What troubleshooting have you done?
-
after updating i lost alll settings in phone. nw showing recovery mode, then i try to recover it but after some process its showing error 1015 what to do?
What OS prior to update? Jailbroken?
-
The free space for my iphone on itunes does not match the free space on my iphone after syncing. iTunes shows 6.7 G free, but my iphone shows 6 G free. Why such a delta?
They've never sussed this out - been a problem the last year or two for me regardless of all the new iOS versions and iTunes versions. Regardless of multiple resets and full restores. Mine showed 3.7 avail on computer, less than .5 on phone. I did a reset and full restore. It helped - but still differs dramatically - now showing 5.8 avail on computer but only 2.9 on phone.
APPLE!!! I have spent 10s of thousands on your products both at my business and home - why? "Because it just works" I've been telling people. Not sure if I can keep on saying that if you don't get this figured out!! -
TextArea with formatted Text, Hyperlinks, and clickable Text with SWING?
Hi again,
Ok if I decide to use Swing, is there any TextArea which supports Formatted Text Hyperlinks AND clickable Text wich calls a callback routine??? I think formatted Text and Hyperlinks are possible with JTextArea and the RTF editorKit, but clickable text, in order to controll the program in some way???
Could anyone help me?
GreetsTry the JEditorPane class.See the intro exapmle at the top of
[url=http://java.sun.com/j2se/1.4.2/docs/api/javax/swin
/JEditorPane.html] this page.That seems to be the solution! Can I use the JTextPane, too? Does a DefaultStyledEditorKit support Hyperlinks and Hyperlinklisteners, too?
In order to realize callback functions I have to insert a HTML-Anchor with the Attribute as the Parameter for my method. Then my HyperlinkListener catches the HyperlinkEvent and the hyperlinkUpdate method reminds the parameter!
Is that right?
Thank you very much!
Greets -
I have a MacBook Pro with OS X Yosemit. MY safari will not open, it only comes up with a safari quit unexpectedly report. A new helper app appeared requesting my system password to download the helper. Stupidly I input the password, when I log off I can see the download icon for a split second still running asking to abort or continue. How do I sort this?
cheersGenieo Adware is installed. Removing it will help.
If you have another browser installed, use it.
If not, launch App store and get another browser for temporary use.
Remove it afterwards.
1. Use free AdwareMedic by clicking “Download ” from here
http://www.adwaremedic.com/index.php
Install , open, and run it by clicking “Scan for Adware” button to remove adware.
Once done, quit AdwareMedic by clicking AdwareMedic in the menu bar and selecting
“Quit AdwareMedic”.
or
Remove the adware manually by following the “HowTo” from Apple.
http://support.apple.com/en-us/HT203987
2. Safari > Preferences > Extensions
Turn those off and relaunch Safari to test .
Turn those on one by one and test.
3. Safari > Preferences > Search > Search Engine :
Select your preferred search engine.
4. Safari > Preferences > General > Homepage:
Set your Homepage. -
Need help with formatting a software RAID 5 array with xfs
Hi,
i'm tying to format a software RAID 5 array, using the xfs filesystem with the following command:
# mkfs.xfs -v -m 0.5 -b 4096 -E stride=64,stripe-width=128 /dev/md0
but all I get is the attached error message. It works fine when I use the ext4 filesystem. Any ideas?
Thanks!
http://i.imgur.com/cooLBwH.png
-- mod edit: read the Forum Etiquette and only post thumbnails http://wiki.archlinux.org/index.php/For … s_and_Code [jwr] --Sorry I numbered them to show the flow of information, this was also just a place for me to store info as I worked through it. I managed to get it to work by creating a partition that takes up the whole drive and is actually 22 GB larger than all the other drives (since I found out that the had root, swap and home partitions that are no longer needed).
I should be able to resize the other partitions without a problem, correct? They're EXT4. Should I unmount the raid array and do them individually, remount the array, let it sync and do the next? Or just unmount the array, resize all of them, mount it and let it sync? -
After installing Lightning 3.3 I created a new Calendar (infomaniak).
This Calendar is synchronisaning with my Webmail Provider (www.infomaniak.ch).
Il followed the instructions from my Webmail Provider (user name and password).
When this is created normally I have to received the display to write my User-Name and Password but theese are not asked.
The calendar informaniak es created but is always Switched Off.
Thanks a lot for helping.
Felipe Valenz
1028 Préverenges
Switzerland
e-mail: [email protected]Unfortunately since you didn't mark your post as a question, the VZW reps that roam this community won't see it nor will they respond to it.
Signed,
Just another customer -
I have an old work e mail address that was a primary apple id. The App Store uses this as a default. I have created a new apple ID and changed this in the settings but the App Store still defaults to the old address. How can I get change this as I cannot update anything at this stage. I cannot create a new password against the ole apple ID as the e mail is no longer valid, old work e mail
Hi tried the various options but ended up deleting the apps associated with the old Appleid and then accessing them from the App Store and reloading. They automatically asked for the new Appleid and password.
-
My iMac has a blank screen showing an icon with a blinking question mark. I have rebooted and still the same. Any ideas?
Mac OS X: Gray screen appears during startup BTW, iOS info is useless, post machine and OS version specifics.
27" i7 iMac (Mid 2011) refurb, OS X Yo (10.10), Mavs, ML & SL, G4 450 MP w/10.5 & 9.2.2
Maybe you are looking for
-
How to lock a specific map with a password in FINDER?
I don't use a password on my mac because you have to fill it out the whole time for ridiculous reasons. But I have one map, with all my financial numbers and invoices, that I want to secure with a password. How to do that? I already tried some things
-
ABUMN: Posting with trans.type 300 not possible (No acquisition posted)
Hello everyone, I have seen a few threads on this topic, however I am still not finding a resolution to my issue. I am very new to the FICO configuration scene and probably need a little more hand holding than the others who have asked this question
-
How-to map multiple explicit search help values to context attributes?
Hi, I have a custom explicit Search Help with multiple attributes set as export and uses search help exit for data retrieval. I have set this Search Help for one of the context attribute that is binded to one of the input fields on view. Now, is it p
-
Internet speed drops 85% when routed through WRT160NL
I have a WRT160NL, and it decreases my internet speed from 3700kbps down to 550kbps when I route through it. My ADSL modem is connected via ethernet cable to the WRT160NL, then I have an ethernet cable from port#1 of the WRT160NL to my desktop comp
-
Printing a field list in Crystal XI
Post Author: Gemmell Neilson CA Forum: Crystal Reports I am using Crystal XI Professional and trying to create reports using a database that is completely foreign to me. There are at least 50 tables in the source database. I'm trying to avoid searchi