Hiding a Characteristic column in Result sheet

Hello,
I wish to suppress (or hide) a Characteristic which has been defined in the ROW area of BEx Designer. All these Characteristic rows make up a particular column in the resultsheet and i want to hide this column.
Reg,
SD

Hi --
For that you Right click on the charecteristic in the BEX designer and select NoDisplay option.
Regards,
Vishwa.

Similar Messages

Hiding different characteristic columns for 2 separate key figures - Part 2

This is the case even if I hide display for FY / Period. I have even tried saving the query as a workbook and hiding the blank columns, but they are displayed again each time the workbook is refreshed. The workbook remains input ready, but before any values can be entered, the system asks for a refresh amd when I refresh, the hidden columns are displayed again.
Is there any solution to this problem (maybe via SAP exit, etc.)? I am on the verge of providing the users with two different input ready queries, one for LV Budget and one for Budget, but this is not a good solution and these figures are related and we would like to input them in one place. Sorry for the long post, hope I have made myself clear. Any help provided is sincerely appreciated, thanks.
Regards

Hi,
If you are trying this option then check the workbook settings for column width/ display format after refesh. Select the appropriate.
I hope it will help.
Thanks,
S

Hiding different characteristic columns for 2 separate key figures - Part 1

Hi,
I am defining an input ready query for Integrated Planning. The aggregation level and layout in BEx Query Designer are as follows:
Company Code - Column
Business Area - Column
Chart of Accounts - Column (Hidden)
G/L Account - Column (with Hierarchy display based on FSV enabled)
Fiscal Year Variant - Column (Hidden)
Fiscal Year - Column (Hidden)
Fiscal Year / Period - Row
Budget (Custom Key Figure like 0BALANCE) - Row
LV Budget (Custom Key Figure like 0BALANCE) - Row
The output is as follows (for three months, without hierarchy display for ease of understanding):
                                         LV Budget                      Budget
CCode Bus Area G/L Account FY/Period Jan 2010 Feb 2010 Mar 2010   Jan 2010 Feb 2010 Mar 2010
ABC    1100      1022514                 1000.00   1500.00   2000.00    1200.00   1600.00   2200.00
ABC    1100      1022515                 1100.00   1600.00   2100.00    1300.00   1700.00   2300.00
So far so good. The KF are input ready and I am able to save values. The problem is that the business requirement is for a different number of columns to be displayed for LV Budget and Budget, i.e. LV budget is only maintained for, say the first 2 months and budget is maintained for 3 months. Ideally the output should be 2 columns (Jan and Feb 2010) for LV Budget and 3 columns for Budget (Jan - Mar 2010). Currently, I am getting 3 columns each for LV Budget and Budget (Jan - Mar 2010).
I have tried removing Fiscal Year / Period from the drilldown (across) and creating a structure with five selections, 2 for LV Budget and 3 for Budget with the appropriate selections accordingly:
Key Figure = LV Budget, Fiscal Year Variant = K4, FY / Period = 001.2010 - 002.2010
Key Figure = Budget, Fiscal Year Variant = K4, FY / Period = 001.2010 - 003.2010
The issue is that the query is no longer input ready if FY / Period is removed as a drilldown across. I have tried adding it to the new structure but it gives rise to three columns for each selection, two of them blank (the ones for other FY / Periods than the one specified in the selection), for example:
LV Budget   Jan 2010 Feb 2010 Mar 2010   Jan 2010 Feb 2010 Mar 2010
            1000.00                               1500.00

Hi,
Just try swapping Key figures with Fiscal/Year period in your basic structure (the very first one)
I hope it will help.
Thanks,
S

BEx analyzer 7.x: How to determine first data column in result table?

Hi,
we are upgrading to 2004s where the SAPBEXqueries Sheet is not used anymore. Instead there is BExRepositorySheet. Is there a way to determine first data column in result table?
Regards, Josko.

hi dinesh......
please use 'INTO TABLE' instead of ' INTO CORRESPONDING FIELDS OF TABLE '. and use ' FOR ALL ENTRIES '............based on relavence ....coz when I set break point over the select queries it took me long time to execute .......
becoz u didnt used the for all entries in select query ............ u r read statement
READ TABLE I_KNA1 INTO WA_KNA1 WITH KEY KUNNR = WA_KNVV-KUNNR. .....
it is reading wrong kunnr value .............even it took long time to execute ......
use sort where ever required...
use for all entries .......and check weather the table initial or not......
use sy-subrc check where ever reqired ..............

Transferring multi-column query result into MS Excel

Hello everybody!
An ultimate novice in Oracle, with some database concepts, is here.
The very first challenge; which I encoutered is that I want to transfer a Select query result, with multiple columns, into MS Excel sheet in a way that each field occupies a separate column in the sheet.
I hope the forum members will show me a simple way to get around the problem.
Thanks in anticipation.
Rabi

what will happen the query returns too many rows that
Excel cant hold? I faced this problem and divided the
report into "n" numbers based on the number of rows
returned. Is there any internal logic for it in
oracle?Excel is capable of holding 65536 rows of data on a sheet.
Oracle is capable of writing data out to files.
Oracle does not know or care whether the file it is writing is for Excel or any other product, as the file you are likely to be writing is CSV (comma seperate format) which is an open format, not specifically for Excel. If you need to limit the number of rows per CSV file then you will have to code this "business logic" into your code that produces the CSV file from Oracle.

Hiding a dimension column in report

Hi,
I want to use a dimension column in criteria with other columns. But i dont want to display it in the results. How can i hide this particular column in result.
Please suggest.

I got it.
It is availabe in column properties->column format->Hide.
Thanks.

Adding columns to result list in inbox view of web client

Hi,
I have a requirement to display custom columns in result list of inbox view of web client. I copied the view and controller to custom name space. In BSP_WD_WORKBENCH , for AUIITEM view, there are two context nodes . AUIITEMTREE is one of thena and has tree structure and under it tree node proxy. Tree node proxy has attributes, I can not add more attributes to Tree node proxy in work bench. Would you please any one suggest the approach to solve this problem.
Thanks in advance.
With regards,
Ravi Kumar

Hi Ravi,
Have u got solution for ur problem.I have got same requirement.
As per my requirement I need to search for Sold To Party for all category and display it in AUIITEM.
Please provide with some inputs .
Regards,
Vikas

How can I copy a row from one sheet and paste it in a column in another sheet?

I would like to copy a row of numbers from one sheet and paste it into a column in another sheet. Is it possible to do this with numbers?

Hi Dennis,
Numbers doesn't have a built-in Paste Special > Transpose the way you have in Excel. However, there are ways to do this in Numbers that are not difficult.
Here are two ways:
Approach 1:
Select the row of numbers, and command-c to copy to the system clipboard.
Click on the canvas and command-v to paste, automatically creating a new table.
With that new table still selected, in your menu choose Table > Transpose Rows and Columns.
Select the cells in the transposed table, command-c to copy, click once in a cell of the destination column of your target table, and command-v to paste.
Approach 2: (after a quick installation, very similar to Excel's built-in Paste Special > Transpose)
Download this Copy Transpose Automator Service, and double-click to install (if necessary choosing Open Anyway in System Preferences > Security and Privacy).
Thereafter to use just:
select the row of numbers you want to copy
with the cells still selected, choose Copy Transpose from the Numbers > Services menu
click once in the destination column and command-v to paste the transposed values.
Note that the second approach does not handle cells with formulas, whereas the first approach will.
SG

"Pie chart in pivot view showing only the first column's results" in obiee

Hi,
In my pivot view(pie chart view+pivottable),i'm getting only the first column's result in pie chart..
I have added a column named *'A*' in rows and '*moneyspent*' in measuresfield and the '*period*' in the columnsfield in the pivot view.I'm calculating the sum of
the rows and columns..
I'm not getting the sum valueof moneyspent in the pie chart..instead i'm getting only the first column of period in the pivot table in the pie chart.
can anyone tell how can i get the sum value of pivot table in pie chart?
Thanks in advance..

Hi Prash,
let me try to give you an example based on the paint sample:
Use Markets.Region, Products.Brand, 'Sales Measures'.Units
choose a pivot view to display the result: region goes into the rows-section, Brand goes into the columns-section and Units into the measures-section
In the columns-section add a total using the 'add total' at 'Measure Labels' level
the result is a total column on the right side of the pivot.
looking like this:
Units
Brands
Region Enterprise Magicolor Mccloskey Valspar Units Total
Central 1032.....
Eastern 1485......
Southern 824.....
Western 580
What I am looking for is a new column 'Units Total pct'.
If I duplicate the measure to show the values in percent, I'll get a second column per Brand (showing the absolute and percentage values) - that's what I don't want
Regards
Andy

Blank column in spread sheet when i am downloading?

hai fnds...any one help for the below issue
i have developed ALV report used ( layout also in that ).displaying 19 fields in the output. but when i am downloading spread sheet iam getting one blank column in spread sheet.(but all 19 fields are comming ). i dont know why i am getting second column is blank? but otherthan spreadsheet format is not getting any blank column.
here for the purpose of change layout and save layout i am using
DATA: gv_boxnam TYPE slis_fieldname value 'VENUM'.
VENUM field which is in internal table but not displaying the output. is this any problem?
Suppose if i take DATA: gv_boxnam TYPE slis_fieldname value 'VBELN'. which is in internal table and displaying the output..in this case i m not getting the VBELN in the output..i am getting only 18 fields in the output.
Thanks,
Raghu.

the download is a copy of the table behind the ALV display. It sounds like the table for the ALV display contains a column that is flagged as no output?

Add new columns in result of Transaction ME2L

Hello,
My requirement is to add two fields from table EKPO (BEDNR and AFNAM) in the result of ME2L.
Does anyone know how to proceed?
Is there an exit which will enable me to do so?
Thanks a lot for your help.

Hi,
Add new columns in result of Transaction ME2L
Regarding on your problem. The below link will helps to you.
Modifying ME2L, ME2M with out copying into Z program
Regards,
Sekhar

Unable to find specied column in result set.

i m trying to display database values in textboxes on SelectedIndex_Changed event of list box control but i am getting "Unable to find specified column in result set" again n again..
why this is so??????

i have to create a new iview from the template of mdm iviews. then i was asked about the alias property.
thanks,
raghavendra

Hide specification column in result recording at plant level

Hi,
There is an requirement to hide specification column in result recording screen at plant level.
By table control we can hide the specification column but the setting is at user level or client level.
Is there any standard procedure to hide specification column at plant level.
Regards
Amol

Dear Amol,
Try this if works for you.
1.     Go to QA32
2.     Select an inspection lot
3.     Click on results
4.     Here you will get the specification column along with RR column
5.     Reduce the width of specification column just like we do in Microsoft excel by dragging it from right to left until it disappears
6.     At the right hand side you find a small table like symbol. When you move your mouse pointer towards it, it reflects as Configuration.
7.     Click it
8.     Give suitable name to variant and save
This is user ID specific.
Best Regards,
Anand Rao

Sports Results Sheet in Numbers

Hi all,
I have a sheet of sports scores which I update with new results after each game. I currently manually add each result, and then across the various tables I have in Numbers depending on which info each table displays. I am slowly working towards this process being more automated, with formulas updating these tables as required rather than going through each sheet, often repeating the same information.
One initial problem I have with the basic formulas is for it automatically working out and displaying whether the score is a win, loss or draw for my team. Putting one team's score in one column (e.g. column A) and the other team's in the next (e.g. column B) I would like to understand the formula behind getting Numbers to work out if A is more than, less than or equal to column B, and depending on the result displaying a 'W', 'L' or 'D' in a third column.
I think once I understand this (potentially using IF statements?) I'll be able to work out further formulas for other information.
Any help would be much appreciated, thank you in advance. I'm sure this is incredibly basic for those with more spreadsheet eperience than I have.
Elliot

If the Your team is in Column A and the oppoenent is in column B then in column C you can do something like this:
C2=IF(COUNTA(A2:B2)<2, "",IF(A2=B2, "Draw",IF(A2>B2,"Win","Loss") ))
this is shorthand for, select cell C2, then type (or copy and paste from here) the formula:
=IF(COUNTA(A2:B2)<2, "",IF(A2=B2, "Draw",IF(A2>B2,"Win","Loss") ))

How to Open a URL that is displayed in the Column of Results Region in OAF

I need to open Invoice pdf from OAF page. The link to the pdf is obtained from other table.
This is similar to Open Image button that we have in Payables--> Invoice: Entry --> Invoice form.
I need to develop an OAF page where in when the user clicks on the pdf url link, the corresponding pdf has to open for the transaction line.
I have an OAF page for which in the results region, i retrieve a column that contains URL addresses.
Say, I have a column named: URL_ADDRESS (www,yahoo.com) in a table and when i press the search button, all the URL addresses are populated in the results region.
I have defined an item with Style: messageStyledText, and i have set the View Instance and View Attribute properties corresponding to the VO that it is referring to...
What property do i need to set in DestinationURL??
My OAF page is based on pure VO. I dont use EO in my OAF page.
Edited by: user9947366 on Feb 26, 2009 10:56 PM

My question is more on how to find the resource from a
particular location.
To be more specific, when I use /myresource/image.gif,
how cat I instuct it
to use the image.gif file which is in myjar.jar?
Thanks.getResource() will search the CLASSPATH for the given resource. If myjar.jar is your application and contains a file "image.gif" in the directory "myresources" gif the above given code will load the image from the jar.

Hiding a Characteristic column in Result sheet

Similar Messages

Maybe you are looking for