Hiding the selection screen blocks
Hello SDNers,
This is my scenario.
I need to have 2 selection screens ie b1 and b2.
initially b2 should be hidden and when i make a selection on b1 the block b2 should be displayed.
Eg :
selection-screen begin of block B1.
parmeter : r_cust radiobutton group grp1,
r_ven t radiobutton group grp1.
selection-screen end of block B1.
selection-screen begin of block B2.
parmeter : r_cret radiobutton group grp2,
r_chg radiobutton group grp2,
r_disp radiobutton group grp2,
selection-screen end of block B2.
Is this possible if yes please paste a sample snippet for understanding.
Help would be highly appreciated and rewarded.
Thanks in advance
Regards,
Ranjith N
Hi...
Please check the code...
It will solve your problem
selection-screen: begin of block c1 with frame title text-001.
selection-screen skip.
parameter: p_singl type char01 radiobutton group rsel
default 'X' user-command s_per, " Single record
p_mult type char01 radiobutton group rsel." Multiple recrd
selection-screen: end of block c1.
selection-screen: begin of block c2 with frame title text-001.
selection-screen skip.
parameter: p_matnr type matnr modif id m1, " KMAT
p_atwrt type zcatnum modif id m1, " Catalog string
p_sr_des type atwrt modif id m1. " Series Designator
selection-screen: end of block c2.
selection-screen: begin of block c3 with frame title text-001.
selection-screen skip.
PARAMETER: p_pc radiobutton group err user-command ucomm
modif id m4, " Presentation server
p_server radiobutton group err default 'X'
modif id m4, " Application server
p_f_pc type localfile modif id m3, " PC file name
p_fname type localfile modif id m2. " Apltn srvr file path
selection-screen: end of block c3.
at selection-screen output.
Design selection parameters dynamically
perform sub_set_file_param.
form sub_set_file_param .
loop at screen.
If single record is checked
if p_singl is not initial.
if screen-group1 = 'M2' or
screen-group1 = 'M3' or
screen-group1 = 'M4'.
screen-active = 0.
endif.
If multiple record and application server is checked
elseif p_mult is not initial and
p_server is not initial.
if screen-group1 = 'M1' or
screen-group1 = 'M3' .
screen-active = 0.
endif.
If multiple record and presentation server is checked
elseif p_mult is not initial and
p_pc is not initial.
if screen-group1 = 'M1' or
screen-group1 = 'M2' .
screen-active = 0.
endif.
endif.
Modify the screen
modify screen.
endloop.
endform. " sub_set_file_param
Thanks
Subhankar
Similar Messages
-
Hiding the Selection-screen contents
Hi all,
I wants to hide below selection screen contents(do'nt wants to display in the output)
SELECTION-SCREEN BEGIN OF BLOCK alv WITH FRAME TITLE alvframe.
PARAMETERS:
p_layout LIKE disvariant-variant,
p_list RADIOBUTTON GROUP alv ,
p_grid RADIOBUTTON GROUP alv DEFAULT 'X' .
SELECTION-SCREEN END OF BLOCK alv.
How to do this?
Thanks
Umeshwrite as below ...
SELECTION-SCREEN BEGIN OF BLOCK alv WITH FRAME TITLE alvframe.
PARAMETERS:
p_layout LIKE disvariant-variant modif id abc,
p_list RADIOBUTTON GROUP alv modif id abc,
p_grid RADIOBUTTON GROUP alv DEFAULT 'X' modif id abc .
SELECTION-SCREEN END OF BLOCK alv.
INITIALIZATION.
loop at screen.
if screen-group1 eq 'ABC'.
screen-active = 0.
modify screen.
endif.
endloop. -
Filtering of the data based upon the selection screen data using ldb
Hi Experts ,
I am using ldb pnpce, for my report ,and i created my own report category with selection paramaters
action type and payroll area
now the problem is when i am giving the action type as Z0 ,the data to be extracted is not getting filtered
based upon the action type ,the data consists the records having different action types other than Z0
Please give me some solution for thisThanks Durga ,but the link wat ever u was for hiding the selection screen fields
but my question is when am using get pernr event my data is not getting filtered with the selection screen paramater value
i,e m giving action type as only hiring ,but m getting the data for all the action types ,its not filtering based upon my selection -
Hideing the select options in selection screen
I have 2 radio buttons in the selection screen.
SELECTION-SCREEN BEGIN OF BLOCK b2 with frame title text-018.
parameters : GR1 Radiobutton group rg1 default 'X',
GR2 Radiobutton group rg1.
SELECTION-SCREEN END OF BLOCK b2.
SELECTION-SCREEN BEGIN OF BLOCK b1 with frame title text-017.
Select-options : z_s_werk for t001w-werks obligatory,
z_s_matn for marc-matnr,
z_s_bdat for mkpf-budat obligatory.
z_s_lifn for mseg-lifnr.
z_s_sgtx for mseg-sgtxt.
z_s_bwar for mseg-bwart.
SELECTION-SCREEN END OF BLOCK b1.
if GR1 = 'X'.
i have to hide z_s_sgtx for mseg-sgtxt.
if GR2 = X.
I have to hide z_s_lifn for mseg-lifnr.
is there any way for hideing this.
Regards,
Selvapriya S.hi,
SELECTION-SCREEN BEGIN OF BLOCK b2 WITH FRAME TITLE text-018.
PARAMETERS : gr1 RADIOBUTTON GROUP rg1 DEFAULT 'X' USER-COMMAND ud,
gr2 RADIOBUTTON GROUP rg1.
SELECTION-SCREEN END OF BLOCK b2.
SELECTION-SCREEN BEGIN OF BLOCK b1 WITH FRAME TITLE text-017.
" Remove obligatory and do validations for the fileds which have OBLIGATORY at EVENT
" AT SELECTION-SCREEN .
SELECT-OPTIONS : z_s_werk FOR t001w-werks ,"(OBLIGATORY)
z_s_matn FOR marc-matnr,
z_s_bdat FOR mkpf-budat," OBLIGATORY,
z_s_lifn FOR mseg-lifnr,
z_s_sgtx FOR mseg-sgtxt,
z_s_bwar FOR mseg-bwart.
SELECTION-SCREEN END OF BLOCK b1.
AT SELECTION-SCREEN OUTPUT.
IF gr1 = 'X'.
LOOP AT SCREEN.
IF screen-name = 'Z_S_SGTX-LOW' OR
screen-name = 'Z_S_SGTX-HIGH' OR
screen-name = '%_Z_S_SGTX_%_APP_%-VALU_PUSH' OR
screen-name = '%_Z_S_SGTX_%_APP_%-VALU_PUSH' OR
screen-name = '%_Z_S_SGTX_%_APP_%-TO_TEXT' OR
screen-name = '%_Z_S_SGTX_%_APP_%-OPTI_PUSH' OR
screen-name = '%_Z_S_SGTX_%_APP_%-TEXT'.
screen-active = 0.
ELSE.
screen-active = 1.
ENDIF.
MODIFY SCREEN.
ENDLOOP.
ELSE.
LOOP AT SCREEN.
IF screen-name = 'Z_S_LIFN-LOW' OR
screen-name = 'Z_S_LIFN-HIGH' OR
screen-name = '%_Z_S_LIFN_%_APP_%-VALU_PUSH' OR
screen-name = '%_Z_S_LIFN_%_APP_%-VALU_PUSH' OR
screen-name = '%_Z_S_LIFN_%_APP_%-TO_TEXT' OR
screen-name = '%_Z_S_LIFN_%_APP_%-OPTI_PUSH' OR
screen-name = '%_Z_S_LIFN_%_APP_%-TEXT'.
screen-active = 0.
ELSE.
screen-active = 1.
ENDIF.
MODIFY SCREEN.
ENDLOOP.
ENDIF.
for example.
AT SELECTION-SCREEN on Z_S_SGTX.
if Z_S_SGTX is initial.
" Raise an error message here
Endif.
Thanks & REgards -
How to hide the selection-screen Begin of Block
Hi,
I copied the standard program into my new 'Z' prog.
But i dont need a selection-screen begin of block and end of block i.e. I have to hide the entire block from the output screen.
I can delete the selction-screen block , but the field which is present inside the block is used in several places of program
and i dont know the purpose of the fields.
Can any one help me to hide the block.
Thanks in advanced
Regards,
DarshanaHi
Use keyword NO-DISPLAY with the select options or parameter which u want to hide in the selection screen.
No need to comment statements Begin of block or end of block.
SELECTION-SCREEN BEGIN OF BLOCK ss_01 WITH FRAME TITLE text-001.
SELECT-OPTIONS: s_month FOR isellist-month no-display .
PARAMETERS: p_email LIKE somlreci1-receiver no-display.
SELECTION-SCREEN END OF BLOCK ss_01.
It will work this way.
Thanks -
Regarding hiding Selection screen block
hi all ,
i have 2 blocks in the selection screen. the First block has 4 radiobuttons and the second block has 4 parameters.
i need to hide the block 2 based on the radiobutton checked in the initail block.
if radiobutton 1 or 2 is selected then the block should not be visible and if the rdbtn 3 or 4 is selected the block should be visible
i have wriiten the code but it doesn't work at all. the block is hidden but when i select the radiobtn 3 or 4 it doesn't work
the code i hve wriiten is as follows
SELECTION-SCREEN BEGIN OF BLOCK b1 WITH FRAME TITLE text-001.
PARAMETERS: par1 RADIOBUTTON GROUP rg2 DEFAULT 'X' USER-COMMAND ucom1
PARAMETERS: par2 RADIOBUTTON GROUP rg2 .
PARAMETERS: par3 RADIOBUTTON GROUP rg2 .
PARAMETERS: par4 RADIOBUTTON GROUP rg2
SELECTION-SCREEN END OF BLOCK b1.
SELECTION-SCREEN BEGIN OF BLOCK a1 WITH FRAME TITLE text-001.
SELECTION-SCREEN BEGIN OF LINE.
PARAMETER p_pwwrk TYPE plaf-pwwrk MODIF ID FSC.
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN BEGIN OF LINE.
PARAMETERS p_wch TYPE cr_hname MODIF ID FSC.
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN BEGIN OF LINE.
SELECT-OPTIONS s_mdv01 FOR g_mdv01 MODIF ID FSC.
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN END OF BLOCK a1.
I have declared this after Initialization.
AT SELECTION-SCREEN OUTPUT.
if par3 eq 'X' or par4 eq 'X'.
LOOP AT SCREEN.
IF screen-group1 = 'FSC'.
screen-active = 0.
MODIFY SCREEN.
ENDIF.
ENDLOOP.
endif.
can anybody please suggest.
Thanx
SrinivasHiding Input Fields Locate the document in its SAP Library structure
To suppress the display of the input field on the selection screen, you use the following syntax:
PARAMETERS p ...... NO-DISPLAY ......
Although parameter p is declared, it is not displayed on the selection screen.
If the parameter belongs to the standard selection screen, you can assign a value to it either by using the DEFAULT addition when you declare it, or during the INITIALIZATION event. If you call the executable program using the SUBMIT statement, the calling program can also pass the value.
When you use user-defined selection screens, you can assign a value to the parameter at any time before calling the selection screen.
If you want to display a parameter only in certain cases, for example, depending on the values entered by the user in other input fields of the selection screen, you cannot use the NO-DISPLAY addition. If you use NO-DISPLAY, the parameter actually is an element of the interface for program calls, but not an element of the selection screen. As a result, you cannot make it visible using the MODIFY SCREEN statement.
To hide a parameter that is an element of the selection screen, you must declare it without the NO-DISPLAY addition and suppress its display using the MODIFY SCREEN statement.
We can Hide parameter / select option in selection screen dynamically by manipulating screen object.
SCREEN is like an internal table with a header line. However, you do not have to declare it in your program. Go to debugging mode and then view structure of screen.
You can modify SCREEN in your ABAP program during the PBO event of a screen. Its contents override the static attributes of the screen fields for a single screen call. The only statements that you can use with SCREEN are:
LOOP AT SCREEN.
MODIFY SCREEN.
ENDLOOP.
We can hide parameter by set screen-active to 0.
Here is example of how to hide parameter in selection screen. Write it, and change click on radiobutton to hide parameter.
REPORT ZAALGAL0006.
DATA: d_ucomm LIKE sy-ucomm.
PARAMETERS: p_grpa1(10) MODIF ID A,
p_grpa2(5) MODIF ID A,
p_grpb1(2) MODIF ID B.
PARAMETERS: p_actA RADIOBUTTON GROUP rad1 USER-COMMAND ACT DEFAULT 'X',
p_actB RADIOBUTTON GROUP rad1.
AT SELECTION-SCREEN.
d_ucomm = sy-ucomm.
AT SELECTION-SCREEN OUTPUT.
LOOP AT screen.
IF p_actA = 'X'.
IF screen-group1 = 'B'.
screen-active = 0.
ENDIF.
ELSEIF p_actB = 'X'.
IF screen-group1 = 'A'.
screen-active = 0.
ENDIF.
ENDIF.
MODIFY screen.
ENDLOOP.
START-OF-SELECTION.
regards,
srinivas
<b>*reward for useful answers*</b> -
Need to hide one of the selction screen block
Hi Gurus!
I need to hide one of the block in my selectrion screen and only display one radio button in that selection screen block . Somehow its not hiding the enitre block , so I tried doing the fields invisible but when it is transported it again makes it visible . Is it possible to do it through programming code itself rather than through screen.
Follwoing is the block that I need to hide.
SELECTION-SCREEN BEGIN OF BLOCK b4 WITH FRAME TITLE text-004.
PARAMETERS:
rb_list RADIOBUTTON GROUP rb1 DEFAULT 'X' USER-COMMAND opt.<<<<<<<<need to hide this
SELECTION-SCREEN BEGIN OF BLOCK b4i WITH FRAME TITLE text-005 .<<< need to hide this block
PARAMETERS: p_header AS CHECKBOX MODIF ID b5,
p_send AS CHECKBOX MODIF ID b5 USER-COMMAND opt,
p_overr TYPE sy-uname MODIF ID b6,
p_alines AS CHECKBOX MODIF ID b5.
SELECTION-SCREEN END OF BLOCK b4i .
PARAMETERS: rb_alv RADIOBUTTON GROUP rb1 DEFAULT 'X'.<<<< Just need to show this on my selection screen
SELECTION-SCREEN END OF BLOCK b4.
In the above code I need to hide the block b4i and the radiobutton rb_list.
Help will be gretaly appreciated.
Regards
AaravHi!
Thanks for the input but addition of that still gives me the first radiobutton 'rb_list 'in my selection screen .
SELECTION-SCREEN BEGIN OF BLOCK b4 WITH FRAME TITLE text-004 .
PARAMETERS:rb_list RADIOBUTTON GROUP rb1 MODIF ID rad .<<<<< This is still showing up --want to hide this
SELECTION-SCREEN BEGIN OF BLOCK b4i WITH FRAME TITLE text-005 .<<<<< want to hide is block completely
PARAMETERS: p_header AS CHECKBOX MODIF ID b5 ,
p_send AS CHECKBOX MODIF ID b5 USER-COMMAND opt,
p_overr TYPE sy-uname MODIF ID b6,
p_alines AS CHECKBOX MODIF ID b5.
SELECTION-SCREEN END OF BLOCK b4i .
PARAMETERS: rb_alv RADIOBUTTON GROUP rb1 DEFAULT 'X'.<<< Just need to show this param,etere on the screen
SELECTION-SCREEN END OF BLOCK b4.
* At Selection screen output
AT SELECTION-SCREEN OUTPUT.
LOOP AT SCREEN.
IF rb_list IS INITIAL AND ( screen-group1 = 'B5').
screen-active = '0'.
MODIFY SCREEN.
ELSEIF screen-group1 = 'B5'.
screen-active = '1'.
MODIFY SCREEN.
ENDIF.
IF p_send IS INITIAL AND screen-group1 = 'B6'.
screen-active = '0'.
MODIFY SCREEN.
ELSEIF screen-group1 = 'B6'.
screen-active = '1'.
MODIFY SCREEN.
ENDIF.
CHECK screen-group1 = 'RAD' OR
screen-group1 = 'B4' OR
screen-group1 = 'B5' OR
screen-group1 = 'B6' OR
screen-active = 0.
MODIFY SCREEN.
Thanks
Edited by: Aarav Agnihotri on Sep 29, 2009 6:08 PM -
Problem with checkbox in the selection screen
Hi guys,
I have a problem with the check box in the selection screen.When i select a check box then a field in the selection screen should be enabled for entering a value.Again if i unselect the checkbox then the field should be disabled for entering a value.I have written the code in at selection-screen output.
The problem is when i select the check box ,the field is not enabled.But when i press enter after selecting the checkbox then the field is enabled for input.It is the same when i unselect the checkbox,after i press enter only the field is getting disabled.What could be the problem.Any suggestions please?
Thanks.Hi d p
Please try this code . I think this code have some way that you would like.
REPORT zdownload_to_application_server.
TABLES : caufvd, jest.
I N C L U D E P R O G R A M *
*INCLUDE znrpstnd.
Selection Screen *
SELECTION-SCREEN BEGIN OF BLOCK b3 WITH FRAME TITLE text-t03.
PARAMETERS: p_outb RADIOBUTTON GROUP g1 USER-COMMAND outb DEFAULT 'X' ,
p_inb RADIOBUTTON GROUP g1.
SELECTION-SCREEN END OF BLOCK b3.
SELECTION-SCREEN BEGIN OF BLOCK b1 WITH FRAME TITLE text-t01.
PARAMETERS : p_werks LIKE caufvd-werks MODIF ID a. " Plant "OBLIGATORY
SELECT-OPTIONS : s_auart FOR caufvd-auart MODIF ID a, " Order Type
s_aufnr FOR caufvd-aufnr MODIF ID a. " Order number
PARAMETERS: p_path TYPE string DEFAULT 'C:\SchedulerInterface-OutboundTextFile\' MODIF ID a,
p_actual AS CHECKBOX MODIF ID a. " Transfer Actual
SELECTION-SCREEN END OF BLOCK b1.
SELECTION-SCREEN BEGIN OF BLOCK b2 WITH FRAME TITLE text-t02.
PARAMETERS : p_werks2 LIKE caufvd-werks MODIF ID b, " Plant "OBLIGATORY
p_path2 TYPE string DEFAULT 'C:\SchedulerInterface-InboundTextFile\' MODIF ID b,
p_path3 TYPE string DEFAULT 'C:\SchedulerInterface-InboundTextFile\' MODIF ID b,
p_sessio TYPE apqi-groupid MODIF ID b. " BDC Session
SELECTION-SCREEN END OF BLOCK b2.
AT SELECTION-SCREEN OUTPUT.
IF p_outb EQ 'X'. " Outbound --> Hide inbound
LOOP AT SCREEN.
"IF screen-name = '%BT02011_BLOCK_1000'.
IF screen-group2 = 'BLK'.
screen-active = 1.
MODIFY SCREEN.
ENDIF.
IF screen-group1 = 'A'.
screen-active = 1.
MODIFY SCREEN.
ENDIF.
IF screen-group1 = 'B'.
screen-active = 0.
MODIFY SCREEN.
ENDIF.
ENDLOOP.
ELSE.
LOOP AT SCREEN.
"IF screen-name = '%BT01004_BLOCK_1000'.
IF screen-group3 = 'BLK'.
screen-active = 1.
MODIFY SCREEN.
ENDIF.
IF screen-group1 = 'A'.
screen-active = 0.
MODIFY SCREEN.
ENDIF.
IF screen-group1 = 'B'.
screen-active = 1.
MODIFY SCREEN.
ENDIF.
ENDLOOP.
ENDIF.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR p_path2.
CALL FUNCTION 'WS_FILENAME_GET'
EXPORTING
def_path = 'C:\SchedulerInterface-InboundTextFile\'
mask = ',Text Files,.txt,All files,.*.'
IMPORTING
filename = p_path2
EXCEPTIONS
inv_winsys = 1
no_batch = 2
selection_cancel = 3
selection_error = 4
OTHERS = 5.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR p_path3.
CALL FUNCTION 'WS_FILENAME_GET'
EXPORTING
def_path = 'C:\SchedulerInterface-InboundTextFile\'
mask = ',Text Files,.txt,All files,.*.'
IMPORTING
filename = p_path3
EXCEPTIONS
inv_winsys = 1
no_batch = 2
selection_cancel = 3
selection_error = 4
OTHERS = 5.
TOP-OF-PAGE.
START-OF-SELECTION.
Regards
Wiboon -
How to use MM/YYYY Format in the selection Screen?
There is this program RMCB0300 where the date format in the selection screen has MM/YYYY Format.
I am working on a report which requires it "Period" Field in the selection screen to be in the same format.
However, i am trying to give the select option as " SL_SPMON FOR S031-SPMON MODIF ID PER." and declaring S031 table in the declaration part.
But still, its not been able to provide me F4 help in the inpur screen.
Can someone please provide me some guidance in this regard?Hi,
the following works for me..
*& Report ZPMONAT *
report zpmonat .
tables: s031.
selection-screen begin of block abc.
select-options: sl_spmon for s031-spmon.
selection-screen end of block abc.
at selection-screen on value-request for sl_spmon-low.
perform monat_f4.
at selection-screen on value-request for sl_spmon-high.
perform monat_f4.
start-of-selection.
end-of-selection.
*& Form monat_f4
* text
* --> p1 text
* <-- p2 text
form monat_f4 .
data: begin of mf_dynpfields occurs 1.
include structure dynpread.
data: end of mf_dynpfields.
data: mf_returncode like sy-subrc,
mf_monat like isellist-month,
mf_hlp_repid like sy-repid.
field-symbols: <mf_feld>.
* Wert von Dynpro lesen
get cursor field mf_dynpfields-fieldname.
append mf_dynpfields.
mf_hlp_repid = sy-repid.
do 2 times.
call function 'DYNP_VALUES_READ'
exporting
dyname = mf_hlp_repid
dynumb = sy-dynnr
tables
dynpfields = mf_dynpfields
exceptions
invalid_abapworkarea = 01
invalid_dynprofield = 02
invalid_dynproname = 03
invalid_dynpronummer = 04
invalid_request = 05
no_fielddescription = 06
undefind_error = 07.
if sy-subrc = 3.
* Aktuelles Dynpro ist Wertemengenbild
mf_hlp_repid = 'SAPLALDB'.
else.
read table mf_dynpfields index 1.
* Unterstriche durch Blanks ersetzen
translate mf_dynpfields-fieldvalue using '_ '.
exit.
endif.
enddo.
if sy-subrc = 0.
* Konvertierung ins interne Format
call function 'CONVERSION_EXIT_PERI_INPUT'
exporting
input = mf_dynpfields-fieldvalue
importing
output = mf_monat
exceptions
error_message = 1.
if mf_monat is initial.
* Monat ist initial => Vorschlagswert aus akt. Datum ableiten
mf_monat = sy-datlo(6).
endif.
call function 'POPUP_TO_SELECT_MONTH'
exporting
actual_month = mf_monat
importing
selected_month = mf_monat
return_code = mf_returncode
exceptions
factory_calendar_not_found = 01
holiday_calendar_not_found = 02
month_not_found = 03.
if sy-subrc = 0 and mf_returncode = 0.
* ASSIGN (MF_DYNPFIELDS-FIELDNAME) TO <MF_FELD>. " ==>> note 148804
* <MF_FELD> = MF_MONAT.
call function 'CONVERSION_EXIT_PERI_OUTPUT'
exporting
input = mf_monat
importing
output = mf_dynpfields-fieldvalue.
collect mf_dynpfields.
call function 'DYNP_VALUES_UPDATE'
exporting
dyname = mf_hlp_repid
dynumb = sy-dynnr
tables
dynpfields = mf_dynpfields
exceptions
invalid_abapworkarea = 01
invalid_dynprofield = 02
invalid_dynproname = 03
invalid_dynpronummer = 04
invalid_request = 05
no_fielddescription = 06
undefind_error = 07. "<<== note 148804
endif.
endif.
endform. " monat_f4
Regards,
Suresh Datti -
How to display data from internal table in the SELECTION-SCREEN
Hello Experts,
My requirement is to display the data's from an internal table in the selection screen. I tried using selection-screen comment. But it is working only for a single record. Can anyone please tell me how to do this?Hi Ritika,
we cant use write statement inside selection-screen.
see my coding.
SELECTION-SCREEN BEGIN OF SCREEN 123 AS WINDOW TITLE TEXT-456.
SELECTION-SCREEN BEGIN OF BLOCK BL1 WITH FRAME TITLE TEXT-BL1
NO INTERVALS.
SELECT-OPTIONS SEL1 FOR SY-DATUM.
PARAMETERS PAR1(10).
<b>** I WANT ALL RECORDS FROM AN INTERNAL TABLE HERE ONLY</b>
SELECTION-SCREEN END OF BLOCK BL1.
SELECTION-SCREEN PUSHBUTTON 2(10) but1 USER-COMMAND cli1.
SELECTION-SCREEN PUSHBUTTON 20(10) but2 USER-COMMAND cli2.
SELECTION-SCREEN END OF SCREEN 123. -
How to Modify the Selection Screen in Report Painter
Hi All,
I am working on Report painter and writer,
can any body helpme how to change the selection screen i.e i want add some more select options to the exisiting roport .
how can i add more select options to the exisiting one
please let me know the Procedure and provide some relevent documents .
Thanks and Best regards.
umaHello...
In the program ...we can find the following chunk of code..
selection-screen:begin of block B1 with frame title text-001.
Parameters : ....
select-options:.....
selection-screen:end of block b1.
if we need to add any more user inputs we can write the code inside the existing
selection screen....end of block .
or create a new block ..just the block name should be different...
if we are using select options...we need to declare the table name using the key word for the field on which we are giving select options ....
Tables : BSIK.
Please see the following code:
Imagine :- we have the current selection screen..
SELECTION-SCREEN BEGIN OF BLOCK B1 WITH FRAME TITLE TEXT-001.
PARAMETERS: P_BUKRS LIKE BSIK-BUKRS DEFAULT SPACE.
SELECT-OPTIONS: S_LIFNR FOR BSIK-LIFNR.
SELECTION-SCREEN END OF BLOCK B1.
we need to add 2 more fields on the selection screen ..this we can do as the following
SELECTION-SCREEN BEGIN OF BLOCK B1 WITH FRAME TITLE TEXT-001.
PARAMETERS: P_BUKRS LIKE BSIK-BUKRS DEFAULT SPACE.
SELECT-OPTIONS: S_LIFNR FOR BSIK-LIFNR,
S_HKONT FOR BSIK-HKONT.
PARAMETER: P_DATE LIKE BSIK-BUDAT OBLIGATORY DEFAULT
SY-DATUM.
SELECTION-SCREEN END OF BLOCK B1.
OR...create a new block...
SELECTION-SCREEN BEGIN OF BLOCK B2 WITH FRAME TITLE TEXT-002.
SELECT-OPTIONS: S_HKONT FOR BSIK-HKONT.
PARAMETER: P_DATE LIKE RFPDO-ALLGSTID OBLIGATORY DEFAULT
SY-DATUM.
SELECTION-SCREEN END OF BLOCK B2.
there are many options available in selection screens..like creating check box,radio button etc..
for more info press F1 help on the Selection screen in the ABAP editor
Revert back if not clear and reward if helpful
Regards
Byju -
Report should executed based on the radio buttons on the selection screen
Hi everyone,
Greets....................
My scenario is I have 2 selection screen blocks on same screen..
One selection screen block contains input parameters as follows
Company Code - S_BUKRS
Business Area - S_GSBER
Customer Code - S_KUNNR
Fiscal Area - S_GJAHR
GL Account - S_HKONT
Posting Date -S_ZFBDT
Ledger Type -P_RLDNR
Open Item Key Date - P_ZFBDT
Another selection screen block contains 2 radio buttons with the option as follows
Collection Plan
*Credit days summary.
If i click Collection plan the report output should come based on the input parameters in first selection-screen block.
If i click Credit days summary the report output should come based on the input parameters in first selection-screen block.
Pls send me the sample code for this.
Thanks in Advance
Regards
Raj kumarSee the below folling example : it will have radio buttons and depends on radio button it will show output.
REPORT ZPPR_BOM_INFOL_REPORT no standard page heading
line-size 160
line-count 60.
======================================================================
Program Name : ZPPR_BOM_INFOL_REPORT
Description : This Program would be used for BOM List for a material*
and the component's where used list *
Author : Seshu *
Date : 07/24/2006 *
MODIFICATION HISTORY *
DATE | AUTHOR | CHANGE # | DESCRIPTION OF MODIFICATION *
|----
|----
|----
*12/04/06 | Seshu | DEVK921821 | Removed new page for each material *
======================================================================
Table definition *
TABLES: mast,
stko,
stpo,
T418,
makt.
TYPE - POOLS
TYPE-POOLS: slis.
Constants
constants : c_tcode(4) type c value 'CS03',
gc_formname_top_of_page TYPE slis_formname
VALUE 'TOP_OF_PAGE'.
Variables
data : v_maktx like makt-maktx,
wa_stko like stko.
DATA:
Objekttyp 'Material'
otyp_mat(1) TYPE c VALUE '1',
ootyp_mat(1) TYPE c VALUE 'M',
Objekttyp 'kein Objekt'
otyp_noo(1) TYPE c VALUE '2',
Objekttyp 'Dokument'
otyp_doc(1) TYPE c VALUE '3',
Objekttyp 'Klasse'
otyp_kla(1) TYPE c VALUE '4',
Objekttyp 'Intramaterial'
otyp_ntm(1) TYPE c VALUE '5'.
maximal anzeigbare Menge
data: max_num(7) TYPE p DECIMALS 3 VALUE '9999999999.999',
ueberl_kz(1) TYPE c VALUE '*',
min_num(7) TYPE p DECIMALS 3 VALUE '9999999999.999-',
b_flag(1) TYPE c VALUE 'X',
ecfld(250) TYPE c,
v_flag type c.
ALV Variables
DATA: gt_fieldcat TYPE slis_t_fieldcat_alv,
gs_layout TYPE slis_layout_alv,
gs_keyinfo TYPE slis_keyinfo_alv,
gt_sp_group TYPE slis_t_sp_group_alv,
gt_events TYPE slis_t_event.
DATA: g_repid LIKE sy-repid.
DATA: gt_list_top_of_page TYPE slis_t_listheader,
g_tabname_header TYPE slis_tabname,
g_tabname_item TYPE slis_tabname,
g_save(1) TYPE c,
gx_variant LIKE disvariant,
g_variant LIKE disvariant,
g_default(1) TYPE c,
g_exit(1) TYPE c.
Includes *
INCLUDE .
Internal Table Declaration *
DATA: t_mast LIKE STANDARD TABLE OF mast WITH HEADER LINE.
*DATA: t_makt LIKE STANDARD TABLE OF makt WITH HEADER LINE.
BOM Function module Related
DATA: t_matcat LIKE cscmat OCCURS 0 WITH HEADER LINE.
Internal Table for Level by Level Function module
DATA: t_stb LIKE stpox OCCURS 0 WITH HEADER LINE.
Get the Relevant data from FM
DATA: BEGIN OF hd_tab OCCURS 0,
stufe LIKE stpox-stufe,
vwegx LIKE stpox-vwegx,
END OF hd_tab.
Final Output
DATA: BEGIN OF alv_stb OCCURS 0.
INCLUDE STRUCTURE stpox_alv.
DATA: info(3) TYPE c,
END OF alv_stb.
DATA: BEGIN OF stb_orig.
INCLUDE STRUCTURE stpox.
DATA: END OF stb_orig.
DATA: BEGIN OF stb_add.
INCLUDE STRUCTURE stpol_add.
DATA: END OF stb_add.
Internal Table for STPO
*-- BOM Line item
TYPES: BEGIN OF ty_stpo,
stlty TYPE stpo-stlty,
stlnr TYPE stpo-stlnr,
stlkn TYPE stpo-stlkn,
stpoz TYPE stpo-stpoz,
idnrk TYPE stpo-idnrk,
meins TYPE stpo-meins,
menge TYPE stpo-menge, "Component Qty
END OF ty_stpo.
DATA: t_stpo TYPE STANDARD TABLE OF ty_stpo WITH HEADER LINE.
*-- BOM Header
TYPES: BEGIN OF ty_stko,
stlty TYPE stko-stlty,
stlnr TYPE stko-stlnr,
stlal TYPE stko-stlal,
stkoz TYPE stko-stkoz,
bmein TYPE stko-bmein,
bmeng TYPE stko-bmeng,
END OF ty_stko.
DATA: t_stko TYPE STANDARD TABLE OF ty_stko WITH HEADER LINE .
data : t_makt like makt occurs 0 with header line.
DATA: BEGIN OF cl_clstab OCCURS 0, "YHG079407
class LIKE klah-class, "YHG079407
klart LIKE klah-klart, "YHG079407
chked LIKE csdata-xfeld, "YHG079407
noobj LIKE csdata-xfeld, "YHG079407
dsply LIKE csdata-xfeld, "YHG079407
END OF cl_clstab.
*-- Header table
TYPES: BEGIN OF ty_main_material,
matnr TYPE mast-matnr, "Material
werks TYPE mast-werks, "Plant
maktx TYPE makt-maktx, "Description
stlal TYPE mast-stlal, "Alternative BOM
stlnr TYPE stko-stlnr, "BOM Number
bmein TYPE stko-bmein, "UOM
bmeng TYPE stko-bmeng, "Base Qty
expand(1) TYPE c, "Expanding Field
END OF ty_main_material.
DATA: t_main_material TYPE STANDARD TABLE OF ty_main_material WITH
HEADER LINE.
*-- Item (Component) Table
TYPES: BEGIN OF ty_item_material,
matnr TYPE mast-matnr, "Material
werks TYPE mast-werks, "Plant
idnrk TYPE stpo-idnrk, "Component (Material)
maktx TYPE makt-maktx, "Description
stlal TYPE mast-stlal, "Alternative BOM
stlnr TYPE stpo-stlnr, "BOM Number
meins TYPE stpo-meins, "UOM
menge TYPE stpo-menge, "Base Qty
END OF ty_item_material.
DATA: t_item_material TYPE STANDARD TABLE OF ty_item_material WITH
HEADER LINE.
Selection Screen *
SELECTION-SCREEN BEGIN OF BLOCK b1 WITH FRAME TITLE text-001.
PARAMETERS: p_werks LIKE marc-werks DEFAULT '1000' OBLIGATORY.
SELECT-OPTIONS s_stlal FOR mast-stlal .
SELECT-OPTIONS s_stlan FOR mast-stlan DEFAULT '1'.
SELECTION-SCREEN SKIP.
SELECTION-SCREEN BEGIN OF BLOCK b2 WITH FRAME TITLE text-002.
SELECTION-SCREEN SKIP.
PARAMETERS: p_bomlst RADIOBUTTON GROUP g1 DEFAULT 'X'.
SELECT-OPTIONS s_matnr FOR mast-matnr.
SELECTION-SCREEN SKIP.
PARAMETERS: p_compon RADIOBUTTON GROUP g1.
SELECT-OPTIONS: s_idnrk FOR stpo-idnrk.
SELECTION-SCREEN END OF BLOCK b2.
SELECTION-SCREEN END OF BLOCK b1.
selection-screen begin of block b03 with frame title text-b03.
selection-screen begin of line.
selection-screen comment 1(40) text-005.
parameters: p_all radiobutton group r1 default 'X'.
selection-screen end of line.
selection-screen begin of line.
selection-screen comment 1(40) text-006.
parameters: p_one radiobutton group r1 .
selection-screen end of line.
selection-screen end of block b03.
SELECTION-SCREEN BEGIN OF BLOCK b3 WITH FRAME TITLE text-003.
PARAMETERS: p_vari LIKE disvariant-variant.
SELECTION-SCREEN END OF BLOCK b3.
At slection screen events *
*-- Process on value request
AT SELECTION-SCREEN ON VALUE-REQUEST FOR p_vari.
PERFORM f4_for_variant.
Intitialisation
INITIALIZATION.
g_repid = sy-repid.
g_tabname_header = 'T_MAIN_MATERIAL'.
g_tabname_item = 'T_ITEM_MATERIAL'.
*-- define keyinformation
CLEAR gs_keyinfo.
gs_keyinfo-header01 = 'MATNR'.
gs_keyinfo-item01 = 'MATNR'.
PERFORM e03_eventtab_build USING gt_events[].
PERFORM e04_comment_build USING gt_list_top_of_page[].
PERFORM e07_sp_group_build USING gt_sp_group[].
PERFORM e08_layout_build USING gs_layout.
Set Options: save variants userspecific or general
g_save = 'A'.
PERFORM variant_init.
Get default variant
gx_variant = g_variant.
CALL FUNCTION 'REUSE_ALV_VARIANT_DEFAULT_GET'
EXPORTING
i_save = g_save
CHANGING
cs_variant = gx_variant
EXCEPTIONS
not_found = 2.
IF sy-subrc = 0.
p_vari = gx_variant-variant.
ENDIF.
S T A R T - O F - S E L E C T I O N *******************
start-of-selection.
if p_all = 'X'.
Get the data from MAST and MAKT Table
if p_bomlst = 'X'.
Get the data Based On Material #
perform get_data.
else.
Get the data Based On Component
perform get_data_component.
endif.
else.
Get the Single Level Report
*-- Moved the fiedl catalog here inorder to change the layout based on
*-- Selection
PERFORM e01_fieldcat_init USING gt_fieldcat[].
PERFORM select_data.
endif.
E N D - O F - S E L E C T I O N *******************
end-of-selection.
if p_one = 'X'.
perform alv.
endif.
User Command
at line-selection.
Interactive to CS03 Transaction
case sy-ucomm.
when 'PICK' or 'F2'.
if not alv_stb-idnrk is initial .
if not alv_stb-werks is initial.
if not alv_stb-objty is initial.
SET PARAMETER ID 'MAT' FIELD alv_stb-idnrk.
SET PARAMETER ID 'WRK' FIELD alv_stb-werks.
SET PARAMETER ID 'CSV' FIELD alv_stb-OBJTY.
call transaction c_tcode and skip first screen.
endif.
endif.
endif.
clear alv_stb.
endcase.
*& Form get_data
Get data from MAST and MAKT Table
FORM get_data.
data : wa_lines type sy-index.
REFRESH : T_MAST,
t_STB,
t_MATCAT,
alv_STB.
CLEAR : T_MAST,
t_STB,
t_MATCAT,
alv_STB.
Get the data from MAST Table
Get all the information from MAST - BOM Table
SELECT * FROM mast INTO TABLE t_mast WHERE matnr IN s_matnr AND
werks = p_werks AND
stlan IN s_stlan AND
stlal IN s_stlal.
describe table t_mast lines wa_lines.
if wa_lines is initial.
Write:/2 'List contains no data'.
stop.
endif.
loop at t_mast.
clear : v_maktx.
Start of change Seshu
Reason - Remove the new page option
if sy-tabix ne 1.
skip 1.
endif.
End of Change Seshu
Get the material Description
select single maktx from makt into v_maktx
where matnr = t_mast-matnr
and spras = 'E'.
Get the material details from STKO Table
select single * from stko into wa_stko
where STLTY = 'M'
and STLNR = t_mast-stlnr
and STLAL = t_mast-stlal.
Main Header for Each Material
format color 5 on.
write:/2 'Material',20 'Material Description',65 'Alternative BOM',
90 'Base Qty', 115 'Base Unit'.
format color 5 off.
format color 1 on.
write:/2 t_mast-matnr,20 v_maktx,65 wa_stko-STLAL, 85 wa_stko-BMENG,
115 wa_stko-BMEIN.
format color 1 off.
Use the Function Module and get the format level by level
perform get_level_level.
endloop.
ENDFORM. " get_data
Top of page *
top-of-page.
perform report_header .
*& Form report_header
text
--> p1 text
<-- p2 text
FORM report_header.
new-page line-size 160 .
format color col_heading intensified on.
write:/ sy-uline(160) .
*--- Write Company Name.
perform calc_col_and_write using text-h00
sy-linsz.
*--- Write Report Title.
perform calc_col_and_write using sy-title
sy-linsz.
*--- Write User Id, Date / Time, Program Id, Page etc.
perform write_other_hdr_details.
write:/ sy-uline(160) .
ENDFORM. " report_header
*& Form calc_col_and_write
text
-->P_TEXT_H00 text
-->P_SY_LINSZ text
FORM calc_col_and_write USING P_TEXT
P_LINSZ.
data: col1 type i,
col2 type i,
len type i,
str type i.
str = strlen( p_text ).
col1 = ( p_linsz / 2 ) - ( str / 2 ) .
len = p_linsz - col1 - 2.
write: at /1 '|'.
write: at col1 p_text,
at sy-colno(len) space.
write at 160 '|'.
ENDFORM. " calc_col_and_write
*& Form write_other_hdr_details
text
--> p1 text
<-- p2 text
FORM write_other_hdr_details.
data: col1 type i,
col2 type i,
len type i.
col1 = 3.
write:/1 '|'.
write: at col1 'UserId : ',
sy-uname.
len = sy-linsz - 1.
write at sy-colno(len) space.
col2 = sy-linsz - 18.
write: at col2 'Date: ',
sy-datum mm/dd/yyyy.
write: at sy-linsz '|'.
write:/1 '|'.
write: at col1 'ReportId: ',
sy-repid.
write at sy-colno(len) space.
col2 = sy-linsz - 18.
write: at col2 'Page: ',
sy-pagno.
write: at sy-linsz '|'.
ENDFORM. " write_other_hdr_details
*& Form get_data_component
Get the data based on Component level
FORM get_data_component.
data wa_lines type i.
*-- Get the BOM item details
SELECT stlty stlnr stlkn stpoz idnrk meins menge
FROM stpo
INTO TABLE t_stpo
WHERE idnrk IN s_idnrk.
IF sy-subrc = 0.
CLEAR wa_lines.
DESCRIBE TABLE t_stpo LINES wa_lines.
IF wa_lines > 0.
SELECT stlty stlnr stlal stkoz bmein bmeng
FROM stko
INTO TABLE t_stko
FOR ALL ENTRIES IN t_stpo
WHERE stlnr = t_stpo-stlnr.
CLEAR wa_lines.
DELETE ADJACENT DUPLICATES FROM t_stko COMPARING ALL FIELDS.
DESCRIBE TABLE t_stko LINES wa_lines.
IF wa_lines > 0.
*-- Get the BOM item details
SELECT * FROM mast INTO TABLE t_mast FOR ALL ENTRIES IN t_stko
WHERE werks = p_werks AND
stlnr = t_stko-stlnr
and stlal in s_stlal.
ENDIF.
ENDIF.
else.
Write:/2 'List contains no data'.
stop.
endif.
loop at t_mast.
clear : v_maktx.
Start of change Seshu
Reason - Remove the new page option
if sy-tabix ne 1.
skip 1.
endif.
End of change Seshu
Get the material Description
select single maktx from makt into v_maktx
where matnr = t_mast-matnr
and spras = 'E'.
Get the material details from STKO Table
select single * from stko into wa_stko
where STLTY = 'M'
and STLNR = t_mast-stlnr
and STLAL = t_mast-stlal.
Main Header for Each Material
format color 5 on.
write:/2 'Material',20 'Material Description',65 'Alternative BOM',
90 'Base Qty', 115 'Base Unit'.
format color 5 off.
format color 1 on.
write:/2 t_mast-matnr,20 v_maktx,65 wa_stko-STLAL, 85 wa_stko-BMENG,
115 wa_stko-BMEIN.
format color 1 off.
Use the Function Module and get the format level by level
perform get_level_level.
clear : t_mast.
endloop.
ENDFORM. " get_data_component
*& Form obj_ident
text
FORM obj_ident.
weder Mat noch Doc
CHECK: T_stb-objty NE otyp_mat,
T_stb-objty NE ootyp_mat,
T_stb-objty NE otyp_doc,
T_stb-objty NE otyp_ntm.
?T418-WA schon ok
nein
IF T_stb-postp NE t418-postp.
T418 einlesen
PERFORM t418_lesen USING T_stb-postp.
ENDIF.
PERFORM cl_clstab_maint.
?MatNr-Eingabe bei diesem PosTyp moeglich
und keine Textposition
trifft zu
IF t418-matin NE '-'
AND t418-txpos IS INITIAL.
aktuelles Objekt ist Material NLAG
T_stb-objty = '1'.
PosKurztext in ObjKurztext uebernehmen.
T_stb-ojtxp = T_stb-potx1.
MODIFY T_stb.
ELSE.
IF T_stb-objty IS INITIAL.
T_stb-objty = '2'.
MODIFY T_stb.
ENDIF.
ENDIF.
ENDFORM. " obj_ident
*& Form t418_lesen
text
-->P_T_STB_POSTP text
FORM t418_lesen USING lkl_postp LIKE stpo-postp.
T418-WA initialisieren
CLEAR:
t418.
Key angeben
t418-postp = lkl_postp.
PosTypDefinition lesen
READ TABLE t418.
ENDFORM. " t418_lesen
*& Form cl_clstab_maint
text
FORM cl_clstab_maint.
nur fuer Klassenpositionen
CHECK t_STB-OBJTY EQ OTYP_KLA.
Teilkey der Klassenpositionentabelle
CL_CLSTAB-CLASS = t_STB-CLASS.
CL_CLSTAB-KLART = t_STB-KLART.
Klassenpositionentabelle lesen
READ TABLE CL_CLSTAB
WITH KEY CL_CLSTAB(21)
BINARY SEARCH.
aktuelle Klassenposition bereits in Klassenpositionentabelle
nein
IF SY-SUBRC <> 0.
Klassenposition in Klassenpositionentabelle hinzufuegen
INSERT CL_CLSTAB INDEX SY-TABIX.
ENDIF.
ENDFORM. " cl_clstab_maint
*& Form alv_stb_prep
Printing the data as LEVEL BY LEVEL
FORM alv_stb_prep.
CLEAR:
alv_stb,
stb_orig,
stb_add.
IF t_stb-hdnfo IS INITIAL.
stb_orig = t_stb.
IF t_stb-mngko >= max_num.
stb_add-ovfls = ueberl_kz.
ELSE.
IF t_stb-mngko <= min_num.
stb_add-ovfls = ueberl_kz.
ELSE.
CLEAR: stb_add-ovfls.
ENDIF.
ENDIF.
IF NOT t_stb-xtlnr IS INITIAL.
stb_add-bomfl = b_flag.
ENDIF.
IF NOT t_stb-knobj IS INITIAL
OR NOT t_stb-class IS INITIAL
OR NOT t_stb-kzclb IS INITIAL.
stb_add-knofl = 'X'.
ENDIF.
ELSE.
CHECK t_stb-stufe > 1.
alv_stb-info = 'C30'.
IF t_stb-ttidx <> t_matcat-index.
READ TABLE t_matcat INDEX t_stb-ttidx.
ENDIF.
stb_orig-hdnfo = t_stb-hdnfo.
stb_orig-stufe = t_stb-stufe - 1 .
stb_orig-ojtxp = t_stb-ojtxb.
IF NOT t_stb-altst IS INITIAL.
stb_orig-stlal = t_stb-stlal.
IF stb_orig-stlal(1) EQ '0'.
stb_orig-stlal(1) = ' '.
ENDIF.
ENDIF.
stb_orig-idnrk = t_matcat-matnr.
ENDIF.
CLEAR:
stb_add-dobjt,
stb_add-objic.
CASE t_stb-objty.
WHEN otyp_mat.
WRITE: stb_orig-idnrk TO ecfld.
stb_add-objic = '@A6@'.
WHEN 'M'.
WRITE: stb_orig-idnrk TO ecfld.
stb_add-objic = '@A6@'.
WHEN otyp_noo.
WRITE: stb_orig-potx1 TO ecfld.
stb_add-objic = '@0Q@'.
WHEN otyp_doc.
write stb_orig-doknr to ecfld. "note 489354
IF ecfld CP '*# '. ENDIF. "note 489354
sy-fdpos = sy-fdpos + 1. "note 489354
CONCATENATE
*d stb_orig-doknr "note 489354
stb_orig-dokar
stb_orig-doktl
stb_orig-dokvr
*d INTO ecfld "note 489354
INTO ecfld+sy-fdpos "note 489354
SEPARATED BY space.
stb_add-objic = '@AR@'.
WHEN otyp_kla.
CONCATENATE
stb_orig-class
stb_orig-klart
INTO ecfld
SEPARATED BY space.
stb_add-objic = '@7C@'.
WHEN otyp_ntm.
WRITE: stb_orig-intrm TO ecfld.
WHEN OTHERS.
ENDCASE.
*d CONDENSE ecfld. "note 515408
stb_add-dobjt = ecfld(40).
CLEAR: ecfld.
WRITE stb_orig-stufe TO stb_add-dstuf NO-SIGN.
*d MOVE-CORRESPONDING stb_orig TO alv_stb. "note 331962
MOVE-CORRESPONDING stb_add TO alv_stb.
MOVE-CORRESPONDING stb_orig TO alv_stb. "note 331962
APPEND alv_stb.
ENDFORM. " alv_stb_prep
*& Form get_level_level
text
FORM get_level_level.
REFRESH : T_STB,
T_MATCAT,
ALV_STB.
CLEAR : T_STB,
T_MATCAT,
ALV_STB.
CALL FUNCTION 'CS_BOM_EXPL_MAT_V2'
EXPORTING
capid = 'PP01'
datuv = sy-datum
mktls = 'X'
mehrs = 'X'
mtnrv = t_mast-matnr
stlal = '01'
stlan = '1'
stpst = 0
svwvo = 'X'
werks = p_werks
vrsvo = 'X'
TABLES
stb = t_stb
matcat = t_matcat
EXCEPTIONS
alt_not_found = 1
call_invalid = 2
material_not_found = 3
missing_authorization = 4
no_bom_found = 5
no_plant_data = 6
no_suitable_bom_found = 7
conversion_error = 8
OTHERS = 9.
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
CLEAR: hd_tab.
Entry der KlassenstatusTab. initialisieren
cl_clstab,
Entry 'Objekte von Klassen' initialisieren
cl_objmemo.
REFRESH: hd_tab.
SORT t_matcat BY index ASCENDING.
Get the All levels
loop at t_stb.
IF NOT t_stb-hdnfo IS INITIAL.
EXIT.
ENDIF.
Object Identification
PERFORM obj_ident.
READ TABLE hd_tab
WITH KEY stufe = t_stb-stufe
vwegx = t_stb-vwegx
BINARY SEARCH
TRANSPORTING NO FIELDS.
?gibt es diesen Satz schon
nein
IF sy-subrc <> 0.
dann in SFP-Infosatzverweistab. aufnehmen
*d APPEND HD_TAB. "HGH054648
hd_tab-stufe = t_stb-stufe.
"HGH054648
hd_tab-vwegx = t_stb-vwegx.
"HGH054648
INSERT hd_tab "HGH054648
INTO hd_tab "HGH054648
INDEX sy-tabix. "HGH054648
PosNr initialisieren
CLEAR: t_stb-posnr.
SFP-InfosatzKz setzen
t_stb-hdnfo = 'X'.
stb-objty = otyp_mat.
"HGE246532
als SFP-Infosatz in die STB aufnehmen
append t_stb.
ENDIF.
*del ENDIF.
clear t_stb.
endloop.
SORT t_stb ASCENDING BY stufe
index ASCENDING
*del POSNR ASCENDING. "HGC062735
posnr ASCENDING "HGC062735
hdnfo DESCENDING.
LOOP AT t_stb.
T_stb-index = sy-tabix.
MODIFY T_stb.
PERFORM alv_stb_prep.
ENDLOOP.
Displays the Value as Level by Level
loop at ALV_stb.
if sy-tabix = 1.
format color 3 on.
write:/2 'Level',12 'Item',22 'Component',
42 'Material Description',82 'Base Qty',
107 'Base Unit',120 'Assembly Indicator'.
format color 3 on.
endif.
if alv_stb-MEINs is initial.
v_flag = 'X'.
endif.
if v_flag = 'X'.
format color 5 on.
write:/2 ALV_stb-STUFE,12 alv_stb-posnr,22 alv_stb-idnrk,
42 alv_stb-OJTXP.
format color 1 off.
else.
if alv_stb-STUFE = '1'.
format color 1 on.
write:/2 ALV_stb-STUFE,12 alv_stb-posnr,22 alv_stb-idnrk,
42 alv_stb-OJTXP,72 alv_stb-mngko,
107 alv_stb-MEINs, 120 alv_stb-bomfl .
format color 1 off.
elseif alv_stb-STUFE = '2'.
format color 2 on.
write:/2 alv_stb-STUFE,12 alv_stb-posnr,22 alv_stb-idnrk,
42 alv_stb-OJTXP,72 alv_stb-mngko,
107 alv_stb-MEINs,120 alv_stb-bomfl.
format color 2 off.
elseif alv_stb-STUFE = '3'.
format color 3 on.
write:/2 alv_stb-STUFE,12 alv_stb-posnr,22 alv_stb-idnrk,
42 alv_stb-OJTXP,72 alv_stb-mngko,
107 alv_stb-MEINs,120 alv_stb-bomfl .
format color 3 off.
elseif alv_stb-STUFE = '4'.
format color 4 on.
write:/2 alv_stb-STUFE,12 alv_stb-posnr,22 alv_stb-idnrk,
42 alv_stb-OJTXP,72 alv_stb-mngko,
107 alv_stb-MEINs,120 alv_stb-bomfl .
format color 4 off.
elseif alv_stb-STUFE = '5'.
format color 5 on.
write:/2 alv_stb-STUFE,12 alv_stb-posnr,22 alv_stb-idnrk,
42 alv_stb-OJTXP,72 alv_stb-mngko,
107 alv_stb-MEINs,120 alv_stb-bomfl .
format color 5 off.
elseif alv_stb-STUFE = '6'.
format color 7 on.
write:/2 alv_stb-STUFE,12 alv_stb-posnr,22 alv_stb-idnrk,
42 alv_stb-OJTXP,72 alv_stb-mngko,
107 alv_stb-MEINs,120 alv_stb-bomfl.
format color 6 off.
elseif alv_stb-STUFE = '7'.
format color 7 on.
write:/2 alv_stb-STUFE,12 alv_stb-posnr,22 alv_stb-idnrk,
42 alv_stb-OJTXP,72 alv_stb-mngko,
107 alv_stb-MEINs,120 alv_stb-bomfl .
format color 7 off.
else.
format color 1 on.
write:/2 alv_stb-STUFE,12 alv_stb-posnr,22 alv_stb-idnrk,
42 alv_stb-OJTXP,72 alv_stb-mngko,
107 alv_stb-MEINs,120 alv_stb-bomfl .
format color 1 off.
endif.
endif.
hide: alv_stb.
clear : alv_stb.
clear v_flag.
endloop.
ENDFORM. " get_level_level
*& Form f4_for_variant
text
FORM f4_for_variant.
CALL FUNCTION 'REUSE_ALV_VARIANT_F4'
EXPORTING
is_variant = g_variant
i_save = g_save
i_tabname_header = g_tabname_header
i_tabname_item = g_tabname_item
it_default_fieldcat =
IMPORTING
e_exit = g_exit
es_variant = gx_variant
EXCEPTIONS
not_found = 2.
IF sy-subrc = 2.
MESSAGE ID sy-msgid TYPE 'S' NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ELSE.
IF g_exit = space.
p_vari = gx_variant-variant.
ENDIF.
ENDIF.
ENDFORM. " f4_for_variant
FORM E03_EVENTTAB_BUILD *
--> E03_LT_EVENTS *
FORM e03_eventtab_build USING e03_lt_events TYPE slis_t_event.
DATA: ls_event TYPE slis_alv_event.
CALL FUNCTION 'REUSE_ALV_EVENTS_GET'
EXPORTING
i_list_type = 0
IMPORTING
et_events = e03_lt_events.
READ TABLE e03_lt_events WITH KEY name = slis_ev_top_of_page
INTO ls_event.
IF sy-subrc = 0.
MOVE gc_formname_top_of_page TO ls_event-form.
APPEND ls_event TO e03_lt_events.
ENDIF.
ENDFORM.
FORM E04_COMMENT_BUILD *
--> E04_LT_TOP_OF_PAGE -
Problem in enabling the selection screen
Hi ,
I have problem in enabling the selection screen.
i have radio button and based on the radio button i need to make the date field as mandatory.
When i tried this with at selection screen on radio button group XXX, itu2019s not triggering.
Could you please help me by resolving the above problem?
VijayHi,
see the sap documentation
... RADIOBUTTON GROUP group [USER-COMMAND fcode]
Effect:
This addition specifies that the input field is displayed as a radio button in the first position on the selection screen, and the output field is displayed next to it on the right. The radio button is selected if the value of para is "X" or "x". Otherwise, it is not selected.
group is used to define the radio button group for the parameter. The name group is entered directly as a character string with a maximum of 4 characters. Within a selection screen, there must be a minimum of two parameters in the same radio button group. There cannot be more than one radio button group with the same name in one program, even if they are defined in different selection screens.
The parameter must be specified with the type c and length 1. Explicit length specification using len is not permitted. If the addition TYPE is used, it can only be followed by the generic type c or a non-generic data type of type
In a radio button group, only one parameter can be defined with the addition DEFAULT, and the specified value must be "X". By default, the first parameter in a radio button group is set to the value "X", and the rest are set to " ".
The addition USER-COMMAND can be used to assign a function code fcode to the first parameter in a radio button group. The function code fcode must be specified directly, and have a maximum length of 20 characters. To evaluate the function code, an interface work area of the structure SSCRFIELDS from the ABAP Dictionary must be declared using the statement TABLES. When the user selects any radio button of the radio button group on the selection screen, the runtime environment triggers the event AT SELECTION-SCREEN and transfers the function code fcode to the component ucomm of the interface work area sscrfields. If a function code used in the GUI status of the selection screen is specified for fcode, the selection screen processing is affected accordingly.
Note:
It is recommended to define the radio buttons of a radio button group directly underneath each other. If the selection screen also contains other elements, it is recommended to define each radio button group within a block surrounded by a frame.
Regards,
Venkatesh -
Can I define a vertical SELECTION-SCREEN block ?
Hi, I started getting to know the SELECTION-SCREEN statements now, I was wondering if there's a way to define a vertical screen block instead of an horizontal one.
Also, can I set the size of a given block ? Let's say I don't want it to extend to the right margin of the screen. Can I limit it to the middle, for instance ?
Here's a code excerpt so you can understand a little what I'm intending to do (I want to place the operators vertically on the screen).
SELECTION-SCREEN BEGIN OF BLOCK BOX1 WITH FRAME TITLE S_TBOX1.
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 20(10) S_COMM.
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN BEGIN OF BLOCK BOX2 WITH FRAME TITLE S_TBOX2.
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN PUSHBUTTON (3) S_PB1 USER-COMMAND 'XXX'.
SELECTION-SCREEN PUSHBUTTON (3) S_PB2 USER-COMMAND 'XXX'.
SELECTION-SCREEN PUSHBUTTON (3) S_PB3 USER-COMMAND 'XXX'.
SELECTION-SCREEN PUSHBUTTON (3) S_PB4 USER-COMMAND 'XXX'.
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN END OF BLOCK BOX2.
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN PUSHBUTTON (3) S_PB5 USER-COMMAND 'XXX'.
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN END OF BLOCK BOX1.
INITIALIZATION.
S_COMM = 'CALCULATOR'.Ok, I thought of that but... now I need the answer for the 2nd question I posted: is it possible to limit the extension of the block, so it ends right after the 4 buttons column ?
SELECTION-SCREEN BEGIN OF BLOCK BOX1 WITH FRAME TITLE S_TBOX1.
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 20(10) S_COMM.
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN BEGIN OF BLOCK BOX2 WITH FRAME TITLE S_TBOX2.
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN PUSHBUTTON (3) S_PB1 USER-COMMAND 'XXX'.
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN SKIP.
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN PUSHBUTTON (3) S_PB2 USER-COMMAND 'XXX'.
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN SKIP.
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN PUSHBUTTON (3) S_PB3 USER-COMMAND 'XXX'.
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN SKIP.
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN PUSHBUTTON (3) S_PB4 USER-COMMAND 'XXX'.
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN END OF BLOCK BOX2.
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN PUSHBUTTON (3) S_PB5 USER-COMMAND 'XXX'.
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN END OF BLOCK BOX1.
INITIALIZATION.
S_COMM = 'CALCULATOR'. -
Dynamic Selection option in the selection screen
Hi ,
I have a requirement like this ....
The user wants some fields to be default available in the selection screen. But they also want to be able to select the data based on additional fields (all the remaining fields ) which they want to see in the dynamic selection .
The basic list for selections should be limited to the fields listed in the specifications provided to me and the remaining fields should be made available through the dynamic selection option.
In the transaction FBL3N , this facility is provided.
Kindly help me with this..
thanks,
Sumit .Hi Sumit,
To include dynamic selection check this sample code.
TYPE POOLS DECLARATIONS FOR VALUE REQUEST MANAGER AND ICONS
TYPE-POOLS : vrm,
icon.
*SELECTION SCREEN FIELDS
TABLES : sscrfields.*GLOBAL DECLARATIONS
DATA : flag TYPE c,
tablename(10),
mmtable LIKE dd02l-tabname,
sdtable LIKE dd02l-tabname,
hrtable LIKE dd02l-tabname.*DECLARATIONS FOR SELECTION SCREEN STATUS
DATA it_ucomm TYPE TABLE OF sy-ucomm.***********SELECTION-SCREENS**********************
SELECTION-SCREEN BEGIN OF BLOCK blk1 WITH FRAME.*FOR DYNAMIC DISPLAY OF MODULES
PARAMETERS : pa RADIOBUTTON GROUP rad USER-COMMAND com MODIF ID mod,
pb RADIOBUTTON GROUP rad MODIF ID rad,
pc RADIOBUTTON GROUP rad MODIF ID cad.SELECTION-SCREEN SKIP.**TO INCLUDE DYNAMIC ICONS
SELECTION-SCREEN COMMENT 2(6) text_001.*DYNAMIC LIST BOX BASED ON USER SELECTIONS
PARAMETERS one AS LISTBOX VISIBLE LENGTH 20 MODIF ID mod.
PARAMETERS two AS LISTBOX VISIBLE LENGTH 20 MODIF ID rad.
PARAMETERS three AS LISTBOX VISIBLE LENGTH 20 MODIF ID cad.SELECTION-SCREEN END OF BLOCK blk1.*DISPLAY DYNAMIC PUSHBUTTON ON APP TOOLBAR ON USER CLICKS
SELECTION-SCREEN: FUNCTION KEY 1,
FUNCTION KEY 2,
FUNCTION KEY 3.**EVENT ON SELECTION SCREEN FOR OUTPUT DISPLAY
AT SELECTION-SCREEN OUTPUT.*CLICK OF FIRST RADIO BUTTON
IF pa = 'X'.
sscrfields-functxt_01 = 'Materials Management'.
WRITE icon_plant AS ICON TO text_001.
*CODE TO GET DYNAMICS BASED ON THE SELECTED RADIO
LOOP AT SCREEN.
IF screen-group1 = 'MOD'.
screen-intensified = '1'.
screen-active = 1.
screen-display_3d = '1'.
MODIFY SCREEN.
ENDIF.
IF screen-group1 = 'RAD'.
screen-intensified = '0'.
screen-active = 0.
screen-display_3d = '0'.
MODIFY SCREEN.
ENDIF.
IF screen-group1 = 'CAD'.
screen-intensified = '0'.
screen-active = 0.
screen-display_3d = '0'.
MODIFY SCREEN.
ENDIF.
ENDLOOP.
ENDIF.*CLICK OF SECOND RADIO
IF pb = 'X'.
sscrfields-functxt_02 = 'Sales And Distribution'.
WRITE icon_ws_ship AS ICON TO text_001.
LOOP AT SCREEN.
IF screen-group1 = 'RAD'.
screen-intensified = '1'.
screen-active = 1.
screen-display_3d = '1'.
MODIFY SCREEN.
ENDIF.
IF screen-group1 = 'MOD'.
screen-intensified = '0'.
screen-active = 0.
screen-display_3d = '0'.
MODIFY SCREEN.
ENDIF.
IF screen-group1 = 'CAD'.
screen-intensified = '0'.
screen-active = 0.
screen-display_3d = '0'.
MODIFY SCREEN.
ENDIF.
ENDLOOP.
ENDIF.*CLICK OF THIRD RADIO
IF pc = 'X'.
sscrfields-functxt_03 = 'Human Resources'.
WRITE icon_new_employee AS ICON TO text_001.
LOOP AT SCREEN.
IF screen-group1 = 'RAD'.
screen-intensified = '0'.
screen-active = 0.
screen-display_3d = '0'.
MODIFY SCREEN.
ENDIF.
IF screen-group1 = 'MOD'.
screen-intensified = '0'.
screen-active = 0.
screen-display_3d = '0'.
MODIFY SCREEN.
ENDIF.
IF screen-group1 = 'CAD'.
screen-intensified = '1'.
screen-active = 1.
screen-display_3d = '1'.
MODIFY SCREEN.
ENDIF.
ENDLOOP.
ENDIF.*CUSTOMISING THE TOOLBARS OF THE SELECTION SCREEN
*WITH F8 BUTTON DISABLED APPEND : 'PRIN' TO it_ucomm,
'SPOS' TO it_ucomm,
'ONLI' TO it_ucomm. CALL FUNCTION 'RS_SET_SELSCREEN_STATUS'
EXPORTING
p_status = sy-pfkey
TABLES
p_exclude = it_ucomm.
**EVENT ON THE SELECTION
AT SELECTION-SCREEN.* LIST BOX ONE VALUES
CASE one.
WHEN '1'.
mmtable = 'MARC'.
WHEN '2'.
mmtable = 'MARA'.
WHEN '3'.
mmtable = 'MARD'.
WHEN '4'.
mmtable = 'MARM'.
ENDCASE.* LIST BOX TWO VALUES
CASE two.
WHEN '1'.
sdtable = 'VBAK'.
WHEN '2'.
sdtable = 'VBAP'.
WHEN '3'.
sdtable = 'VBUK'.
WHEN '4'.
sdtable = 'VBUP'.
ENDCASE.* LIST BOX THREE VALUES
CASE three.
WHEN '1'.
hrtable = 'PA0001'.
WHEN '2'.
hrtable = 'PA0006'.
WHEN '3'.
hrtable = 'PA0022'.
WHEN '4'.
hrtable = 'PA0008'.
ENDCASE.*VALUES FOR CLICK OF THE PUSHBUTTON ON APP TOOLBAR
*AND ENABLING THE BUTTONS TO PERFORM F8
CASE sscrfields-ucomm.
WHEN 'FC01'.
tablename = mmtable.
sscrfields-ucomm = 'ONLI'.
WHEN 'FC02'.
tablename = sdtable.
sscrfields-ucomm = 'ONLI'.
WHEN 'FC03'.
tablename = hrtable.
sscrfields-ucomm = 'ONLI'.
ENDCASE.*INITIALIZATION EVENT
INITIALIZATION.*VALUES ASSIGNED TO DROPDOWNLISTS IN THE SUBROUTINES
PERFORM f4_value_request_pa.
PERFORM f4_value_request_pb.
PERFORM f4_value_request_pc.*START OF SELECTION EVENT
START-OF-SELECTION.*SUBROUTINE FOR OUTPUT
PERFORM output.*&----------------------------------------------------------------*
*& Form f4_value_request_PA
* text
*SUBROUTINE TO PROVIDE DROPDOWN VALUES TO LIST1
FORM f4_value_request_pa. DATA: l_name TYPE vrm_id,
li_list TYPE vrm_values,
l_value LIKE LINE OF li_list. l_value-key = '1'.
l_value-text = 'Plant Data for Material'.
APPEND l_value TO li_list.
CLEAR l_value. l_value-key = '2'.
l_value-text = 'General Material Data'.
APPEND l_value TO li_list.
CLEAR l_value. l_value-key = '3'.
l_value-text = 'Storage Location Data for Material'.
APPEND l_value TO li_list.
CLEAR l_value. l_value-key = '4'.
l_value-text = 'Units of Measure for Material'.
APPEND l_value TO li_list.
CLEAR l_value.
l_name = 'ONE'. CALL FUNCTION 'VRM_SET_VALUES'
EXPORTING
id = l_name
values = li_list
EXCEPTIONS
id_illegal_name = 1
OTHERS = 2.
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.ENDFORM. " f4_value_request_tabname*&----------------------------------------------------------------*
*& Form f4_value_request_PB
* text
*SUBROUTINE TO PROVIDE DROPDOWN VALUES TO LIST2FORM f4_value_request_pb. DATA: l_name TYPE vrm_id,
li_list TYPE vrm_values,
l_value LIKE LINE OF li_list. l_value-key = '1'.
l_value-text = 'Sales Document: Header Data'.
APPEND l_value TO li_list.
CLEAR l_value. l_value-key = '2'.
l_value-text = 'Sales Document: Item Data'.
APPEND l_value TO li_list.
CLEAR l_value. l_value-key = '3'.
l_value-text = 'Sales Document:Header Status'.
APPEND l_value TO li_list.
CLEAR l_value. l_value-key = '4'.
l_value-text = 'Sales Document: Item Status'.
APPEND l_value TO li_list.
CLEAR l_value.
l_name = 'TWO'.
CALL FUNCTION 'VRM_SET_VALUES'
EXPORTING
id = l_name
values = li_list
EXCEPTIONS
id_illegal_name = 1
OTHERS = 2.
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
ENDFORM. " f4_value_request_PB*&----------------------------------------------------------------*
*& Form f4_value_request_PC
* text
*SUBROUTINE TO PROVIDE DROPDOWN VALUES TO LIST3FORM f4_value_request_pc. DATA: l_name TYPE vrm_id,
li_list TYPE vrm_values,
l_value LIKE LINE OF li_list. l_value-key = '1'.
l_value-text = 'HR Master :Infotype 0001 (Org. Assignment)'.
APPEND l_value TO li_list.
CLEAR l_value. l_value-key = '2'.
l_value-text = 'Address Infotype 0006'.
APPEND l_value TO li_list.
CLEAR l_value. l_value-key = '3'.
l_value-text = 'Education Infotype 0022'.
APPEND l_value TO li_list.
CLEAR l_value. l_value-key = '4'.
l_value-text = 'Basic Pay Infotype 0008'.
APPEND l_value TO li_list.
CLEAR l_value.
l_name = 'THREE'.
CALL FUNCTION 'VRM_SET_VALUES'
EXPORTING
id = l_name
values = li_list
EXCEPTIONS
id_illegal_name = 1
OTHERS = 2.
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
ENDFORM. " f4_value_request_PC
*& Form OUTPUT
* text
* -->P_TABLENAME text
*fINAL OUTPUT
FORM output. DATA p_table(10). p_table = tablename.*popup to display teh selected table and
*Continue button is clicked
CALL FUNCTION 'POPUP_TO_DISPLAY_TEXT'
EXPORTING
titel = 'User Selections '
textline1 = p_table
textline2 = 'is the Selected table'
start_column = 25
start_row = 6.*assigning the table value in p_table to the
* Table in SE16 transaction by explicitly calling
SET PARAMETER ID 'DTB' FIELD p_table.
CALL TRANSACTION 'SE16'.
ENDFORM. "OUTPUT
Regards,
Manoj Kumar P
Maybe you are looking for
-
Print Notification When A Letter Is Printed.
Hi Gurus, Recently we've got an requirement where in an Interaction Center Letters are created. The requirement is, 1. When the agent hits on print button available on the Letter overview screen, a notification should be sent to the supervisor of the
-
My MacBook froze & now won't turn on.
My Macbook is not working. It first froze while I was using it, then it just turned off. I tried to turn it on but then it just stayed black but this time with a little blue square with a circle which is spinning. What should I do?
-
Hello, I'm using Pagemaker 7.0.1 & Distiller 5.0.2 in OS 9 to make PDFs. I had an issue where I went to export a PDF from Pagemaker but it was not giving me correct output. Apparently I was using the wrong PPD. I have two different versions, the one
-
Hello This might just be a 50% java issue, but Im wondering somewhat about using pdf in an iFrame in the browser. What I want to do: - Open a pdf stream with java - Display that stream in a html/jsp page within a iFrame Is there a way to display the
-
Problems updating Slovenia's E71 to 210.21.006
OK, I see moderators deleted my previos topic because I posted some URLs. This is the version without them. I have one fairly weird problem... Recently I bought 2 unbranded E71's, one gray code: 0559566, and one white 0561164. Via, NSU, I sucessfully