Hierarchical Filter Web Item causes validation warning.

When I validate my web template which contains a hierarchical filter web item agianst the server I get the following warning (W1):
Mapping for Service item_validation_service for Object HIERARCHICAL_FILTER_ITEM missing
Maybe this also relates to my problem of not having the possibility to choose a characteristic for the hierarchical filter (see my post <a href="https://forums.sdn.sap.com/thread.jspa?threadID=209968&tstart=0">https://forums.sdn.sap.com/thread.jspa?threadID=209968&tstart=0</a>)
How can I fix this mapping issue?
Thanks to any answers in advance.
Best regards,
Philipp

Hello,
Your first problem is that ABAP SP does not equal Java SP. This is not a valid scenario.
Please update both to the same SP level.
After it, please retest your problem. I think that the problems will be solved (at least this one with validation service).
Short explanation to validation service:
Every template created in WAD will be validated before saving it. We have two validations:
1. one is locally with the meta data this checks if:
- all used parameters are on its place,
- all parameter values are valid,
- all defined items are existing...
2. second one is extended validation on the Java Server: this one checks i.e. following:
- are all used data providers valid
- are all used characteristics valid
- item dependent validation (e.g. if one item needs a dependency between to setting - this can be checked here)
The first one will be executed in Front-End and in ABAP Back-End. The second one in Java. Because your Java stack is /probably/ lower than ABAP, this validation does not work.
I hope I have explained it clearly.
Regards, Karol
BI Development

Similar Messages

Web Template - Filter web Item

Helle everyone,
I have a question in Web Application Designer. There are a filter web item which I can write or select the values. I mean, if the user remember the value, he Just write the value, but if he doesn't he can select his value fron other pop up window.
That I nee is something like the filters pane whe I excute a query that haver variable in the query designer. That I need is the field where I can write o choose the value of the variable.
Or how I can do that?
Thanks for your answers.
Jose

not answered

Web Items cause poor performance?

Hi Experts!
I have a web report that takes approximately 60 seconds to run. it has 2 queries but they are set to run only on navigation, and in RSRT, only 1 query runs on query execution.
In RSRT, the report information says that the query takes about 7 seconds.
Therefore, I am assuming that the other [approx] 50 seconds are being lost at the presentation layer.
Within my report, I have a number of Web Items. stripping out the web itmes (tabs, containers, etc) to just the bare minimum (Analysis table). I have removed the other query entuirely. the report now returns in approximately 14 seconds.
Therefore, I am wondering:-
Does anyone know if the number of Web Items has a detrimental affect on report preformance?
Does anyone know of a way to speed up this part?
Is it something to do with the processing of the hardware that could slow this down?
Has anyone experienced this before? And if so, are there any pointers on how this can be resolved.
Many thanks!
Dave
Forum points always awarded for helpful answers!

CSM
Thanks - but I know what Web Items are, I am interested if they have an impact of report preformance (ie, does using 12 web items with 1 query reduce report preformance?) My theory is that is does, but if it does, I would like to know why and if there is anyway to improve performance - even if this means upgrading the hardware.
I am trying to find out if anyone has come across similar issues on their projects and if they have, how they overcame this.
Thanks anyway!

Set Web Item parameter HIDDEN = 'X' based on Filter Value(s)

In a BW3.5 Web Template I want to set a Web Item parameter HIDDEN = 'X' based on a filter value for another Data Provider in the Template.
In other words I want a Web Item to be hidden if certain Co Codes are used in the Filter for another Data Provider in the template.

The output of this statement gives the variable value. If using a filter use a Filter Web Item.
<object>
 <param name="OWNER" value="SAP_BW"/>
 <param name="CMD" value="GET_ITEM"/>
 <param name="NAME" value="TEXTELEMENTS_2"/>
 <param name="ITEM_CLASS" value="CL_RSR_WWW_ITEM_TEXT_ELEMENTS"/>
 <param name="DATA_PROVIDER" value="DATAPROVIDER_1"/>
 <param name="GENERATE_CAPTION" value=""/>
 <param name="ELEMENT_TYPE_1" value="VARIABLE_K"/>
 <param name="ELEMENT_NAME_1" value="ZUGJAHR"/>
 <param name="ONLY_VALUES" value="X"/>
 ITEM: TEXTELEMENTS_2
</object>

Attributes of an InfoObject in a Filter Pane web item.

Hi All.
I need the some wisdom
I have a Web template developed in WAD. 7.0. In this template, we have a filter pane web item for selecting values of the characteristic 0MATERIAL. It works properly but when I open the filter pane the 0material values appear with ALL ITS ATTRIBUTES (around 70) and that is very annoying.
So, the question: is there any way to restrict the number of the attibutes displayed in the window? I only want to show the material number and its description.
Thanks in advance
Gdm

Hi Montero,
I also had similar problem earlier , i had solved by making changes in the properties of that particular characterstic.
That is click on particular characteristic and in properties pane goto advanced tab there you can see Query Execution for filter value selection here try changing to "only posted values for navigation" .
Hope this helps you.
Thanks
Tulsi
Edited by: thulasi ram on May 20, 2008 9:25 AM

Hierarchical filter in Web Reporting

Hi,
I'm working with BI 7.0 SPS13 and the problem is the hierarchical filter displays every characteristic node using a very long text linking every attribute of the base characteristic along with it's values. For example:
Gcia.Tecnica, Ind gpo.compradores: #, ID org.compras: #, ID encargado compras: Sin asignar, Unidad organizativa es sociedad GL: Sin asignar, Sociedad CO del centro de costes maestro: ANC1 ANCAP, Ind.grupo vendedores: #, Ind.oficina ventas: #, Ind.organiz.ventas: #, Org.servicio ej.CRM: Sin asignar, Grupo vendedores CRM: Sin asignar, Oficina ventas CRM: Sin asignar, Org.ventas CRM: Sin asignar, Org.servicio CRM: Sin asignar, CeCo maestro: 203560 GRALES. TECNICA, Centro: # Sin asignar, Org.compras: # Sin asignar, Grupo de compras: # Sin asignar, Organización de ventas: # Sin asignar, Grupo de vendedores: # Sin asignar, Oficina de ventas: # Sin asignar, Sistema fuente: DES Mandante 500
That is just one node, imagine a complete hierarcy!

Hi Martin,
In query designer go for the properties of the characteristics on which the hierarchy is active, under display as you have 2 windows, the 1st window allows
you to choose key, key+text, text etc, and the 2nd windows allows you to retract you selection 1st window to standard or short text. probably choosing short text would solve your problem.
**Assign points if helpful**
Peter R

Hiding a web item through the command line URL

We use the Web API and command line processing heavily to pass in different filter values, variable values, data providers, etc. to our web reports. I had a requirement within a given area to launch our web reports with the Navigation block visible on the web template. In our commonly used 'default' web template, we currently allow the users to switch this item on/off once they are in the report, but we always have it come up Hidden initially.
My question is this: is there some trick to getting a web item property changed dynamically at execution time from Hidden=X to Hidden= ? I have tried numerous attempts to format a URL to change this behavior, but have been unsuccessful. A sample would be: &ITEM=GR6&MULTI=X&HIDDEN= --> this is intended to make all items with 'GR6' in the name unhidden. But in my case, it ends up making more web items visible than I want. Even specifying the Item name directly does not help.
I have also tried applying it in conjunction with a command sequence from the Web API docs. Is there a particular command that this has to go with (i.e. LDOC? RESET_WEB_ITEM? etc.)? We have a button on the web template that issues the command <SAP_BW_URL ITEM='GR6' MULTI='X' HIDDEN=''> when clicked -- this works fine. How do I apply the same type of logic to the initial URL within the command processing?
Any help would be appreciated. I know that I can resolve this by just creating a copy template with this web item set to Visible instead of Hidden at the launch. I was just thinking I could reuse the main web template and control it through the URL.
Thanks...
Jody Chassereau

Heike,
maybe you can help me out on this one:
I'm trying to implement Tobias Kaufmann's How To Paper Web Printing with Excel.
Before calling the respective Abap classes from my web template, I want to hide the web item Hierarchical Filter Selection as this one comes out ugly when downloaded to Excel. So what I'm doing is, I first hide the Filter Selection and then call the Abap classes.
Here is the coding that I am using:

<td class="SAPBEXNavLine"><A href="<SAP_BW_URL
CMD_1='Item=HIERCONTEXTMENU_1&HIDDEN=X'
CMD_2='CMD=PROCESS_HELP_WINDOW&HELP_SERVICE=HELP_SERVICE_PRINT&ITEM=Table_1&SUBCMD=PRINT_EXCEL'>">
<IMG alt="Web Print with Excel" src="/sap/bw/Mime/bex/icons/print.gif" border=0></A></td>
This coding is working fine.
The problem is however, that the Hierarchical Filter Selection is now hidden in my web template. To unhide it, I thought I'd use the coding as above, but add a third command (CMD_3) to make that item visible again.
Here is the coding:

<td class="SAPBEXNavLine"><A href="<SAP_BW_URL CMD_1='Item=HIERCONTEXTMENU_1&HIDDEN=X'
CMD_2='CMD=PROCESS_HELP_WINDOW&HELP_SERVICE=HELP_SERVICE_PRINT&ITEM=Table_1&SUBCMD=PRINT_EXCEL'
CMD_3='Item=HIERCONTEXTMENU_1&HIDDEN='>">
<IMG alt="Web Print with Excel" src="/sap/bw/Mime/bex/icons/print.gif" border=0></A></td>
Unfortunately, only the commands CMD_1 and CMD_3 are being executed (which is kind of useless), the main command CMD_2 however is not.
Do you have any idea why this is happening and how to avoid this?
Really appreciating your help,
Regards,
Yogen

Authorization Problem with Hierarchical Filter

Hi Gurus!
In our BW system I created a query that includes hierarchy-enabled characteristic
(0costcenter). 0costcenter has a hierarchy node variable to restrict
user's data by using authorization.
Then I created an authorization object from t-code RSECADMIN, in this auth.
object, restricted 0costcenter from hierarchy authorization tab , and
selected 6 nodes (the nodes have no sub-nodes).
In our web template ( WAD 7.0 ) I used hierarchical filter to see the 6 nodes in our report. It works fine when I first open the template in our Enterprise Portal that we see in the variable screen,0costcenter's variable captures the nodes that I restricted in our authorization object.
In the portal the hierarchical filter displays only selected nodes but this filter shows the hierarchy's root (name of the hierarchy) and when we choose the root the analysis displays all the values, the authorization do not work here.
From RSECADMIN, In the hierarchy authorization tab, I tried all the type of hierarchies but all of them gave the same result.
When i execute the report in BEx Analyzer, the authorization works fine, I think the problem is about hierarchical filter but i cannot find any solution...
Can you give me an idea plz..
Thank you!

Hi,
I think this is caused by program error.
Take a look:
[1075125|https://websmp230.sap-ag.de/sap(bD1kZSZjPTAwMQ==)/bc/bsp/spn/sapnotes/index2.htm?numm=1075125] - Unauthorized data displayed when structure element expanded
[917565|https://websmp230.sap-ag.de/sap(bD1kZSZjPTAwMQ==)/bc/bsp/spn/sapnotes/index2.htm?numm=917565] - Query displays unauthorized data
[981828|https://websmp230.sap-ag.de/sap(bD1kZSZjPTAwMQ==)/bc/bsp/spn/sapnotes/index2.htm?numm=981828] - No authorization for assigned inactive hierarchy
[654947|https://websmp230.sap-ag.de/sap(bD1kZSZjPTAwMQ==)/bc/bsp/spn/sapnotes/index2.htm?numm=654947] - Hierarchy authorizations with compound characteristics
Only available in German:
[1158432|https://websmp230.sap-ag.de/sap(bD1kZSZjPTAwMQ==)/bc/bsp/spn/sapnotes/index2.htm?numm=1158432] - Zu viele Werte berechtigt bei Hierachie mit Intervallen
Hope this helps.
Regards
Andreas

Web item : List of documents of an infoprovider

I have problems to display all documents of an infoprovider in a web item "list of documents" of a web template.
I chose as type of data provider : SELECTOR_DATA_PROVIDER and selected an infoprovider but I have the error message :
" The referenced data provider "DP_1" is not a query view
In the Web Application Designer, set parameter DATA_PROVIDER_REF in template TEST_COMMENTAIRE1 for Web item DOCUMENT_LIST_ITEM_1 to a valid data provider of type query view "
And the type "query view" does not respond to my needs because it is too restrictive.
Do you have an idea ?
Thanks
Catherine BELLEC

Hi,
Goto RSA1 --> Metadata repository click Multiprovider , select requried MP and click again .
System would generate a detaild report including report list in next screen.
hope it helps..
regards,
Raju

How to pass multiple query string values using the same parameter in Query String (URL) Filter Web Part

Hi,
I want to pass multiple query string values using the same parameter in Query String (URL) Filter Web Part like mentioned below:
http://server/pages/Default.aspx?Title=Arup&Title=Ratan
But it always return those items whose "Title" value is "Arup". It is not returned any items whose "Title" is "Ratan".
I have followed the
http://office.microsoft.com/en-us/sharepointserver/HA102509991033.aspx#1
Please suggest me.
Thanks | Arup
THanks! Arup R(MCTS)
SucCeSS DoEs NOT MatTer.

Hi DH, sorry for not being clear.
It works when I create the connection from that web part that you want to be connected with the Query String Filter Web part. So let's say you created a web part page. Then you could connect a parameterized Excel Workbook to an Excel Web Access Web Part
(or a Performance Point Dashboard etc.) and you insert it into your page and add
a Query String Filter Web Part . Then you can connect them by editing the Query String Filter Web Part but also by editing the Excel Web Access Web Part. And only when I created from the latter it worked
with multiple values for one parameter. If you have any more questions let me know. See you, Ingo

Variables Display With Info Field Web Item

Dear Friends,
We are facing one issue in BI 7 WAD.Can any one please suggest how to achieve this..
Issue1) In my query, we are having 10 variables and user has enterd 2 variables for his
selection.After executing the web i need to display those 2 variables only.But in my case i
am displaying along the two variables with values and remaining 8 variables as blank.I need
to show those two variables only.For variable display i am using info field web item.Can any one
throw some light on this.
Thanks in advance
Regards
Madhu

Hi Madhu,
It should work. Plz. check your variable settings again.
Display Static Filter Values = Off (On in case you want to display characteristic restrictions used in your query)
Display General Text Elements = Off (On in case you want infoprovider information)
Display Dynamic Filter Values = Off (On in case you want dynamic filters on runtime to be displayed)
Display Variables = On
Variable Settings -> Only Variables with Values = On
--Priya

Parameter REPORT for the Report Web item in the Web template is empty or mi

Hello,
I tried to create a Web-Template (WAD). By executing the report, I get the selection screnn, but by confirming the selection I get the following message:
Web Item Report Error
Web template error in specifications for the Web item report
Parameter REPORT for the Report Web item in the Web template is empty or missing
Use the BEx Web Application Designer to add parameter REPORT to the report Web item in the Web template, and assign a report name to the parameter
Contact your system administrator. This error was recorded
What can I do to solve this error?
Thanks!
XmchX

As DP_1 Type Query_view_Data_provider, I have assinged a Query Designer Query wich works fine, if I execute it as QDR.
The entry Query_view_Data_provider makes sense for me, but what do I need to maintain for the type "Filter"?
Thanks!
XmchX

Placing 2 Web items in the same place in a Dashboard

Hi,
I am creating a dashboard with 4 charts in a single page, 2 rows with 2 charts in each row. One requirement of mine is like, take a chart for example, when i first execute the template, it should display a Bar chart and then the same chart should change to Pie chart. One option of doing this is by adding the charts in a dropdown but the problem is i need both the charts in the same place. I couldnt place both the web items in the same place, also i am not sure about how to make both the charts display in the same place.
If anybody have come across this, help me in this.
Regards,
Murali

Hi Pradnya,
This solution worked :-). I do have one more problem. I want a Text Item & a Dropdown item to be in the same row of the dashboard. i have already created a Dashboard item placed in a container. So, i have created one more container and placed the text item in that.
But when i go to Container Layout, in the Row selection, i couldnt see both the container and the text item in the Subordinate Web Item. I tried deleting the container and creating a new one again but the same problem is appearing. The newly created container is not seen in the Subordinate Web Item.
What could be the reason causing this problem?
Any help on this?
Regards,
Murali

How to pass parameter values to a customer exit web item (WAD)

Hi gurus,
I have a wad with a data provider and a filter panel filtering that dp by using a variable. There is also a customer exit which saves the values of that variable into a z table.
How can I pass the values of the filter panel to the customer exit web item?
Thanks in advance,
Rob

Can you clarify your scenario? Which is the case you're talking about?
1) You want to pass a parameter from OmniPortlet to a PL/SQL procedure.
2) You want to pass a parameter from a PL/SQL procedure to OmniPortlet.
In both cases the most obvious way of doing it is through request (URL) parameters.
Render a link in your portlet (either in OmniPortlet or using PL/SQL) that invokes a portal page, containing the other portlet.
Both OmniPortlet and PL/SQL allow you to wire and access page parameters.
Take a look at the Using Parameter and Events section of the Portal User's Guide and the Parameters and Events section of the Portal Developer's Guide.
Hope this helps,
Peter

Automator Filter Finder Items

A very simple task, which I have attempted to figure out many times over the last few months; but my repeated attempts haven't been successful. This should be easy for someone to resolve…
I would like to strip out all the files of a certain extension (.txt) from an hierarchy of nested folders, & move them to the Trash. (Told you it was easy!)
Here's what I think ought to work:
• Create an Automator Workflow
• 'Ask for Finder Items' to select the topmost folder
• 'Get Folder Contents' with 'Repeat for each subfolder found' — (the results successfully include all the relevant files)
• 'Filter Finder Items': "find files where any of the following are true: file extension is .txt" — (I tried "txt" as well as ".txt")
• 'Move Finder Items to Trash'.
The files turn up (alongside loads of other junk) in the 'Get Folder Contents' step, & they are reported in the results; but when I try to filter out everything apart from the .txt files, so that only the .txt files remain, the filter reports no results.
So the 'Filter Finder Items' action completes with no results, & with a warning that: The action “Move Finder Items to Trash” was not supplied with the required data.
I think it must be something obvious, but I can't figure it out, & although I've searched extensively online, everyone else with similar problems has other complications which get resolved… so they lose interest just at the point where I think they're going to reveal the solution.

You need to understand the issues here. Automator was released with 10.4 (Tiger), and many of the core automator actions date from that time. This introduces forward-compatability problems: things that should work (and maybe did work) in 10.4 might not work as specified in 10.6, depending on if/how the underlying cocoa APIs have changed. Now, in the best of all possible worlds, Apple would update automator actions with each new upgrade, but it's probably not needed for the bulk of the actions, and Apple may not be aware of problems that do exist with given actions (that depends on whether people filed meaningful bug reports on them).
Don't be confused by the seeming simplicity of what I did: the Move Finder Items to Trash action probably uses cocoa file system APIs directly, whereas my applescript leverages the developed programmatic underpinnings of the Finder - the Finder has a built-in system for moving files in bulk, whereas the action is obviously moving files one at a time (which is where things are getting congested).
Filter Finder Items seems to be a simple metadata search (just another use of the spotlight framework, which hasn't changed much since its inception) so I can't see any way in which it would fail. it is, of course, limited by the same things that spotlight is limited by - it won't find material that's not indexed and may not do exactly what one always expects (e.g., may not recognize an extension as an extension unless the extension belongs to an app registered with the system) but other than that there's very little it can do wrong. As a general rule, actions that deal only with manipulating automator data (e.g. modifying references passed from one action to the next) won't break. You'll only see breakage with actions that need to access exterior frameworks that have changed significantly since the actions were created.
That's the best answer you're going to get: one can't prove a negative, so there's no way to demonstrate that FFI isn't broken. it's easy enough to check for a given task, though - just run the workflow you have on a test folder without the deleting action, check the results window, and compare it to the results you expect (which you can gather by eye in a Finder search window, through an applescript, through an app that will report the number of files of given types in a folder…).

Hierarchical Filter Web Item causes validation warning.

Similar Messages

Maybe you are looking for