Hierarchy Leaf node does not display in F4 functionality

Hello,
Scenario:
- profit center based hierarchy
- user has access to only leaf nodes in that hierarchy.
- authorisation works perfectly and displays only the correct values
Problem:
When we run the query in the portal and use the F4 functionality to select the profit center value nothing is displayed.
This is ok for the particular case where one profit center needs to be accessed by the user since it is automatically filled out, but if that user has access to more than one profit centers this is a problem.
System:
BI7 BCS
Support Package Stack 10 ABAP+Java
SAP_BW is on SP11
Please note that the profit center field is also not greyed out. We raised an oss about this and SAP responded with "this is working as intended". Thus the use is able to type the values into the profit center hierarchy box.

Check whether you are filtering any level of the hierarchy when running this query? or you are using a hierarchy variable and defaulting it to certain level which doesnot show what you are looking at.
Hope this helps you.

Similar Messages

Setting DAQ channel by property node does not display the value

I am writing a configuration VI to set channel selection and calibration parameters for an SCXI chassis. I store a default setup in a configuration (ini) file and read that file automatically when the VI is called. The value from the file are set by property nodes using the "Value" property. The values from the file do not display in the DAQ channel selection rings, but the numerical calibration values do display correctly. When I click the down arrow in the channel rings, the correct value displays.
This behavior exists both in LabView and app-builder EXEs. Also, if I change the property nodes for the DAQ channels to local variables, it works. The Value (signaling) property doesn't cause them to display
properly either. Why can't I use the property node?

I don't understand exactly what you are trying to do.
Please upload a simple VI to demonstrate the behavior you are describing. Remember also to attach the .ini file.
Best regards,
Philip C.
Applications Engineer
National Instruments
www.ni.com/ask
- Philip Courtois, Thinkbot Solutions

SAP BI - Hierarchy Characteristic Node key not displaying Web Analyzer

I am using 0COMP_CODE as a characteristic node in my 0COSTCENTER hierarchy. Using BEx analyzer works fine, but in Web Analyzer the 0COMP_CODE key shows as a "#" in a query display regardless what I set the characteristic or hierarchy node to display.
Thanks in advance.
Tom

Hi,
If S0001 is a subtree node of A0003, then change the 'type of authorization' to 1 (subtree below node) for A0003 in your analysis authorization. Currently in your case, I guess its 0- selected node only (default type).
Thanks
Sandipan

Tree with multiple root nodes does not display

I am trying to create a tree to display some hierarchical data which contains several root nodes.
I have specifed that the TREE_ROOT value is always Null as the root nodes have a null value for the PARENT_ID. The page displays yet none of the data is displayed.
I have manage to get it to work by creating a dummy single root that I reference from the existing root values?

Phattam,
The TREE_ROOT identifies the root node's ID, not its PARENT_ID.
For example, if we build a tree on the oehr_employees table, the ID is EMPLOYEE_ID and the PARENT_ID is MANAGER_ID. therefore, to identify the start of the tree, we could populate the TREE_ROOT with a select statement e.g.
SELECT employee_id FROM oehr_employees WHERE employee_id = 100This identifies a single value and the tree starts from employee_id 100.
If we used a select statement that retrieves more than one row, e.g.
SELECT employee_id FROM oehr_employees WHERE manager_id = 100then the tree starts at one of the children of employee_id 100 - ApEx will not show a tree that has more than one starting node. If you want to show these alternative starting points, you'll need to do exactly what you have done - create a 'dummy' root node.
Hope this helps,
Bryan.

WebGUI does not display descriptions of hierarchy nodes in RSH1

Hello,
I want to enable end users to maintain a hierarchy via SAP GUI for HTML.
I built a transaction (ZRSH1_$my-hierarchy) that calls rsh1 directly with the parameters InfoObject and hierarchy name. It works just as expected.
Now when I call my transaction in the WebGUI, it opens the modification view of the expected hierarchy. That's ok.
But the text descriptions of all the nodes are not displayed. It just displays "0HIER_NODE" where the textnode descriptions should be.
Is that a bug? Or can I fix it somehow?
Thanks in advance,
Stefan
By the way:
I am on BI 7.0 with Integrated ITS 6.40
SAP Base 10
Message was edited by:
Stefan Voltz

Hi Vicky,
When you talk of views do you want to run the report in the web or the Analyzer?
If its the Analyzer, run your query - open and close whatever nodes you want in your query and on the Properties of the Query ensure that the Interaction Tab - Return to Global Definition is not enabled. Save your workbook and then when you reopen the workbook you will see the nodes opened or closed as you saved them.
Regards
Gill

Hierarchy node variable - successor node data not displayed

Hello,
I have a query with a hierarchy in the rows section. This hierarchy is restricted by a hierarchy node variable with the following settings: variable type hierarchy node; customer exit; single value; mandatory; not ready for input; cannot be changed in query navigation.
The customer exit correctly supplies the node. However, only data for THIS node is displayed in the query results. And data for successor/underlying nodes is NOT displayed.
I tried several things, including:
- rightclick Rows > Display as a Hierarchy
- customer exit variable: multiple values instead of single value; optional instead of mandatory
In the Hierarchy Attributes for the hierarchy, nothing is checkmarked, except for Root/Totals Item Appears Above and Drilldown start level = 00. The hierarchy and its nodes are valid from 01.07.2005 to 31.12.9999.
I have a feeling in what area the solution can be found, but I have no clue what to do further on with it. As a test I replaced the customer exit variable with a user entry variable. If I then execute the query, I can select either the node or the value (both with the same technical value!). If I select the node, I get all data, including data for successor nodes. If I select the value, I only get the data for the node, not the underlying successor nodes. For some reason, the customer exit variable behaves like the latter and not like the first. I do not know how to solve this.
I would greatly appreciate if you could help me out of this issue here.
Kind regards,
Frank

Hi,
no, it doesn't. It just returns the data for the node and not for the underlying nodes.
Frank

DataGrid does not display XML data

Hello, and thanks for reading this...
I am having a problem displaying XMLList data in a DataGrid.
The data is coming from a Tree control, which is receiving it
from a database using HTTPService.
The data is a list of "Job Orders" from a MySQL database,
being formatted as XML by a PHP page.
If it would be helpful to see the actual XML, a sample is
here:
http://www.anaheimwib.com/_login/get_all_orders_test2.php
All is going well until I get to the DataGrid, which doesn't
display the data, although I know it is there as I can see it in
debug mode. I've checked the dataField property of the appropriate
DataGrid column, and it appears correct.
Following is a summary of the relevant code.
...An HTTPService named "get_all_job_orders" retrieves
records from a MySQL database via PHP...
...Results are formatted as E4X:
HTTPService resultFormat="e4x"
...An XMLListCollection's source property is set to the
returned E4X XML results:
...The "order" node is what is being used as the top-level of
the XML data.
<mx:XMLListCollection id="jobOrdersReviewXMLList"
source="{get_all_job_orders.lastResult.order}"/>
...The "jobOrdersReviewXMLList" collection is assigned to be
the dataProvider property of a Tree list, using the @name syntax to
display the nodes correctly, and a change event function is defined
to add the records to a DataGrid on a separate Component for
viewing the XML records:
<mx:Tree dataProvider="{jobOrdersReviewXMLList}"
labelField="@name"
change="jobPosForm.addTreePositionsToDG(event)"/>
...Here is the relevant "jobPosForm" code (the Job Positions
Form, a separate Component based on a Form) :
...A variable is declared:
[Bindable]
public var positionsArray:XMLList;
...The variable is initialized on CreationComplete event of
the Form:
positionsArray = new XMLList;
...The Tree's change event function is defined within the
"jobPosForm" Component.
...Clicking on a Tree node fires the Change event.
...This passes an event object to the function.
...This event object contains the XML from the selected Tree
node.
...The Tree node's XML data is passed into the positionsArray
XMLList.
...This array is the dataProvider for the DataGrid, as you
will see in the following block.
public function addTreePositionsToDG(event:Event):void{
this.positionsArray = selectedNode.positions.position;
...A datagrid has its dataProvider is bound to
positionsArray.
...(I will only show one column defined here for brevity.)
...This column has its dataField property set to "POS_TITLE",
a field in the returned XML record:
<mx:DataGrid width="100%" variableRowHeight="true"
height="75%" id="dgPositions"
dataProvider="{positionsArray}" editable="false">
<mx:columns>
<mx:DataGridColumn width="25" headerText="Position Title"
dataField="POS_TITLE"/>
</mx:columns>
</mx:DataGrid>
In debug mode, I can examine the datagrid's dataProvider
property, and see that the correct XML data from the Tree control
is present. However, The datagrid does not display the data in any
of its 6 columns.
Does anyone have any advice?
Thanks for your time.

Hello again,
I came up with a method of populating the DataGrid from the
selected Item of a Tree Control which displays complex XML data and
XML attributes. After the user clicks on a Tree branch, I call this
function:
public function addTreePositionsToDG(event:Event):void{
//Retrieve all "position" nodes from tree.
//Loop thru each Position.
//Add Position data to the positionsArray Array Collection.
//The DataGrid dataprovider is bound to this array, and will
be updated.
positionsArray = new ArrayCollection();
var selectedNode:Object=event.target.selectedItem;//Contains
entire branch.
for each (var position:XML in
selectedNode.positions.position){
var posArray:Array = new Array();
posArray.PK_POSITIONID = position.@PK_POSITIONID;
posArray.FK_ORDERID = position.@FK_ORDERID;
posArray.POS_TITLE = position.@POS_TITLE;
posArray.NUM_YOUTH = position.@NUM_YOUTH;
posArray.AGE_1617 = position.@AGE_1617;
posArray.AGE_1821 = position.@AGE_1821;
posArray.HOURS_WK = position.@HOURS_WK;
posArray.WAGE_RANGE_FROM = position.@WAGE_RANGE_FROM;
posArray.WAGE_RANGE_TO = position.@WAGE_RANGE_TO;
posArray.JOB_DESCR = position.@JOB_DESCR;
posArray.DES_SKILLS = position.@DES_SKILLS;
positionsArray.addItem(posArray);
So, I just had to manually go through the selected Tree node,
copy each XML attribute into a simple Array, then ADD this Array to
an ArrayCollection being used as the DataProvider for the DataGrid.
It's not elegant, but it works and I don't have to use a Label
Function, which was getting way too complicated. I still think that
Flex should have an easier way of doing this. There probably is an
easier way, but the Flex documentation doesn't provide an easy path
to it.
I want to thank you, Tracy, for the all the help. I checked
out the examples you have at www.cflex.net and they are very
helpful. I bookmarked the site and will be using it as a resource
from now on.

Related Content does not display on the name change page

Hi all,
Currently, i am doing some research for the related content. I find that delivery configuration has been on the Name Change component (self service). Then I do the security configuration but the related content option does not display on the name change component. No idea which step next i should take.
Please advise.
Any reference or docs is also welcomed.
Dennis

Hi,
What do you mean by my two nodes are all local.
Are you trying to use Related Content within one environment?
Make sure you have an authentication domain set on your webprofile and that your hosts file reflects this.
Make sure there is no proxy or firewall in the way.
Make sure Integration Broker is setup correctly.
Try pinging your server including the authentication domain.
Try looking for log files in the application server and errorLog.html in the Webserv folder.

Query on SQL Developer Connections Tree Does Not Display Objects

Hi Gurus, Could you please clarify on the below. As per the note ID 1458753.1, SQL Developer Connections Tree Does Not Display Objects to user in order to access database objects outside the owned schema/account. ------------------------- By default, and without granting wide privileges such as DBA, a user will only see his or her own objects in the first level object nodes under their connection. Objects in other schemas must be accessed via the Other Users node under the connection. This is the intended functionality/display in SQL Developer. ------------------------- Is there any other way we can achieve this? Requirement is very common - user A owns all objects and user B granted read/read-write privileges on user A objects. Now user B wants to Display user A objects in the corresponding objects node of SQL developer. Could any one shed some light here? Thanks Venu

First off, there is a dedicated SQL Developer forum where lots of the developers hang out. Those folks are way more knowledgable that we are about the tool.
That said, I have no problem displaying dates. Do you just have a problem with this particular query/ field/ table? Or does it affect all dates? What version of SQL Developer are you using? 1.1 is out now.
Justin

Context node does not contain any elements

Hi Masters,
                 I create a node dynamically from structure using CL_WD_DEMO_DYN_MODEL->create_nodeinfo_from_struct method. my code as
nd_field_info = nd_field->get_node_info( ).
wd_this->zwd_assist->create_nodeinfo_from_struct( EXPORTING
parent_info = nd_field_info
structure_name = dotablename
is_multiple = abap_true ).
When am set the data to context then it gives the error like node does not contain any elements, but i verified the attributes using nodeinfo then all attributes will be displayed, but when value inserting time it throws error.
Waiting for Your Response...
Advance Thankyou
Regards,
Sathya

Hi sathya ,
the method you using is absolute , the replacement for the methos is if_wd_context_node_info->add_new_child_node
pls refer the sample code to create a dynamic Node .
DATA: pa0001 TYPE REF TO cl_abap_structdescr,
           comp_tab     TYPE cl_abap_structdescr=>component_table,
           struct_type     TYPE REF TO cl_abap_structdescr,
          ls_pa0001   ?= cl_abap_typedescr=>describe_by_name('P0001').
          comp_tab      = p0001->get_components( ).
          struct_type   = cl_abap_structdescr=>create( comp_tab ).
struct_type = cl_abap_structdescr=>create( comp_tab ).
* now the nodeinfo is created
node_info = wd_context->get_node_info( ).
node_info = node_info->add_new_child_node(
    name                         = 'MY_NODE'
    IS_MANDATORY                 = ABAP_true
    IS_MULTIPLE                  = ABAP_true
    STATIC_ELEMENT_RTTI          = struct_type
    IS_STATIC                    = ABAP_false
refer DEMODYNAMIC component for dynamic creation of node
regards
Chinnaiya P
Edited by: chinnaiya pandiyan on Dec 15, 2010 2:07 PM

Adobe Bridge CS3 - does not display thumbnails for Canon 40D or 50D RAW files

I wanted to use Bridge to view my Canon EOS 50D RAW files and it does not display the thumbnails, just icons. I checked my 40D cr2 files and saw same thing.
I have purged the cache and rest the cache preferences and it has not helped. I would like to be abl eto view the thumbnails of the RAW files via Bridge if possible. Jpg files and Tif files can be viewed without any issues.
Am using Bridge version 2.1.1.9 and Pshop CS3 10.0.1

I have the exact same problem. I can view my RAW file thumbnails (which are .ARW files from my Sony A200 camera) in the Finder and in other applications, such as Preview, but not in Adobe Bridge CS3. I know that I did try purging the cache at one point to see if that would fix it, but then I didn't know what to do after that. Before I purged the cache, I was able to view RAW thumbnails in Bridge, but then they would not increase in size when I tried using the slider (at the bottom right of the Bridge window)

Aperture 3 project does not display any images in one Project

This is a strange situation. The bullets below outline the situation:
The project does not display any images
When I place the pointer over the project it shows there are 500+ images
I have located the RAW images stored in my aperture library
I can pull up the images using a smart folder and searching for photos taken on the event day
This is happening only to one of my projects that I know of (weird!!)
I have tried to 're-add' the image by both importing and dragging and dropping into the project, neither works
I tried the following basics:
Fixed permissions
Rebuilt the database
Tried to re-import the data, but when I have the 'don't import duplicates' these are not an option
Found the images in my Aperture library
I created another project and drug all of the images into that project
Any idea how I can fix this?
My fear is that if I delete the original project, the original master images will be deleted.

The most common cause of this is some sort of stuff in the search box at the top of the browser that you don't expect to be there. Just clear it and all your images should show up.
RB
One note - if you drug your images from one project to another it moves them vs copies them unless you hold down the option key.

MENU item selection does not display drop down in ITS enabled transaction

Hello,
We are experiencing a strange behavior between two portal env.
1. DEV.
For example we have transaction MM01 display in the Portal via ITS (integrated). The end user can select the Menu Tab and the System Tab and the drop downs appear as expected.
2. Prod
Same scenario as above. Only this time, end user is unable to select the button. The Menu and System Tab dont appear greyed out but selecting it does not display the drop down.
Material, Edit GoTo Defaults are some of the links under the Menu tab for MM01.
Very confusing. And this is the behavior in Prod for all transactions. Any ideas on why this is happening would be greatly appreciated.
The architectural difference is that DEV has no Web Dispatcher versus Prod has the Web Dispatcher.
We are on EP 7.0
Many thanks.
Regards,
Sunil

Thanks. Now, I realise this may cause dismay to some, but I have now solved the problem, and just wanted to share my experience with those even less savvy than myself. In Dreamweaver, the Spry css styles are arranged with little or no hint as to which style controls what. I found that there is a rule in the sub-menu styles that controls the little graphic arrows which indicate that there are dropdown subs under the tabs. I had removed these arrows to make way for my background images. However, the rules that control their positioning by percentage were still there, causing my images to display incorrectly. Of course, there was no way anyone could have spotted this and helped me as the fault was in the external spry css file, not the page code. So many thanks to vw2ureg for looking anyway. Regarding the page code, which you have flagged up, would you mind elaborating on what you see wrong here? I'm none the wiser. Many thanks again.

Product Revenue Bookings and Backlog Dashboard does not display any data

Product Revenue Bookings and Backlog Dashboard does not display any data even though the load completed successfully.
They are able to see just the parameters.
Not sure if the upgrade of the database from 9.2.0.6 to 10.2.0.3 is a factor.
What can I check?
Is there some table to verify that the data exists for display in the Product Revenue Bookings and Backlog Dashboard?
Screenshot is at:
https://gtcr.oracle.com/gtcr-dir/gtcr_5637/6415786.993/Product_Revenue_Bookings_Backlog_Dashboard.doc
Support suggested to create a new request set and run the initial load with load all summaries option; but there was no change in the Product Revenue Bookings and Backlog Dashboard.
Any ideas?

hi
We have faced the similar problem after the upgrade to 10G
What we did was
Ran the initial load of time dimension, Item setup request set, and the request set of all the dash board in the clear and initial load mode..
we were able to get the data once the clear and load is completed successfully
Regards
Ramesh Kumar S

REMOTE app on iPhone does not display Cover Art

I use the Apple REMOTE App on my iPhone to control my iTunes music library on a Mac. The REMOTE App controls the iTunes playback properly. However, the Cover Art for each song does not display on the "song" screen - showing the song currently playing. Across my iPhone screen (where the Cover Art should appear) are the words containing album of the song). The name of the song and album correctly appear at the top of the screen.
What is interesting is that when I hit the back arrow (left side top on song screen), all of the Cover Art appears in small thumbnails. The Cover Art also appears in other displays (for example, the currently-playing Album) using REMOTE on my iPhone. This means that the cover art is being transmitted to my iPhone - HOWEVER IT DOES NOT DISPLAY ON THE SONG SCREEN.
Can anyone kindly help me resolve this - because I would really like the Cover Art to display properly on the song screen. Thank you. Dale

Nezmo, This is really unbelievable. I have suffered from the issue I described for SEVERAL YEARS. Today, for some reason I decided to make this post on the Apple discussion board. And, today the issue was fixed by Apple. I just downloaded the update to the REMOTE app and the cover art now shows beautifully on my iPhone 6 plus. Thanks. Dale

Hierarchy Leaf node does not display in F4 functionality

Similar Messages

Maybe you are looking for