Hierarchy Node not summing  properly in Bex Analyzer

Hi Folks,
                  I am facing an issue in my report where the Hierarchy node is not summing up numbers properly.  Just a simple example
           Char 1   Value
           123        10.1
            231         2.1
            122        -2.1
Node 1 -
                        10 (instead of 10.1)
I have tried NODIM functional already and also tried exception aggregation (since I can't use "Calculate result as" option in a heirarchy) for my keyfigues. Please help as I can't think of any other solution. It seems like the node is ignoring the rounding of values which is done by bex for leafs automatically and is only bringing result priod to rounding. This is my assumption. Looking forward to suggestions. Thanks
Regards,
  Asad

Asad,
    Check the no of decimal places you have set for the key figures. Change it to the required no of decimal places.

Similar Messages

  • Hierarchy node not displaying some of child nodes

    Hi all,
    In my bex query for one of the hierarchy node  is not showing sum of its child nodes even though the belownodes got some data in it.
    What could be the reason.as all the other nodes at the same level are showing the sum of their child nodes.
    Thanks

    Display as hierarchy : no sum on node level.
    If the rows are set as u2018display as hierarchyu2019, all the objects in the rows section must have as setting for result rows : u2018always displayu2019

  • Variable screen not popping up in BEx Analyzer

    Experts,
    I'm facing a wierd situation while executing queries in 3.5 BEx Analyzer. When the query is executed using 3.5 BEx Analyzer varibale screen does not pop and report strats running wide open. The Varible input is optional. But if  the report in executed using Web (From the 3.5 Query Designer) variable screen pops up. This happens with the same user ID.
    Please let me know if you have any ideas, could this be something realted to authorizations. In the meantime, i'm trying to change the varibale to mandatory and see if the variable screen pops up.
    Thanks

    Hello
    The standard behavior is not show the variable screen if it has no mandatory variables. In the webtemplate you may have the parameter forcing to show the variable screen added in the code. It is something like  "force variable screen". Please check if you can see that parameter.
    regards
    Lucimar

  • Variable screen not seen when running BEx Analyzer

    Hi Gurus,
    when i execute my query in BEx Analyzer for some reason i dont see my variable screen and it gives me a message saying variable values not entered. If i run the same report in RSRT i do get my variable screen. It was all find till yesterday and for some strange reason i dont get to see my variable screen.
    Can anyone help me
    Surya

    What version are you on?
    Did you try resetting personalized variables? You may have hit that by mistake, happens a lot here. Not sure that would be the case with no values entered however.
    Al B.

  • Hierarchy node not available in Query Designer

    Hello Gurus,
    I can find the hierarchy node variable in BW but it is not available in query designer. Does anyone know what might be the problem and a solution?
    Thanks,
    Mark

    Hi Mark,
    You said you "find the hierarchy node variable in BW but it is not available in query designer".
    How did you find the hierarchy node variable in BW? From backend SAPGUI, you will only be able to see the variable in some internal tables like RSZGLOBV. Did you mean this?
    For "it is not available in query designer", do you means that when you want to create a hierarchy node variable for this characteristic in Query Designer, you don't find this certain hierarchy node variable in the hierarchy node variable list?
    Important thing to notice is that, flat value variables and hierarchy node variables are listed separately. Did you make sure that you have chose to list hierarchy node variables in Query Designer?
    Regards,
    Patricia

  • Hierarchy node value sum of all underlying node values

    Dear,
    The automatic calculated node in the hierarchy of 0PROFIT_CTR does not equal its underlying node values. How is this possible??
    Thanks!

    Hi,
    Just check in the characterisic maintenance screen whether there was any restriction on hierarchy summation levels.
    Hope this helps.
    Assign points if useful.
    Regards,
    Venkat

  • IF - Else condition is not working properly in Bex Query Designer

    Hi All,
    I have a KF called KPI Value. Based on the KPI Value, my report display has to show by using the if-else condition.  If the KPI value is '999999' then that particular KPI value has to display as 'X' against to that KPI No. Thats all my requirement. To achieve this I have created a formula based on the KF.
    (KPI Value == 999999)*(1/0)+(KPI Value <> 999999)*(KPI Value)*1
    Unfortunately, the above expression is shwoing the entire colmn as 'X' irrespective of the KPI value. i.e., logic is not working Could any one please suggest how to achieve this requirement. Your assistance is highly appreciable and very helpful. Thank you in advance!!!
    Best Regards
    Venkat...

    AL,
    I can visualize how condition should give results. The problem here is reality, I tired in my system with your formula and I got like as I mentioned.
    If you observe closely your If..else formula, (KPI Value == 999999)*0+(KPI Value <> 999999)*KPI Value
    If KPI Value == 999999 Result is 0, Else(Assuming) KPI Value <> 999999 Result is other nos like 1111, 2222 etc.
    Actually it is not If..else, it is IF..ENDIF. Both conditions should get satisfied to give below:--
    KPI value  Formula
    9999          X
    1111         1111
    2222          2222
    9999          X
    3333          3333
    4444          4444
    9999           X
    In the course of adding both conditions results, system is not able to add 0+ Other Values in single column. So it is giving mixed values * like below:--
    KPI value  Formula
    9999          X
    1111           *
    2222           *
    9999          X
    3333           *
    4444           *
    9999           X
    Note: Once again I want to say it is not to prove you wrong. Let's get some clarity on the issue. I might be also wrong. But I want to know the actual result. If you can test it tomorrow and let me know..it would be great.
    Regards,
    Suman

  • Not able to open BEX Analyzer after Executing RRMX Tcode

    Hello All
    My operating system is Windows,
    Whenever I start system pop up comes path is
    c:\program files\SAP\internet graphic server\bin\igswdserv.exe and it does not close. when I try to close one more grafic window opens.
    After stearting the console all tcodes are executable in my BI system but not able to run T code RRMX.
    Can anyone help me out to execute T code RRMX and how to close  above window.
    Thanks

    Sure...
    I think if you go thru transaction SNOTE, you can download and see a PDF of a KBA.
    But I always access via market place (which is exactly the same steps of SAP notes):
    https://service.sap.com/sap/support/notes/<note number>
    or
    https://service.sap.com/notes and seach with the KBA number.
    Cheers!
    Edward

  • Root/Totals item in FS Item hierarchy - not flipping properly

    Hi all,
    can you point me towards a solution?  I think I am missing something:
    in the hierarchy, but default the <b>Root/Totals Item</b> appears above the rest of the nodes.  I need to display it on the bottom.
    I've gone to the DW Workbench and looked at the appropriate hierarchy.  I changed the attributes to to have the Root/Totals item appear Below in the query.  Here is what I am getting, and what I am not:
    1. In BEx Analyzer, the query works properly, showing the Root at the bottom.
    2. In WEB Analyzer, the query still shows the Root on top
    3. If I use the characteristic (0CS_ITEM) as a navigational attribute for another characteristic in another cube, the root node also will not show on top.
    Any suggestion?  Should I open up an OSS message?
    Thank you for your help

    Hi Inge,
    Just ideas:
    1. Try to use the check of CoI settings - help in error messages may give you some clue.
    2. Many settings in SEM-BCS are time-dependent. Check if you use different version and/or different periods - missing settings may sit somewhere there.

  • BEx Analyzer not working in SAP GUI 7.10

    Dear All,
    BEx Analyzer 7.0 is not working on SAP GUI 7.10. Following are the details:
    OS: Windows XP SP2
    Installed the following softwares (in the sequential order):
    1. Microsoft .Net Framework 2.0 SP1
    2. MS Office 2003 (without any service packs)
    3. SAP GUI 7.10 (used SAPAllSetup.exe) to install both BEx Analyzer 3.5 and BEx Analyzer 7.0 alongwith SAP GUI 7.10.
    While BEx Analyzer 3.5 runs fine, 7.0 does not.
    Upon running BEx Analyzer 7.0 from the Programs menu, I see a toolbar on the left hand side on MS Excel in German. Whenever I click on any button, they do not respond.
    When I tried to install update for Office 2003 (KB907417), I received the message stating the patch has already been applied.
    I also applied SAP GUI 7.10 Patch Level 8, but still the problem remains the same.
    Running Tcode RRMX from the SAP GUI opens MS Excel with both the toolbars of 3.5 (on top) and 7.0 (on left). As before, 3.5 works fine, while 7.0 does not.
    Do I need to install Office SP2 or SP3, as well? Or something else? Any solutions?
    Thanks and Regards,
    Sachin.

    Hi All,
    This problem is due to .NET 2.0 assembly(nothing but .dll's),
    Step1 : Check if you can see this C:\WINNT\assembly\GAC exists
    If it does and still getting the error, then follow these steps,
    1) Uninstall office03
    2) Uninstall GUI
    3) Uninstall .Net 2.0
    4) Reboot
    5) Install .dll(WindowsXP-KB935448-x86-dll.exe) fix(this is due to .net1.1 and 2.0 coexistence)----- only if u get a critical message at startup.
    5a) Reboot
    5b) Install .net1.1
    5c) Reboot
    5d) Install .net2.0
    5e) Reboot
    6) Install office 03
    6a) Reboot
    7) Install .PIA's (O2003PIA.MSI)
    7a) Reboot
    8) Install setupall.exe for GUI
    9) Install KB907---- (office2003-KB907417-FullFile-ENU.exe)
    10) Reboot
    Let me know if you encounter any problems.
    OR....
    Update the Latest Patchs of GUI & Bex.
    BI710SP03_300-10004472.EXE
    bi710sp04_400-10004472.exe
    gui710_6-10002995.exe
    Hope it helps you...
    @shaik

  • Local formula created in web analyzer not reflected in bex analyzer.

    Hello all,
    I had created a Local formula in the web analyzer and saved the query as a view. Now, when I open the same view in
    bex analyzer then I cannot find the local formula column; i.e. it is not reflected in the bex analyzer.
    Is this an error or this is not possible?
    Thanks in advance,
    Sandy.

    Hello Sandy,
    If you create the formulo at the web analyzer you will not be able to see it at the bex analyzer. Only if you create at the query designer, so you will be able to see it at the web and bex analyzer.
    Thanks,
    Diego Ferrary

  • Text characters displayed as # on Bex analyzer (excel)

    Hi all,
    I am having issues with Turkish Charaters displayed on the report output on Bex analyser.
    The Turkish text characters in the fields like Name 1, Name 2, city are displayed in # format. 
    This is happening only when the report is executed on Bex analyzer (excel). In BW system I can see the turkish characters properly. There is no # symbol anywhere when i check in cube or master data.
    The # sign is not shown when the query is executed on internet explorer(web report). This issue is only with Bex analyzer(excel).
    Some sample data is as below.
    Correct data in BW cube or master data: ÜCRETLI ÜRETICISI TÜ
    The same is displayed when executed the report over web.
    But when executed on BEX analyzer(Excel) it shows as: #CRETLI #RETICISI T#
    This was not happening last month. I was able to see the turkish characters last month properly on BEX analyzer.
    Now we are having this # issue.
    Can anyone suggest what could be the problem with? and how we can rectify this?
    Thanks in advance

    Hi Maddy,
    I also think it is a front-end issue.
    The texts look fine in RSA1 and in Web Analyzer.
    The problem with the codepage variable is that as far as i know it can have only one value.
    On my report I have a list of purchase orders with the vendors.
    The vendors come form different countries and are maintained by the country's affiliate in their native language.
    The user needs to see the texts for all displayed vendors regardless the language and alphabet.
    Right now I have probelms with Greek, Bulgarian and Serbian.
    But next month the report may contain the vendors from other countries.
    Therefore I would have to add all languages to codepage variable.
    In fact in my system it doesn't even work for one value.
    I also added other languages to windows regional settings but it didn't help.
    Do you have any tips on that?
    Thanks,
    Marek

  • APD read data from Web Analyzer or BEx Analyzer?

    Dears,
    We are on SAP BI7.0, recently we upgraded to enhancement package1. SInce then, "suppress zeros (all values=0)"  setting in the query is not working properly in Web Analyzer while it's working correctly in BEx Analyzer.
    We are transfering data from this query to a table in CRM system usin APD. In CRM system, we are getting the output as in web analyzer (it contains zero value records).
    My questions are -
    1. Do APDs always read values from Web analyzer or we have some setting somewhere? (can we read from BEx Analyzer also?)
    2. What exactly is the background process sequence which is followed when an APD is executed?
    Your help is really appreciated.
    Thanks in advance.

    When we execute APD , MDX statement generated and which will execute and bring data from the data targets .
    Bex Query Conditions will not be applied to the MDX statements, we need to filter those records in the APD process , using ABAP program Process or any other filter process ..
    Ravi

  • Error when launching BEx analyzer from Portals

    BI Gurus...
    We are working on an initiative to migrate our user interface from SAP GUI to Enterprise Portal.
    Bex Analyzer is primary mode of reporting at this time.
    After importing the Roles into EP, I am able to execute the web queries successfully, in the BEx Wen analyzer. But, I get an error when I click on any of the excel workbooks. Our expectation was that once we click on the excel workbook name, the BEx analyzer will launch from EP. But it seems like the issue is with launching BEx Analyzer from BI Portal.
    Has anyone faced this issue before?
    Is it possible to launch BEx Analyzer from EP?
    Are their some key portal settings we have missed out on to enable launching BEx analyzer from EP?
    Please provide your thoughts/experience.
    Thanks,
    Ajay.

    Hi WernerS,
    Thanks for your response.
    The RRMXP Transaction works and it launching the BEx Analyzer as expected.
    Now, as per our research, I think there are 2 ways of launching BEx analyzer from BI Portals.
    1) Call via a URL
    You can call BEx Analyzer via the following URL: http(s)://<server:port>/sap/bc/bsp/sap/rsr_bex_launch/bexanalyzerportalwrapper.htm
    You can modify the URL to open BEx Analyzer with either a workbook, a query or a query view. You can use the following parameters to do this:
    ●      Parameter to open the workbook: ?WBID=<wb_id>
    I have tried calling via URL iView, but instead of launching the BEx Analyzer, it just throws a dialog box to "save" or "open" a file, RRMX.bex. When I try to open this file, it says "Invalid File Format".
    I tried opening the file in notepad and I see the following parameters passed.
               test
               Data=BX2,CONAJP,EN,mikoyan,17,,,250,
               9
    Any clue about what I am doing wrong?
    2) Calling via a Transaction
    You can generate BEx Analyzer in Portal Content Studio as an SAP Transaction iView.
    The iViews are of type SAP Transaction iView and have the code link com.sap.portal.app integrator.sap.Transaction.
    The most important properties are System, Transaction Code (TCODE) and ApplicationParameter.
    ●      The Transaction Code for all workbooks is RRMXP.
    ●      The ApplicationParameter property contains the value WBID=<WORKBOOK_ID>.
    I have tried this approach as well. When I open this iView, I see the RRMXP transaction in the Internet explorer, but the workbooks still does not open in the BEx Analyzer (Excel)
    Any thoughts on where am I going wrong ?
    Thanks,
    Ajay.

  • BEx Analyzer comments in ABAP Runtime?!

    Hallo, we are using BEx 7.3 in ABAP Runtime (only ABAP Stack). In BEx Analyzer we want to use comments functionality to upload a Word or Excel Document for comments, but the Document Browser we are getting is of BEx 3.x which doen't provide the Button to uplaod the Word/Excel Documents. According to SAP in ABAP Runtime there is no way to upload Word/Excel Documents through BEx Analyzer comments functionality. Ist there any work arround?? Can any body hepl on this issue?
    Many thanks in advance,
    Regards
    Mansoor

    Hallo Anass,
    thanks for your reply but the Link to SAP-Library shows the document about the Documents Browser in Portal, JAVA Runtime. But we don't have JAVA / Portal environment, we have only ABAP Stack.
    The T-Code does not help, cause the BEx Analyzer version we are using is BEx 7.3. It is only the Document Browser which is of 3.x version, because according to SAP Helpline the BEx Analyzer in ABAP Runtime works only with 3.x Document Browser.
    Does anybody know a work around to upload the Word documents?
    Any how many thanks.

Maybe you are looking for