High sea purchase and sale

dear all
can anybady furnish how to address high sea pruchasing process?
this is very urgent requirement for my client?
Rgs
mrs

For high sea purchase create a dedicated sales document type ans customize in such a way it can be billed based on MIRO document instead of PGI.
Then create an PO to the customer based on SO,
Raise an MIRO document based on PO rather  than GR/IR , then create Sales billing document based on MIRO document.

Similar Messages

  • High Sea Purchase

    Dear Experts
    I want to map high sea purchase cycle in the system.this is basically a typical indian procurement scenario where vendor A procures imported material on behalf of myself from imported vendor and sells it to me.Here condition is all the custom duties would be paid from my end.
    How can i map this scenario please guide.
    Thanks In Advance.
    Regards
    Muthuraman.K

    Hi,
    We can create virtual plant as Highseas and create purchase order for this plant with the basic price.
    Do the GRN after receipt of the material.
    Create stock transport order at the actual plant with different condition types to load the costs on the material in the STO.
    Do the stock tranfer posting with refrence to the STO.
    Thanks,
    padmaja n

  • Which are the most popular reports in SAP BI for Purchasing and Sales

    Hi Experts,
    I'm looking to work on one completed BI content flow.
    I wanted to work on 1 report from each module to activate the relevant objects.
    Can anyone please let me know which reports in Purchasing and Sales are frequently used in SAP BI.
    Thanks

    Hi,
    Please check table - RSRREPDIR       
    Report names which are related to purchasing  - 0PUR_C0N_Q00Y, N and Y indicates number.
    same for sales report names - 0SD_C0N_Q00Y .
    Query tech names - 0PUR_C01_Q0021
    Thanks

  • Excise Invoice for Purchase and Sales

    Dear All,
          I am getting the problem regarding excise invoice for Purchase and Sales.
         In item master i Define the item as Excisiable, that item having Purchase and Sales.
        For Purchases I am going to post the Incoming Excise Invoice but
       Same material at the time of selling I don't wannt make the Outgoing excise Invoice
      In this scenario how i make the settings in Item Master Data and How can i Prepare the Excise or Modvat Groups in SAP B1.
            Please guide to me
    Best Regards,
    K.Prasad,
    +919921525560.
    [email protected]

    Hi Prasad,
    Greetings,
    Functionaly if the item is excisable when purchase that has to be sold as excisable item ie.. credit the duty when purchase and debit the duty when sales depends upon your client(B1 user).  If your client (B1 user) is a manufacturing unit, they will take the excise duty and deduct while sell.  But if your client is not a excise assessee just they do trading, don't tick the excisable item, eventhough that is an excisable item, since they are not all use excise duty for their business.
    In this scenario they no need to create excisable invoice for both purchase and sales.
    Hope this will help you,
    Venkatesan G.

  • Column report for purchase and sales

    Dear Experts
    I would like to create column report like Doc No, Item Description, vat 4%, VAT 12.5%, CST 2%, BED, CESS, HRCESS.
    The above mentioned report has to made tax wise purchase and sales.
    What is the table i have to take please help me.

    Hi Asupathy Raja,
    Check the thread
    Report -list of all the purchases - TAX Catg.wise/ Item Group wise
    *Close the thread if issue solved.
    Regards
    Jambulingam.p

  • Purchase and sales flow resulting from 'production in other plant'.

    Dear all,
    When using the procurement type 'P' (production in other plant), materials are consumed in plant A and goods receipts from production order happens in plant B.
    When plants A and B belong to different company codes, SAP generates a cross-company document. Within the receiving company, the offsetting account for the stock account is the cross-company clearing account.
    This posting is generally not sufficient as legal and tax requirements ask for a sales and purchasing flow between the 2 company codes. Therefore many companies need to 'develop a solution' to complete this posting 'after the facts'.
    Does anybody know whether this additional posting exists under the form of an 'add-on' or additional solution to the standard made available by one or another partner of SAP ? Note that the starting point for this question is important : our company wants to use the 'production in other plant' flow because the native purchase and sales flows are too much time consuming.
    Thanks for your help.
    José Beghein

    Hi all,
    I want to be a bit more accurate here :
    The produced material in plant B has a special procurement type code (MARC-SOBSL) which in its definition contains procurement type E (BESKZ) and special procurement P (ESOBS). It is special procurement P that triggers the 'production in other plant' behaviour. The production plant (WRK02) is also specified in the definition of the special procurement type code.
    Kind regards.
    José Beghein

  • Purchase And Sales Account

    Hi Experts,
    We have two accounts namely "Purchase Account" containing all taxes groups related to purchase and "Sales Account " containing all taxes group related to sales  in our old system.. Under which account -Asset, Liabilty, Expenditure, Expense, Equity -will these two accounts be opened in SAP B1 2007 B

    hii
       Purchase account is kept in Expendirure Draw
       Sales account in Revenue Draw ( to get the most specific results)
    you can  difine this two accounts with ur related transanctions, like for suppose for diffrent kind of purchases in purchases account,
                                                            thanks RIYAZ

  • SAP Treasury - Link a Purchase and Sale of an OTC transaction

    Hello All
    We have implemented SAP OTC transactions (51A, 52A, 53A and 55A). We did not have the requirement to sell them when they were set up. However we got the requirement recently. We need to link the purchase and sale of a transaction and record the realized gain and loss. I dont see a way to link OTC transactions and there by post the realized gain and loss.
    Example:
    If we buy a commercial paper (53A) on Jan 1 2014 maturing Oct 31, 2014 for a nominal amount of 10,000 at 98% payment rate, which will generate a payment flow of 9,800 on Jan 1 2014.
    Now if we decide to come out of it (sell) on June 30, if the rates went down and we only get 9,000 of the nominal amount for the sale.
    How can we have the system link these 2 to determine that we incurred a realized loss in this case?
    Hove anyone had this situation before? Any help on this topic with be much appeciated and points will be rewarded.
    Thanks in advance!!
    Shilpa

    Try TBR6 to link; may be reference category "REF"; then, from each transaction, you can go to Environment-Object links and see the linked transaction.
    However, I don't know off hand, if it will let you do realized gain/loss on a net basis; in that case may be Securities module would be the solution.
    Mani

  • Purchase and Sale scenarion in TD- Error

    Hi Experts,
    Need help!!
    I am trying to run a purchase and sale scenario in TD.
    so while assigning a Shipment notification in TD shipment and making it load relevant, I get the following error.
    *Inbound delivery 180000006 item  must no be relevant for goods movement.*
    regards,
    Vini

    I think it is possible,as per my knowlwdge our perious client regularly( means every 3-4 months) copied the data from Production server to quality server. by the help of basic person...
    So in your case you want to copied the data from devlopment server to production server....please touch with your basic guy, i think he will help out reagrding this...

  • Freight for Purchase and sales process

    Hi,
    I have a scenario where i'll purchase material with Freight charges from the Vendor, Now the same freight charge i'll imposed on customer while billing.
    I'll be using same Freight GL account for both purchase and sales process.
    I have configured the process by assigning same GL in the account keys in the pricing procedure for Purchase and sales process for the Freight condition.I have tested the scenario and i was very confused.
    Scenario:
    i have created a PO and made GR, the accounting entries were,
    Stock account ...........Dr.
    GR/IR................Cr.
    Freight...........Cr.
    While performing invoice verification the accounting entries are,
    Vendor.......... Cr.
    GR/IR........ Dr.
    Freight....... Dr.
    Accounting entries during Billing to customer,
    Customer.......Dr
    Sales.......Cr.
    Freight......Cr.
    Freight......Dr.
    Let say for Purchase and Sales process i have used GL 600016 as Freight account.
    IF i have paid Rs 500 for Freight to vendor, then i'll be imposing an amount of Rs 500 to customer as freight charges.
    Please guide if i had made any mistake in configuring the process
    also please advice is there any way to check the GL balance, like the amount to be collected from customer as freight as i'll be using same GL.
    Regards,
    Rahul

    Hi all ;
    SD process is not logical with outcome account 600016. For me , you can collect freight costs a different account for sd .
    For sd configurations , you can benefit from belowed path.
    Spro-->SD-->Basic Functions-->Account Assignment/Costing-->Assign G/L Accounts
    Details :
    http://wiki.scn.sap.com/wiki/display/ERPLO/Revenue+Account+Determination+-+Configuration
    Account Determination - Billing (SD-BIL) - SAP Library
    Regards.
    M.Ozgur Unal

  • Tables of purchase and sales

    please tell me the purchase and sales transaction codes and to this codes name the relevant table these codes are joined up

    Hi.....
      _SALES_
    Sales orders Name Description Uses
    LIKP Shipped Lines header   
    LIPS Shipped Lines detail  
    VBAK Order header Every order (unless archiving)
    VBAP Table fields Every line item (unless archiving)
    VBBE Open sales order line items Great file, but be careful. Contents don't reflect orders that do not affect purchasing (go figure).
    VBEP Schedule line item   
    VBFA Document flow  Let's you move from order to shipping document to invoice.
    VBUK Order status   
    VBUP Line item detail status   
    VBFK Invoicing header   
    VBFP Invoicing detail
    PURCHASE
    Purchasing Name Description Uses
    EINA Purchasing inforecord  by MATNR/LIFNR contains things like vendor material number and access key for EINE 
    EINE Purchasing inforecord detail  Contains minimum purchase, group, currency 
    EKPO Purchase orders   
    EKET Scheduled lines   
    EKES Vendor confirmed lines 
    Sravani.
    Plz reward points if useful.

  • Excise form Purchase and Sales side

    Hi,
    Can some one guide me the Purchase side Excise through PO and Sale side Excise. It would be thankfull if some one can give me T code from Purchase side and Sales side.
    Points will awarded.
    Thanks,
    Pallavi

    Hi Prasad,
    Greetings,
    Functionaly if the item is excisable when purchase that has to be sold as excisable item ie.. credit the duty when purchase and debit the duty when sales depends upon your client(B1 user).  If your client (B1 user) is a manufacturing unit, they will take the excise duty and deduct while sell.  But if your client is not a excise assessee just they do trading, don't tick the excisable item, eventhough that is an excisable item, since they are not all use excise duty for their business.
    In this scenario they no need to create excisable invoice for both purchase and sales.
    Hope this will help you,
    Venkatesan G.

  • BOM Details in to a Purchase and Sales Documents

    Hi
    How to get BOM Details in to a Purchase and Sales Documents (With COmponentItems Details).

    Hi Chakrapani Bandaru,
    According to our knowledge, only BOM of 'Sales' type can be displayed with its components together in Sales documents. But this kind of BOM can not be selected in Purchase documents since they can not be 'Purchased Item' (Item Master Data).
    Additionally, BOM of 'Template' type can also display its components in Sales/Purchase documents, but in a different way. The parent and its children are parallel in the documents.
    Regards,
    Candice Ren
    SAP Business One Forums Team

  • High Sea Purchases

    Hi,
    How we have to perform highsea purchase (inclusion of Import duties) in domestic scenario.
    Regards
    Mohan

    First of all why you want this scenario to be incorportaed in Domestic Pricing?
    I suggest you to include this in the Imported Pricing structure.
    During High Sea sales their is a contract value. If the contract value is higher then assesable value then all duties will be applicable on contract values only and if less then on assesable value.
    You have to maintain a condition type for manual entry of contract value and all the taxes will be applicable on this value only. Assign this condition type an access sequence so that it is considered only during specific requirement.
    If you have some specific requirement please mention in detail
    Enjoyyyyyyyyy
    Akshit

  • Last purchase and sales price

    Dear Experts,
    I do require a report in which we can compare last purchase vs sales price of same item.
    Item Code,  description, last purchase rate, last sales rate ,     Profit  ,     %
    1234 ,            furniture   ,   1500.00  ,             1800.00  ,            300.00 ,    20%
    I can find last purchase price from master data but couldn't find last sales price.
    Any inputs will be highly appreciated.
    Regards,
    Ravi

    Hi,
    Try this query:
    SELECT case when T1.[ObjType] = 17 then 'OR' end as DocType,
    T1.[DocNum], T0.[CardCode], T1.[DocDate], T2.[ItemCode], T2.[Dscription], T2.[Quantity], T2.[Price] FROM OCRD T0 INNER JOIN ORDR T1 ON T0.CardCode = T1.CardCode INNER JOIN RDR1 T2 ON T1.DocEntry = T2.DocEntry WHERE T2.[ItemCode] = [%0] and T0.[CardCode] = [%1] Group by T1.[DocNum], T0.[CardCode], T1.[DocDate], T2.[ItemCode], T2.[Dscription], T2.[Quantity], T2.[Price],T1.[ObjType]
    union all
    SELECT case when T1.[ObjType] = 15 then 'DN' end as DocType,T1.[DocNum], T0.[CardCode], T1.[DocDate], T2.[ItemCode], T2.[Dscription], T2.[Quantity], T2.[Price] FROM OCRD T0 INNER JOIN ODLN T1 ON T0.CardCode = T1.CardCode INNER JOIN DLN1 T2 ON T1.DocEntry = T2.DocEntry WHERE T2.[ItemCode] = [%0] and T0.[CardCode] = [%1] Group by T1.[DocNum], T0.[CardCode], T1.[DocDate], T2.[ItemCode], T2.[Dscription], T2.[Quantity], T2.[Price],T1.[ObjType]
    union all
    SELECT case when T1.[ObjType] = 23 then 'QT' end as DocType,
    T1.[DocNum], T0.[CardCode], T1.[DocDate], T2.[ItemCode], T2.[Dscription], T2.[Quantity], T2.[Price] FROM OCRD T0 INNER JOIN OQUT T1 ON T0.CardCode = T1.CardCode INNER JOIN QUT1 T2 ON T1.DocEntry = T2.DocEntry WHERE T2.[ItemCode] = [%0] and T0.[CardCode] = [%1] Group by T1.[DocNum], T0.[CardCode], T1.[DocDate], T2.[ItemCode], T2.[Dscription], T2.[Quantity], T2.[Price],T1.[ObjType]
    union all
    SELECT case when T1.[ObjType] = 13 then 'AR' end as DocType,T1.[DocNum], T0.[CardCode], T1.[DocDate], T2.[ItemCode], T2.[Dscription], T2.[Quantity], T2.[Price] FROM OCRD T0 INNER JOIN OINV T1 ON T0.CardCode = T1.CardCode INNER JOIN INV1 T2 ON T1.DocEntry = T2.DocEntry WHERE T2.[ItemCode] = [%0] and T0.[CardCode] = [%1] Group by T1.[DocNum], T0.[CardCode], T1.[DocDate], T2.[ItemCode], T2.[Dscription], T2.[Quantity], T2.[Price],T1.[ObjType]
    union all
    SELECT case when T1.[ObjType] = 16 then 'SR' end as DocType,
    T1.[DocNum], T0.[CardCode], T1.[DocDate], T2.[ItemCode], T2.[Dscription], T2.[Quantity], T2.[Price] FROM OCRD T0 INNER JOIN ORDN T1 ON T0.CardCode = T1.CardCode INNER JOIN RDN1 T2 ON T1.DocEntry = T2.DocEntry WHERE T2.[ItemCode] = [%0] and T0.[CardCode] = [%1] Group by T1.[DocNum], T0.[CardCode], T1.[DocDate], T2.[ItemCode], T2.[Dscription], T2.[Quantity], T2.[Price],T1.[ObjType]
    union all
    SELECT case when T1.[ObjType] = 14 then 'AR' end as DocType,
    T1.[DocNum], T0.[CardCode], T1.[DocDate], T2.[ItemCode], T2.[Dscription], T2.[Quantity], T2.[Price] FROM OCRD T0 INNER JOIN ORIN T1 ON T0.CardCode = T1.CardCode INNER JOIN RIN1 T2 ON T1.DocEntry = T2.DocEntry WHERE T2.[ItemCode] = [%0] and T0.[CardCode] = [%1] Group by T1.[DocNum], T0.[CardCode], T1.[DocDate], T2.[ItemCode], T2.[Dscription], T2.[Quantity], T2.[Price],T1.[ObjType]
    Thanks & Regards,
    Nagarajan

Maybe you are looking for