Excise Invoice for Purchase and Sales

Dear All,
      I am getting the problem regarding excise invoice for Purchase and Sales.
     In item master i Define the item as Excisiable, that item having Purchase and Sales.
    For Purchases I am going to post the Incoming Excise Invoice but
   Same material at the time of selling I don't wannt make the Outgoing excise Invoice
In this scenario how i make the settings in Item Master Data and How can i Prepare the Excise or Modvat Groups in SAP B1.
        Please guide to me
Best Regards,
K.Prasad,
+919921525560.
[email protected]

Hi Prasad,
Greetings,
Functionaly if the item is excisable when purchase that has to be sold as excisable item ie.. credit the duty when purchase and debit the duty when sales depends upon your client(B1 user). If your client (B1 user) is a manufacturing unit, they will take the excise duty and deduct while sell. But if your client is not a excise assessee just they do trading, don't tick the excisable item, eventhough that is an excisable item, since they are not all use excise duty for their business.
In this scenario they no need to create excisable invoice for both purchase and sales.
Hope this will help you,
Venkatesan G.

Similar Messages

Freight for Purchase and sales process

Hi,
I have a scenario where i'll purchase material with Freight charges from the Vendor, Now the same freight charge i'll imposed on customer while billing.
I'll be using same Freight GL account for both purchase and sales process.
I have configured the process by assigning same GL in the account keys in the pricing procedure for Purchase and sales process for the Freight condition.I have tested the scenario and i was very confused.
Scenario:
i have created a PO and made GR, the accounting entries were,
Stock account ...........Dr.
GR/IR................Cr.
Freight...........Cr.
While performing invoice verification the accounting entries are,
Vendor.......... Cr.
GR/IR........ Dr.
Freight....... Dr.
Accounting entries during Billing to customer,
Customer.......Dr
Sales.......Cr.
Freight......Cr.
Freight......Dr.
Let say for Purchase and Sales process i have used GL 600016 as Freight account.
IF i have paid Rs 500 for Freight to vendor, then i'll be imposing an amount of Rs 500 to customer as freight charges.
Please guide if i had made any mistake in configuring the process
also please advice is there any way to check the GL balance, like the amount to be collected from customer as freight as i'll be using same GL.
Regards,
Rahul

Hi all ;
SD process is not logical with outcome account 600016. For me , you can collect freight costs a different account for sd .
For sd configurations , you can benefit from belowed path.
Spro-->SD-->Basic Functions-->Account Assignment/Costing-->Assign G/L Accounts
Details :
http://wiki.scn.sap.com/wiki/display/ERPLO/Revenue+Account+Determination+-+Configuration
Account Determination - Billing (SD-BIL) - SAP Library
Regards.
M.Ozgur Unal

Accounting entries for excise invoice for purchase returns in J1IS

Dear Friends
1) I recorded an excise invoice for goods receips in J1IEX . The accounting entry is
Input BED a/c   DR
Input ECS a/c   DR
Input H.css A/c   DR
CENVAT clearing   CR
2) There were some damaged items and same returned to vendor. I did RETURN Delivery in MIGO. The excise invoice in J1IS gives error " BALANCE IN TRANSACTION CURRENCY". Here I used Ref document type - MATD
QUESTION :
What is the Excise transaction type   for ' other outward movement' in J1IS to which I should assign the excise accounts   to reverse    (1) above. Is it OTHR or GPRO.
Thanks
kamala

Dear Mathews,
It is not capital goods. Also if I do a JV in J1IH, the entry goes and is as below :
Cenvat clrg   DR,   Input -BED /E.cess/ S.cess   CR
But J1IS does not save, though I have assigned all said accounts in 'Excise accts per excise transation'   for OTHR. Also I read in wiki that the entry for purchase return excise inv in J1IS is ' CENV CLRG ....DR ,   CENV RECEIVABLE ...CR ' .If so, then do i creat new GL for Cenv Receivable ? What is its effect on FORTNIGHTLY UTILIZATION
thanks for telling
kamala
Edited by: Kamala Surianarayanan on Mar 6, 2009 6:38 AM
Edited by: Kamala Surianarayanan on Mar 6, 2009 6:38 AM

Which are the most popular reports in SAP BI for Purchasing and Sales

Hi Experts,
I'm looking to work on one completed BI content flow.
I wanted to work on 1 report from each module to activate the relevant objects.
Can anyone please let me know which reports in Purchasing and Sales are frequently used in SAP BI.
Thanks

Hi,
Please check table - RSRREPDIR
Report names which are related to purchasing - 0PUR_C0N_Q00Y, N and Y indicates number.
same for sales report names - 0SD_C0N_Q00Y .
Query tech names - 0PUR_C01_Q0021
Thanks

Column report for purchase and sales

Dear Experts
I would like to create column report like Doc No, Item Description, vat 4%, VAT 12.5%, CST 2%, BED, CESS, HRCESS.
The above mentioned report has to made tax wise purchase and sales.
What is the table i have to take please help me.

Hi Asupathy Raja,
Check the thread
Report -list of all the purchases - TAX Catg.wise/ Item Group wise
*Close the thread if issue solved.
Regards
Jambulingam.p

Excise form Purchase and Sales side

Hi,
Can some one guide me the Purchase side Excise through PO and Sale side Excise. It would be thankfull if some one can give me T code from Purchase side and Sales side.
Points will awarded.
Thanks,
Pallavi

Hi Prasad,
Greetings,
Functionaly if the item is excisable when purchase that has to be sold as excisable item ie.. credit the duty when purchase and debit the duty when sales depends upon your client(B1 user). If your client (B1 user) is a manufacturing unit, they will take the excise duty and deduct while sell. But if your client is not a excise assessee just they do trading, don't tick the excisable item, eventhough that is an excisable item, since they are not all use excise duty for their business.
In this scenario they no need to create excisable invoice for both purchase and sales.
Hope this will help you,
Venkatesan G.

Creation of Excise Invoice for Sample Sales

Hi Gurus,
When i create excise invoice for sample sales against the invoice the excise duties are not capturing it is showing as zero value. Can you give suggestions to solve this.
Regards
Kiran

If the excise values flowing in billing document but not in excise document, then you need to check in the following IMG
Logistics-General --> Tax on Goods Movements --> India --> Account Determination.
There you have to maintain the respective G/L accounts for excise and also in the next tab you have to specify the G/L Accounts per Excise Transaction.
For information, for outgoing excise invoice, the excise transaction type would be DLFC.
thanks
G. Lakshmipathi

Excise Invoice for Service Sales

Resp. sir,
I have created sales order of service and bill. So if i want to take credit of excise duties system does not allowing me to do J1IIN. giving error material is not relevant for delivery. Please guide me in this case.
Thanks in advance

As per my analysis, there is no need of excise invoice creation. And for service tax we can utilize during J2IUN.

Error in Creating Excise Invoice for Factory Sale

Dear Friends:
Using T.code J1IIN ( Create Excise invoice for Factory Sale), I entered data for billing doc,posting date,sub transaction type & pressed enter and tried to save it.I got the error 'Error in allocating internal document number interval not found number object J_1IINTNUM'.
Using T.code J1I9, I used the number object J_1IINTNUM and created number ranges and again tried to save T.code J1IIN ( Create Excise invoice for Factory Sale), but still i am getting the same error.
Please let me know how to solve the error. This will be highly Appreciated.
Srinu NV

Hi,
In Excise Invoice, there is always an internal number range which is required to be maintained. This is maintained through Transaction Code: SNRO & object being J_1IINTNUM . As soon as you maintain the same, it will resolve the error.
I learned the above by commiting a same mistake in one of the project.
Regards,
Rajesh Banka
Reward points if helpful.

Create Excise invoice for Factory Sale problem

Dear Friends:
Using T.code J1IIN ( Create Excise invoice for Factory Sale), I entered data for billing doc,posting date,sub transaction type & pressed enter and tried to save it.I got the error 'Error in allocating internal document number interval not found number object J_1IINTNUM'.
Using T.code J1I9, I used the number object J_1IINTNUM and created number ranges and again tried to save T.code J1IIN ( Create Excise invoice for Factory Sale), but still i am getting the same error.
Please let me know how to solve the error.Please explain in detail.This will be highly Appreciated.
Thanks
Sridhar

Hi Sridhar,
Can you please let me know whether your issue is resolved. If yes, Can you please specify the solution.
I am facing the same error now and I am not able to figure out the reason for it.
Regards,
Srinu NV

Any standard SMARTFORMS available for purchase order, sales order, invoice

Hi,
Any standard SMARTFORMS available for purchase order, sales order, invoice ?
RR.

Hi Rama,
Goto NACE tcode-> choose the application u want( like billing for invoice, PO)->output type->output type->processing routineon left side
Here u will find the standard program name and smartform .
Hope it helps.
Regards,
Sonika

Excise Invoice for Partly Returned Quantity

Dear Experts,
My Client is into Trading of Goods & we are updating RG23D register for Purchases & Sales.
After Delivery we create Excise Invoice with T-Code J1IJ & extract & print it thru J2I5 7 J2I6.
In past in case of Returns we simple used to cancel the entire Excise Invoice.
But now I have a scenario, where we sold 10 Tons of material to Customer & issued Excise Invoice against the same. But the Customer has returned only 2 tons out of the total 10 tons.
Please suggest how to cancel Excise Invoice for part quantity.
Thanks,
Jignesh Mehta.

Please suggest how to cancel Excise Invoice for part quantity.
Dear Jignesh - you should not cancel the excise invoice for returns. You should always use J1IH for making the following excise adjustments.
Customer Credit
Choose the Additional excise input the original excise invoice reference, document year, company code, plant and excise group and execute. There input manually what value you need to give credit and save.
Excise Debit
Choose Other Adjustment and here also, maintain the datas whatever you input as above and save.
thanks
G. Lakshmipathi

How do we raise Incoming Excise invoice on Vendor1 and A/P Invoice on Vendo

Hi All,
How do we raise Incoming Excise invoice on Vendor1 and A/P Invoice on Vendor2 for a single purchase order?
The Scenario: PO is raised on Vendor2 for certain goods excisable and Vendor2 is not registered under Excise hence i cannot get Incoming excise invoice from Vendor2 or I cannot raise Excise invoice in B1 on the name of Vendor2.
But
the same goods (which are excisable) were already supplied by Vendor1 to Vendor2. So here the excise invoice is coming from Vendor1 and A/P Invoice from Vendor2 how this is actually handled in Business One? How do we show the A/P Invoice amount due on Vendor2 and the Excise Passed from Vendor1?
Thanks
SV Reddy

Hi Thanga Raj,
what you said is works only for payment consolidation. where in a particular purchase two vendors are involved, the tax updates should go into relevant vendor master data. in the above case excise is updated in the vendor1 account and RG23 also should be generated on the name of Vendor1.
Since you already raising incoming excise invoice on the name of Vendor1 you also need to raise A/P Invoice on Vendor1 (this is mandatory, from the goods receipt PO when you click copy to Incoming Excise Invoice and A/P Invoice the system automatically inserts "Vendor1")
but how do you update the Vendor2 account only for the A/P Invoice VAT portion. Because in reality the VAT you are paying to Vendor2 since you need to raise the a/P Invoice on the name of Vendor2. it is not actually happening in business one. If you try to raise A/P Invoice on Vendor2 from this Goods Receipt PO, initially the system copies Vendor1 from GRPO and if you change and try to add the invoice on Vendor2 name, the system will ask you to create a serial number again if the item is excisable. here the work is duplicated for the same item you already created a serial number while you creating the Goods Rectipt PO from Vendor1.
Any body knows any other scenario please help me.
Thanks
SV Reddy

Excise Invoice for Exports

Hi Gurus,
I have scenario of Exports under bond,Deemed export,Exports to Nepal and Bhutan.
I have maintained one series group and one excise group for the plant where manufacturing and sales is done.
When I am creating ARE for this excise invoice for exports system displaying info,"Excise invoice not meant for exports'?
Why this error?
Please reply,it's urgent.
Thanks in advance

Hi Vasantha
The Excise Transaction type for Exports should be <b>DLFC</b>.
Check the settings for DLFC transaction with respect to excise Group in IMG, select Logistic general --> Tax on Goods Movement --> India --> Account Determination --> specify G/L account per Excise transaction.
Thanks
G. Lakshmipathi

Excise invoice for price difference required with material code

Hi
In my scenario, we have charged less amount to customer at the time of sales.
For ex: Sales order was prepared for Rs.10000 and relevant excise duty was (@ 10% was charged). We did delivery and billing. We issued excise invoice as per Rs.10000 and relevant excise duty on it.
But actual basic price is 10100. We will charge Rs.100 and we have to charge relevant excise duty on it. However there will be no material movement.
1st i posted Debit note to customer with FB70 with following entry:
Customer A/c.. Dr 110 (100 + 10% excise)
To Sales A/c 100
To Excise Paid A/c 10
Then i went to J1IH and gave FB70 document reference. Following entry was posted
Excise Paid A/c... Dr 10 (This amount i gave manually which is OK)
To Excise Duty Receivable 10
Now my doubts:
1. How to credit Excise Duty Payable in J1IH. Which transaction type i need to check for it (DIEX or OTH, etc)
2. How should i take print of excise invoice (for above J1IH). My material number should also get printed on invoice. But i am not specifying any material in J1IH
3. 2. Can i create separate transaction type and then use it to J1IH. If yes then how to create and assign

Hi Tanveer
I did following steps based on you input
VA01 - Created Debit Memo no. 3
VF01 - Billing Number: 130012001 and accounting document number: 100000248.
J1IS - Clicked on create icon. Entered billing number 130012001, transaction type as OTHR and other CIN related details.
It went to next screen. In that screen manually gave material code, units assesable value, chapter id, Basic Ex duty, Ecess and SHEC.
After giving it gave prompt: Excise Duty will be recalculated. I clicked on YES.
Entire line item got deleted and nothing happened.
Please help how to proceed in J1IS with above mentioned data. Which all field needs to be filled in J1IS.
Please help.
Edited by: Meenu_ND on Jan 23, 2012 2:54 AM
Edited by: Meenu_ND on Jan 23, 2012 2:55 AM

Excise Invoice for Purchase and Sales

Similar Messages

Maybe you are looking for