Hit Send Button - No Response, No Error message

After composing a message, I hit Send and the Mail app simply does not respond. It isn't frozen - no spinning ball or progress arrows - it just sits there. I have repaired/verified the disk and also repaired disk permissions. I have also created a new virgin user account with the same Mail settings and Mail WORKS FINE. So there appears to be a problem within this user account. I have also tried deleting the com.apple.mail.plist file - still no luck.
Any suggestions on how to proceed?

Can you compose the message normally in Mail? What is your Mail > Preferences > Composing > Check spelling setting? Set it to Never, restart Mail, and see whether that makes a difference. If it does, the problem is some Launch Services cache or preferences corruption that affects the ability of Mail to use the built-in spell checker.
The following article describes how to manually reset Launch Services — the notes at the bottom of the article also provide information about the side effects of deleting each of the files involved:
Resetting Launch Services
If you prefer using a cache cleaning utility instead of following the manual procedure described in the previous article, take a look at this other article for general troubleshooting and cache-cleaning procedures:
Resolving Disk, Permission, and Cache Corruption
The most appropriate utility for this particular problem probably is Tiger Cache Cleaner, but you may also want to consider other utilities, such as OnyX, or Cache Out X, which are free. Whatever utility you choose, be sure to read this first:
Side effects of System cache cleaning
As an example, this is how you should proceed with OnyX:
1. Quit all applications.
2. Launch OnyX and enter your administrator password.
3. Go to Maintenance > Reset and check LaunchServices database.
4. Un-check any other pre-checked options.
5. Click the Execute button.
6. Restart the computer.

Similar Messages

Can receive email, but can't send....getting error message

I can receive email just fine...but when I try to send email I get this error message:
"This message could not be delivered and will remain in your Outbox until it can be delivered.
The connection to the server "smtp.mac.com" on port 25 timed out."
Just started happening a few days ago. Worked fine before then. Any ideas? Reboot / reconnect to isp doesn't help. thanks!

Sounds like your ISP made a recent change regarding the use of an SMTP server that is outside of their network.
Are you also accessing an email account and SMTP server that is provided by your ISP used for connecting to the internet with the Mail.app and if so, are you able to send messages with this account and SMTP server?
If yes to both, try this first.
Go to Mail > Preferences > Accounts and under the Account Information tab for your .Mac account preferences at the SMTP server selection, select the Server Settings button below for the .Mac SMTP server.
Enter 587 in place of 25 in the Server Port field and when finished, select OK to save the changed setting.
If this doesn't work and you are accessing an email account and SMTP server provided by your ISP with the Mail.app and if not, add your ISP's SMTP server to the Mail.app as an available SMTP server to choose from and select/use your ISP's SMTP server to send messages with your .Mac account.

When opening the Coloursync utility and pressing the verify button, I received an error message stating that the Tag 'cprt':Text tag has an incorrect length which could not be fixed as the file is locked. Does anyone know how to rectify this?

When opening the Coloursync utility and pressing the verify button, I received an error message (copy below) stating that the Tag 'cprt':Text tag has an incorrect length which could not be fixed as the file is locked. Does anyone know how to rectify this?
Checking 25 profiles...
/Library/ColorSync/Profiles/Displays/iMac-00000610-0000-9C6C-0000-000004271B00.i cc
   Tag 'cprt': Text tag has an incorrect length.
   The file is locked. Could not be fixed.

Hi guys,
I followed the steps to unlock the .icc file in the "getinfo" screen then went on clicking repair in colorsync utility.
This is the message i got:
Searching for profiles...
Checking 17 profiles...
/Library/ColorSync/Profiles/Displays/Color LCD-00000610-0000-9CF3-0000-000004273CC0.icc
   Tag 'cprt': Text tag has an incorrect length. Fixed.
Repair done - 1 profiles fixed.
However, when i hit verify again it shows up like this:
Searching for profiles...
Checking 17 profiles...
/Library/ColorSync/Profiles/Displays/Color LCD-00000610-0000-9CF3-0000-000004273CC0.icc
   Tag 'cprt': Text tag has an incorrect length.
Verify done - found 1 bad profile.
... and it keeps like this sine die.
when i open the .icc file it shows up like this:
3     'cprt'     'text'     35     Copyright ASCII Text String
New to mac so I really don't know what to do.
I didn't get this message so far. What i did before getting this message was to open a jpeg file. I wanted to edit it so when i did right click on the file i went to open with, and colorsync came as an option; so i chose it.
Then this message started comming up.
Is there anything i can do?
Thabks for the support.

Lightroom trial doesn't show complete menu selections or import button. Also get error message on launch: An error occurred when attempting to change modules. I am unable to find/see the following file to try renaming the SLCache and SLStore files: Sy

Lightroom trial doesn't show complete menu selections or import button. Also get error message on launch: An error occurred when attempting to change modules. I am unable to find/see the following file to try renaming the SLCache and SLStore files: System Library/Application Support/Adobe. Any ideas? I only have 16 days left on the trial and have been unable to get it to work on my Macbook Pro. This is all I am seeing after Lightroom opens. Thanks!

Thanks to both of you for attempting to help. I finally figured out what was wrong . . . it was a Permissions problem. Very frustrating, but after scouring the troubleshooting tips I finally found the one that solved my problem. I had to add a User and give it Read/Write privileges to Lightroom. The file I had to add the User to was Hidden on my Mac, so that added an even bigger challenge to the mystery. Only a few days left on my trial version! I hope I have time to try it out!

I bought the Dreamweaver CS5 for Windows a few years ago. Now I have also a Mac Book pro, where I have to Install the Dreamweaver CS5. I have made the Download for Mac, but I can't Install it. When I push the button, I got an error message.

I bought the Dreamweaver CS5 for Windows a few years ago. Now I have also a Mac Book pro, where I have to Install the Dreamweaver CS5. I have made the Download for Mac, but I can't Install it. When I push the button, I got an error message.

CS5 for Windows can only be installed on Windows operating system.
You would need to purchase CS5 for Mac OS.
Given that CS5 is now 4 versions back, it's unlikely you'll find a copy.
You could get DW CC from the Creative Cloud which supports both Win/Mac platforms.
Creative Cloud pricing and membership plans | Adobe Creative Cloud
Nancy O.

Are you guys on the case with the Office 365 glitch everyones reported / querying - no send / reply buttons visible plus Script Error messages?

Script: https://r4.res.outlook.com/owa/15.0.775.9/owa2/scripts/boot.0.mouse.js:91
This is just one of the error messages I suddenly seem to be getting using Office 365 on Firefox on a iMac

Some other info gathered from Microsoft's forums:
(1) [http://community.office365.com/en-us/forums/148/t/190650.aspx Cabt send a reply because send button does not show. - Manage Office 365 - Office 365 - Microsoft Office 365 Community]
Microsoft chimed in and is investigating. These temporary workarounds were noted:
* Zoom out using Ctrl- (I'm not sure whether you can immediately press Ctrl+ to zoom in again, but with many incomplete or interrupted layout problems, you can)
* Disable composing replies in the preview area, forcing replies to start in a new window (Office 365: Options > Settings > "Reading Pane" : "Type in a new window")
* Use "Light Mode": https://outlook.office365.com/owa/?layout=light
(2) [http://community.office365.com/en-us/forums/172/t/191988.aspx Firefox - Outlook no send button when replying / new mail - Office applications - Office 365 - Microsoft Office 365 Community]
These temporary workarounds were noted:
* Right-click an element in the window > Inspect Element, then close the inspector. The user who reported this was using the Firebug extension, but it might work with Firefox's built-in feature as well.
* Full screen: F11 on Windows or Ctrl+Command+f on Mac
* Press Ctrl+Enter to send (Windows? maybe Command+Enter on Mac?)

Mail 2.1.1 recieves but doesn't send mail and gives no error message?

I've an issue with mail on an I-Mac with 2 gig intel core duo running O/S 10.4.9 and mail app version 2.1.1. I was using the machine at my studio for a studio manager. I downsized the studio and gave that machine to my parents who have been using an old G4 I gave them running o/s X and using the mail app for all their e-mailing. I migrated their old system from the G4 to the I-mac via target mode and everything seemed to be working until they tried to type more than one word in the body of the e-mail. once you hit the space bar and try to type another word it just gives an error tone. Also they are not able to send mail but are able to recieve. There is absolutely no error message or tone when you hit send or hit the return key. It just does nothing and gives me no feedback. I have gone through all the settings from the old machine which is sending and recieving mail as it has for the last 3 years with out incidence. I've updated the software, verified and repaired the disk and permissions. They are using RCN as their ISP with a cable modem. Again the G4 is working as it should with the exact same settings that the I-mac is configured with. Is there some issue with the older intel machines? Any help would be greatly appreciated. thanks,
-Russ

This problem in Mail is usually caused by some Launch Services cache or preferences corruption that affects the built-in spell checker. The following article describes how to manually reset Launch Services — the notes at the bottom of the article also provide information about the side effects of deleting each of the files involved:
Resetting Launch Services
If you prefer using a cache cleaning utility instead of following the manual procedure described in the previous article, take a look at this other article for general troubleshooting and cache-cleaning procedures. Actually, you should also verify/repair the startup disk (not just permissions), as described there:
Resolving Disk, Permission, and Cache Corruption
The most appropriate utility for this particular problem probably is Tiger Cache Cleaner, but you may also want to consider other utilities, such as OnyX, or Cache Out X, which are free. Whatever utility you choose, be sure to read this first:
Side effects of System cache cleaning
As an example, this is how you should proceed with OnyX:
1. Quit all applications.
2. Launch OnyX and enter your administrator password.
3. Go to Maintenance > Reset and check LaunchServices database.
4. Un-check any other pre-checked options.
5. Click the Execute button.
6. Restart the computer.

Multiple hotmail accounts but one will not send mails and gives no error messages

I have four hotmail accounts on my iPad (me, kids, wife) and we have all been using them fine however, my wife's hotmail account will not send mails. I get no error messages at all for this to explain why, it just doesn't reach the intended recipient and does not turn up in the sent mail folder.
I have deleted the account and re installed using a number of the choices including other outlook and even tried yahooing no change.
Can anyone assist.
I am on the latest iOS
Thanks

This problem in Mail is usually caused by some Launch Services cache or preferences corruption that affects the built-in spell checker. The following article describes how to manually reset Launch Services — the notes at the bottom of the article also provide information about the side effects of deleting each of the files involved:
Resetting Launch Services
If you prefer using a cache cleaning utility instead of following the manual procedure described in the previous article, take a look at this other article for general troubleshooting and cache-cleaning procedures. Actually, you should also verify/repair the startup disk (not just permissions), as described there:
Resolving Disk, Permission, and Cache Corruption
The most appropriate utility for this particular problem probably is Tiger Cache Cleaner, but you may also want to consider other utilities, such as OnyX, or Cache Out X, which are free. Whatever utility you choose, be sure to read this first:
Side effects of System cache cleaning
As an example, this is how you should proceed with OnyX:
1. Quit all applications.
2. Launch OnyX and enter your administrator password.
3. Go to Maintenance > Reset and check LaunchServices database.
4. Un-check any other pre-checked options.
5. Click the Execute button.
6. Restart the computer.

Emails send before I hit send button

Since downloading Mountain Lion, sometimes my emails get sent before I have a chance to finish them and I have not hit the send button. Right in the middle of a sentence, zooom, the email is gone. What's with that?
Rose

Could you have accidentally hit the keyboard shortcut for sending a message? In previous versions it was Cmd-E, if I remember correctly - I did accidentally send some messages, because I pressed this when I meant Alt-E (for entering and accented character).
In Mountain Lion, this keyboard shortcut is now Cmd-Shift-D, which may be less likely to be used accidentally, but still possible.

I can receive email from my regulare email account but I cannot send. I get an error message that I have to go to settings and enter a password, but when I do the password is there. I have tried re-entering password with the same result.How can I send?

I am able to receive email, but when I try to reply I get an error message to go to settings and enter a password. My password is there and I have re-entered it with no success. How can I enable send feature from my I Phone?

You have to go to SMTP settings for your email account and enter a password there. Sended and receiving are two different activities managed by 2 differet servers, and each may require a separate user ID and password.

Send button not working when text message

When I was texting message with my friends, all of sudden I can't type the respond message unless I have to quit and try to text my friend again. The problem is the box where you typed your message is gray out and "Send" button is inactive or gray out. This problem occurs when I upgraded my iphone 4s to iOS 6.1
Please help.

After Update today, SEND button no longer activates keyboard. I tapped message window area and that activated the keyboard. SEND button worked to send message. (Not sure how to describe that "message window area", but its the area where your message shows as you type.)

Send Button is gone from new message toolbar

I was forwarding a mail message and when I went to "send" it, there was no send button to select. I think thhe default mailbox might have been my defunct .mac address. I toggled the correct email account and still no send button. I rebooted, nothing. The 3 other users all have the send button still.
What happened and how do I get SEND back onto my mail toolbar?

To get the Send button back go to the File menu and select New Message, then go in the View menu and select Customize Toolbar. In the Customize Toolbar drop-down drag the Send button into the New Message toolbar.
Intel Core Duo iMac 17" Mac OS X (10.4.8) 1.5 GB Ram, 160 GB HD, 500 GB OWC Mercury Elite

Can receive but not send emails in Outlook 2010 - error message 0x8DE000006 The operation failed

I an @outlook.com email in my Outlook 2010 which worked well at first.
It now come up with the error message - error message 0x8DE000006 The operation failed and on my Sync Issues it has the following note:
19:35:57 Error: 3209. Server. We noticed some unusual activity in your Hotmail account. To help protect you, we've temporarily blocked your account..
19:35:57 Contact Support (with the live link which brought me here)
Which brought me here......any support would be amazing! Thanks

19:35:57 Error: 3209. Server. We noticed some unusual activity in your Hotmail account. To help protect you, we've temporarily blocked your account..
From this message, it seems that your Outlook.com account is blocked due to some unusual activity. Please first try login to your webmail and check if you can send emails from there. If you can't send email even from webmail, we may try to follow the following
instructions to unblock your account to resolve the issue:
http://windows.microsoft.com/en-IN/windows/outlook/account-temporarily-blocked
Hope this helps.
Regards,
Steve Fan
TechNet Community Support
It's recommended to download and install
Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
programs.
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
[email protected]

I cannot send docs via email constant error message.

Whenever I try to send a document via email i get a constant error message. Any ideas?

Very difficult to help when you don't provide any information.

Mail send issue - Workflow Triggered from Error Message

hi
i am learning workflow and doing some practical sessions using tutorials found on the internet. I have successfully enabled a workflow triggering options from the error message. The workflow will simply send an email and there is nothing else in that workflow definition. When i get the error message i open up the error message window and trigger the workflow option which is enabled. I get a message that the workflow has been started but i dont get the email immediately. I see the emails only after a long time. Infact the emails sent yesterday is only visible today.
i checked in SOST and i dont see the messages at all. If its available in SOST then the system would have picked up and send to the inbox. But i dont see the mails queued in SOST. But if i wait for a day i can see the emails in my inbox. Any idea what is wrong.
~Suresh
Message was edited by:
Suresh Reddy

Hi Suresh
Good on you that you are actually going through the SAP Help and trying the harder but better way unlike many others...your input regarding your problem is also quite well explained....Keep it up!
Coming to your problem,
<b>1.>>I see the emails only after a long time. Infact the emails sent yesterday is >>only visible today.</b>
RSCONN01 is the program that sends email out of SAP, make sure this scheduled to run frequently otherwise you can manually run this from SE/SA38.
<b>2. i checked in SOST and i dont see the messages at all. If its available in SOST then the system would have picked up and send to the inbox</b>
When you run SOST make sure you tick all the checkboxes - Waiting, Errors, Sent and Transmitted. If you are on ECC, then these are available on the Send Status tab...
Good Luck
Ravi

Hit Send Button - No Response, No Error message

Similar Messages

Maybe you are looking for