HKONG: 품목에 대한 serial 정의를 Check하는 방법

PURPOSE
품목에 대한 serial 정의를 Check하는 방법을 기술함.
Explanation
다음의 3가지의 query문을 사용하여 serial정보를 수집할 수 있습니다.
Query 1. data query by org
SQL>Select
ORGANIZATION_ID "ORG_ID" ,
ORGANIZATION_CODE "ORG Code",
decode (SERIAL_NUMBER_TYPE , 1,'1 = uniq in item',
2,'2 = uniq in org',
          3,'3 = uniq across org',
          null, 'NULL') "Serial Number Type",
decode (SERIAL_NUMBER_GENERATION , 1 , ' 1 = At org lev',
               2 , '2 = At Item lev',
               null , 'Null') "Serial Generation",          nvl (AUTO_SERIAL_ALPHA_PREFIX, 'NULL') "Alpha Prefix",
nvl (START_AUTO_SERIAL_NUMBER, 'NULL') "Org Serial"
From MTL_PARAMETERS
Order by ORGANIZATION_ID;
Query 2. Supply the Item name when prompted.
SQL>Select
INVENTORY_ITEM_ID,
ORGANIZATION_ID,
SEGMENT1,
decode (SERIAL_NUMBER_CONTROL_CODE, 1, '1 = No Serial Control',
2, '2 = Predefined serial Number',
     5, '5 = Dynamic entry at INV RCPT',
          6, '6 = Dynamic entry at Sale order issue ',
          NULL, 'Null' ) "Serial Ctrl CODE" ,
START_AUTO_SERIAL_NUMBER,
AUTO_SERIAL_ALPHA_PREFIX
From MTL_SYSTEM_ITEMS_B
Where SEGMENT1 = '&item_name'
Query 3. Supply the Item name and Serial Number when prompted.
SQL>Select
MSI.SEGMENT1,
MSI.INVENTORY_ITEM_ID,
MSN.CURRENT_ORGANIZATION_ID ,
MSN.CURRENT_SUBINVENTORY_CODE,
MSN.CURRENT_LOCATOR_ID ,
MSN.SERIAL_NUMBER,
MSN.PARENT_ITEM_ID ,
MSN.PARENT_SERIAL_NUMBER ,
decode (MSN.CURRENT_STATUS, 1 , ' 1 = Defined but not used',
3 , '3 = Resides in stores',
               4 , '4 = Issued out of stores',
               5 , '5 = Resides in intransit',
               6, '6 = Pending ',
               null, 'Null' ) "Current Status" ,
MSN.REVISION ,
NVL(msn.LOT_NUMBER,-9999) "Lot" ,
NVL(msn.GROUP_MARK_ID,-9999) "GROUP_MARK_ID" ,
NVL(MSN.LINE_MARK_ID, -9999) "LINE_MARK_ID",
NVL(MSN.LOT_LINE_MARK_ID, -9999) "LOT_LINE_MARK_ID" ,
NVl(MSN.COST_GROUP_ID, -9999) "COST_GROUP_ID"
From MTL_SYSTEM_ITEMS_B MSI , MTL_SERIAL_NUMBERS MSN
Where MSI.SEGMENT1 = '&item_name'
and MSN.SERIAL_NUMBER = '&serial_number'
and MSI.organization_ID = MSN.current_organization_ID
and MSI.INVENTORY_ITEM_ID = MSN.INVENTORY_ITEM_ID;
Reference Documents
-------------------

Similar Messages

  • Serial number for Ciscoworks LMS 4.0

    Hi All,
    We have  Ciscoworks LMS 4.0 running in HP server. Can please advise how to get serial number or any other number to uniquely identify it?
    Thanks in advance.
    Regards,
    Rakesh

    Hi Rakesh,
    The serial number (PIN/PAK) should be on the box in which LMS was shipped.  It is not recorded electronically within LMS.
    or
    look inside the license file  .lic 
    -the PAK is the serial
    check the below link too:
    https://supportforums.cisco.com/message/3510700#3510700
    Thanks-
    Afroz
    [Do rate the useful post]
    ****Ratings Encourages Contributors ****

  • Serial/ Warranty question

    From the info I've gathered I'm led to believe that the 3rd, 4th and 5th digits of your serial determines the manufacture date..
    So mine is 5K928xxxxxx which should mean it was made in the 28th week of 2009
    Can someone verify if this is accurate and if it is, why does apple serial checker say it's out of warranty when it was made LESS than 12 months ago?

    Graham Outterside wrote:
    BeufordRULES wrote:
    Can someone verify if this is accurate and if it is, why does apple serial checker say it's out of warranty when it was made LESS than 12 months ago?
    Because your assumption stated above about the date of manufacturing is incorrect ?
    I got my info from here:
    http://forums.macrumors.com/showthread.php?t=549376
    Not saying it's right but makes sense

  • 2 Different Serial Numbers?

    Ok, on my iPod nano the serial number on the back of the ipod is different from the number on the about page on the ipod. The one on the back does not check in at all on Apples serial check, but the one on the about page says to register your product?? Any help?

    Where did you buy this iPod? If you got it anywhere other than an official Apple seller, it may be a fake. There are counterfeit iPods circulating.
    Just to make sure you're reading it correctly.
    http://docs.info.apple.com/article.html?artnum=60978

  • Ipod Touch 5th Generation will not turn on, restore, or show up in itunes unless in DFU mode.

    So a friend gave me his Ipod Touch 5th gen because he couldn't fix it himself and he bought a new one, and while I'm stoked to have a near brand-new Ipod touch, it's also frustrating me to the point I'm ready to give up on it aswell and pass it down the line. I'm not sure what he did to it, he says it just stopped working but you never know.
    Anyways, the problem is that it simply does not turn on regardless of what I do to it. When I plug it into the computer, it gets warm; usually a sign it's charging fine. However, it doesn't show up on Itunes. I read some forum posts and searched around other places aswell, and tried putting it into DFU/Recovery(not sure which is which anymore, it's the one where you hold down the power button for 3 seconds, then home+power for 10, then home button for 20). It showed up on Itunes, and said it needed to restore. I downloaded the 1.2gb update it needed, but then it hung at the "Waiting for Ipod" progress bar. As it does this, I get maybe 3-5 Windows 'bing' sounds of a connecting/disconnecting device, ending on a disconnect sound. Itunes eventually times out the restore with an error code 4005, which I read means the Ipod has been disconnected in the middle.
    After this, it doesn't show up on Itunes and I have to repeat the process to get it to show up again. I tried it a third time just now and it's still doing the same thing.
    Any ideas? Really at the end of the line on ideas I think.
    Please and thanks,
    -Cody
    P.S. I don't know if it matters but the warmth is coming from the top/camera end fo the Ipod. Not sure where the battery is versus the CPU, but maybe that'll help the diagnosis.
    P.S.S. Also, when it shows up in Itunes in recovery mode, it doesn't show a serial number, so I don't think an Apple store would even work on it without a serial #.

    Check USB connections
    Related errors: 13, 14, 1600-1629, 1643-1650, 2000-2009, 4000, 4005, 4013, 4014, 4016, “invalid response,” and being prompted to restore again after a restore completes.
    If there’s an issue with the USB port, cable, dock, or hub, or if the device becomes disconnected during restore, try troubleshooting the USB connection, then troubleshooting your security software.
    To narrow down the issue, you can also change up your hardware:
    Use another USB cable.
    Plug your cable into a different USB port on your computer.
    Try a different dock connector (or no dock).
    Add (or remove) a USB hub between your device and computer.
    Connect your computer directly to your Internet source, with no routers, hubs, or switches.
    If you checked your connections and are still seeing the error message, check for hardware issues.
    Check for hardware issues
    Related errors: 1, 3, 10-47, 1002, 1011, 1012, 1014, 1000-1020, 1669.
    Try to restore your iOS device two more times while connected with a cable, computer, and network you know are good. Also, confirm your security software and settings are allowing communication between your device and update servers. If you still see the error message when you update or restore, contact Apple support.
    Try on another computer.
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar                                     
    The SN may not show up because of a hardware problem and does not mean Apple will not help

  • I can't seem to Print out the Object I made in this Map. Any ideas?

    Well here's my problem I'm trying to print out the Key's and Value's associated in the following MutliMap.
    The code formating seems to screw up < and >. My datastructure is a Multi Map, the Key is a String Object and
    the Value associated with that String Key is an ArrayList of an object of type Message I defined below.
    Map<String,List<Message>> = new HashMap<String,List<Message>>();
    Here's my code for where I try to Print everything (in the function print() ) .
    The Print just either prints out the KEY and no value, if I take out my ((Message)value) cast, it will print the Message class, like
    43343@Message because I'm assuming its wondering how to Print something that is an object I defined.
    Thats why I defined my own print function and I also override the toString() function but both don't work it seems.
    package parser;
    import java.util.ArrayList;
    import java.util.HashMap;
    import java.util.Iterator;
    import java.util.List;
    import java.util.Map;
    import java.util.Set;
    import java.io.*;
    //this class should store all the Messages or "Events" and
    //you can access them based on their Serial key.
    public class MessageDB
         //database to hold the information
         //     holds the Alerts/messages
         Map<String, List<Message>> AlertMap;
         //Constructor
         MessageDB()
              AlertMap = new HashMap<String, List<Message>>();
         //print, outputs the contents of the hashMap
         public void print()
            //want to print out the Key and all the Messages
              //associated with that key
              Set keys = AlertMap.keySet();          // The set of keys in the map.
              Iterator keyIter = keys.iterator();
              System.out.println("The map contains the following associations:");
              while (keyIter.hasNext()) {
                    Object key = keyIter.next();  // Get the next key.
                    Object value = AlertMap.get(key);  // Get the value for that key.
                    System.out.println( "Serial (key): " + key + "\n");
                    System.out.println("value: " + ((Message)value).toString() + "\n");
                    //((Message)value).print();
         //overloaded print to print to user screen.
         public  void print(PrintWriter out)
              //want to print out the Key and all the Messages
              //associated with that key
              Set keys = AlertMap.keySet();          // The set of keys in the map.
              Iterator keyIter = keys.iterator();
              out.println("The map contains the following associations:");
              out.flush();
              while (keyIter.hasNext()) {
                    Object key = keyIter.next();  // Get the next key.
                    Object value = AlertMap.get(key);  // Get the value for that key.
                   //out.flush();
                   /* out.println( "   (" + key + "," + value + ")" );
                   out.flush();*/
                   // out.println("------------------\n");
                   out.println("EntityID: " + key + "\n"
                                 + "Message: " + value + "\n");
                   //out.println("------------------\n");
                   out.flush();
         void add(Message msg)
              //getting the position of the List by EntityID if avaiable
              List<Message> AlertList = AlertMap.get(msg.Serial);
              //checking to see if there is a unique Key already in the Map.
              if (AlertList == null)
                   //if there isnt a key in the map, add a new key, and a new List mapping
                   //to the key EntityID;
                     AlertList = new ArrayList<Message>();
                     AlertMap.put(msg.Serial, AlertList);
                     AlertList.add(msg);
              else
              //adding message to List
                   AlertList.add(msg);
    }Here's my message class:
    package parser;
    //this class will hold the Event/Message
    import java.util.List;
    import java.util.HashMap;
    import java.util.Map;
    import java.util.ArrayList;
    import java.util.Set;
    import java.util.Iterator;
    public class Message {
         String Identifer;
         String Serial;
         String Node;
         String NodeAlias;
         String Manager;
         String Agent;
         String AlertGroup;
         String AlertKey;
         String Severity;
         String Summary;
         String StateChange;
         String FirstOccurance;
         String LastOccurance;
         String InternalLast;
         String EventId;
         String LocalNodeAlias;
         Message()
               Identifer = "";
               Serial = "";
               Node = "";
               NodeAlias = "";
               Manager = "";
               Agent = "";
               AlertGroup = "";
               AlertKey = "";
               Severity = "";
               Summary = "";
               StateChange = "";
               FirstOccurance = "";
               LastOccurance = "";
               InternalLast = "";
               EventId = "";
               LocalNodeAlias = "";
         void print()
              System.out.println("Identifer: " + this.Identifer + '\n'
                        + "Serial: " + this.Serial + '\n'
                        + "Node: " + this.Node + '\n'
                        + "NodeAlias: " + this.NodeAlias + '\n'
                        + "Manager: "  + this.Manager + '\n'
                        + "Agent: " + this.Agent + '\n'
                        + "AlertGroup: " + this.AlertGroup + '\n'
                        + "AlertKey: " + this.AlertKey + '\n'
                        + "Severity: " + this.Severity + '\n'
                        + "Summary: " + this.Summary + '\n'
                        + "StateChange: " + this.StateChange + '\n'
                        + "FirstOccurance: " + this.FirstOccurance + '\n'
                        + "LastOccurance: " +      this.LastOccurance + '\n'
                        + "InternalLast: " + this.InternalLast + '\n'
                        + "EventId: " + this.EventId + '\n'
                        + "LocalNodeAlias: " + this.LocalNodeAlias + '\n');
         public String toString()
              return ("Identifer: " + this.Identifer + '\n'
                        + "Serial: " + this.Serial + '\n'
                        + "Node: " + this.Node + '\n'
                        + "NodeAlias: " + this.NodeAlias + '\n'
                        + "Manager: "  + this.Manager + '\n'
                        + "Agent: " + this.Agent + '\n'
                        + "AlertGroup: " + this.AlertGroup + '\n'
                        + "AlertKey: " + this.AlertKey + '\n'
                        + "Severity: " + this.Severity + '\n'
                        + "Summary: " + this.Summary + '\n'
                        + "StateChange: " + this.StateChange + '\n'
                        + "FirstOccurance: " + this.FirstOccurance + '\n'
                        + "LastOccurance: " +      this.LastOccurance + '\n'
                        + "InternalLast: " + this.InternalLast + '\n'
                        + "EventId: " + this.EventId + '\n'
                        + "LocalNodeAlias: " + this.LocalNodeAlias + '\n');
    }I'm correctly populating my Messages sent to me from the client, I tested it and it works but iterating over them once the messages are inserted into the map is my issue.
    I'm not getting an error, just no output for the values
    here's how I'm adding the Messages to the MessageDB
    //This string is coming from a client
    String str = in.readLine();
    // creating a scanner to parse
    Scanner scanner = new Scanner(str);
    Scanner scannerPop = new Scanner(str);
    //Creating a new message to hold information
    Message msg = new Message();
    //place Scanner object here:
    MessageParser.printTokens(scanner);
    MessageParser.populateMessage(scannerPop, msg);
    System.out.println("-------PRINTING MESSAGE------\n");
    msg.print();
    System.out.println("----------END PRINT----------\n");
    System.out.println("-------Accessing data from Map----\n");
    MessageDB testDB = new MessageDB();
    testDB.add(msg);
    testDB.print();I know this code is ugly, I should make accessor and modifer functions for my Message class but for now I'm just trying to see if I this method is even going to work then I'm going to go about making it more protected.
    Also here is my output:
    that long mess is the incoming string from the client, and im parsing it up into tokens and assigning my message object certain values.
    Address of server: 0.0.0.0/0.0.0.0
    Server is bound to port: 2222
    Echo :UPDATE: "GATEWAY:@barneyfifedisconnectedMon Jun 11 16:46:12
    2007",446,"barneyfife","","ConnectionWatch","","Gateway","GATEWAY:",0,"A
    GATEWAY process  running on barneyfife has disconnected as username
    gateway",06/11/07 16:50:12,06/11/07 16:46:12,06/11/07 16:46:12,06/11/07 16:46:12,0,1,1,0,0,"",65534,0,0,0,"",0,0,0,"","",0,0,"",0,"",0,0,"","","","","","","","",0,
    0,"","","NCOMS",446,""
    Token [0]UPDATE: "GATEWAY:@barneyfifedisconnectedMon Jun 11 16:46:12 2007"
    Token [1]446
    Token [2]"barneyfife"
    Token [3]""
    Token [4]"ConnectionWatch"
    Token [5]""
    Token [6]"Gateway"
    Token [7]"GATEWAY:"
    Token [8]0
    Token [9]"A GATEWAY process  running on barneyfife has disconnected as username gateway"
    Token [10]06/11/07 16:50:12
    Token [11]06/11/07 16:46:12
    Token [12]06/11/07 16:46:12
    Token [13]06/11/07 16:46:12
    Token [14]0
    Token [15]1
    Token [16]1
    Token [17]0
    Token [18]0
    Token [19]""
    Token [20]65534
    Token [21]0
    Token [22]0
    Token [23]0
    Token [24]""
    Token [25]0
    Token [26]0
    Token [27]0
    Token [28]""
    Token [29]""
    Token [30]0
    Token [31]0
    Token [32]""
    Token [33]0
    Token [34]""
    Token [35]0
    Token [36]0
    Token [37]""
    Token [38]""
    Token [39]""
    Token [40]""
    Token [41]""
    Token [42]""
    Token [43]""
    Token [44]""
    Token [45]0
    Token [46]0
    Token [47]""
    Token [48]""
    Token [49]"NCOMS"
    Token [50]446
    Token [51]""
    Entering populate mssage inside case 0
    case 0: UPDATE: "GATEWAY:@barneyfifedisconnectedMon Jun 11 16:46:12 2007"
    case 1: 446
    case 2: "barneyfife"
    case 3: ""
    case 4: "ConnectionWatch"
    case 5: ""
    case 6: "Gateway"
    case 7: "GATEWAY:"
    case 8: 0
    case 9: "A GATEWAY process  running on barneyfife has disconnected as username gateway"
    case 10: 06/11/07 16:50:12
    case 11: 06/11/07 16:46:12
    case 12: 06/11/07 16:46:12
    case 13: 06/11/07 16:46:12
    DEFAULT: 0
    DEFAULT: 1
    DEFAULT: 1
    DEFAULT: 0
    DEFAULT: 0
    DEFAULT: ""
    DEFAULT: 65534
    DEFAULT: 0
    DEFAULT: 0
    DEFAULT: 0
    case 24: ""
    DEFAULT: 0
    DEFAULT: 0
    DEFAULT: 0
    DEFAULT: ""
    DEFAULT: ""
    DEFAULT: 0
    DEFAULT: 0
    DEFAULT: ""
    DEFAULT: 0
    DEFAULT: ""
    DEFAULT: 0
    DEFAULT: 0
    case 37: ""
    DEFAULT: ""
    DEFAULT: ""
    DEFAULT: ""
    DEFAULT: ""
    DEFAULT: ""
    DEFAULT: ""
    DEFAULT: ""
    DEFAULT: 0
    DEFAULT: 0
    DEFAULT: ""
    DEFAULT: ""
    DEFAULT: "NCOMS"
    DEFAULT: 446
    DEFAULT: ""
    -------PRINTING MESSAGE------
    Identifer: UPDATE: "GATEWAY:@barneyfifedisconnectedMon Jun 11 16:46:12 2007"
    Serial: 446
    Node: "barneyfife"
    NodeAlias: ""
    Manager: "ConnectionWatch"
    Agent: ""
    AlertGroup: "Gateway"
    AlertKey: "GATEWAY:"
    Severity: 0
    Summary: "A GATEWAY process  running on barneyfife has disconnected as username gateway"
    StateChange: 06/11/07 16:50:12
    FirstOccurance: 06/11/07 16:46:12
    LastOccurance: 06/11/07 16:46:12
    InternalLast: 06/11/07 16:46:12
    EventId: ""
    LocalNodeAlias: ""
    ----------END PRINT----------
    -------Accessing data from Map----
    The map contains the following associations:
    Serial (key): 446As you see it is printing the correct Serial, but it seems like it isn't even entering into the printing the value associated with that key.
    NOTE: if you need more code I can supply my parsing functions as well.
    Thanks!
    Message was edited by:
    lokie
    NOTE: the code formating screws up the < >
    it should be HashMap<String,List<Message>>();
    Message was edited by:
    lokie
    Message was edited by:
    lokie
    Message was edited by:
    lokie

    Thanks Good Idea :)
    Heres a small version of the same problem:
    MainTest
    package ds;
    public class MainTest {
         public static void main(String []args)
              //create a new message object, assign it some values.
              //note: Serial is the key to the map.
              Message m1 = new Message();
              m1.Identifer = "Test Message";
              m1.Serial = "222";
              m1.Agent = "AgentTest";
              m1.Identifer = "IdentiferTest";
              //test to see if it assigned right.
              m1.print();
              //insert into a map
              MessageDB dbTest = new MessageDB();
              dbTest.add(m1);
              //print key/values
              dbTest.print();
    }Here is the 2 classes that I use, Message and MessageDB.
    The problem is in the MesesageDB i'm getting the following error:
    Exception in thread "main" java.lang.ClassCastException: java.util.ArrayList cannot be cast to ds.Message
         at ds.MessageDB.print(MessageDB.java:43)
         at ds.MainTest.main(MainTest.java:28)
    package ds;
    import java.util.ArrayList;
    import java.util.HashMap;
    import java.util.Iterator;
    import java.util.List;
    import java.util.Map;
    import java.util.Set;
    import java.io.*;
    //this class should store all the Messages or "Events" and
    //you can access them based on their Serial key.
    public class MessageDB
         //database to hold the information
         //     holds the Alerts/messages
         Map<String, List<Message>> AlertMap;
         //Constructor
         MessageDB()
              AlertMap = new HashMap<String, List<Message>>();
         //print, outputs the contents of the hashMap
         public void print()
            //want to print out the Key and all the Messages
              //associated with that key
              Set keys = AlertMap.keySet();          // The set of keys in the map.
              Iterator keyIter = keys.iterator();
              System.out.println("The map contains the following associations:");
              while (keyIter.hasNext()) {
                    Object key = keyIter.next();  // Get the next key.
                    Object value = AlertMap.get(key);  // Get the value for that key.
                    System.out.println( "Serial (key): " + key + "\n");
                    System.out.println("value: " + ((Message)value) + "\n");
                    //((Message)value).print();
         ///adds a message (value) to the map, along with the key.
         void add(Message msg)
              //getting the position of the List by EntityID if avaiable
              List<Message> AlertList = AlertMap.get(msg.Serial);
              //checking to see if there is a unique Key already in the Map.
              if (AlertList == null)
                   //if there isnt a key in the map, add a new key, and a new List mapping
                   //to the key EntityID;
                     AlertList = new ArrayList<Message>();
                     AlertMap.put(msg.Serial, AlertList);
                     AlertList.add(msg);
              else
              //adding message to List
                   AlertList.add(msg);
    }Here is the message class you'll need to use to compile:
    package ds;
         public class Message {
              String Identifer;
              String Serial;
              String Node;
              String NodeAlias;
              String Manager;
              String Agent;
              Message()
                    Identifer = "";
                    Serial = "";
                    Node = "";
                    NodeAlias = "";
                    Manager = "";
                    Agent = "";
              void print()
                   System.out.println("Identifer: " + this.Identifer + '\n'
                             + "Serial: " + this.Serial + '\n'
                             + "Node: " + this.Node + '\n'
                             + "NodeAlias: " + this.NodeAlias + '\n'
                             + "Manager: "  + this.Manager + '\n'
                             + "Agent: " + this.Agent + '\n');
              public String toString()
                   return ("Identifer: " + this.Identifer + '\n'
                             + "Serial: " + this.Serial + '\n'
                             + "Node: " + this.Node + '\n'
                             + "NodeAlias: " + this.NodeAlias + '\n'
                             + "Manager: "  + this.Manager + '\n'
                             + "Agent: " + this.Agent + '\n');
         }It doesn't like this line as I suspected:
    System.out.println("value: " + ((Message)value) + "\n");

  • Data Laoded successfully, giving error while activating the ODS

    Hi,
    Process Chain is running daily for  loading and activating the data into the ODS.
    Today the data loaded successfully but the data is not getting activation. I then tried to activate the data manually but still it not trying to get activated.
    I check it the Status tab, it is also giving the same Procedure to activate the data manually.
    I checked in the Details Tab. It is displaying Errors as :
    1. Error getting SID for ODS.
    2. Task 0049 for parallel SID assignments terminated with errors.
    3. Activation of data records from ODS terminated.
    4. System error occured (RFC call)
    Please any one help in this issue.
    Thanks & Regards
    Jagannadha Raju

    Hi,
    This is probably because you loaded transaction data before master data and tried activating it.Load the relevant master data, perform the change run and retrigger activation.
    It should work.
    Else there is a workaround. You can try editing out/blanking out those values in PSA and loading and activating. This will work.
    Also try repairing the ODS object in RSRV.
    When you activate multiple requests tick the activate serially check box.
    thanks,
    JituK

  • Can not administer Catalyst 2960 switch via console

    Hello,
    I want to configure my switch via console cable, the switch boots up normally, and there are no configurations present on the switch.  However, anything I type does not appear on the terminal client.  I used several terminal clients (TeraTerm, PuTTY, HyperTerminal), all latest versions as well as different PCs.  I even forced the switch to rommon mode, still, anything I type does not appear on the terminal client.
    Here's the output of TeraTerm:
    Boot Sector Filesystem (bs) installed, fsid: 2
    Base ethernet MAC Address: e8:40:40:06:f0:80
    Xmodem file system is available.
    The password-recovery mechanism is enabled.
    Initializing Flash...
    flashfs[0]: 542 files, 19 directories
    flashfs[0]: 0 orphaned files, 0 orphaned directories
    flashfs[0]: Total bytes: 32514048
    flashfs[0]: Bytes used: 11565056
    flashfs[0]: Bytes available: 20948992
    flashfs[0]: flashfs fsck took 11 seconds.
    ...done Initializing Flash.
    done.
    Loading "flash:/c2960-lanbasek9-mz.122-50.SE5/c2960-lanbasek9-mz.122-50.SE5.bin"...@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@
    File "flash:/c2960-lanbasek9-mz.122-50.SE5/c2960-lanbasek9-mz.122-50.SE5.bin" uncompressed and installed, entry point: 0x3000
    executing...
                  Restricted Rights Legend
    Use, duplication, or disclosure by the Government is
    subject to restrictions as set forth in subparagraph
    (c) of the Commercial Computer Software - Restricted
    Rights clause at FAR sec. 52.227-19 and subparagraph
    (c) (1) (ii) of the Rights in Technical Data and Computer
    Software clause at DFARS sec. 252.227-7013.
               cisco Systems, Inc.
               170 West Tasman Drive
               San Jose, California 95134-1706
    Cisco IOS Software, C2960 Software (C2960-LANBASEK9-M), Version 12.2(50)SE5, RELEASE SOFTWARE (fc1)
    Technical Support: http://www.cisco.com/techsupport
    Copyright (c) 1986-2010 by Cisco Systems, Inc.
    Compiled Tue 28-Sep-10 13:44 by prod_rel_team
    Image text-base: 0x00003000, data-base: 0x01400000
    Initializing flashfs...
    fsck: Disable shadow buffering due to heap fragmentation.
    flashfs[1]: 542 files, 19 directories
    flashfs[1]: 0 orphaned files, 0 orphaned directories
    flashfs[1]: Total bytes: 32514048
    flashfs[1]: Bytes used: 11565056
    flashfs[1]: Bytes available: 20948992
    flashfs[1]: flashfs fsck took 2 seconds.
    flashfs[1]: Initialization complete....done Initializing flashfs.
    Checking for Bootloader upgrade.. not needed
    POST: CPU MIC register Tests : Begin
    POST: CPU MIC register Tests : End, Status Passed
    POST: PortASIC Memory Tests : Begin
    POST: PortASIC Memory Tests : End, Status Passed
    POST: CPU MIC interface Loopback Tests : Begin
    POST: CPU MIC interface Loopback Tests : End, Status Passed
    POST: PortASIC RingLoopback Tests : Begin
    POST: PortASIC RingLoopback Tests : End, Status Passed
    POST: PortASIC CAM Subsystem Tests : Begin
    POST: PortASIC CAM Subsystem Tests : End, Status Passed
    POST: PortASIC Port Loopback Tests : Begin
    POST: PortASIC Port Loopback Tests : End, Status Passed
    Waiting for Port download...Complete
    This product contains cryptographic features and is subject to United
    States and local country laws governing import, export, transfer and
    use. Delivery of Cisco cryptographic products does not imply
    third-party authority to import, export, distribute or use encryption.
    Importers, exporters, distributors and users are responsible for
    compliance with U.S. and local country laws. By using this product you
    agree to comply with applicable laws and regulations. If you are unable
    to comply with U.S. and local laws, return this product immediately.
    A summary of U.S. laws governing Cisco cryptographic products may be found at:
    http://www.cisco.com/wwl/export/crypto/tool/stqrg.html
    If you require further assistance please contact us by sending email to
    [email protected].
    cisco WS-C2960-24TT-L (PowerPC405) processor (revision J0) with 65536K bytes of memory.
    Processor board ID FOC1510X4ZQ
    Last reset from power-on
    1 Virtual Ethernet interface
    24 FastEthernet interfaces
    2 Gigabit Ethernet interfaces
    The password-recovery mechanism is enabled.
    64K bytes of flash-simulated non-volatile configuration memory.
    Base ethernet MAC Address       : E8:40:40:06:F0:80
    Motherboard assembly number     : 73-12600-05
    Power supply part number        : 341-0097-03
    Motherboard serial number       : FOC15094MZG
    Power supply serial number      : DCA150583WQ
    Model revision number           : J0
    Motherboard revision number     : A0
    Model number                    : WS-C2960-24TT-L
    System serial number            : FOC1510X4ZQ
    Top Assembly Part Number        : 800-32797-01
    Top Assembly Revision Number    : F0
    Version ID                      : V09
    CLEI Code Number                : COM3L00BRE
    Hardware Board Revision Number  : 0x0A
    Switch Ports Model              SW Version            SW Image
    *    1 26    WS-C2960-24TT-L    12.2(50)SE5           C2960-LANBASEK9-M
    Press RETURN to get started!
    *Mar  1 00:00:31.381: %LINEPROTO-5-UPDOWN: Line protocol on Interface Vlan1, changed state to down
    *Mar  1 00:00:32.556: %SPANTREE-5-EXTENDED_SYSID: Extended SysId enabled for type vlan
    *Mar  1 00:00:35.802: %LINEPROTO-5-UPDOWN: Line protocol on Interface Vlan99, changed state to down
    *Mar  1 00:00:35.861: %SYS-5-CONFIG_I: Configured from memory by console
    *Mar  1 00:00:36.012: %SYS-5-RESTART: System restarted --
    Cisco IOS Software, C2960 Software (C2960-LANBASEK9-M), Version 12.2(50)SE5, RELEASE SOFTWARE (fc1)
    Technical Support: http://www.cisco.com/techsupport
    Copyright (c) 1986-2010 by Cisco Systems, Inc.
    Compiled Tue 28-Sep-10 13:44 by prod_rel_team
    *Mar  1 00:00:36.037: %SSH-5-ENABLED: SSH 1.99 has been enabled
    *Mar  1 00:00:37.060: %LINK-5-CHANGED: Interface FastEthernet0/6, changed state to administratively down
    *Mar  1 00:00:37.094: %LINK-5-CHANGED: Interface FastEthernet0/7, changed state to administratively down
    *Mar  1 00:00:37.127: %LINK-5-CHANGED: Interface FastEthernet0/8, changed state to administratively down
    *Mar  1 00:00:37.161: %LINK-5-CHANGED: Interface FastEthernet0/9, changed state to administratively down
    *Mar  1 00:00:37.195: %LINK-5-CHANGED: Interface FastEthernet0/10, changed state to administratively down
    *Mar  1 00:00:37.228: %LINK-5-CHANGED: Interface FastEthernet0/11, changed state to administratively down
    *Mar  1 00:00:37.262: %LINK-5-CHANGED: Interface FastEthernet0/12, changed state to administratively down
    *Mar  1 00:00:37.362: %LINK-5-CHANGED: Interface FastEthernet0/13, changed state to administratively down
    *Mar  1 00:00:37.362: %LINK-5-CHANGED: Interface FastEthernet0/14, changed state to administratively down
    *Mar  1 00:00:37.362: %LINK-5-CHANGED: Interface FastEthernet0/15, changed state to administratively down
    *Mar  1 00:00:37.404: %LINK-5-CHANGED: Interface FastEthernet0/16, changed state to administratively down
    *Mar  1 00:00:37.446: %LINK-5-CHANGED: Interface FastEthernet0/17, changed state to administratively down
    *Mar  1 00:00:37.488: %LINK-5-CHANGED: Interface FastEthernet0/18, changed state to administratively down
    *Mar  1 00:00:37.497: %LINK-5-CHANGED: Interface FastEthernet0/19, changed state to administratively down
    *Mar  1 00:00:37.539: %LINK-5-CHANGED: Interface FastEthernet0/20, changed state to administratively down
    *Mar  1 00:00:37.572: %LINK-5-CHANGED: Interface FastEthernet0/21, changed state to administratively down
    *Mar  1 00:00:37.606: %LINK-5-CHANGED: Interface FastEthernet0/22, changed state to administratively down
    *Mar  1 00:00:37.639: %LINK-5-CHANGED: Interface FastEthernet0/23, changed state to administratively down
    *Mar  1 00:00:37.673: %LINK-5-CHANGED: Interface FastEthernet0/24, changed state to administratively down
    *Mar  1 00:00:37.690: %LINK-5-CHANGED: Interface GigabitEthernet0/1, changed state to administratively down
    *Mar  1 00:00:37.715: %LINK-5-CHANGED: Interface GigabitEthernet0/2, changed state to administratively down
    After the last line, I can not type any command at all.  I encountered this on three 2960 switches that we have here in our laboratory.  Can anybody help me on how I can get access to the switch via console?
    Thanks in advance.

    Have You Check your console Cable.
    also
    If u are using USB to Serial check driver are properly installed.
    else
    See Helpful Cisco Documentation
    http://www.cisco.com/en/US/products/hw/switches/ps700/products_tech_note09186a008010ff7a.shtml
    Do Rate Helpful Posts

  • Driver needed for Adam Equipment balance

    Hi all,
    I was wondering if anyone has or can develope driver for Adam Equipment balance model AFP-L&LC SERIES.
    The software we are using is: Labview software version 8.2
    Please contact me at: [email protected]

    I attached a screen shot of a vi I made real quick.
    Basically you are going to configure your serial port using the Configure Port vi in Instrument I/O> Serial, check to see if there are any bytes at the port, if there are, read the bytes, and then parse the sting using the MAtch pattern and string to number conversion.
    You will have to decide how you want to save the data and what to do with the data. 
    Good Luck
    Message Edited by Kenny K on 05-14-2007 08:49 AM
    Kenny
    Attachments:
    adams driver.jpg ‏46 KB

  • Why new firmware may be a good fix for screen problems

    When I read on the Internet Thursday that some people had reported that the firmware had fixed their dark screen problems, I wondered if this was possible, and was this a good fix. I had taken my Touch to the Apple store earlier, and had the screen problem confirmed, but no exchange was possible at the moment, because the Touch was out of stock.
    Where I work we have a number of small LCD screens that have a narrow viewing angle like the Touch, but being commercial monitors, also have knobs to control brightness and most importantly contrast. I started playing with the contrast and was surprised that I was able to exactly duplicate the problem my Touch had, just with contrast. The contrast adjustment on this narrow view LCD controlled viewing angle, and I could duplicate the negative image thing perfectly. I now had great hope that the firmware would in fact fix my Touch.
    When I got home from work, I installed the firmware update to my week 36 Touch, and was thrilled to see all video issues gone. We need to remember that Apple has a lot more control over the LCD display through software than we have. We only have brightness! I mean if you had to adjust the contrast knob on your new computer monitor would you label the monitor as defective?
    I believe that Apple knew by serial number which Touches needed adjustment to the video based on LCD origin, and applied them with this software. They merely tuned the contrast knob, and some other video settings that we don't have! (It would be nice if they added a contrast slider, and maybe color saturation level, to the brightness level already included!)
    I have no intention of returning my Touch now for exchange, will count myself as lucky that my video got tweaked to perfection, and I have no dead pixels in my week 36 Touch. I understand that some people are never going to be happy with all of this, that in a perfect world everything would be great right out of the gate, all the time. But...
    Enjoying my Touch a lot. A great gadget.
    Now if we could only have those 3rd party applications!

    This is true. With any LCD screen you can adjust contrast and color temperature which seem to be the combination working against week 36 and 37 owners. It makes sense Apple could control these settings through a software update. I suspect as you have stated, the 1.1.1 firmware upgrade does a serial check and selectively alters certain settings to compensate for the difference in the screens.
    I say this because I still strongly suspect that Apple did change screens, screen coating or something in the hardware betweent he 37 and 38 lines (or early on in the 38 line) because there are reports with screen shots to confirm inconsistency int he effect of the 1.1.1 firmware update fixing the problem.
    If the firmware update works for you, fantastic! If it does not then I would return it. If I recieved a week 36 and week 37 device from an on-line order I would return unopened to the nearest Apple store to avoid a restocking fee. If I didn't have an Apple store I would do the return through whoever I did the on-line order with.
    The reason I would do this is that I am a bit of a perfectionist when it comes to displays. I feel like if I'm paying $300-$400 for one of these devices my desire to have the best screen would take priority over my need to own the device quickly, but that's just me.
    Jeremy
    Is your iPod Touch screen bad? Compare it against these screen shots:
    http://jdeats762.bravehost.com/iBadScreen.htm
    Message was edited by: Ramzy76

  • Creative SoundBlaster Live! 5.1 Digital driver update - wont wo

    Hello I've had this problem for as long as I can remember. I have already searched the forum in hope that I would find a solution. I didn't.
    Ok, this is how it is. About two years ago I bought computer parts which I assembled together and "Creative SoundBlaster Li've! 5. Digital RETAIL PCI" was one of them.
    I have tried every single driver you have under your support page and none of them will work! I always get the message:
    "Setup could not detect any Sound Blaster Audio card on your system.
    Please ensure that your Sound Blaster hardware is properly installed before running this Setup program.
    Setup will now exit."
    Right. All drivers gives me this. I know that you guys will probably ask after the serial number now but I'm too lazy to check at the very moment and I know that the serial check will be a SB Li've! 5. digital card anyway so I don't see how that would solve this issue you are having with your, sorry to say this, outdated installs.
    The card is installed correctly in the device manager as "Creative SB Li've! series". And how come I can install it from the CD but not from your internet drivers?
    I'm using Windows 2000 Professional with service pack 4 by the way.
    Is there a chance these installs wont work with latest service packs, that they were designed for earlier service packs and Microsoft maybe changed the way to detect hardware in later service packs?
    I'd appreciate any help I can get because I really need to update my drivers, I got a small sound problem now it seems (soundeffects volume goes down and there is a bit of distortion when it's too many of the same sound playing - or when a soundeffect is to loud).
    Thanks for a great card in general, I'm going to buy (I don't remember the name now) one of those new cards later on - that is suposed to be over 4 times better than the previous soundblaster cards? .

    Hmm, the install extracts files but not in the current directory or in windows temp. How would I extract the content from the install file so I can patch it's
    EDIT: I extracted it with winrar and I got the following files:
    data.cab
    data.hdr
    data2.cab
    Diagnose.cab
    disk.id
    Driver.cab
    ikernel.ex_
    layout.bin
    PC3.cab
    Setup.exe
    Setup.ini
    setup.inx
    Wstudio.cab
    I know there should have been some sort of audio folder here but I didn't find any, so I tried the program and it said patch applied and all that. I try to run setup.exe and it will still not work. Probably because I'm doing it all wrong :P.Message Edited by Ice_ on 06-5-2006 04: AM
    EDIT2: Ok I got several driver files so I just extracted "Li'veDrvUni-Pack(ENG).exe" to C:\sb\ and ran the tool as you described. I could launch the install without problems. By the way, Li'veDrvUni-Pack(ENG).exe is containing the latest drivers as well right? So I dont need to do this with "Li'veDrvPack_Patch.exe" as well?
    Thanks!Message Edited by Ice_ on 06-5-2006 04:5 AM

  • Trying to keep track of how many objects I create

    Hello everyone I'm trying to keep track of how many message objects I created and Assign them to a data member.
    Right now it assigns all the Message objects the same number at the end which is 3. I wanted it to assign 1 to the first object it create, 2 for the 2nd, and 3 for the 3rd.
    here's a small version of my code:
    package ss;
    import java.util.ArrayList;
    import java.util.Iterator;
    public class MainTest {
         public static void main(String [] args)
              Message msg = null;
              ArrayList<Message> msgList = new ArrayList<Message>();
              for(int i = 0; i < 3; i++)
                   msg = new Message();
                   msgList.add(msg);
              System.out.println(msgList);
    package ss;
    //this class will hold the Event/Message
    import java.util.List;
    import java.util.HashMap;
    import java.util.Map;
    import java.util.ArrayList;
    import java.util.Set;
    import java.util.Iterator;
    public class Message {
         //these are datamembers that will be used during
         //the sending of the message to the reciever
         //PacketID should be incremented each time a new message is created
         static int PacketID = 0;
         Message()
              PacketID +=1;
         public String toString() {
              return("PacketID: " + this.PacketID
                        + "\n");
    }output:
    [PacketID: 3
    , PacketID: 3
    , PacketID: 3
    Any ideas what I'm doing wrong?
    Thanks!

    Thanks BigDaddyLovehandles,
    Well there's the problem, I just posted a simpler problem to a bigger one. So I am keeping them in a collection as you can see below.
    I'm keeping these message stored in a multi map, and it is multi-threaded. Everytime a user connects to my server I create a new thread, and start adding the "messages" to the database.
    But I must have a packetID, meaning every new message created I need to assign that number to the message object.
    I also see a problem with this like you said, its not thread safe, if 2 clients connect to the server, and both send me events, there are going to be 2 different maps, copying events from the client and storing them in their own seperate databases.
    This might not be a problem because after I get the events on each thread, i send them to another server for processing.
    Here's an example of what my database looks like that stores the messages:
    //this class should store all the Messages or "Events" and
    //you can access them based on their Serial key.
    public class MessageDB {
         //database to hold the information
         //     holds the Alerts/messages
         Map<String, List<Message>> AlertMap;
         //Constructor
         MessageDB() {
              AlertMap = new HashMap<String, List<Message>>();
         //print, outputs the contents of the hashMap
         public void print() {
              //want to print out the Key and all the Messages
              //associated with that key
              //print, outputs the contents of the hashMap
                   for (String key : AlertMap.keySet())
                        System.out.println("\n\nSerial (key): " + key
                                  + "\nValues in Map: \n" + AlertMap.get(key));
         void add(Message msg) {
              //getting the position of the List by EntityID if avaiable
              List<Message> AlertList = AlertMap.get(msg.Serial);
              //checking to see if there is a unique Key already in the Map.
              if (AlertList == null) {
                   //if there isnt a key in the map, add a new key, and a new List mapping
                   //to the key EntityID;
                   AlertList = new ArrayList<Message>();
                   AlertMap.put(msg.Serial, AlertList);
                   AlertList.add(msg);
              } else {
                   //adding message to List
                   AlertList.add(msg);
         }Any suggestions on what I can to number all these messages and it will be thread safe?

  • Timeout when I trying to compile Package

    Hi
    When I tried to compile package show me error:
    timeout ocurred while waiting to lock Schema.Mypackage

    1. Verify whether the package is locked by another user:
    SELECT * FROM v$access WHERE object = '<package>';
    If there a row is returned, the package is still locked.
    2. Use the SID which is returned and check in v$session which session is
    locking this package.
    SELECT SID, SERIAL#, OSUSER, USERNAME FROM V$SESSION WHERE sid = '<SID>
    3. If the session still is shown, use:
    ALTER SYSTEM KILL SESSION '<sid>, <serial#>';
    check the above work out.

  • Is there a way to be able to activate our Adobe product while behind a proxy ?

    This issue concern not only Captivate 6 but all our Adobe product Familly, wa are having hard time answering calls to our users asking to activate their software but being unable to do so.
    The program won't acces the internet while behind a proxy (we are using a proxy pac), it is unacceptable to not be able to activate a software when behind a proxy.
    Please advise.
    Cyril Pineiro @ Natixis

    Hello,
    Well we already found that answer somewhere on a forum, I guess you mean add the URL to firewall exception,
    but this doesn't fit Company Security Standard, in my company we cannot allow a computer access internet
    directly exception or not, it is very sad that a company such as Adobe is not able to produce a tool that is
    Proxy Aware for all it's functions (Software activation, Software Serial Checking etc. all doesn't behave the same way).
    We need a solution ASAP as many of our users are not able to use their Adobe Softwares.
    Cyril Pineiro @ Natixis

  • Is there a way to be able to still control volume while using a multi-output device?

    I just need to know if I can still control volume while using a multi-output device (or an aggregate device, whichever one blocks the volume changing) because I am trying to record my screen using Quicktime while recording sound on my screen (using soundflower). Any suggestions? I am happy to download an external program to fix it.

    Hello,
    Well we already found that answer somewhere on a forum, I guess you mean add the URL to firewall exception,
    but this doesn't fit Company Security Standard, in my company we cannot allow a computer access internet
    directly exception or not, it is very sad that a company such as Adobe is not able to produce a tool that is
    Proxy Aware for all it's functions (Software activation, Software Serial Checking etc. all doesn't behave the same way).
    We need a solution ASAP as many of our users are not able to use their Adobe Softwares.
    Cyril Pineiro @ Natixis

Maybe you are looking for