Hola not working Since 10.10.2 Upgrade?

Hello,
Hola App in Firefox not working since 10.10.2?
Anyone else?
Work arounds?
How to downgrade back to 10.10?
Any help greatly app reciated
Thanks
J.

The only way to 10.10.1 or earlier is if you have a TM backup from that point in time.

Similar Messages

Internet Sharing not working since 10.6.6 upgrade

Hi all. Hopefully someone can help me as I've been racking my brains on this one.
I originally had Internet Sharing setup from ethernet cable to airport and working perfectly. I could then access the internet wirelessly using my iphone and mac book.
Since upgrading to 10.6.6 (at least I think so) it has stopped working.
Internet is working perfectly on mac mini and other devices can access the internet through working wireless modem downstairs. I need to turn on Internet sharing through the mac mini so that we have internet on the 3rd floor of our townhouse.
I've tried switching off Internet Sharing, then restarting the computer, turning it on again and switching on internet sharing with a different network name, password, channel etc. Nothing seems to get it working again.
I've emptied the trash (200,000 files which is a bit of a worry) and repaired permissions.
Any suggestions would be a great help.
Cheers

No solution here; I'm having the same problem.
In a hotel with wired Ethernet to my MacBook Pro. Once I enable Internet Sharing, the Pro's Internet connectivity goes down. Looks like I get two "default" routes. I can connect my iPhone4 fine to the WiFi created, with WEP enabled; that's not my problem.
Destination        Gateway            Flags        Refs      Use   Netif Expire
default            172.29.7.254       UGSc          119        2     en0
default            link#5             UCSI            0        0     en1

Phone not working since 5.1.1 Upgrade

I received my Iphone as a gift 2 months ago. It was bought in China from an official Apple store. I then went to my local service provider and received a micro-sim on a pay-as-you-go deal. Phone worked perfectly for 2 and half months. I did the 5.1.1 update two nights ago and now the phone is saying:
"Only compatible sim cards from a supported carrier may be used to activate iPhone. Please insert the sim card that came with your iPhone or visit a supported carrier store to receive a replacement sim card."
I visited both VODACOM (in South Africa) and IStore (3rd party retailer of APPLE as there is NO Apple store in Africa). I put in the original AT&T sim, the phone switched on and recognises me but obviously there is no service because AT&T is not in South Africa. I then put in my Vodacom sim and it rejects it. I used the phone perfectly for 2+months and since the update this problem occured.
Help.

HI. If you read the question properly ... You will read that the phone was purchased from an official Apple store in China! I live in South Africa and no where on the African continent is there an official Apple store. So the phone is NOT a reject or hacked phone.
BUt it could have possibly reverted to an AT&T lock even though I never had to unlock it!!! It worked perfectly until I did the 5.1.1 update

HP Apps Not Working Since Win 8.1 Upgrade

Just trying to run my Officejet 8600 via WiFi using the HP Scan and Capture, and HP AiO Printer Remote apps.
I was able to use them successfully before the upgrade to Windows 8.1, but now the apps just launch, and then indefinitely do nothing. The icons appear in my dock, but when clicked just trigger the animation of a window opening that then immediately disappears.
I did a series of maneuvres in command prompt to enable SOME apps to work after the OS upgrade, but apparently that hasn't fixed either of my two HP applications.
I see lots of people just saying "Help, oh no, my printer won't work" while providing little to no explanation of their problem. Hopefully this is enough to get somewhere? Any advice is welcome.
I'm running a desktop PC that I put together in 2012: Asus motherboard, >3ghz AMD cpu, 16gig ram, Nvidia graphics, solid state HD, so I doubt I have a hardware problem.
Of course, I could just use a USB drive for scanning, but it really frustrates me that the features for which I specifically picked this printer suddenly won't work. And I don't even know if one can print from USB, but that's more trouble than I'm willing to go through on a regular basis. I assume I'd at least have to PDF everything first... no thanks.
Please help! Happy to troubleshoot or provide more information as necessary.

Hi misterjones
Have you tried uninstalling the store apps and reinstalling them? If you have trouble uninstalling, you can refer to this article
e.g. powershell Remove-AppxPackage AD2F1837.HPPrinterControl_50.0.0.0_x86__v10z8vjag6ke6
You can then reinstall HP AiO Remote and HP Scan and Capture from the Windows Store.
I work for HP.

Mail not working since iOS 8.2 upgrade

hi - my Mail has stopped downloading to my iPhone 5 mailbox since I uograded to IOS 8.2.
I had a similar issue with 8.02 however that fixed itself after a few days, however whatever I have tried (reinstalling myail account, rebooting the phone) it is still now working.
Does does anybody have and suggestions on how to fix?

no je veux la langue française sur le site tu me comprend?

Help Apache not working since 10.4.10 upgrade

Hello
I have web sharing turned on and I run a small web page on my mac to host photos and such. It was working great until I upgraded to 10.4.10. Now nothing will connect to my web server at all. I have a power PC mac. When I turn on web sharing on my wife's Intel iMac it works fine (i see the apache splash page). Does anyone know what could be broken in 10.4.10? I've tried to restart the web server a few times (it goes on and off but nothing can connect to it).
-Josh

I'm a little embarrassed. FIOS happened to change my IP address (after having it be static for over 3 months) at the exact time I updated to 10.4.10. All I had to do was update my DNS entry and all worked fine. It was tough to figure out because I redirect to 8080 to get around FIOS's residential service blocking port 80 (which Comcast never did, also I had the same exact IP address with comcast for 4 years despite it being "dynamic"). I thought I was having Apache problems, then I thought it was PHP. It ended up being quite a simple problem. Thanks for your help all.
-Josh

IChat av video not working since 10.4.2 upgrade

I was on panther and my iChat and iSight were working fine with video conference with my mother or my sister - i recently upgrade to 10.4.2 and now when i try to invite one of them or either of them i get a message that the video chat disconnected because there is no video from the camera - i have tried 2 different camera and cables and still get the same ...??? any advice?

I had the 'camera is in use by another application' message using my firewire DV camera. After searching around for sugestions, here's what worked for me:
1) repair disk permissions using disk utility
2) locate and delete all quicktime *.plist files ([account-name]/Library/Preferences/
3) delete quicktime 7.0.2
4)empty trash
5)download quicktime from apple
6)reinstall quicktime
7)restart computer
8) repair disk persmissions again (for good luck)
after i took these steps my firewire camera worked with iChatAV
good luck.

Ipod touch 16Gb not working since installing recent O4 upgrade

My Ipod touch 16GB has died !! It stopped during the update when an error message appeared stating unable to SYNC IPOD. Now all I have is a black screen with the Apple Logo, and then a bar appears across the screen underneath the logo as if its trying to install software and show amount of time left. This goes on and on until the battery goes flat !!! Help please

Hi amit,
Am not sure about an old product but yea i once went to get my earbuds replaced under warranty priod. There was some trouble with it and they replaced it. I asked the guy to give me the other earplugs with mic and i can pay the difference. They told that they can only replace the same product even if you have to pay or not.
May be an apple policy or Imagine own policy but that's what I think we can avail being apple users in India. Check for good places who repair iPod as am sure some do. No offence but I can take the chance of getting my ipod repaired from a third party after using it for a substancial amount of time. We all know its our inner feeling and warranty policies which normally hinders us.
But surely you can call Apple support at 18004250744 or Apple sales 1800 425 4646 and confirm about this policy. Also, you can mail Apple directly and check.
Rest if you want to stick to Apple reseller support itself then i would suggest to add a few more to that $230 amount and get the latest iTouch which now comes even in white and has innumerable new features. But never pay such a hefty amount and get the 1st gen itself.
Regards,
Amit

Touchpad scrolling not working since v16.0.2 upgrade.... All other Windows apps are fine. Scrolling even works in Acrobat Reader plug-in within Firefox.

Tried rolling back to a previous version to no avail. Seems the new version has made some permanent changes to the system.

Try to disable hardware acceleration in Firefox.
*Tools > Options > Advanced > General > Browsing: "Use hardware acceleration when available"
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes
*https://hacks.mozilla.org/2010/09/hardware-acceleration/
Try to modify the ui.trackpoint_hack.enabled pref on the about:config page from the default value -1 to 0 or 1 to see if that makes the scroll pad work.<br />
Close and restart Firefox after changing the ui.trackpoint_hack.enabled pref.
*http://kb.mozillazine.org/about:config

HT3258 My Parallels program is now not working since upgrading my MacBook Pro to OS X Mountain Lion. I was wondering if there is a solution to getting this working again?

My Parallels program is now not working since upgrading my MacBook Pro to OS X Mountain Lion. I was wondering if there is a solution to getting this working again?

You just need to update it to the latest version. See:
http://kb.parallels.com/114449

Canon Printer mx860 not working since upgrade to Yosemite, it is connected to my Mac via usb. Any suggestions? Thanks. LL

My 2009 Canon MX860 Pixma printer not working since an upgrade to Yosemite on my MAC version 10.10. It is connected by USB. Have had no previous issues with printing, scanning or faxing. When trying to print my Calendar I only get light vertical dotted lines, none horizontal, no words and vague header colors. Checked printer image on the on my MAC which shows the same problem. All of the color and black cartridges are new.
The recent upgrade to the Canon application says it is completed but it is not, image on application upgrade is a circle with an X.
Any suggestions? Could this simply be a compatibility problem? I'd sure like to keep my Canon printer.
Thanks, LL

Can you open System Information (Applications > Utilities) and select Printers in the left sidebar. If the MX is the only printer connected to the Mac then its information will be shown in the right pane. If you have more than one printer, then a list will be shown in the top right pane. Select the MX to see its information in the bottom right pane. Can you copy this information and paste back here for me to check.
Also an FYI - this is the Mavericks forum. The Yosemite forum is here

Home sharing on apple tv not working since upgrade to yosimite

home sharing with my Apple TV (gen 3) and iMac not working since upgrading iTunes (12.0.01.26) and installing Yosemite (10.10) on my iMac (2008).
everything worked fine before this!

Hey stephenfromdominion,
Thanks for the question. I understand that you are experiencing issues with Home Sharing after upgrading to OS X Yosemite. For troubleshooting information, check out the following resource:
Troubleshooting Home Sharing
http://support.apple.com/kb/ts2972
Thanks,
Matt M.

My scanner (Epson V300) does not work since mountain Lion upgrade.

My scanner (Epson V300) does not work since Mountain Lion upgrade. I updated the drivers,I can get it to work one time when I reboot the iMAC it will function (scan) one time and than not again until I reboot. Help!!!

Try trick #5, at > Eight amazing Image Capture tricks | Macworld

HT6114 My Apple 7.2 mail does not work since I upgraded to OS X Mavericks, what has gone wrong?

My Apple 7.2 mail does not work since I upgraded to OS X Mavericks, what has gone wrong?

Have you tried using http://support.apple.com/kb/HT4505 guidance for scanning? Has always worked for me with my Epson scanner.

I cannot conect to APP Store. I upgraded to IOS 8.3 and APP Store has not worked since. I am being asked to tipe my user name /password and nothing happens afterwards. No error messages either.

I cannot connect to APP Store. I upgraded to IOS 8.3 and APP Store has not worked since. I am being asked to type my user name /password and nothing happens afterwards. No error messages either.

hey the sever is down for the moment try again latter tonight... we have been attepting and i eveen went to the apple store third Street Primonade and alejadnro could not help me he said to try soon
John

Hola not working Since 10.10.2 Upgrade?

Similar Messages

Maybe you are looking for