HOST and SYNCHRONIZE

Can Host command be synchronized? I place SYNCHRONIZE
right after a HOST('java ...') command but I don't
see a performance improvement - seems like I still have
to wait until the HOST command finishes executing the
Java application (thread based) before anything can
continue on. Thanks in advance.

SYNCHRONIZE will update the display with the internal stae of the application (so don't think you should be expecting any performance improvements).
HOST command will generally run synchronously - so it will wait for the host command to finish executing. If you want to asynchronously you could HOST out to a BAT file a put your commands in the BAT file.
Regards
Grant Ronald
Forms Product Management

Similar Messages

Using Host and FPGA.vi in Teststand

Does anyone know how to use the Host and FPGA vi's in Teststand?? A National App Engr told me I have to call the Project that the vi is in to get all the functionality of the FPGA. How do you call a Project in Teststand??
Thanks

Ensure you are using the TestStand version 2010 or above. Create a new instance of a sequence and add a LabVIEW action step to it. Go to Module panel and browse for a LabVIEW project as displayed below.

Need to build communication redundancy using serial RS-232 for Data Transfer b/w Host and RT irrespective of TCP/IP Data Transfer

Hi - I would like to build the logic in which it should accomodate the communication redundancy using serial RS-232 for Data Transfer b/w Host and RT irrespective of TCP/IP Data Transfer.
I want to do data transfer b/w host and RT through RS232 VISA portal whenever TCP/IP ethernet cable has been unplugged from the controller continuosly , it should keep on checking for TCP/IP link re-establishing also , when ever the tcp/ip link established again that time the communication should be using in that link only. This is accomplished by deploying the RT vi as execuatbale file. I made some logic regards to the above said logic , bur it was not working as much I expected.
I request you to go through the attached two VI's and let me know , what I did wrong in that,
Please do the needful.
Attachments:
TCP_Serial_Host.vi ‏33 KB
TCP_Serial_RT.vi ‏41 KB

even i am new to this topic and i am trying to get familiar with these protocols
refer to tcp server/client examples in labview examples

Sending email to 10,000 addresses without knowing Host and Protocols!!

Context:
I am building an "eMail Marketing Campaign" application which takes a list of email addresses (unlimited) and sends an eMail to all of them.
My servlet creates an instance of "MyMailHandler.java/class" and passes a list of addresses.
Problem:
If I want to send email to different user, do I need to know about everyOne's HOST and PROTOCOL. My application recieves list of addresses from a remote server of a data-selling-company so they don't have that info.
Following is the code (hardCode!) of MyMailHandler.
properties.put("mail.smtp.host", "MAIL.DMCDATABASE.COM");
properties.put("mail.transport.protocol", "IMAP");
Question:
How do I send emails to receivers without knowing everyOne's host and Protocol?????? (new to JavaMail)

No, you only need to know the name of your own mail host. It will send the e-mails to those 10,000 addresses for you. And the protocol for sending mail is SMTP, that's all you need to know to send mail. IMAP and POP are protocols for storing received mail messages and so are not relevant to your task.

How do I change an IP address of SQL Server which is locally hosted and is not on cluster?

Hi All,
How do I change an IP address of SQL Server which is locally hosted and is not on cluster?
I am asking about IP for SQL Server, is there a way we can assign a different IP to SQL Server other than the server's(host) IP address? like the same what we do in a clustered env.
aa

Full explanation can seen here:
SQL Server: Configure Listening IP, Port, and Named pipe
http://ariely.info/Blog/tabid/83/EntryId/151/SQL-Server-Configure-Listening-IP-Port-and-Named-pipe.aspx
[Personal Site] [Blog] [Facebook]

I had a iPhone 3G and I change it in to a iPhone 4G 32GB! I have 3 apple ID account. The one I used is edited by host and I know my password but it ask me for my security question and I forgot it! It send a veify email the answer the an email to blu

I had a iPhone 3G and I change it in to a iPhone 4G 32GB! I have 3 apple ID account. The one I used is <edited by host> and I know my password but it ask me for my security question and I forgot it! It send a veify email the answer the an email to <edited by host> and the email <edited by host> that is my other apple ID and the password work on apple but my yahoo account I forgot my password and security question and it won't verify to my email on to my apple email. so it send the answer to <edited by host> and I can't get it! So Can u do something? Both account r also on my iCloud. I can open both apple account but it won't let me buy nothing on my <edited by host> ! On my <edited by host> that one dose let my buy thing but I had lot of thing I bought on <edited by host> I bought lots of movies music and app. I spend lot of money on this account.

It's a really bad idea to post your email addresess - it's an invitation to spam - and I've asked the Hosts to remove them.
This is a user-to-user forum and no-one on here can take any direct action. If your Yahoo address is not working that's something you would need to take up with Yahoo - have you checked it by sending yourself an email to it?
Otherwise you will need to contact Support: go to https://expresslane.apple.com/ and click on 'iTunes' in the center column and then 'iTunes Store' in the right-hand column and proceed from there.

Command to see host and static nat for the same object together

I have researched this but cannot find an answer. ASA running version 8.5.
When you create the config using object NAT you enter the commands as follows
object network <object name>
   host x.x.x.x
   nat (inside,outside) static y.y.y.y
When the config is displayed it separates the host and nat commands in two different sections of the config as follows
object network <object name>
   host x.x.x.x
object network <object name>
   nat (inside,outside) static y.y.y.y
Is there a command that will display it all together (like it was typed in)? Show NAT is something like what I am after but without all of the extra info such as translate_hits, untranslate_hits etc. I need this information but cleaning up the output of a show nat is going to be tough.
Any suggestions?
Thanks.

Sorry, show nat detail is what I meant in the original post in place of show nat.   Show nat detail still has all of the extra info I was trying to avoid. Guess I will be editing a text file.
Thanks for the reply.

The essential guide to DW cs4... by D. Powers: when from wamp to xampp+virtual host and having problems :(

Following the book in chapter 2 I think Ivé followed everything correctly, but have encluded all the things I've edited below.
I was using wamp with no problems but after trying to set up a virtual host and now using xampp im abit lost its probabsomething stupid but I can find the prob.
(This post is abit long and dragged out so I used some colour to try ease the reading..)
When I try to view a dynamic page in live view or in firefox I get the following error:
**when using:
<VirtualHost *:80>
DocumentRoot c:/xampp/htdocs
ServerName localhost
</VirtualHost>
result:
Access forbidden!
You don't have permission to access the requested object.     It is either read-protected or not readable by the server.
If you think this is a server error, please contact the webmaster.
Error 403
thegoodlife
2009/10/13 12:47:48 PM
Apache/2.2.12 (Win32) DAV/2 mod_ssl/2.2.12 OpenSSL/0.9.8k mod_autoindex_color PHP/5.3.0 mod_perl/2.0.4 Perl/v5.10.0
*when using:
<VirtualHost *:80>
DocumentRoot c:/htdocs
ServerName localhost
</VirtualHost>
result:
Object not found!
The requested URL was not found on this server.          If you entered the URL manually please check your     spelling and try again.
If you think this is a server error, please contact the webmaster.
Error 404
thegoodlife
2009/10/13 12:32:58 PM
Apache/2.2.12 (Win32) DAV/2 mod_ssl/2.2.12 OpenSSL/0.9.8k mod_autoindex_color PHP/5.3.0 mod_perl/2.0.4 Perl/v5.10.0
This is what I've done, blue indicating where I have or was meant to edit, red being the relivant context. (hope it helps )
1. Created a new folder called htdocs (C:\htdocs)
2. Changed the pathname to:
# DocumentRoot: The directory out of which you will serve your
# documents. By default, all requests are taken from this directory, but
# symbolic links and aliases may be used to point to other locations.
DocumentRoot "C:/htdocs"
and
# This should be changed to whatever you set DocumentRoot to.
<Directory "C:/htdocs">
3. Created vhosts folder; with a sub-folder called thegoodlife (C:\vhosts)
4. entered new vhost:
# Additionally, comments (such as these) may be inserted on individual
# lines or following the machine name denoted by a '#' symbol.
# For example:
#      102.54.94.97     rhino.acme.com          # source server
#       38.25.63.10     x.acme.com              # x client host
127.0.0.1 localhost
127.0.0.1 dwcs4
127.0.0.1 thegoodlife
127.0.0.1 bin.errorprotector.com ## added by CiD
5.It says uncomment the command by removing the #, (Supplemental configuation.), but this is the origional file; already uncommented?
# Real-time info on requests and configuration
Include "conf/extra/httpd-info.conf"
# Virtual hosts
Include "conf/extra/httpd-vhosts.conf"
# Distributed authoring and versioning (WebDAV)
Include "conf/extra/httpd-dav.conf"
6.Set the permissions and changed the code as instructed, unsing (c:/xampp/htdocs) as advised.
# You may use the command line option '-S' to verify your virtual host
# configuration.
<Directory C:/vhosts>
Order Deny,Allow
Allow from all
</Directory>
# Use name-based virtual hosting.
##NameVirtualHost *:80
# VirtualHost example:
# Almost any Apache directive may go into a VirtualHost container.
# The first VirtualHost section is used for all requests that do not
# match a ServerName or ServerAlias in any <VirtualHost> block.
<VirtualHost *:80>
DocumentRoot c:/xampp/htdocs
ServerName localhost
</VirtualHost>
<VirtualHost *:80>
DocumentRoot c:/vhosts/dwcs4
ServerName dwcs4
</VirtualHost>
<VirtualHost *:80>
DocumentRoot c:/vhosts/thegoodlife
ServerName thegoodlife
</VirtualHost>
Then creating the site definition:
local root forlder: C:\htdocs\thegoodlife\
testing server folder: C:\vhosts\thegoodlife\
URL prefix: http://thegoodlife/
hope i've covered all area's where I could have gone wrong

Just one more thing - the description of what i did while first Kernel appeared:
Happened 2 days ago. Wasn't turning it off for like a day, only sleep mode by closing it. Worked fine all day, wasn't doing anything, except for checking mail 2-3 times and having windows 7 virtual machine opened but doing nothing, everything was going fine. Then closed it without turning off.
Opened 3-4 hours later, everything was working fine for 30 minutes of checking mail, then Kernel appeared. After that pretty much everything i did is described in part 1-5.
Note: all the time MBP was connected to internet via wifi, so updates to both MBP and virtual machine of all programs were possible.
I only shared downloads and desktop folders, so windows couldn't have access to system folder of Mac Os.
Hope this might help...Thanks again.

What is required in the HOST and QUEUE field when ...

Hi
When setting up my printer, i fill the options identical to what follows:
PRINTER: SAMSUNG HOME
DRIVER:    GENERAL
BEARER: LPR <-----------------------------( NOT SURE IF IT IS THE CORRECT OPTION TO SELECT )
The following fields appear once LPR is selected:
ACCES POINT : HOME
HOST:              WHAT COMES HERE?
USER:              SKY00BER
QUEUE:            WHAT COMES HERE?
ORIENTATION: PORTRAIT
PAPER SIZE: A4
if it helps, my printer is SAMSUNG CLX-3175FW. It is Wifi Enable and is connected to my HOME acces point.
please do correct me if there has to be changes to the BEARER or anything else.
i could really use some help.
thanks in advanced.

sky00ber wrote:
Hi,
What is required in the HOST and QUEUE field when setting a WIFI printer?
When setting up my printer, i fill the options identical to what follows:
PRINTER: SAMSUNG HOME
DRIVER:    GENERAL
BEARER: LPR <-----------------------------( NOT SURE IF IT IS THE CORRECT OPTION TO SELECT )
The following fields appear once LPR is selected:
ACCES POINT : HOME
HOST:              WHAT COMES HERE?
USER:              SKY00BER
QUEUE:            WHAT COMES HERE?
ORIENTATION: PORTRAIT
PAPER SIZE: A4
if it helps, my printer is SAMSUNG CLX-3175FW. It is Wifi Enable and is connected to my HOME acces point.
please do correct me if there has to be changes to the BEARER or anything else.
HELP URGENTLY NEEDED!
I'm not sure but I give it a try.Turn your security(WPA/WEP) and Firewall temporarely off. HOST is the IP address of the printer. QUEUE can be YES or a specific amount of prints, like 1,2,3......
If I look at the manual of your printer I see that you can find the IP and MAC addresses in the Network Configuration Report.I don't know what the USER is doing there because if there is a user then there must be a password.
‡Thank you for hitting the Blue/Green Star button‡
N8-00 RM 596 V:111.030.0609; E71-1(05) RM 346 V: 500.21.009

How to change Host and domain name on APS 10g R2

Hi,
I have installed oracle application server 10g rel.2 I want to change the host and domain of the system, what should I do, Plz help.
Thanks and Regards.
Khawar

Hi,
Thanks to all of you for reply, I started without reading any manual to modify host and domain name and after expending several hours finally decided to reinstall APS, with new installation forms runing ok but report server having problem if you see the status of report server in enterprise manager it shows green mark(if you want to stop it via EM it will not), if you check with Report Queue manager it says no report server with the given name,
if you check the report with GETSERVERINFO via browser it says
"REP-51002 Bind to report server AAAAA failed. some one have idea."
some one plz explain me how can I fix it.
Thanks and Regards.
Khawar

How to change Host directory location?(Problems with host and ed)

Hi I'm having a problem with the commands Host and Ed. The problem being that when I run them they send back an error saying
SQL>host
/bin/gnome-terminal: No such file or directory
or
SQL> ed
Wrote file /home/joe/Documents/editfile.sql
/bin/gnome-terminal: No such file or directory
The problem is that /bin/gnome-terminal is not the correct location for my terminal directory, /usr/bin/gnome-terminal is. Are there any suggestions how I can be able to change it? I'm running SQLPlus 11.2.0.1.0 and I'm using ElementaryOS(made from Ubuntu). Let me know if there is any other information needed to help fix this.

This is not a SQL or PL/SQL language question and thus off topic. As it is Linux o/s related, I think it is better suited for the Oracle Linux forum space.
My guess is, from the little info posted, that your TERM environment variable is not correctly set.

[vmware] Best way to share files between host and client

Good afternoon!
I have successfully installed VMware server on my machine and set up a virtual machine, powering Windows XP for study issues (emulation via wine does not do the trick for me). The virtual machine runs fast and stable but does not meet my requirements unless I have two issues faced:
First:
How to access a USB pendrive monunted by the host system properly within the client?
Second:
What is the best way to share file system space between host and client? Should I set up a Samba share which is accessible for both host and client or is it save to grant my VM access to my physical hard disc as a whole (using it as a partition)?
Thanks for answers in advance, I have still quite a lot to learn, when it comes to VMs.
Regards,
~cg

Do not setup your VMware to be able to access your physical disk as a whole. This would have you mounting the filesystem twice, corrupting it in the process.
You /can/ setup VMware with Sharing Folders that lets you share your filesystem (either / or just /home or something else) and that is what I would recommend.
As for accessing the pen drive from both operating systems at once, I'd say use the same Sharing Folders method. I always share /mnt so that I can access my cdrom/USB/etc from the vmware OS.
The sharing folders is basically the same as a samba share, but uses vmware's own method (HGFS). Samba is more secure (if you are worried about your VMware OS breaking from it's shell and attacking your real filesystem, which is unlikely). You need the vmware tools installed to make use of it.

Host and Port

Hi
WHere can I get the Host and Port no of the PI Server
Thanks
PR

Hi,
In addition to above, Just FYI that in PI 7.1 the Http and J2ee port are same..
The discussion about same can be found [here|Re: Architecture of PI 7.1] and [here|Re: ABAP & Java ports in PI 7.1?]
and to check all the info @ single place:
Login to XI ABAP stack -> Run tcode SXMB_IFR -> Choose Option Administration -> Properties Administration ->All properties
Sachin
Edited by: Sachin Dhingra on Apr 2, 2009 10:01 AM

Help with the HOST and START, forms 6i

Hi i like open to image with de Host and Start in Forms 6i.
For example Host('start '||:path||'', NO_SCREEN ); -> is correct if the path is c:\ ... but if the path is more longer with space in white for example C:\Documents and settings ... i put the quotes "C:\Documents and settings ..." but Doesn't open the image, another window (MSDOS) open... :S

Hello,
Try this:
Host('cmd /c START "" "' || :path || '" ');Francois

Oracle9i Host and Text_IO Command Issues

We are currently attempting to migrate from Forms6i to Oracle9i Forms. I understand that the current Host and Text_IO commands execute on the application server tier and NOT on the client. To counter the Host command issue the migration documentation suggests using the 'Client Host Command PJC' demo which can be incorporated into a form. However, the only Host command that seems to respond is the 'Notepad' command. I need to use other Host commands. Has anyone actually used the aforementioned 'Client Host PJC' in an Oracle9i form?
Also, I am aware of a utility being developed by Oracle called 'WebUtil' which is suppose to simplify this process. Any idea when this utility will be launched and made available to developers? Thanks in advance for your help.

Hello:
Robin Zimmermann, [email protected] g feng and every one:
I want to integrate a third party report (it is brio's sqr), so i must run sqr from form with host command.
first i install 9i as on window 2000,sqr .manually run sqr on 2000,then call sqr from form
with host command ,it is just work well.then i use web.showdocument push the report to end-user,my goal has get
But when i do the same on aix 5l,host command seems not response .i can only run this command:
echo hello > /tmp/hello.log.
other system command ,such as " chmod 777 /tmp/hello.log " can't execute ,who can help me or some other ideas?
lixz

HOST and SYNCHRONIZE

Similar Messages

Maybe you are looking for