Host Server NIC setup

I am trying to build a Hyper-V cluster.  I am stuck on the proper setup of the NICs on the 2 Physical servers. Each server has two, 10 Gb fiber ports. One I put on our "iSCSI vlan" (NetApp) and the other on our "server vlan". 
I also have 2 other 1 Gb NICs on the servers for a total of 4 NICs.  Each server has Windows Server 2012 R2 installed.  I have a 3rd server with Windows Server 2012 R2 installed with VMM 2012 R2. Should I set up other vlans? Thanks
me

The type of solution depends on the kind of workloads you're going to run on the host. Generally speaking,  application protocols are better equipped for handling variation in latency and bandwidth, while storage drivers may demonstrate some funny
behavior when connection to the disk becomes unstable. So, in a production environment, I would dedicate those 10Gbps to iSCSI and run the rest of the networks through 2x1Gbps team.
In a lab or development environment, I would sell those 1Gbps NICs on ebay and run all the traffic through 2x10Gbps team :-)
Gleb.

Similar Messages

  • Setup email profile at Remote Desktop Session Host Server

    Hi All,
    We have setup a RemoteApp environment hosted in Server 2012 R2.  We are trying to create outlook profile for remote users during logon.  Our approach is to create customised outlook profile (.prf), and assign it via logon script.  However,
    as the logon scripts are park under AD server (where Outlook is installed under Remote Desktop Session Host server), the script could not find the Outlook.exe, which is obvious as the Outlook wasn't installed on the same server. 
    Can someone advise what we should do to create the outlook profile when users remote logon?  You are also welcome to suggest if you find other better approach.  Thank you.
    Best regards,
    Lih Ping

    Hi Lih,
    Thank you for your post in Windows Server Forum.
    I would recommend just publishing Outlook as a RemoteApp to the RDS Session Host/RemoteApp Server. Once the User configures there email in Outlook, this should register in the User's profile. This should allow the User to send emails through this connector.
    (Quoted from this thread).
    In addition please check below article.
    Creating Outlook Profiles for RemoteApps
    Apart from that suggest you to upgrade the version of RDP client to RDP 8.1 for better feature and functionality.
    Hope it helps!
    Thanks.
    Dharmesh Solanki

  • How to backup Hyper-V host server on DPM 2012 R2

    Hi,
    I'm about to backup my first Hyper-V host server using DPM 2012.  I'm looking for a strategy to back up both the host server and virtual machines.  Note:  I'm not really interested in backing up all the virtual machines.  Many are non-production
    or for testing.  How do you do it?  I was thinking about selecting in the protection group:
    - BMR and SS for the Hyper-V host
    - The C: volume of the Hyper-V host
    - Select the Child partition snapshots of the virtual machines I want to backup.
    In my environment, Hyper-V role is installed on the C: drive, but the virtual machines are stored on E:, which I would not backup directly (volumes) since I'm backing up the VMs using Child partition snapshot.
    Would I be able to restore my Hyper-V host and the selected VMs with a backup like this?
    Anyone want to share how they setup their protection groups for Hyper-V?
    Thanks.

    No, use full server backup (image) if VM config are stored at default storage (disk  C).
    Understanding where your virtual machine files are [Hyper-V]
    Using this method to perform a full server backup is the recommended method because it captures more data than the other method.
    Backing Up Hyper-V Virtual Machines
    http://social.technet.microsoft.com/Forums/en-US/4592bad3-9f5d-4313-b9a0-9da6de7f43c2/restoring-vm-settings?forum=winserverhyperv
    Have a nice day !!!

  • How to use Mac Mini as web hosting server?

    Hi,
    I would like to use my mac mini as a web hosting server.
    I have a few domains that I want to host on my mac mini.
    How do I configure/setup the mac mini?
    Best,
    Leo

    yes, a little. it's nice for people not used to setting up from source or doing tons of stuff in the command line. it installs like any other mac application & puts a nice control pane in system preferences. plus, you can set up for updates to keep everything current with patches.
    I'm not sure how to handle the multiple domains, but whatever you find on apache that covers this should also or mostly apply to you too.

  • Email Send/Receive causes slow access to website host server. Any Suggestions?

    Hello Community.
    "Once you eliminate the impossible, whatever remains, no matter how improbable, must be the truth."
    I have a bit of a weird problem and though it sounds silly, I'm 99% certain of the cause. My business migrated our five different sites to a new web host (shared hosting) about 5 months ago. Since then we've been plagued by a localised speed issue with connecting to that host. The host is a reasonably good one, but for some reason when connecting on our local network ONLY we were having intermittent load problems; anywhere for instant load to 40-50 seconds. After much testing we have arrived at an improbable conclusion; That accessing webmail (e.g. clicking Send/Receive) on any Mac within our network causes a massive and immediate slow-down of website access and smtp connection to any of our five sites held on the shared hosting server.
    Again, I know how strange that sounds, but we've essentially proved it based on ping tests and side by side comparisons of isolated computers. The ONLY computers that are affected are the Macs on the network and also mobile browsers on multiple platforms. Windows based PCs are not affected by the slow down.
    Also, the problem seems to be access based. By that I mean, one a site is accessed it loads almost instantly, but it can take up to 40 seconds of white screen before the site is reached. Interestingly, during this time, the sites' ping speeds are perfectly normal UNTIL the moment when the page is finally accessed and it loads instantly. Once the load triggers the ping speeds increase dramatically to the point where they occasionally time out. Once the site is loaded the ping speeds return to normal (approx 22 ms).
    ... help!
    Important: Things we've ruled out:
    ISP is not a factor (used a 3G modem to rule this out)
    Router is not a factor (see above)
    Switch is not a factor (Tested different switch)
    Individual terminals are not a factor (when removed from the network or isolated on the network the individual terminals perform perfectly. Furthermore when an external mac (iMac laptop) was introduced to the network it performed just as poorly)
    Browser/Operating System/CMS platform not a factor (multiple CMSs have been tested, testing on multiple computers with different versions of OS have been tested, and all sites have different CMSs; Joomla, Concrete 5, Bespoke, and Wordpress of different versions)
    Cpanel setup not a factor (Each site has its own Cpanel account, the are not set up as add-on domains. Furthermore, a similar slow down has been observed on other sites held on that server)
    Mixed platform network not a factor (We removed non-mac based computers from the network and turned off wi-fi to isolate and found no change)
    DNS does not appear to be a factor (We tested multiple DNS including Googles 8,8,8,8 / 8,8,4,4 and found no change)
    Cabling does not appear to be a factor (though the cabling isn't perfect, it's at least Cat5/Cat6, plus it wouldn't affect only our sites)
    Email Client does not appear to be a factor (accessing email via Outlook or Mail App causes the slowdown)
    Important: Things that we suspect
    Computer Year of Manufacture: (though all computers are affected, the problem is most severe on pre-2013 constructed models (regardless of OS)
    POP3/SMTP request immediately triggers the slow down (observed visually as well as in ping tests. No mail needs to be sent/received during this process to trigger the slow down, simply the request causes the spike. We haven't yet been able to test IMAP)
    The Networked Macs (not the individual macs): (the individual computers when isolated on the existing hardware perform fine. Only when they are networked does the slow down occur)
    DNS (Even though we've found no link to DNS, if feeeeels like a DNS issue.)
    CHANGE of host. (We changed hosts due to extremely poor service and tech support. The new guys are fantastic. Though I don't think it's the new host's fault, it's possible that the change of hosts has caused our network to search for our websites in the wrong place)
    Apple Knows Best: Is there something that Macs do with Mail to update a routing table? Like, could a mail application trigger an update to a local routing table?
    Has anybody heard of anything like this before? Or can anybody suggest any possible things to test or change? Even though email requests seem improbable, I can confirm that it has been proved visually and through tests. As you can probably tell, our testing has been extensive so if you notice anything in our test  conclusions that I could add to please... I'm seriously open to suggestions now.
    Any help with this would be much appreciated.
    Kind Regards,
    -TheWebFella

    Hi Linc
    Thanks for the suggestion. Yeah I'd already tried that. It's been deactivated on most of our computers already. Plus like I said, it's different browsers on multiple macs and also some mobile browsers on both iPhone and Samsung on our wireless network. I can confirm that on mac the problem is consistent across Chrome, Firefox as well as Safari.
    Thanks anyway! Any other takers?

  • Deploying OracleAS Single Sign-On Server Cluster setup with a Proxy Server

    I have a question regarding setting up a OracleAS Single Sign-On Server in a cluster mode along with a Apache Proxy Server.
    Step1 - I'm planning to install OracleAS Single Sign-On Server on two nodes sso1.oracle.com and sso2.oracle.com in a Cluster. Both the nodes in the cluster accesed via Load balancer i.e sso.oracle.com.
    Step2 - Then I'm planning to setup two Apache Servers as Proxy Server i.e apache1.oracle.com and apache2.oracle.com. These two apache servers are accessed via Load balancer i.e apache.oracle.com
    The question I have is
    1)while setting up OracleAS Single Sign-On cluster I would provide Load balancer host i.e sso.oracle.com as part of the install. So that all the user requests coming to sso1.oracle.com/sso2.oracle.com get redirected back to Load balancer.
    2)But as part of the Apache Server proxy setup I am also supposed to redirect from SSO server to apache.oracle.com
    But using ssocfg.sh I can only provide either sso.oracle.com or apache.oracle.com NOT BOTH.
    In this case what I should
    1) avoid redirecting to sso.oracle.com instead redirect only to apache server OR are there any other methods to configure.
    I have above setup working fine in DEV environment, where there is only one sso server and one apache proxy server. Problem really comes when I go for setting OSSO server as a cluster in this case I have to redirect to load balancer as well as proxy server?

    why not using webcacheclustering between the apache and the 2 sso's?

  • How to specify Host Server for Replicated Virtual Desktops within RDVH Collection

    My question about how to specify Host Server for Replicated Virtual Desktops within Collection.
    I know there is a aswered thread on this, but that solution (wait a week) didn't work for me.
    So i have 2 servers, RDS01 and RDS02 with both 15 Hyper-V VM's and replicating to eachother. That part works fine.
    Now I wanted to make it easy for my users I build a Connection Broker: RDCB
    All went fine in that setup, but when I want to add the existing VM's from RDS01 and RDS02 to the collection it just radomly adds running ones and replicated ones.
    So both RDS01 and RDS02 have 15 VM's running and 15 replica's in stopped state, but when I look in my collection, it says RDS01 has 23 and RDS02 has 7 VM's. When I add them all, I see he wants to add a lot of stopped states replica's from RDS01 instead of
    the running ones from RDS02.
    How can I specify which one he should use? Or need I disable replication first, setup the whole RDCB collection thing, and then turn replication back on? Or does Hyper-V replication not work at all when used in a collection?
    I hope someone can help out here. I'm googling and trying for 1,5 week now, but i can;t get it right.
    Thanks in advance.

    Hi Robin,
    Thanks for your patience.
    After you removed Replication from 1 machine on both RDS01 and RDS02, please restart that machine. After that, please add this machine to the RD collection again to test how the issue goes.
    As we know, Hyper-V Replica provides asynchronous replication of Hyper-V virtual machines between two hosting servers. It is simple to configure and does not require either shared storage or any particular storage hardware. Any server workload that can be
    virtualized in Hyper-V can be replicated. Replication works over any ordinary IP-based network, and the replicated data can be encrypted during transmission. Hyper-V Replica works with standalone servers, failover clusters, or a mixture of both. The servers
    can be physically co-located or widely separated geographically. The physical servers do not need to be in the same domain, or even joined to any domain at all.
    Currently, would you please add only running state VMs to the RD CB collection? And would you please capture some screenshots of the error message? Thanks very much for your cooperation.
    Best regards,
    Sophia Sun
    Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.

  • CVP Server NIC is down automatically in peak time

    Hi All,
    We have IPCC Setup with IPCC 7.5 and CVP 7.0.
    We have two CVP physical servers (co-resident with Call Server, VXML Server, Media server)
    And call flows work via H323 protocol (not using SIP).
    Load balanced via CSS, Call Routing VIA gatekeeper (ras)
    We have noticed that in peak time any one of the CVP server NIC card goes down and come back automatically after few minutes.
    Any one knows about any bug in CVP 7.0 or any design issue.
    please help us resolve this issue.
    with Regards,
    Manivannan

    That command should return nothing - you have TCP offload enabled. You need to disable those things. This is the cause of instability. There are plenty of references on the Internet about disabling TCP Offload.
    You can do it on the adapter out of the Windows configuration for the Network.
    If it is an HP DL380 in disguise (MCS-7845-H-x) , you can also do it from the HP Network Utility, which is easier to use and you can ensure that the TCP Offload Engine is turned off. Is it an HP box?
    If it is, fire up the utility and tell me if LAN Teaming is engaged across the two NICs. Maybe you know - do you have two CAT5 connections?
    Regards,
    Geoff

  • About settingup tomcat on hosting server

    one of my friend is PHP expert and he has setup his own hosting server for application done in PHP. I have done a website in JSP and Servlets and I want him to host my application on his server. The issue is that he does not know anything about JSPs and Apache TomCat server. I am wondering if some can just help about the issues involved reagrding this:
    I have follwoing questions:
    Is server for JSP and SERVLETS is free to upload on server or licenses etc required?
    Is this hard to setup tomcat on a server? I cansetup everything on PC though(not a network)
    Has someone experience is doing this?
    Do you think a person like me with average knowledge of JSP and SERVLETS shouldtake risk?
    I am trying to google and collecting information about all these issues. I though it's good to have information from someone who has first hand knowledge in this area.
    Thanks

    Areeba wrote:
    Is server for JSP and SERVLETS is free to upload on server or licenses etc required? Read the license of the server in question. As far you can just use Tomcat whenever and wherever you want as long as you don't redistribute it.
    Is this hard to setup tomcat on a server? I cansetup everything on PC though(not a network)It is the same way. Download the zip (or tar.gz in case of *nix system), unpack it and check/set the configuration files in /conf directory.
    Has someone experience is doing this?Uh.
    Do you think a person like me with average knowledge of JSP and SERVLETS shouldtake risk?After all everyone can. Why shouldn't you be able to do so?

  • Add the Hosting Server IP in Domain Name Server of Microsoft

    Hi,
    I have purchased a domain (techwhiz.info) and web hosting from
    www.net4.in but the email is taken from Microsoft exchange for the same domain so the Domain Name Server is with Microsoft. Now I want to host the site for the same domain and as
    www.net4.in hosting provider told to do a entry of Hosting Server IP in DNS then only the website will show the contents. As I don't know how to do this entry so please tell me the steps to do that.
    If required anything more please let me know.
    Thanks in Advance.
    Pratik Purohit

    I'm having a little trouble with your english, but I think you're trying to do 3 things:
    Host email on an Exchange server
    host a website with net4.in
    setup DNS so that these things work together
    It also sounds like Microsoft is hosting your DNS?  If so, you'd simply create an MX DNS record to point to your Exchange 2010 server, and another DNS record for www.techwiz.info.
    You may wish to call the hosting provider(s) of these services for more specific guidance.  Your question is pretty broad.
    Mike Crowley | MVP
    My Blog --
    Planet Technologies

  • Inconsistent rendering on 3rd party hosting server

    Originally, I had uploaded my Muse site to my 3rd party hosting server and none of the formatting or images displayed. I re-uploaded the whole site and now some pages are fine and some are not. For example, I compared the source code for http://spiderinkdesign.com/test/about.html (which displays fine) with the source code for http://spiderinkdesign.com/test/exhibitions.html (which is a mess). The code seems the same and the menu for each is practically the same, the only difference is that "exhibitions" in the submenu should show up as active on the exhibitions page.
    Additionally, other pages display ok but the portfolio function does funky things where the thumbnail images disappear arbitrarily. See http://spiderinkdesign.com/test/etchings.html. The first thumbnail disappears when others are clicked. This happens on all the portfolio pages. Other pages are just missing images.
    So, I've tried uploading the site again incase there was a glitch in the file transfer process with no luck. The site works beautifully on Adobe's business catalyst server http://spiderinkstudio.businesscatalyst.com/about.html. This does not help me as I want to stick with my old hosting setup.
    These issues are not related to ftp permissions problems as Adobe's tech support suggested. So, what am I to do?

    Interesting .... your third party one has completely different coding?
    <meta name="Generator" content="Cocoa HTML Writer">
    Looks like you brought it into another editor first?
    Edit: Although I need admit I have yet to try a third party host because it just makes more sense to me to use BC.
    Message was edited by: Brad Lawryk

  • The Remote Desktop Session Host server is within its grace period Question

    On my Windows 2012 Server, when I open the RD Licensing Diagnoser, I see this:
    The Remote Desktop Session Host server is within its grace period, but the RD Session Host server has not been configured with any license server.
    Configure a license server for the Remote Desktop Session Host server. If you have an existing license server, specify that license server for the RD Session Host server. Otherwise, install RD Licensing on a computer on your network and Configure RD Session
    Host server to use it.
    I have a few questions.  First, I have 10 virtual machines setup (all Windows 7 Enterprise).  I have my 10 VDI licenses for those machines.  Do I need another license for my Remote Desktop Session Host?  If not, how do I license my RD Session
    Host Server?  If so, does anyone know how much they cost?  I have no licensing server.  I just have my Windows 2008 server that is my AD and DNS Server (where my GPO's sit too) and my Windows 2012 server that is dedicated to only running VM's
    for the remote users.

    you should probably speak to a licensing expert as it can start getting fairly complicated and we wouldn't want to advise you incorrectly. Generally if you speak to a LAR (Large Account Reseller) they should be able to provide the guidance you need. 
    You can find more information on licensing virtual desktop through this white paper
    Licensing
    Microsoft's Virtual Desktop Infrastructure Technology
    Regards,
    Denis Cooper
    MCITP EA - MCT
    Help keep the forums tidy, if this has helped please mark it as an answer
    My Blog
    LinkedIn:

  • \\SERVER\Clients\Setup\setup.exe with Windows Vista Error

    I added the first Vista client to an SBS 2003, SP1 domain.  Until now, all clients were WinXP, SP2.  Office 2003 is installed on the XP clients, and the Vista client, which may not be pertinent to this problem.
    As is normal, "\\SERVER\Clients\Setup\setup.exe /s SERVER" is executed when a user logs on to any domain client.  On the Vista client, I always get the dialog -- regardless of the account privilege -- asking for permission to run Setup.exe.  It is annoying.  Occasionally, the Program Compatiblity Assistant will appear and advise there's a known compatiblity issue with Setup.exe.  It points to KB article 926505 for resolution.  The title of the KB is, "Windows Small Business Server 2003: Windows Vista and Outlook 2007 compatibility update."
    When I run the SBS2003SP1-KB926505-X86-ENU.EXE fix, I get the error:  "This update cannot be installed.  Either it is already installed as part of an existing service pack, or it requires a more recent service pack.  For more information, see the systems requirements on the download page."
    I installed Windows Server 2003 SP2 and run the KB926505 fix, but I get the same error  "This update cannot be installed.  Either it is already installed as part of an existing service pack" After a reboot of te SBS server the same  problem on the Vista client, I always get the dialog -- regardless of the account privilege -- asking for permission to run Setup.exe.  It is annoying.  Occasionally, the Program Compatiblity Assistant will appear and advise there's a known compatiblity issue with Setup.exe.  It points to KB article 926505 for resolution.
    The problem is Windows Vista Business, because all windows XP clients have no problem at all.

    PNP,
    You do not say whether if you accept the permission dialog whether the setup continues or not, but the short answer to the question revolves around UAC.
    Remember that EVERY user (except the actual Administrator account) has only Standard user rights regardless of group.  When a task that requires Admin rights is executed, one of three things will happen: 1) If you are THE Administrator, then your task will continue.  2) If you have Admin rights, you will be prompted that a process is trying to use elevated rights and ask for permission, or 3) If you are a Standard user, you will either be denied flatly or prompted to supply credentials.  Which of these happen depend on GPO settings, but the default is to prompt.
    In any event, I believe that this is what you are running into, and is one of the big feature improvements in Vista.  Yes, it can be a bit annoying (Try deleting an "All Users" icon from the Start Menu!) but is there to place one more barrier between virus and malware writers and your OS.
    If it's TOO annoying to bear, you can turn off UAC by going into your profile and disabling it. (It requires Admin rights, of course. )  It is not recommended as you do a very effective job or nutering the Vista Security Model by doing so.
    If it, of course, your choice.  we IT Admins have a lot more issues with this than the standard user, but for me, I gladly take the tradeoff because I worry a lot less about those few I HAVE to give Admin rights to.
    Good luck!

  • [Error] Microsoft SQL Server 2008 Setup. Error reading from file msdbdata.mdf

    Hi all
    I'm trying to install SQL 2008 Express on my Computer: Hp compact DX7300 Slim tower.
    and get this error:
    TITLE: Microsoft SQL Server 2008 Setup
    The following error has occurred:Error reading from file d:\8268cd7b247d294de359c9\x86\setup\sql_engine_core_inst_msi\PFiles\SqlServr\MSSQL.X\MSSQL\Binn\Template\msdbdata.mdf.  Verify that the file exists and that you can access it.
    Click 'Retry' to retry the failed action, or click 'Cancel' to cancel this action and continue setup.
    For help, click: http://go.microsoft.com/fwlink?LinkID=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=10.0.1823.0&EvtType=0xF45F6601%25401201%25401
    Log file
    Overall summary:
      Final result:                  SQL Server installation failed. To continue, investigate the reason for the failure, correct the problem, uninstall SQL Server, and then rerun SQL Server Setup.
      Exit code (Decimal):           -2068643839
      Exit facility code:            1203
      Exit error code:               1
      Exit message:                  SQL Server installation failed. To continue, investigate the reason for the failure, correct the problem, uninstall SQL Server, and then rerun SQL Server Setup.
      Start time:                    2014-12-09 23:22:03
      End time:                      2014-12-09 23:40:28
      Requested action:              Install
      Log with failure:              C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20141209_232121\sql_engine_core_inst_Cpu32_1.log
      Exception help link:           http://go.microsoft.com/fwlink?LinkId=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=10.0.1823.0
    Machine Properties:
      Machine name:                  VISTA-PC
      Machine processor count:       2
      OS version:                    Windows Vista
      OS service pack:               Service Pack 1
      OS region:                     United States
      OS language:                   English (United States)
      OS architecture:               x86
      Process architecture:          32 Bit
      OS clustered:                  No
    Product features discovered:
      Product              Instance             Instance ID                    Feature                
                     Language             Edition              Version         Clustered 
    Package properties:
      Description:                   SQL Server Database Services 2008
      SQLProductFamilyCode:          {628F8F38-600E-493D-9946-F4178F20A8A9}
      ProductName:                   SQL2008
      Type:                          RTM
      Version:                       10
      SPLevel:                       0
      Installation location:         d:\8268cd7b247d294de359c9\x86\setup\
      Installation edition:          EXPRESS
    User Input Settings:
      ACTION:                        Install
      ADDCURRENTUSERASSQLADMIN:      False
      AGTSVCACCOUNT:                 NT AUTHORITY\NETWORK SERVICE
      AGTSVCPASSWORD:                *****
      AGTSVCSTARTUPTYPE:             Disabled
      ASBACKUPDIR:                   Backup
      ASCOLLATION:                   Latin1_General_CI_AS
      ASCONFIGDIR:                   Config
      ASDATADIR:                     Data
      ASDOMAINGROUP:                 <empty>
      ASLOGDIR:                      Log
      ASPROVIDERMSOLAP:              1
      ASSVCACCOUNT:                  <empty>
      ASSVCPASSWORD:                 *****
      ASSVCSTARTUPTYPE:              Automatic
      ASSYSADMINACCOUNTS:            <empty>
      ASTEMPDIR:                     Temp
      BROWSERSVCSTARTUPTYPE:         Disabled
      CONFIGURATIONFILE:             C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20141209_232121\ConfigurationFile.ini
      ENABLERANU:                    True
      ERRORREPORTING:                False
      FEATURES:                      SQLENGINE,REPLICATION
      FILESTREAMLEVEL:               0
      FILESTREAMSHARENAME:           <empty>
      FTSVCACCOUNT:                  <empty>
      FTSVCPASSWORD:                 *****
      HELP:                          False
      INDICATEPROGRESS:              False
      INSTALLSHAREDDIR:              C:\Program Files\Microsoft SQL Server\
      INSTALLSHAREDWOWDIR:           C:\Program Files\Microsoft SQL Server\
      INSTALLSQLDATADIR:             <empty>
      INSTANCEDIR:                   C:\Program Files\Microsoft SQL Server\
      INSTANCEID:                    SQLExpress
      INSTANCENAME:                  SQLEXPRESS
      ISSVCACCOUNT:                  NT AUTHORITY\NetworkService
      ISSVCPASSWORD:                 *****
      ISSVCSTARTUPTYPE:              Automatic
      MEDIASOURCE:                   d:\8268cd7b247d294de359c9\
      NPENABLED:                     0
      PID:                           *****
      QUIET:                         False
      QUIETSIMPLE:                   False
      RSINSTALLMODE:                 FilesOnlyMode
      RSSVCACCOUNT:                  <empty>
      RSSVCPASSWORD:                 *****
      RSSVCSTARTUPTYPE:              Automatic
      SAPWD:                         *****
      SECURITYMODE:                  <empty>
      SQLBACKUPDIR:                  <empty>
      SQLCOLLATION:                  SQL_Latin1_General_CP1_CI_AS
      SQLSVCACCOUNT:                 NT AUTHORITY\NETWORK SERVICE
      SQLSVCPASSWORD:                *****
      SQLSVCSTARTUPTYPE:             Automatic
      SQLSYSADMINACCOUNTS:           VISTA-PC\VISTA
      SQLTEMPDBDIR:                  <empty>
      SQLTEMPDBLOGDIR:               <empty>
      SQLUSERDBDIR:                  <empty>
      SQLUSERDBLOGDIR:               <empty>
      SQMREPORTING:                  False
      TCPENABLED:                    0
      X86:                           False
      Configuration file:            C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20141209_232121\ConfigurationFile.ini
    Detailed results:
      Feature:                       Database Engine Services
      Status:                        Failed: see logs for details
      MSI status:                    Passed
      Configuration status:          Passed
      Feature:                       SQL Server Replication
      Status:                        Failed: see logs for details
      MSI status:                    Passed
      Configuration status:          Passed
    Rules with failures:
    Global rules:
    Scenario specific rules:
    Rules report file:               C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20141209_232121\SystemConfigurationCheck_Report.htm
    I will very appriciate if someone can help me solve it. I was trying to set Full control for my account in Properties/Security of root folder and try again but error is still.
    Many thanks

    Hi Foreverduy,
    Before you run SQL Server 2008 express setup, make sure that you have installed Windows installer 4.5 and.NET Framework 3.5 SP1 manually. For more information about the process, please refer to the article:
    http://msdn.microsoft.com/en-us/library/ms143506(v=sql.100).aspx. Moreover, please turn off all the third-party softwares which could prohibit the installation process.
    According to your error message, the issue could be due to that your account has no rights to install SQL Server, or the corruption on the media.
    Firstly, please ensure that your account has admin rights. Also make sure that you right-click the setup.exe and choose “Run as administrator” to complete the installation.
    Secondly, please check if "msdbdata.mdf" file exists at d:\8268cd7b247d294de359c9\x86\setup\sql_engine_core_inst_msi\PFiles\SqlServr\MSSQL.X\MSSQL\Binn\Template. If it exists, please make sure that your account has read permission to the extracted
    folder.
    However, if the file doesn't exist in the extraction, the media could be corrupt. Please download the
    media
    again and check if the issue still occurs.
    Regards,
    Michelle Li

  • How to email text from a text component in my applet on a the host server ?

    How to email text from a text component in my applet on a the host server, back to my email address ?
    Assuming I have Email Form on the host server.
    Help will be appreciated.

    You can do like below
    =REPLACE(Fields!Column.Value," " & Parameters!ParameterName.value & " ","<b>" & Parameters!ParameterName.value & "</b>")
    The select the expression and  right click and choose placeholder properties
    Inside that set Markup type as HTML 
    then it will highlight the passed parameter value in bold within the full xml string
    Please Mark This As Answer if it helps to solve the issue Visakh ---------------------------- http://visakhm.blogspot.com/ https://www.facebook.com/VmBlogs

Maybe you are looking for