Hostname similar for 2 servers

Hi all,
Do I get error if I Install Oracle 10g on both 2 Linux servers with the following /etc/hosts
server1 > 119.111.9.1 orasvr1.abc.com.ph orasvr1
server2 > 119.111.9.2 orasvr1.abc.com.ph orasvr1
The aliases are the same but the IPs are not
Thanks a lot

Maybe you want to elaborate your setup a bit more. Do you have the datafiles on a network storage that in case server1 has problem you can mount everything on server2 and bring up the database?
Essentially, you have a dilemma here. If you are not going to use the two servers at the same time, there's no need to give two different IP addresses, if you are going to start the two servers at the same time you can't have them with same hostname.

Similar Messages

How to configure email Alerts in OEM Cloud 12c for Database Servers up/down

Hi everybody,
How to configure email Alerts in OEM Cloud 12c for Database Servers up/down status?
Regards,
Miguel Vega

Hi Miguel Vega,
Information regarding the notifications:
==============================
Configuring notification rules in 12c is different from earlier releases.
The concept and function of notification rules has been replaced with a two-tier system consisting of Incident Rules and Incident Rule Sets :
1. Incident Rules: Operate at the lowest level granularity (on discrete events) and performs the same role as notification rules from earlier releases.
By using incident rules, you can automate the response to incoming incidents and their updates.
A rule contains a set of automated actions to be taken on specific events, incidents or problems.
The actions taken are for example : sending e-mails, creating incidents, updating incidents, and creating tickets.
2. Incident Rule Set: A rule set is a collection of rules that applies to a common set of objects, for example, targets, jobs, and templates.
To help you to achieve the Notification Rules configuration, refer those notes :
How To Configure Notification Rules in 12C Enterprise Manager Cloud Control ? Doc ID 1368036.1
EM12c How to Add and Configure Email Addresses to EM Administrators and Update the Notification Schedule ?Doc ID 1368262.1
EM12c How to Subscribe or Unsubscribe for Email Notification for an Incident Rule Set ?Doc ID 1389460.1
EM 12c How to Configure Notifications for Job Executions ? Doc ID 1386816.1
Best Regards,
Venkat

How can I list all the domains configured for Weblogic Servers?

How can I list all the domains configured for Weblogic Servers?
I saw a note, which says the following:
"WebLogic Server does not support multi-domain interaction using either the Administration Console, the weblogic.Admin utility, or WebLogic Ant tasks. This restriction does not, however, explicitly preclude a user written Java application from accessing multiple domains simultaneously."
In my case, I just want to list all the domains, is that possible by using any scripts?
Thanks
AJ

If you use WLS Node Manager and the Config Wizard was used to create the domains, then the list of domains should be in a location like this:
<MIDDLEWARE_HOME>\wlserver_10.3\common\nodemanager\nodemanager.domains
Enterprise Manager Grid Control also has support for multi-domain management of WLS in a console.

Some images do not display in browser, iPad Air 2. When I load a page with several jpgs (one 1920x720, then 8-10 800x800px), only the first few are shown. Behaviour is similar for Safari and Chrome. Website issue or iPad?

I have just bought an iPad, partly to check that my websites work OK on mobile devices. When I load a page with several jpgs (e.g. one 1920x720, then 8-10 800x800px), only the first few are shown. If I remove the large one, that sometimes fixes the problem. Behaviour is similar for Safari and Chrome. Is this a website issue or iPad?

Sorry, I didn't make myself clear. I'm using a new Wordpress theme that is meant to be responsive. The large image is for a header, than you scroll down to see the rest, one by one. Some one the pages work OK on my iPad, typically the old ones where the maximum image size was 500 x 500. It's the new pages and those I've updated that are causing the problem. On the iPad the large image loads, then a couple of the small ones become visible as I scroll down, but then darkness (rather like my knowledge level).
Being new to IOS and iPads, I'm trying to work out whether I should be looking here, or amongst the Wordpress stuff for a solution.
Here's the website with its new theme: http://www.new-zealand-pictures.com/

Need script for getting Uptime for remote servers

Hi Guys,
I'm in need of a script to get the UP time for windows servers in number of days. i have more than 1000 servers.
I dont want PowerShell script as i have many WIndows 2003 servers where PowerShell is not installed.
Please help me with this.
Thanks,
Kiran Raj

Hi,
I'd look at the LastBootUpTime property that can be found by querying Win32_OperatingSystem.
Don't retire TechNet! -
(Don't give up yet - 12,700+ strong and growing)

SCCM 2012 Software Update Management for Windows Servers and how to automatic set SCOM maintenance mode?

Hi,
We planning to go one level higher to automat and have more dynamic Software Update Management for Windows Servers. We have SCCM 2012 R2, SCOM 2012 R2 and SCO 2012 R2.
Our plan is to pur server in an AD-Group to get Update Schedule, from the servers will be importet to an Collection for Automatic Update and reboot. If I understand Everything right SCOM can't read AD-Group and put then in an Schedule maintenance mode. SCOM
can read reg value as exempel.
IS there any smar way to make the SCOM Maintenance Mode Schedule dynamic?
I found this
http://www.scom2k7.com/scom-2012-maintenance-mode-scheduler/?
/SaiTech

You could use Orchestrator to put the servers from a specific collection, or AD group, in maintenance mode in SCOM. For an example see:
http://www.systemcentercentral.com/orchestrator-how-to-scom-maintenance-mode-for-windows-computers-in-an-sccm-collection/
My Blog: http://www.petervanderwoude.nl/
Follow me on twitter: pvanderwoude

IronPort ESA best practice for DNS servers?

Hello!
Is there a best practice for what servers should be used for the Cisco IronPort DNS servers?
Currently when I check our configuration, we have set it to "Use these DNS servers" and the first two are our domain controllers and last two are Google DNS.
Is there a best practice way of doing this? I'm thinking of selecting the "Use the Internet's Root DNS Servers" option as I can't really see an advantage of using internal DC's.
Thoughts?

Best practice is to use Internet Root DNS Servers and define specific dns servers for any domain that you need to give different answers for. Since internal mail delivery is controlled by smtproutes using internal dns servers is normally not required.
If you must use internal dns servers I recommend servers dedicated to your Ironports and not just using servers that handle enterprise lookups as well. Ironports can place a very high load on dns servers because every outside connection results in multiple dns lookups. (forward, reverse, sbrs)
If you don't have enough dns horsepower you are susceptible to a DOS attack either through accident or design. If the Ironports overload your internal dns servers it can impact your entire enterprise.

Selective IP filtering for multiple servers in a domain?

Is it possible to have IP filtering on for certain servers in a
domain, and not for others?
This is the situation:
I am deploying two servers in mydomain, so let's call it serverA
and serverB. I want serverA to accept all connections while
serverB accepts connections only from certain IPs. I know you
can do IP filtering using SimpleConnectionFilter in the
"Connection Filter" option in Security->General tab of the Admin
console, but this turns on IP filtering for BOTH serverA and
serverB! How do I turn it on for one, and not the other? Any
help would be greatly appreciated. Thank you.
Leon

Hi,
Yes you can have muliple servers in a domain. You can create as many managed
servers as your hardware can handle. When you added the server, did you use the
startManagedWebLogic.sh (or .cmd) script to start the server. Once you do that,
you should see the server as running.
Hope this helps,
pat
"MS" <[email protected]> wrote:
>
Hello All,
Is it possible to have multiple servers in a domain?
When I add a new server, the State is reported in the weblogic console
as "UNKNOWN".
What does this mean?
rgds
MS

Client communication port for workgroup servers

We have SCCM 2012 R2 Single Primary Site in intranet. We have PKI with ADCS 2012. We are in process of mirating to HTTPS communication using certificates. We have few servers in workgroup and we plan to manage those servers with configuration manager by
manually installing client and specifying smsmp=sccm fqdn. for lookup management point.
Can we change client communication port for these servers?
For successful client communication do we need to open any ports except 443 in firewall?
What all ports needed to be open in this scenario?

Hi,
You configure the Communications port for the MP in the site so they must use the same ports, you can configure alternate ports so if it cannot communicate on port 443 it tries the next port.
http://technet.microsoft.com/en-us/library/gg712276.aspx
443 is sufficient, the client will also try to communicate on port 10123 for Client Notification,
http://www.google.se/url?sa=t&rct=j&q=&esrc=s&source=web&cd=1&ved=0CCsQFjAA&url=http%3A%2F%2Fblogs.technet.com%2Fb%2Fconfigmgrteam%2Farchive%2F2012%2F09%2F27%2Ffast-channel-for-system-management.aspx&ei=1dAhU7qqOIL8ygPb1IHQAQ&usg=AFQjCNF4_G2sZBMbDDtJa95LBx7EYYBrRw
But it should fallback to 443 if not available as well.
Regards,
Jörgen
-- My System Center blog ccmexec.com -- Twitter
@ccmexec

PAC file support for Proxy Servers

When will AIR support PAC files for proxy servers?
In our network, we can't point to a PAC file because the AIR app simply ignores it, and we experience comms issues because of it. The workaround is to configure the network settings to point directly at the proxy, bypassing the PAC file.
This is a big problem as pointing directly at the proxy means a lot of manual configuration for each user that requires the use of the AIR app.
Any clues or suggestions?

Hi,
Additional configurations (DHCP and DNS) are required when you use Automatically detect settings.
For details, please refer to:
Automatic Detection and Configuration of Browser Settings
http://technet.microsoft.com/en-us/library/dd361887.aspx
Hope this helps.
Jeremy Wu
TechNet Community Support

How to configured mail Alerts in OEM 12c for WebLogic Servers up/down status?

Hi,
I am new in Oracle Enterprise Manager so please tell me How to configured mail Alerts in OEM 12c for WebLogic Servers up/down status?
Thanks,
Sagar Pawar.

Hi Sagar Pawar ,
First you need to set the email notification :
Kindly review :
12c Cloud Control: Steps to Configure Incident Rules to Send Notifications or
Manage Events / Incidents / Problems (Doc ID 1368036.1)
12c Cloud Control: Steps to Configure Email Notification Method (Doc ID 1368262.1)
Regards
Ansari

Hi - Re Keynote I'm trying to figure out how to create a music album on USB flash drive. What I want is a background picture with 'click-buttons' to play each track listed, also similar for embedded videos and photos etc. Is this possible with Keynote ?

Hi - Re Keynote I'm trying to figure out how to create a music album (as an artist) on USB flash drive, (accessible by both Mac and PC). What I want is a background picture with 'click-buttons' to play each track listed, and play in order (like a cd) - also similar for embedded videos and photos etc. This should all be on the one page.
Is this possible with Keynote, or any other software package for Mac (am using Macbook Pro) ?
Gav 88

Hi there,
Yikes, it sounds like you've been doing a lot of work on this project... Unfortunately, however, this isn't the Adobe Encore forum, but the Acrobat.com forum. While it seems like an exciting question, we're not able to address issues pertaining to other Adobe products and services. Here's a link to the Adobe Encore forum, where you're more likely to get help for this specific issue:
http://forums.adobe.com/community/encore
Sorry not to be of more specific help to you. Best of luck!
Kind regards,
Rebecca

Performance Gain for IRIX servers if Personal flag is removed from magnus.conf file.

Performance Gain for IRIX servers if Personal flag is removed from magnus.conf file.

As shipped by SGI, some of the server products have a flag set in the
magnus.conf file setting a small footprint for the servers, generally
less than 1 megabyte of memory. This flag is the Personal flag, and
looks something like:

MaxProcs 1
MinThreads 1
MaxThreads 8
Personal on

For one's own personal use, this is fine. But if CGIs are called, or
if the site sees more traffic, then the flag may need to be removed,
to look like:

MaxProcs 1
MinThreads 1
MaxThreads 8

A significant performance gain, (and a corresponding increase in
memory used), would be seen by increasing the MaxThreads, as well.

For more complete tuning recommendations on SGI/IRIX, please see SGI's
Tuning IRIX 6.2 for a Web Server page

That's a comment in the file. It has no effect at all.

Changing settings for DNS Servers?

I need to enter some DNS settings in order to use certain programs on the network. On a Windowz machine, these settings are entered into an area called DNS suffixes.
I go to Network and try to enter the names into DNS Servers, though it is only allowing me to enter certain characters. For example, it will not let me enter a "l" or a "p." Why is this?
Thanks.

The only thing you can enter for DNS servers is the actual IP address in the form: xxx.xxx.xxx.xxx, e.g., 192.0.100.40

Where is the forum for integrity servers?

Where is the forum for integrity servers?
This question was solved.
View Solution.

Hi dajacobs,
You might want to try http://h30499.www3.hp.com/t5/Business-Support-Forums/ct-p/business-support for server experts.
Thanks,
SunshineF
Clicking the "Kudos star" to the left is a great way to say thanks!
When your problem has been solved, accept the solution by clicking the "Accept as Solution" button to help other members in the future!
Rules of Participation

Hostname similar for 2 servers

Similar Messages

Maybe you are looking for