Hot Sync freezes

Tungsten E2:
I had been using Palm Desktop v 4.1.4 for a number of years on Desktop with XP home OS. Hard drive crashed and I bought a new laptop running Vista. Then I had old hard drive repaired and XP re-installed. Palm download center recommends Desktop v 6.2.2 for both XP home and Vista. I downloaded it to both machines. When I try to hot sync my E2 with either machine it freezes at the same spot. I can see that my data is there on both machines. Should I try to re-install v 6.2.2 or will that wipe out my data.
Post relates to: Tungsten E2

There may be database corruption causing the issue. Click on the following link for the program called DbFixiT. This program has a trial version that you can download and install on your Palm OS device. The trial version will scan for database corruption and then report the corruption. You can then find the records causing the problem and fix them yourself or you can purchase the program and have it automatically fix the records.
http://www.pimlicosoftware.com/dbfixit.htm
To install the program, set all conduits to "do nothing" except quick install or install if using Palm desktop 6.2.
After you install the program on the handheld, run the scan and also scan for Blobs in the calendar.
After you clean-up the database on the handheld, set the conduits in hotsync to handheld overwrites desktop and perform a hotsync.
For reference purposes, click on the following link for the support page for your device on the kb.palm.com webpage.
http://kb.palm.com/wps/portal/kb/na/tungsten/e2/unlocked/home/page_en.html
There are links on the page to the user guide, troubleshooting, how to's, downloads, etc.

Similar Messages

Hot sync freeze

its done this before, & im still unsure about how it happened in the first place.
it freezes on the hotsync, and it keeps saying that "the connection between you handheld and the desktop could not be established. Please check your set up and try again" the only issue though is that it freezes in this area and, its connected to the desktop at all.
Post relates to: Centro (AT&T)

Do you see the hot sync icon (circle with red and blue arrows) on the bottom right of your computer screen? Is there an arrow with the option to "show hidden icons"? If you do not see it there, hot sync will be disabled and you will keep getting that message (the connection between your device and the desktop could not be established...).
To enable the hot sync program once again, click on Start > Programs/All Programs > Palm OS Desktop/Palm One > Hot Sync Manager. It will take about 5-10 seconds and the icon will be there once again.
Now the sync should go through.
Post relates to: Tungsten E2

Hot Sync problems with Windows Vista using a Tungsten E2

Need Help solving a hot sync problem. Have a Tungsten E2, about a year old. Use Windows Vista OS. Can not sync to desktop. It worked fine for awhile then stopped sync'ing. Have reinstalled Palm Software, Have downloaded Palm 6.2. Have deleted all 3rd party apps,,,and their back up files. Particulary,,,,Epocrates apps, Took over my PDA. Installations and updates gets to synchronizing Calender and 'freezes' have left it on overnight figurng lots of data,,,,no progress. I need help. I really enjoy using this equipment. I use my PDA for all my scheduling of work shifts appts etc. I would appreciate some suggestions. Thanks in advance. Mike.
Post relates to: Tungsten E2

Hi.. Welcome to the Palm forums. So if I am understanding you when you try to sync it goes to calendar and freezes and never completes the sync. That being the case the first thing you want to do is go to the conduits and turn off calendar then sync and all should be successful, except calendar will not sync. What this indicates is that you have corrupted data in your calendar, most likely on the E2. Do a google search on your computer for a utility 'dbfixit' and download it to your computer. Extract it so you have the dbfixit.prc file and double click on it to put it in the installer. Then, insuring the calendar conduit is off, sync to install it. Once installed run dbfixit. This utility is free or can be purchased for (I believe) 12.95. The free version will search for corruption and problems let you know where they are and you will have to manually fix or delete them. If you register it, when you run the utility it will find the errors and fix them as well. Once all errors are fixed, turn the calendar conduit back on and you should be able to sync.

Downloaded new iOS for iPhone 5. Now the handset is running hot, keeps freezing on different screens, won't charge on official charger ( only charges on crap poundland one) and battery is loosing 1% every two minutes!

Downloaded new iOS for iPhone 5. Now the handset is running hot, keeps freezing on different screens, won't charge on official charger ( only charges on crap poundland one) and battery is loosing 1% every two minutes! I've closed all apps and reset the complete phone but no luck. Any one know what else I can try apart from a new phone?

I have done a factory reset at 45% battery. After the reset it's still hot and at 35% now

Error: "Conduit Manager quit unexpectedly" during Mac Hot Sync

Hello! After many years of successfully hot-syncing my Palm m500 to my various Macs, i'm suddenly getting an error message every single time my Hot Sync tries to sync the Datebook data:
The application Conduit Manager quit unexpectedly.
Mac OS X and other applications are not affected.
Click Relaunch to launch the application again.
i've already tried reattaching the USB cables and the Palm m500 into the cradle, and rebooting my Mac several times, and removing the "com.palm.xxxx.plist" files and the "Palm Desktop Info" file from my users/library/preferences folder. and i've spent several hours cruising these forums but nothing has worked. I've tried hot synching about 10 times in the last 12 hours but i keep getting this same error.
i also tried slowing down my hot sync by pressing the Shift key on my Mac during the entire hot sync, but i still get this error:
Conduit Manager: Unexpected error #-111
i tried to paste my full log report below but i ran into the 20k character limit for this form. since it looks like it's "Thread 4" that is causing the crash, i've deleted other parts of the log report but can send those to you in another posting if that would help.
thanks in advance for any help you can offer! i love my Palm m500 as I much prefer it to Apple's iCal system and would like to fix this problem so I don't need to abandon my Palm!
Report:
Process:         Conduit Manager [217]
Path:            /Applications/Palm/Conduit Manager/Contents/MacOSClassic/Conduit Manager
Identifier:      com.palm.HotSync.ConduitManager
Version:         3.2.1 (3.2.1)
Code Type:       PPC (Translated)
Parent Process: launchd [144]
Interval Since Last Report:          657 sec
Crashes Since Last Report:           1
Per-App Interval Since Last Report: 41 sec
Per-App Crashes Since Last Report:   1
Date/Time:       2010-01-03 00:20:36.147 -0800
OS Version:      Mac OS X 10.5.8 (9L31a)
Report Version: 6
Anonymous UUID: 26B9A75C-009B-45C3-B160-FB5932991E00
Exception Type: EXC_BAD_ACCESS (SIGSEGV)
Exception Codes: KERN_INVALID_ADDRESS at 0x00000000160fc198
Crashed Thread: 4
Thread 0:
0   translate                         0xb81529ef spin_lock_wrapper + 90931
1   translate                         0xb8183633 CallPPCFunctionAtAddressInt + 169935
2   translate                         0xb81861e2 CallPPCFunctionAtAddressInt + 181118
3   translate                         0xb80dfb0b 0xb8000000 + 916235
4   ???                               0x8138b831 0 + 2167978033
Thread 1:
0   ???                               0x800bc286 0 + 2148254342
1   ???                               0x800c3a7c 0 + 2148285052
2   translate                         0xb818b6ea CallPPCFunctionAtAddressInt + 202886
3   ???                               0x800ed155 0 + 2148454741
4   ???                               0x800ed012 0 + 2148454418
Thread 2:
0   translate                         0xb81529ef spin_lock_wrapper + 90931
1   translate                         0xb8183633 CallPPCFunctionAtAddressInt + 169935
2   translate                         0xb81861e2 CallPPCFunctionAtAddressInt + 181118
3   translate                         0xb80dfb0b 0xb8000000 + 916235
4   ???                               0x8138b831 0 + 2167978033
Thread 3:
0   translate                         0xb81529ef spin_lock_wrapper + 90931
1   translate                         0xb8183633 CallPPCFunctionAtAddressInt + 169935
2   translate                         0xb81861e2 CallPPCFunctionAtAddressInt + 181118
3   translate                         0xb80dfb0b 0xb8000000 + 916235
4   ???                               0x8138b831 0 + 2167978033
Thread 4 Crashed:
0   ???                               0x7c00867b 0 + 2080409211
Thread 5:
0   translate                         0xb8152c24 spin_lock_wrapper + 91496
1   translate                         0xb816c825 CallPPCFunctionAtAddressInt + 76225
2   translate                         0xb80bdb8b 0xb8000000 + 777099
3   translate                         0xb80b7007 0xb8000000 + 749575
4   translate                         0xb80d49c0 0xb8000000 + 870848
5   translate                         0xb813d75f spin_lock_wrapper + 4259
6   translate                         0xb8011b64 0xb8000000 + 72548
Thread 6:
0   translate                         0xb815289e spin_lock_wrapper + 90594
1   translate                         0xb816e8a7 CallPPCFunctionAtAddressInt + 84547
2   translate                         0xb80dfb0b 0xb8000000 + 916235
3   ???                               0x819d8c92 0 + 2174586002
Thread 4 crashed with X86 Thread State (32-bit):
eax: 0x98c10f16 ebx: 0x00000200 ecx: 0x160fc198 edx: 0xf01804e0
edi: 0xb81d8794 esi: 0xb81d8770 ebp: 0x80817f80 esp: 0xb019eeec
   ss: 0x0000001f efl: 0x00010213 eip: 0x7c00867b   cs: 0x00000017
   ds: 0x0000001f   es: 0x0000001f   fs: 0x0000001f   gs: 0x00000037
cr2: 0x160fc198
Thread 4: (0xb011c83c, 0xb81529ef)
0x00163b90: No symbol
0x94f46bb0: /System/Library/Frameworks/CoreServices.framework/Versions/A/Frameworks/CarbonCore.framework/Versions/A/CarbonCore : _YieldToThread + 532
0x94f4bfa4: /System/Library/Frameworks/CoreServices.framework/Versions/A/Frameworks/CarbonCore.framework/Versions/A/CarbonCore : _SetThreadState + 172
0x94f4becc: /System/Library/Frameworks/CoreServices.framework/Versions/A/Frameworks/CarbonCore.framework/Versions/A/CarbonCore : _SetThreadStateEndCritical + 136
0x15dd37c8: /Library/Application Support/Palm HotSync/Transports/Serial/Contents/MacOS/Serial Transport : _SemWait__7LThreadFP10LSemaphorelR4QHdrRUc + 144
0x15ddcb90: /Library/Application Support/Palm HotSync/Transports/Serial/Contents/MacOS/Serial Transport : _BlockThread__10LSemaphoreFl + 92
0x15ddca38: /Library/Application Support/Palm HotSync/Transports/Serial/Contents/MacOS/Serial Transport : _Wait__10LSemaphoreFl + 104
0x15dd1eb4: /Library/Application Support/Palm HotSync/Transports/Serial/Contents/MacOS/Serial Transport : _Run__Q27LThread7CleanupFv + 48
0x15dd3df8: /Library/Application Support/Palm HotSync/Transports/Serial/Contents/MacOS/Serial Transport : _DoEntry__7LThreadFPv + 64
0x94f4bdf4: /System/Library/Frameworks/CoreServices.framework/Versions/A/Frameworks/CarbonCore.framework/Versions/A/CarbonCore : _CooperativeThread + 348
0x913bf1d4: /usr/lib/libSystem.B.dylib : __pthread_body + 40
0x00000000: /System/Library/Frameworks/Carbon.framework/Versions/A/Support/LaunchCFMApp :   + 0
PPC Thread State
srr0: 0x00000000    srr1: 0x00000000                     vrsave: 0x00000000
cr: 0xXXXXXXXX        xer: 0x00000000        lr: 0x91335120        ctr: 0x9132e1f0
r00: 0xffffffe1     r01: 0xf0101ae0     r02: 0x00000013     r03: 0xf0101b8c
r04: 0x00000003     r05: 0x00000018     r06: 0x00000020     r07: 0x00006187
r08: 0x00000000     r09: 0x00000000     r10: 0x00000000     r11: 0xa020568c
r12: 0x9132e1f0     r13: 0x00000000     r14: 0x00000000     r15: 0x00000000
r16: 0x00000000     r17: 0x00000000     r18: 0x00000000     r19: 0x00000000
r20: 0x00000000     r21: 0x00000000     r22: 0x00000000     r23: 0x00000018
r24: 0xf0101b8c     r25: 0x00000020     r26: 0x00006187     r27: 0x00000000
r28: 0x00000000     r29: 0x00000003     r30: 0x00000003     r31: 0x94f469a4
Thread 5: Crashed (0xb019eeec, 0x7c00867b)
0x7c367b28: No symbol
0x7c364a58: No symbol
0x7c364b44: No symbol
0x7c35a818: No symbol
0x7c34a3bc: No symbol
0x7c347fe8: No symbol
0x7c34813c: No symbol
0x7c32da54: No symbol
0x7c329168: No symbol
0x7c327e70: No symbol
0x7c32763c: No symbol
0x7c32884c: No symbol
0x7c346c48: No symbol
0x7c346ec0: No symbol
0x8536c290: No symbol
0x8536cf30: No symbol
0x8536cb6c: No symbol
0x8536e004: No symbol
0x85366484: No symbol
0x85372680: No symbol
0x853c949c: No symbol
0x94f4bdf4: /System/Library/Frameworks/CoreServices.framework/Versions/A/Frameworks/CarbonCore.framework/Versions/A/CarbonCore : _CooperativeThread + 348
0x913bf1d4: /usr/lib/libSystem.B.dylib : __pthread_body + 40
0x00000000: /System/Library/Frameworks/Carbon.framework/Versions/A/Support/LaunchCFMApp :   + 0
PPC Thread State
srr0: 0x00000000    srr1: 0x00000000                     vrsave: 0x00000000
cr: 0xXXXXXXXX        xer: 0x20000000        lr: 0x7c367a80        ctr: 0x9132f590
r00: 0x00000008     r01: 0xf01804e0     r02: 0x15f2f000     r03: 0x00000003
r04: 0x1610beb8     r05: 0x00000002     r06: 0xf018051c     r07: 0x00000000
r08: 0x000eb2a4     r09: 0x00000000     r10: 0x00800000     r11: 0xa0882d04
r12: 0x9132f590     r13: 0x00000000     r14: 0x003f252c     r15: 0x00000001
r16: 0x001751f0     r17: 0x003f2558     r18: 0x003f2588     r19: 0x003f2518
r20: 0x003f24e8     r21: 0xf0181426     r22: 0x00144c00     r23: 0x00000003
r24: 0x00000008     r25: 0x15f32dcc     r26: 0x15f32d54     r27: 0x0000ffff
r28: 0x000095bf     r29: 0x15f3705c     r30: 0x15f37060     r31: 0x00893ca8
Post relates to: Palm m500
Post relates to: Palm m500

I had the same problem syncing my Palm TX with 10.5.8. After being without my Palm for 3 weeks, I bought Snow leopard, and all was fine again. I found out at an Apple store that 10.5.8 was full of propblems, and this was one of them.
Fast forward: I've been using 10.6 ever since it was released, happily syncing away with my Palm ... until Friday night (2 days ago), when it stopped working, and then I discovered that Palm does not and will not support Mac OS 10.6. So I'm urgently trying to migrate everything on Palm to my iPod Touch, exporting to 10.4 on an old iBook, since it will still sync with it, then moving the data to my iMac's 10.6, and then syncing with my iPod Touch.
I'm working on the problem now, and have my Schedule migrated, but now need to get my ToDo, Address Book and Memos done.
The 10.6 Address Book (v5.0.1) doesn't support the Palm's custom fields like Tiger's Address Book (4.0.6). I can't yet find a way to export the Palm's ToDos in a format that iCal can consume, and Notes on the iPod (for my Memos, possibly) is not supported on 10.6 yet for my iPod Touch.
1 step forward, 3 steps back, so far; but absolutely necessary, now that Palm has withdrawn from the Mac market.
Any ideas on these 3 problem areas, from anyone, would be most welcome.

Palm m125 stylus won't work after hot sync

Yesterday I dropped my m125 and the batteries fell out. I didn't notice right away and the system did a hard reset.
When I put the m125 in the cradle and did a hot sync, it updated everything and then I got a message I needed to reset the palm. When I clicked on the reset button, I went directly to a screen that says Preferences on the LHS and Date and Time on the RHS. My stylus no longer works properly at this point. When I touch the home icon, it does not register. If I try to navigate anywhere using the stylus, it registers that I am touching somewhere else on the screen. There is no way I can get to the home screen so I can go through the welcome and calibrate the stylus.
I uninstalled the palm desktop software, restarted the machine and reinstalled the software. Same exact problem. I installed the DigiFix free software, hot synced to add the program and ... same exact problem.
IF I take the batteries out for a hard reset, then the palm is working exactly correctly.
But I can't get any of my information back unless I hot sync, which renders the palm useless again.
IF I could download the keyboard software, I could hypothetically manually add all the lost info a little bit faster than using the touch screen. But I can't find the software and I will be vulnerable to losing everything again if I can't hot sync the stuff back onto my computer.
One other thing I don't know if it is relevant, even after I uninstalled, restarted and reinstalled the palm desktop software, all of my original data was still available. Shouldn't it be gone if I had removed the entire program? Does it matter?
Post relates to: Palm m125

After the hard reset; are you able to align your screen? If I am following you correctly you are saying this is the case, and only after the sync the digitizer will no longer align.
If this is the case you may have corrupted data in you Palm Desktop. First I would rename the backup folder under your original user name and sync again to see if this will resolve the issue. If not then you can create a new user name in your Palm DT, then hard reset the device again, then choose to sync to the new user name you created instead of the original user name. Then you could export your original data to a (original user name) file, and then import the data under the new user name to restore your data.
When you delete the Plam DT application it does not remove the data file. When you
re-install the Palm DT software it will re-associate to the original data. This is why the data came back.

Palm Centro - Vista - Hot Sync Problem

Hello: I have a Palm Centro (Verizon) and am having major issues hot synching to my new Windows Vista (32 bit) home PC. I continually get the following error message:
"Error: SgConflictNotifier.dll failed a confirmation query and cancelled the sync operation."
"HotSync Error: An application canceled synchronization or failed to respond to a HotSync notification. Please ensure that you are not currently editing data using applications such as Palm OS Desktop or Install Tool (8009)."
I am running Hot Sync Manager 7.0.2 and Palm desktop by ACCESS 6.2.2.
When I tried the Hot Sync operation on my old XP computer, no issues whatsoever. Can anyone help?
Thanks
Seca2man
Post relates to: Centro (Verizon)

I am having the same issue as are several people on this board. I have attempted to reinstall the application and reset my Treo but still nothing. I would be interested if there is a fix I am missing.

Zire 71 Hot Sync

Help!!!
My old computer died, and I have a new PC with Windows 7 and 64-bit architecture.
I have installed the Palm OS and copied my data files over to the new PC, and I can run the Palm program on the new PC.
Howerer.........the Hot Sync feature will not work, and I am guessing it must be the move from 32-bit to 64-bit, but I have no idea how to resolve this issue.
Can anyone help? [email protected]
Many thanks in advance.
Post relates to: Zire 71

Hello mjh4001, thanks for reminding everyone!
We've had a link to this and instructions posted as a sticky post for over a year now. See the "64 bit Windows USB drivers for Palm Desktop" thread at the top of this section of the Forum.
Acceca really stepped up to the plate, eh?
WyreNut
I am a Volunteer here, not employed by HP.
You too can become an HP Expert! Details HERE!
If my post has helped you, click the Kudos Thumbs up!
If it solved your issue, Click the "Accept as Solution" button so others can benefit from the question you asked!

Hot sync Palm m500

I have a couple of old, but ever so useful, Palm m500/m505 PDAs, which I could hot-sync with my old PC running on Windows XP. Now I have up-graded to PC with Windows 7 Home Version - 32 bit and am at my wit's end trying to hot sync my PDA data on to my PC Palm Desktop.
As I am of the older generation, (a senior citizen), could an expert give me step-by-step instructions on how to resolve my problem. My Palm m500 PDA has too many contacts to manually transfer.
Also can I convert PDA contacts to Outlook Address Book and then hot-sync with Palm m500 series PDA ?
Waiting anxiously for help and guidance ..........

Hello myrarego,
I see that you are having a problem syncing your Palm device to your PC.
I would suggest posting your problem here at the HP Commercial Forum as well. This forum is specific to Palm products and you may find some more assistance.
↙-----------How do I give Kudos?| How do I mark a post as Solved? ----------------↓

Hot synced Zire 71 with Windows Vista

I have a Zire 71 and I just bought a Toshiba laptop with Vista 32bit. I was able to hot-sync the Zire successfully and the files loaded onto the laptop. But when I looked at the Palm desktop, there was nothing whatsoever. No data whatsoever. Nothing. Obviously the problem is with Vista.
What can I do to get my files to appear on the Palm Desktop? Is it possibly related to the file extensions having a problem with Vista, or is there an add-on to fix this?
HELP!!!!!!!!
Many thanks in advance!
Ronald
Post relates to: Zire 71

Many thanks. I have two Users; I tried both, but neither worked. Still nothing at all. Wny? What else should I try?
Ronald

Hot Sync with Non-latin Character Display Problem

I have a XP Home Desktop with Palm Desktop 4.01 installed. When I do a hot sync with my Sony Clie T655C, the chinese characters are display correctly in both XP home Desktop and the Clie.
Now, I have a netbook with window7 Starter installed for travelling use. It took me a while to resolve the problem on the hotsync with window 7 starter and sony clie. At the end, I have Palm desktop v6.2 and Palmhotsyncsetup from pimlico on the netbook. I am able to do a hotsync with cradle/cable, but not through network (with TCP/IP not listen error message).
I have installed the chinese, English, french IME for the window 7 Starter netbook. I am able to type Chinese character in Notepad and Word and display the character correctly. I am able to save the file ( filename in both chinese and english character), re-open it and all characters are displayed correctly.
But with Palm Desktop v6.2, I am able to type chinese and the characters are displayed correctly in calendar/data book. When I close the palm desktop and re-open it again. All the characters become "?", as a result, I can not fully evaluate the software Pimlico for window desktop. As it only works with Palm desktop v6.2.
Any suggestion?
Post relates to: Palm TX

I have a XP Home Desktop with Palm Desktop 4.01 installed. When I do a hot sync with my Sony Clie T655C, the chinese characters are display correctly in both XP home Desktop and the Clie.
Now, I have a netbook with window7 Starter installed for travelling use. It took me a while to resolve the problem on the hotsync with window 7 starter and sony clie. At the end, I have Palm desktop v6.2 and Palmhotsyncsetup from pimlico on the netbook. I am able to do a hotsync with cradle/cable, but not through network (with TCP/IP not listen error message).
I have installed the chinese, English, french IME for the window 7 Starter netbook. I am able to type Chinese character in Notepad and Word and display the character correctly. I am able to save the file ( filename in both chinese and english character), re-open it and all characters are displayed correctly.
But with Palm Desktop v6.2, I am able to type chinese and the characters are displayed correctly in calendar/data book. When I close the palm desktop and re-open it again. All the characters become "?", as a result, I can not fully evaluate the software Pimlico for window desktop. As it only works with Palm desktop v6.2.
Any suggestion?
Post relates to: Palm TX

Need help with hot sync

My palm Zire 72 lost all battery power, and all infor on it went away. I did a hot sync with my
computer a few days ago. When I sync with my palm it usually takes from palm to computer,
now I need everything from the computer to the palm. How do I do that? I don't want to loose my info.
Post relates to: Zire 72

Right click on the hotsync icon in your task bar and select custom. Then highlight each conduit select change and set to desktop overwrites handheld.
Post relates to: Centro (Sprint)

Problem Hot Syncing my Palm 105 under OS X 10.4.4

I get the message on the M105: "Your handheld computer & the desktop could not be established ..."
I am connecting the M105 via a USB/Serial cable, which works when I connect it to the USB port on my PC laptop. I have had it connected to the IMAC at start up.
I have installed Palm OS 4.2.1. I decided to try iSync and enabled Isync for the palm. ISync recognized the palm and told me to press the hot sync button on the M105. Before Isync completed, the M105 gave the "non-connection" message above. Isync help info. suggests syncing with Palm Hot Sync manager before using Isync. However, I was unable to do that -- I kept getting the same message on the M105. The Isync log indicates that it connected, but the M105 sure didn't think so, and my address/date info is not in the Palm desktop.
The Missing Sync tool does not list the M105 as being supported.
What to do?

Your assumption is correct -- that's what I'm trying
to do. The Radio Shack cable goes from serial to USB
and I hook the M105 to that cable and then into the
USB port on the Mac. It does work on the USB port on
the Dell machine. On the Dell, I do the same thing
I'm trying to do on the MAC. I connect the M105 to
the Radio Shack serial to USB cable and hook it into
the USB port. On the Dell laptop, I can also connect
the M105 without the Serial/USB cable to the serial
port on the Dell. Either way it works.
So, if I understand correctly, you're saying I need
to buy the kit from Palm, or if I buy the Keyspan
cable, does it also come with a matching OS X
driver?
Doesn't the Palm 4.2.1 Version A Desktop that I
download for OS X come with the matching OS X
driver? When I do the download, it asks me for the
device and for the MAC OS.
Thanks again
I had presumed that you were indicating that you
intended to synchronize an m105, using its serial
interface, to a Macintosh. A serial to USB
converter
is required in that case, similar to those
suggested
above, because your m105 is a serial device and
your
Macintosh has no serial port.
The serial to USB converter is a kit, containing
both
a hardware adapter and a matching OS X driver.
Without both, your m105 cannot communicate with a
Macintosh through its USB port.
I have now successfully hot synced the Palm 105 under OS X 10.4.4. I purchased a Keyspan 19HS USB Serial Adapter. I tried the installation over the weekend, and it didn't work. I entered E-Mail on their web site to give details but didn't hear back from them. Today (Thurs. 2/9/06), I called their support telephone no. I nice tech support person guided me through downloading a beta version of their software, necessary for OS X10.4.4, and lo and behold, it all worked.
I'm giving these details in case someone else has this problem -- may save you some time.
Thank you to Michael Lafferty for his good advice.

I need a Tungsten t5 manual, a CD, and a hot sync device for it

I have been using myEbay purchased Tungsten T5 mostly the calendar function, memos, contacts, etc. However, I would like to be able to hot sync it to my Mac G5 power mac computer with OS X.5.8, both to upload and download between both devices and use all of their joint capabilities. I would appreciate anyone advising me where I can acquire these accessories. I just have no luck dealing with Palm. I'm a greenhorn to this forum. Any answers out there?
Post relates to: Tungsten T5

Here's a link to the T5 support page on Palm.com!
http://kb.palm.com/wps/portal/kb/na/tungsten/t5/unlocked/home/page_en.html
WyreNut
I am a Volunteer here, not employed by HP.
You too can become an HP Expert! Details HERE!
If my post has helped you, click the Kudos Thumbs up!
If it solved your issue, Click the "Accept as Solution" button so others can benefit from the question you asked!

Cannot find Hot Sync Log File

I recently installed Palm dsktop on my new Vista PC. It synchs very well with my TX via bluetooth, BUT whenever there is a Hot Sync Log Message I get an error message saying that the PC cannot find the Hot Sync Log. I searched for this file on my PC but it cannot be found anywhere. I am using Mozilla Firefox as my web browser. Is there a solution to this?
Post relates to: Palm TX

You could view it on your device. Go to HOTSYNC and tap "Log".
Post relates to: Zire 71
Post relates to: Zire 71
webosnation.com is another option for help.

Hot Sync freezes

Similar Messages

Maybe you are looking for