How applet write in a URL plz.. plz..

how applet can write in URL
like this
URL url = new URL(file://c:/some.mov);
in this url applet want to write
for this what i have to do......

Double post, is allready answerd here:
http://forum.java.sun.com/thread.jspa?threadID=577956&tstart=0

Similar Messages

How applet write file in local system by URL instead of FileOutputStream()

hi,
how can applet write a file in local system through URL instead of FileOupStream()
plz.....plz.....plz......
URL url = new URL(" file://c:/temp.txt");
in this url how applet can write
plz....

URL uses http to cummunicate, this means you can send and receive data using the http
protocol.
The OS doesn't do anything with this, you need a http server to interpret these messages
and take appropriate action (with server side script or CGI).
So if the client has a http server installed and has server side script thad does
something with your http request (that's what a url does) than it is possible.
Since both having a http server , server side script and or CGI have nothing to do with
signed applets I will not answer your question here.
But the mail reason I won't answer it is because it makes no sence to use a URL to write
to the local file system.

Can you plz tell m how to write Design Strategy in the scenario IDoc-- File

Hi,
can any body plz tell me how to write Design strategy, Preprocessing logic and post processing logic in the scenario IDoc-->File.
    My idoc is:
            Message Type: ZMMIPORDCHG
            Basic Type : ORDERS05.
lookup's are available.

Hi,
take a look at this document for an IDOC to IDOC Scenario,
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/cdded790-0201-0010-6db8-beb9bb2b2660
Use it as a template to design one side of the Interface and also take a look at this blog,
/people/prateek.shah/blog/2005/06/08/introduction-to-idoc-xi-file-scenario-and-complete-walk-through-for-starters
Regards,
Bhavesh

Really need help on how to write this program some 1 plz help me out here.

i am new to java and i confused on how to be writing this program.
i have completed the Part 1 but i am stuck on Part 2 & 3 so it would would be really great if any 1 could help me out on how to write the program.
Part I
An algorithm describes how a problem is solved in terms of the actions to be executed, and it specifies the order in which the actions should be executed. An algorithm must be detailed enough so that you can "walk" through the algorithm with test data. This means the algorithm must include all the necessary calculations.
Here is an algorithm that calculates the cost of a rectangular window. The
total cost of a window is based on two prices; the cost of the glass plus the cost of the metal frame around the glass. The glass is 50 cents per
square inch (area) and the metal frame is 75 cents per inch (perimeter).
The length and width of the window will be entered by the user. The
output of the program should be the length and width (entered by the user)
and the total cost of the window.
FORMULAS:
area = length times width perimeter = 2 times (length plus width)
Here is the corresponding algorithm:
read in the length of the window in inches
read in the width of the window in inches
compute the area
compute the cost of the glass (area times 50 cents)
compute the perimeter
compute the cost of the frame (perimeter times 75 cents)
compute the total cost of the window (cost of glass plus cost of frame)
display the length, width and total cost
The next step would be to "desk check" the algorithm. First you would need to make up the "test data". For this algorithm, the test data would involve making up a length and a width, and then calculating the cost of the window based on those values. The results are computing by hand or using a calculator. The results of your test data are always calculated before translating your algorithm into a programming language. Here is an example of the test data for the problem given:
length = 10
width = 20
area = 200, glass cost= 100.00 (area times 50 cents)
perimeter = 60, frame cost = 45.00 (perimeter times 75 cents)
total cost =145.00
Once the test data is chosen, you should "walk" through the algorithm using the test data to see if the algorithm produces the same answers that you obtained from your calculations.
If the results are the same, then you would begin translating your algorithm into a programming language. If the results are not the same, then you would attempt to find out what part of the algorithm is incorrect and correct it. It is also
necessary to re-check your hand calculations.
Each time you revise your algorithm, you should walk through it with your test data again. You keep revising your algorithm until it produces the same answers as your test data.
?Now write and submit a Java program that will calculate the cost of a rectangular window according to the algorithm explained. Be sure to prompt for input and label your output.?
Part II
Write, compile and execute a Java program that displays the following prompts:
Enter an integer.
Enter a second integer
Enter a third integer.
Enter a fourth integer.
After each prompt is displayed, your program should use the nextint method of the Scanner class to accept a number from the keyboard for the displayed
prompt. After the fourth integer has been entered, your program should calculate and display the average of the four integers and the value of the first integer entered raised to the power of the second integer entered. The average and result of raising to a power should be included in an appropriate messages
(labels).
Sample Test Data:
Set 1: 100 100 100 100
Set 2: 100 0 100 0
Be sure to write an algorithm first before attempting to write the Java code. Walk through your algorithm with test data to be sure it works as anticipated.
Part III
Repeat Part lI but only calculate the average, not the power. This time, make sure to use the same variable name, number, for each of the four numbers input. Also use the variable sum for the sum of the numbers. (Hint: To do this, you may use the statement sum = sum + number after each number is read.)
For Part 1 this is what i got
import java.util.Scanner;
public class Window
     public static void main(String[] args)
          double length, width, glass_cost, perimeter, frame_cost, area, total;
          Scanner keyboard = new Scanner (System.in);
          System.out.println("Enter the length of the window in inches");
          length = keyboard.nextInt();
          System.out.println("Enter the width of the window in inches");
          width = keyboard.nextInt();
          area = length * width;
          glass_cost = area * .5;
          perimeter = 2 * (length + width);
          frame_cost = perimeter * .75;
          total = glass_cost + frame_cost;
               System.out.println("The Length of the window is " + length + "inches");
               System.out.println("The Width of the window is " + length + "inches");
               System.out.println("The total cost of the window is $ " + total);
     Enter the length of the window in inches
     5
     Enter the width of the window in inches
     8
     The Length of the window is 5.0inches
     The Width of the window is 5.0inches
     The total cost of the window is $ 39.5
Press any key to continue . . .
Edited by: Adhi on Feb 24, 2008 10:33 AM

Adhi wrote:
i am new to java and i confused on how to be writing this program.
i have completed the Part 1 but i am stuck on Part 2 & 3 so it would would be really great if any 1 could help me out on how to write the program.Looks like homework to me.
What have you written so far? Post it.
Part I
An algorithm describes how a problem is solved in terms of the actions to be executed, and it specifies the order in which the actions should be executed. An algorithm must be detailed enough so that you can "walk" through the algorithm with test data. This means the algorithm must include all the necessary calculations.
Here is an algorithm that calculates the cost of a rectangular window. The
total cost of a window is based on two prices; the cost of the glass plus the cost of the metal frame around the glass. The glass is 50 cents per
square inch (area) and the metal frame is 75 cents per inch (perimeter).
The length and width of the window will be entered by the user. The
output of the program should be the length and width (entered by the user)
and the total cost of the window.
FORMULAS:
area = length times width perimeter = 2 times (length plus width)
Here is the corresponding algorithm:
read in the length of the window in inches
read in the width of the window in inches
compute the area
compute the cost of the glass (area times 50 cents)
compute the perimeter
compute the cost of the frame (perimeter times 75 cents)
compute the total cost of the window (cost of glass plus cost of frame)
display the length, width and total cost
The next step would be to "desk check" the algorithm. First you would need to make up the "test data". For this algorithm, the test data would involve making up a length and a width, and then calculating the cost of the window based on those values. The results are computing by hand or using a calculator. The results of your test data are always calculated before translating your algorithm into a programming language. Here is an example of the test data for the problem given:
length = 10
width = 20
area = 200, glass cost= 100.00 (area times 50 cents)
perimeter = 60, frame cost = 45.00 (perimeter times 75 cents)
total cost =145.00
Once the test data is chosen, you should "walk" through the algorithm using the test data to see if the algorithm produces the same answers that you obtained from your calculations.
If the results are the same, then you would begin translating your algorithm into a programming language. If the results are not the same, then you would attempt to find out what part of the algorithm is incorrect and correct it. It is also
necessary to re-check your hand calculations.
Each time you revise your algorithm, you should walk through it with your test data again. You keep revising your algorithm until it produces the same answers as your test data.
Now write and submit a Java program that will calculate the cost of a rectangular window according to the algorithm explained. Be sure to prompt for input and label your output.
Part II
Write, compile and execute a Java program that displays the following prompts:
Enter an integer.
Enter a second integer
Enter a third integer.
Enter a fourth integer.
After each prompt is displayed, your program should use the nextint method of the Scanner class to accept a number from the keyboard for the displayed
prompt. After the fourth integer has been entered, your program should calculate and display the average of the four integers and the value of the first integer entered raised to the power of the second integer entered. The average and result of raising to a power should be included in an appropriate messages
(labels).
Sample Test Data:
Set 1: 100 100 100 100
Set 2: 100 0 100 0
Be sure to write an algorithm first before attempting to write the Java code. Walk through your algorithm with test data to be sure it works as anticipated.So this is where you actually have to do something. My guess is that you've done nothing so far.
Part III
Repeat Part lI but only calculate the average, not the power. This time, make sure to use the same variable name, number, for each of the four numbers input. Also use the variable sum for the sum of the numbers. (Hint: To do this, you may use the statement sum = sum + number after each number is read.)Man, this specification writes itself. Sit down and start coding.
One bit of advice: Nobody here takes kindly to lazy, stupid students who are just trying to con somebody into doing their homework for them. If that's you, better have your asbestos underpants on.
%

Adobe always quits unexpectedly in Mac when I read a bit fast. How can i deal with it, plz?

Adobe always quits unexpectedly in Mac when I read a bit fast.
It is the latest update.
How can i deal with it, plz?

You posted in the forum for iPad and iPhone (different app). I've moved your question to the Reader forum for desktop/laptop computers.

Hello i forgot my i cloud password..anyone can help me to find my password.i already make a new apple id..but my icloud use another account..so how to reset my iCloud account plz hel me

hello i forgot my i cloud password..anyone can help me to find my password.i already make a new apple id..but my icloud use another account..so how to reset my iCloud account plz hel me

Making a new Apple ID is not a good idea, since you have to reset the password for that Apple ID anyway. All of your purchases are tied to the Apple ID that the iCloud account was created under. So, you have to retrieve the password for that Apple ID in order to sign into iCloud anyway.
Go to Manage your Apple ID, and click on the Reset Password option (Apple - My Apple ID). Sign on with the Apple ID that the iCloud account was created under, and answer the security questions. If you do not remember the answers to the Security Questions, contact Apple Support to have them reset:
ACCOUNT SECURITY CONTACT NUMBERS
Cheers,
GB

How to write a applet with multiple menu

Hi all,
How to write a applet with multiple menu or please tell me where can I get a examples
thanks

i'm writing a project and it seem not work with browser. If anyone can help please leave me a e-mail so that i can send my source to you.
Thanks so much

My iCloud passward forgat . How to delete old id ? Plz Help me..

My iCloud passward forgat . How to delete old id ? Plz Help me..

Hi Subrata,
Unfortunately, you cannot delete it. You would have to enter the password in order to delete the old Apple ID from your device. If you do not remember the password, please visit: https://iforgot.apple.com/ If this doesn't work, please directly contact Apple.
With kind regards,
David

TS3682 I have forget my restriction passcode how I can get it?plz help

I have forget my restriction passcode how I can get it?plz help

You are out of luck. There is no way to recover it and now you will have to restore your iPad as new and you will lose everything on it. If you restore from a backup, you will just be restoring the forgotten restrictions passcode onto the iPad.
If by some chance .... You have a backup that was created before you put the restrictions passcode on the iPad, you can restore from that backup, but if not, you have to restore as new.

How to write a recovery disc in my hp probook 4530s?

i have baught this probook 4530s from Dubai.. and i didnt know how to write a recovery disc in dvds...?
So plz help me?
or should i get the recovery dvds from hp office?

zalakpatel wrote:
i have baught this probook 4530s from Dubai.. and i didnt know how to write a recovery disc in dvds...?
So plz help me?
or should i get the recovery dvds from hp office?
Hi,
Please select option(s) from this link to create a set of Recovery disc for your machine.
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

How to write Sync service in ABAP

Dear Experts,
              i m very new to ABAP dev, can anybody help me how to write a sync service in ABAP and how to call a function module in to that sync service.
               My requirement is i want to upload the data from the clint and download the data to client from the backend. i had written the function module to create a customer in CRM, now i want to push the data to create a customer from the client, for this i need to write a sync service for above requirement,
            plz help me out how to write a sync service.
                       Regards
                        eswar

Hi Jyotirmoy,
Check this thread for Subquery
http://help.sap.com/saphelp_nw04/helpdata/en/dc/dc7614099b11d295320000e8353423/content.htm
Correlated, non-scalar subquery:
REPORT demo_select_subquery_1.
DATA: name_tab TYPE TABLE OF scarr-carrname,
      name LIKE LINE OF name_tab.
SELECT carrname
INTO TABLE name_tab
FROM scarr
WHERE EXISTS ( select *
                   FROM spfli
                   WHERE carrid   = scarr~carrid AND
                         cityfrom = 'NEW YORK'        ).
LOOP AT name_tab INTO name.
WRITE: / name.
ENDLOOP.
This example selects all lines from database table SCARR for airlines that fly from New York.
Scalar subquery:
REPORT demo_select_subquery_2.
DATA: carr_id TYPE spfli-carrid VALUE 'LH',
      conn_id TYPE spfli-connid VALUE '0400'.
DATA: city TYPE sgeocity-city,
      lati TYPE p DECIMALS 2,
      longi TYPE p DECIMALS 2.
SELECT SINGLE city latitude longitude
INTO (city, lati, longi)
FROM sgeocity
WHERE city IN ( select cityfrom
                    FROM spfli
                    WHERE carrid = carr_id AND
                          connid = conn_id      ).
WRITE: city, lati, longi.
This example reads the latitude and longitude of the departure city of flight LH 402 from database table SGEOCITY.
Thanks,
Vinay

How to write a code for open new txt file in swing

hai all,
now i do one project in java.that project's GUI is Swing. But i don't known swing (basic).So how to write a code for open new txt file and "Open window " in menu item on swing.that means when i click the "New" on menu that time open a new txt file. open also like that type.
plz give me that code ! very urgent
Advance Thanks !
RSK

Swing Tutorial:
http://java.sun.com/docs/books/tutorial/uiswing/index.html
Since you don't know the basic of swing read the tutorial, it is for your own good because it is useless if we provide you with a code you don't even understand and how it works.
If you want a menu read the tutorial about using menus and for opening a file read using JFileChooser.
note: don't use the word urgent because it implies that your problem is more important than others.

How to write Select statement for this codition

I need to check whether SGTXT contains BELNR value.
SGTXT is a text field and It should be matched with BELNR
How to write select statement for this.
Select AUGBL AUGDT into t_BSAD
from BSAD
where SGTXT should have the given BELNR Value.
Plz note : Here I cannot give as SGTXT = BELNR as coz BELNR have only 10 digits.

Hi,
data temp(12).
concatenate '%' belnr '%' into temp.
Select AUGBL AUGDT into t_BSAD
from BSAD
where SGTXT like temp.
If belnr is having multiple values,just create a internal table as follows.
types : begin of ty,
        belnr....
        temp(12),
        end of ty.
data itab_ type standard table of ty.
data wa type ty.
loop at itab into wa.
concatenate '%' wa-belnr '%' into wa-temp.
modify itab from wa index sy-tabix transporting temp.
endloop.
Change your select statement accordingly.
Kindly reward poits if it helps.

Can any one tell me how to write the properites files and how to acces

can any one tell me how to write the properites files and how to acces thoose files
plz let me no
thanks in advance

http://www.exampledepot.com/egs/java.util/Props.html

How to write Coloumn level Trigger

sir,
using ORACLE9i..
i want a sample code to write a coloumn level triger.plz help me in this rgard.
thanks in advance.

Repeated thread:
how to write Coloumn level Trigger

How applet write in a URL plz.. plz..

Similar Messages

Maybe you are looking for