How attend error in forms menu like pragma exception_init ?

hello,
I have problem with error in my menu. I created menu and I put code to my buttons in menu:for example execute_trigger('test');
I have some forms and if I am in another forms and call my button with execute_trigger('test');
I get error FRM-40700: No such trigger: test
Its ok because I have trigger in another block. But how to attend this error. I put pragma execption_init but not work
declare
text exception;
pragme exception_init(text,-40700);
begin
execute_trigger('test');
exception
when text then
message('its work');
end;
I create code like this in menu;
execute_trigger('test');
if form_failure then
message('its work');
end if;
end;
and this work but I get error FRM-40700: No such trigger: test and next message is 'its work'. How to turn off message from forms?? or like this message make like pragma...
regards

thanks for reply.
trigger exist but in another block.
I check system.message-level
thanks
I find another solution
I put procedure which verificate current_block and current_form and then call execute_trigger(). It's work
Edited by: user515960 on 2010-07-18 02:43

Similar Messages

  • How to create a DVD menu like an animated Flash Menu?

    Hello.  I'm trying to figure out how to create an animated menu in Encore for a DVD, much like how menus are that are created in flash.  How can I create one in Encore for a DVD menu?  Thanks.

    Use After Effects:
    Adobe Encore * Using After Effects to enhance menus
    http://help.adobe.com/en_US/encore/cs/using/WSA5513911-0AD1-440c-BDAD-2E0E806B425E.html

  • How to mimic Pull Down Menu like APEX WORKSPACE

    Hi,
    I want to have Pull Down Menu like APEX Workspace pages where Application Developer, SQL Workspace, Team Developement and Administration have menus attached to them.
    They appear in Pull Down format.
    I want to mimic the same in my application. I have Pull Down List template and created a list region. It is showing the menus but I want the width and height of the lists to be same as that of APEX Workspace pages.
    I have very little knowledge about javascript and others. I am familiar with PL/SQL.
    Please help.
    Thanks,
    Mehabub

    Mehabub Sheikh wrote:
    Hi,
    I want to have Pull Down Menu like APEX Workspace pages where Application Developer, SQL Workspace, Team Developement and Administration have menus attached to them.
    They appear in Pull Down format.
    I want to mimic the same in my application. I have Pull Down List template and created a list region. It is showing the menus but I want the width and height of the lists to be same as that of APEX Workspace pages.
    I have very little knowledge about javascript and others. I am familiar with PL/SQL.The best way to get help with layout/visual formatting/CSS/JavaScript is to create an example on apex.oracle.com and post developer credentials for the workspace.

  • How can I create tree menu (like windows explorer) in Portlet

    On my page I need a portlet which will be a tree menu (expandable and collapsable).Items in the menu are just URLs.
    EG: Main menu
    SubMenu1
    -Item11
    -Item12
    -Item13
    Submenu2
    -Item21
    -Item22
    -Item23
    I crated a menu portlet in 9iAS portal R2, But it is not able to expand or collaps inside the same region.
    When I clik on Submenu1 it open a new window and Items are dispayed on window. I do not want that, I need to see all items in a submenu at the portal region itself, then when I clik on that Item(URL) I wiil get that new page/file as per the URL.
    On the menu portel design/layout screen of Oracle9iAS portal, it looks good (with exand/collaps), I want the exact same functionality for the menu on my page region.
    Please give me a quick answer

    Hi,
    This is not possible with Portal right now. You can run the menu as a tree by clicking on the frame view icon at runtime of the menu in the full page mode. This is not possible on the page.
    Thanks,
    Sharmila

  • Show Reports Error in Forms

    Hi,
    is it possible to show the Reports error in Forms. Like
    IF rep_status = 'FINISHED' THEN
    WEB.SHOW_DOCUMENT('http://localhost:8889/reports/rwservlet/getjobid'
    || SUBSTR(v_rep,INSTR(v_rep,'_',-1)+1)||'?'||'server=rep_server','_blank');
    ELSE
    ===> SHOW ME THE PROBLEM
    END IF;
    Regards, Peter

    Hi,
    You can display the Reports errors indirectly - through the database....
    You can create a table in which the reports errors are inserted as well as the date , time , user. Next , the form module can read this row using the max(date) and max(time) and the username .
    Simon

  • How to trace the form functions

    Can some help me how to trace the form functions like who has executed the function and when it has been exectued.
    Please let me know if a table is already exists for tracing the form functions.

    I am not sure that this would serve the purpose or not but still, I guess its worth to atleast be mentioned,
    http://www.oracle-base.com/articles/9i/DBMS_TRACE.php
    HTH
    Aman....

  • I am getting error while attaching Menu Module to FORM

    Hi to everyone, I have created a Menu Module(mmx file), now i am trying to attach that menu to a FORM, I have entered the proper Menu Module address in the property window of that FORM, but i am continously facing the following problem.
    FRM-40738: Argument 1 to builtin CALL_FORM cannot be null
    Also i have applied following code in that Menu Module
    call_form('F:\Database Files\Contingent Database\Forms & Reports\Forms\BILL DETAIL.fmx');
    but the required FORM is not running.
    Please help me to sove out this problem

    I did this today, in this way,
    I create the menu then CRT-SHIFT K, then CRT -T
    then check you have the mmx
    - now you put full path to the form
    Menu module like c:\aaa\bb\menuname
    I did not put extension
    Hope this will work.

  • My iPad2 Apple logo (the blue box with a capital A) was deleted in error. I would like to know how to replace it or get it back.  Thanks so much . . .

    My iPad2 Apple logo (the blue box with a capital A) was deleted in error. I would like to know how to replace it or get it back.  Thanks so much . . .

    Do you mean the App Store app on your iPad ? If you do then it can't be deleted, but you might have hidden it via Settings > General > Restrictions > Installing Apps 'off' - if that is 'off' then turn it back 'on' and the app should show on one of your iPad's home screens again

  • Imported old family video, I seperated different events, how can I save event to put together in a menu like family, vacation, christmas.

    Imported old family video, I seperated different events and named each event, how can I save event to put together in a menu like family, vacation, christmas to make a DVD

    revdhayes wrote:
    I imported 5 1 hour old video in Final Cut Pro X. I spent all day seperating clips with Start and end then naming each clip in properties..
    Sorry, but I don't understand  what "5 1 hour video" means.
    I do understand that you have a lot of clips that you want to group by various subjects, like vacation, etc. That's a perfect job for keywords, which perhaps is what you used when you named them?
    If you did use keywords, go to that TL Index and click Tag at the top and then the keyword icon at the bottom. It should give you a list of only clips in that category. Select clip from the menu and it should highlight them. You could then copy and paste them to a new project for export. Repeat as necessary.
    If you're going to do a lot of these, I'd suggest doing this from the event browser, applying keywords and then the clips into separate projects.  But there are always more than one way to do things, and to each his/her own.
    Again, I don't have any idea how long your footage is and whether it is even possible (or desirable) to fit it on to a single DVD. I mentioned iDVD because of its menu and sub menu capabilities. You will need another app like Compressor to do the chapter makers (unless Apple updates FCP before you finish your project and adds that capability. That would be nice,)
    Good luck.
    Russ

  • How to get the form name which is used in standard tcode like me23n in sap

    how to get the form name which is used in standard tcode like me23n in sap
    Moderator message: four out of four threads locked, please read and understand the following before posting further:
    [Rules of engagement|http://wiki.sdn.sap.com/wiki/display/HOME/RulesofEngagement]
    [Asking Good Questions in the Forums to get Good Answers|Asking Good Questions in the SCN Discussion Spaces will help you get Good Answers]
    Edited by: Thomas Zloch on Nov 18, 2011 1:32 PM

    how to get the form name which is used in standard tcode like me23n in sap
    Moderator message: four out of four threads locked, please read and understand the following before posting further:
    [Rules of engagement|http://wiki.sdn.sap.com/wiki/display/HOME/RulesofEngagement]
    [Asking Good Questions in the Forums to get Good Answers|Asking Good Questions in the SCN Discussion Spaces will help you get Good Answers]
    Edited by: Thomas Zloch on Nov 18, 2011 1:32 PM

  • How to find trace file error in form

    hai all,
    i have big problem in my form in apps i open the form one error is ocuured,
    i got the trace file and check the error,
    PARSE ERROR #82:len=2903 dep=0 uid=173 oct=3 lid=173 tim=4265689973879 err=904 this is the trace file error meassage,
    how to find this error in form and also this is occured one select statement,how to find this select statement where can be used in form,
    i have one button ,when ever i press the button this error is ocuured,i check this button pl/sql procedure code but in this code not using that sql statement,
    if any one know to find the sql statement through trace file.
    plz give the replay as soon as possible.
    thank's

    The newest SQL Developer can converts the trace to readable format too, I'm not shure if you see the sql statement related to the error then.
    It seems you get ORA-00904 which says you use an invalid coumn in a dml statement.
    Normally such error should pop up in message - do you overwrite the message handling or use exception handling in you form which block this message?
    Easiest way to find this is to compile the form against the target database.
    If this does not give an error, you should check, if you use dynamic sql statements which are wrong.
    If you call database routines from your form, than this could be the errro cause too.

  • How to call dicoverer through menu option in forms

    Hi,
    Need help.........Can anybody tell me .....how to call dicoverer through menu option in forms.
    Thanx
    Sunil

    Hi,
    You can define a Form Function filling the basic information and
    HTML call Set as OracleOasis.RunDiscoverer. You can even define Paramters during the form function registration. With this definition you will able to create a link to a Discoverer workbook that will automatically open Discoverer Plus or Viewer to display the workbook using Apps security.
    Please refer to the following Metalink Note for more details:
    278095.1- How to Create a Link to a Discoverer Workbook in Apps11i
    Hope This helps
    - Sanjeev

  • How to run the 9I report from the forms menue 9i

    how to run the 9I report from the forms menue 9i.
    Shehzad Latif

    Hi,
    1. create a Reports Object node in Forms. If you use teh same object node name then you can write generic code that works in all Forms
    2. Get the whitepaper about Forms/reports integrtion
    http://otn.oracle.com/products/forms/pdf/frm9isrw9i.pdf
    Frank

  • How do i disble edit menu's delete item on the oracle forms 11i

    How do i disble edit menu's delete item on the oracle forms 11i
    i have an oracle form that i created using standard template, i am able to disable the edit.clear button but cannot disable the edit.delete button.
    Pelase help.

    Hi user6010265
    Welcome here :)
    but unfortunatly u mis-choose the right forum pls follow the following link they might be more helpful than us..
    Transfer alert in 11i
    Regards,
    Abdetu...

  • How to compile forms menu on a  Solaris machine

    Our environment is oracle 9ias.
    I ftp a Form menu (M584000.mmb) and tried to compile using the following command:
    ./f90genm.sh module=$FORMS90_PATH/M584000.mmb userid=
    I am getting the following message: FRM-10043: Cannot open file.
    Is there any other way? Help!!!!!!!

    try to exec ./f90genm (without the .sh)
    This will open an Xwindow that would let you choose the file, module type, compile options, etc... (MUST BE RUN XWINDOW)
    I've compile mine like this :)

Maybe you are looking for

  • How to use objects from other SWCs in my BPM Integration Scenario

    Dear all, I am experiencing some difficulties with the following. I have created a BPM Integration Scenario in a SWC. It contains a tranformation step in which a message from that SWC is split and mapped to two IDOCs. These IDOCs are imported in anot

  • Whats a good tutorial site for starting with Flash?

    I have searched far and wide all over the internet and I can't seem to find any good tutorial sites on how to make nice text animations, example, making something sparkle, or making the text spin. If any of you could help it would be appreciated imme

  • Calling Multiple Normal Screens

    Hi All,         I have 6 Normal Screens. Now I want  to call One by one in sequence. How can it will be possible? In Dialog programing Thanks in Advance

  • Which version of iway sap adapter is compatible with SOA 11g

    Hi, I am doing a POC on iWay SAP adapter connectivity with BPEL 11g, so kindly let me know which version of iWay SAP adapter i need to install for the same. If you have any document for the installation steps of the iWay SAP adapter kindly share the

  • Standby Gaps after changing sys password

    Hi all, 11.2.0.1 aix6.1 I changed our sys password at primary db and copy the "orapwdprod" from source dbs  to "orapwdproddr"  at standby dbs. But I noticed that the log is not sync.   1  SELECT ARCH.THREAD# "Thread", ARCH.SEQUENCE# "Last Sequence Re