How to use objects from other SWCs in my BPM Integration Scenario

Dear all,
I am experiencing some difficulties with the following. I have created a BPM Integration Scenario in a SWC. It contains a tranformation step in which a message from that SWC is split and mapped to two IDOCs. These IDOCs are imported in anothern SWC which I use for common objects. I have created Abstract Message Interfaces based on these IDOCs in this "COMMON" SWC, but the probIem is that I cannot use them in my scenario in the other SWC. Even though I have a usage dependency (Installation Time) created to the "COMMON" SWC.
Any suggestions would be much appreciated!!
Thanks in advance.
Will happily provide points for good answers.
Auke

Thus, I would have to copy/import all objects to the same SWC?
Or create a separate SWC for BPM Integration scenarios?
I have tried to create the Abstract Message Interface in the SWC and reference it to the IDOC structure in the "COMMON" SWC. This results in a reference to an invalid object during activation. Even though the defined usage dependency.
What's the standard solution?
Cheers,
Auke
Message was edited by:
A. Schotanus

Similar Messages

How to use assign from other program ?

is there any way to "point" ( assign ) on field of structure
in other program ?
my goal is ...
i don't find any point of exit in ME21N that hold the
last data of the quantity "menge" .
i done debug , and i found that "MEPO1211" hold it ,
but it is not active in my exit .
so ...
is there any way to be in my exit and point on
structure in other program in my exit ?
thanks .

Hi dakota,
yes it is possible. ABAP still supports the dynamic assign althought no official documentation on this is available.
I'm not on system now, so take the following sample and adapt to your needs.
CONSTANTS: BSL(20) VALUE '(SAPMF05A)BSEG-BSCHL'.
FIELD-SYMBOLS: <BSL>.
ASSIGN (BSL) TO <BSL>.
IF SY-SUBRC = 0.
* do what you want to do
ENDIF.
I guess, in your case it will be something like
field-symbols:
<menge> type ekpo-menge.
ASSIGN '(MEPO1211)EKPO-MENGE' to <menge>.
IF SY-SUBRC = 0.
* do what you want to do
ENDIF.
Although the SAP docu said that it is for internal use and may be changed in the future it still works fine for all global structures, variables and even global internal tables.
Regards
Clemens

How do I move objects from other package to a newly created one?

How do I move objects from other package to a newly created one?
Thanks!

Dear Anthony Pham ,
for changing objects from one package to another package
open that object for example Report
open the report and than click GOTO select OBJECT DIRECTIORY ENTRY
than it will open a popup in that popup click the change and give the new package
Thanks
Surendra

How to transport objects from one server to another server?

How to transport objects from one server to another server.ie..from development to testing sewrver....

Hi Manoj,
Check these links
http://help.sap.com/saphelp_nw2004s/helpdata/en/93/a3a74046033913e10000000a155106/frameset.htm
http://help.sap.com/saphelp_nw2004s/helpdata/en/a8/5e56006c17e748a68bb3843ed5aab8/frameset.htm
Transporting Objects IR ID using CMS
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/f85ff411-0d01-0010-0096-ba14e5db6306
http://help.sap.com/saphelp_nw2004s/helpdata/en/e1/69a740aa053a13e10000000a155106/frameset.htm
You can choose either File transfer methor or CMS. File transfer method is the simplest.
Sachin

"Your script uses objects from a non-existent collection"

I have a multiple page form with a barcode on each form. I created a separate collection for each barcode. The auto generated code looks fine and has the correct collection created, however I still get the error, Paper Forms Barcode error "Your script uses objects from a non-existent collection".
I'm not sure what is wrong and I don't know how to fix it. Anyone else run into this?

You will need to create a shared folder in Dropbox, then populate that with what ever folders you need to organize the files. It appears the DropBox app,will not handle this, but you can do, it by logging in to you account via Safari. Once the folders are created, they will show up in the app. Likewise with designating the folders as shared. Anyone you wish to share with will need a Dropbox account. (using the public folder will not work since links out it are for files only, not folders. An odd restriction, but it is what it is).
IF you have copies of the files on a PC, you will find that will be the easiest place to upload them from. If they are only in iBooks on the iPad, you will need to synch and use the file management function to copy them off. not sure if you can synch them back over to DropCopy within iTunes (never tried it).
DEpending on your needs, a couple of apps to look into are iCab Mobile (a browser), and GoodReader (doc viewing and management app). Both integrate well with DropBox.

How to backup files from other user logged in as administrator

RE: How to backup files from other user logged in as administrator AND/OR how to repair drive with "Invalid catalog PEOF"
Hello,
My MacBook Pro computer’s hard drive is not booting.
I booted with the base operating system and ran Disk utilities and I got the following messages:
    Invalid catalog PEOF
    The volume could not be verified completely.
    This disk needs to be repaired.
    Disk utility can’t repair this disk. Backup as many files as possible, reformat the disk,
    and restore your backed-up files.
The problem is that I have a couple of USERS set up on this computer, and it won’t let me backup the files of the second user. The folders are locked and I can’t access them, even though I am logged in as the administrator.
I made a boot disk on my other computer ( a MacPro Early 2008 ) desktop computer with the DiskWarrior 4.4 updater,
but it won’t boot on my MacBook Pro.
How can I backup these user files so that I can copy them back once I fix the drive?
or better yet, How can I repair the Invalid catalog PEOF on this drive?
Thank you in advance for your time!
Bill
THIS IS THE COMPUTER
================
17” MacBook Pro 2.8GHZ 4GB Ram (purchased in 2009).
Model: A1297
Running Mac OSX 10.9.5

Try using Disk Utility/Restore to copy the backup to a new location. Please note that this will reformat the destination partition which will erase all data.
Do a backup. Boot to the Recovery Volume (command - R on a restart or hold down the option/alt key during a restart and select Recovery Volume). Run Disk Utility Verify/Repair and Repair Permissions until you get no errors. Reformat the drive using Disk Utility/Erase Mac OS Extended (Journaled), then click the Option button and select GUID. Then re-install the OS.
OS X Recovery
OS X Recovery (2)
When you reboot, use Setup Assistant to restore your data.

How to show rss from other sites on my site?

how to show rss from other sites on my site?
i'd like to have a window on my site that shows rss from
another site
(their content in a window on my site)
thanks
lenny

What version of DW do you have. The later versions have RSS
script generators (I believe) for consuming feeds. Otherwise, you
can use 3rd party sites to generate the code, or you can use a
server side scripting language to consume the feeds.

HOW TO USE CLIPS FROM A DVD???

HOW TO USE CLIPS FROM A DVD???
i know this may be a stupid and obvious question but i can't seem to figure it out.
these are not copyrited dvds... mostly home movies and old home movies put onto dvd.
thank you... much appreciated.

Studio X has given one suggestion.
MPEG Streamclip is another:-
http://www.squared5.com/
It is free but your computer may not have the QT MPEG 2 Playback Component which costs $20 from Apple as a download.
If you have access to an Analogue-DV converter you can use that. Also a DV camcorder which has Analogue IN.
If you have Final Cut Pro installed, you will have the QT component.
Message was edited by: Ian R. Brown

Is there a way to access object from other schema?

1. Is there a way to access object from other schema
Without using synonym/public synonym without prefixing schema owner?
2. If you do not see any object in all_objects by same name owned by connected user or public, can there still be objects hidden from this view? for instance synonyms created by SYSTEM
TIA for help

Well, you missed something somewhere. If there is no
ALTER SESSION SET CURRENT_SCHEMA=whoeverthen there must be either public synonym for the object as this shows:
SQL> CREATE USER a identified by a;
User created.
SQL> GRANT CREATE SESSION to a;
Grant succeeded.
SQL> CREATE USER b identified by b;
User created.
SQL> GRANT CREATE SESSION, CREATE PROCEDURE, CREATE PUBLIC SYNONYM to b;
Grant succeeded.
SQL> connect b/b
Connected.
SQL> CREATE PACKAGE test AS
2     PROCEDURE testit;
3 END;
4 /
Package created.
SQL> CREATE PACKAGE BODY test AS
2 PROCEDURE testit IS
3 BEGIN
4     NULL;
5 END;
6 END;
7 /
Package body created.
SQL> connect a/a
Connected.
SQL> desc b.test
ERROR:
ORA-04043: object b.test does not exist
SQL> connect b/b
Connected.
SQL> GRANT EXECUTE ON test TO a;
Grant succeeded.
SQL> connect a/a
Connected.
SQL> desc b.test;
PROCEDURE TESTIT
SQL> desc test;
ERROR:
ORA-04043: object test does not exist
SQL> connect b/b
Connected.
SQL> CREATE PUBLIC SYNONYM test FOR TEST;
Synonym created.
SQL> connect a/a
Connected.
SQL> desc test
PROCEDURE TESTITAnother possibility without public synonyms is that crv had granted the other user privileges on some object, and the other user creates a private synonym for that. When crv granted privileges on a different object with the same name, the private synonym became valid again. Something like:
SQL> connect /
Connected.
SQL> drop public synonym test;
Synonym dropped.
SQL> GRANT CREATE SYNONYM TO a;
Grant succeeded.
SQL> connect a/a
Connected.
SQL> desc test;
ERROR:
ORA-04043: object test does not exist
SQL> desc b.test
PROCEDURE TESTIT
SQL> CREATE SYNONYM test FOR b.test;
Synonym created.
SQL> desc test;
PROCEDURE TESTIT
SQL> connect b/b
Connected.
SQL> REVOKE EXECUTE ON test FROM a;
Revoke succeeded.
SQL> connect a/a
Connected.
SQL> desc test;
ERROR:
ORA-04043: object "B"."TEST" does not exist
SQL> desc b.test
ERROR:
ORA-04043: object b.test does not exist
SQL> connect b/b
Connected.
SQL> DROP PACKAGE test;
Package dropped.
SQL> CREATE FUNCTION test (p_num IN NUMBER) RETURN NUMBER AS
2 BEGIN
3     RETURN p_num * 10;
4 END;
5 /
Function created.
SQL> GRANT EXECUTE ON test TO a;
Grant succeeded.
SQL> connect a/a
Connected.
SQL> desc test;
FUNCTION test RETURNS NUMBER
Argument Name                  Type                    In/Out Default?
P_NUM                          NUMBER                  INSo, I would go looking for the synonyms.
TTFN
John

Does anyone know how to use vlookup from a pop up menu to retrieve another pop up menu?

Does anyone know how to use vlookup from a pop up menu to retrieve another pop up menu?

BM,
Pop-Up menu format is not dynamic. It is created in the Cells Inspector and can't be modified contingent upon the state of other cells.
You could program a table to list the options available for the previous selection, but it wouldn't be in the form of a Pop-Up.
Jerry

How to upload contacts from other phone to iPhone

how to upload contacts from other smart phone which are saved on my mac to new iPhone

SFalconi wrote:
kaebfly wrote:
Not sure. Haven't checked but maybe VZW will post another "Getting Ready" guide for the 4s like they did for the 4. You can also check the App store via iTunes to see if the current app works for the iPhone 4s. I personally didn't use backup assistant...I never liked how it worked with my other devices (always mixed things up so contacts might have multiple listings instead of one and would place the mobile number as a home number and vice versa). iTunes syncing was quick and easy. I was coming from a BlackBerry when I got my iPhone though so I'm not sure if that's an option for the Voyager.
If you do some searching on the VZW site, or even Google, you can still find those getting ready guides. All the same info would apply, I'd think.
I know the info for the iPhone 4 is still available...but not sure if everything will be the same. Since iOS 5 will make it where you don't have to connect the iPhone to a computer at all there may be a way to do it without that step (which is necessary with iOS 4 if you want to use iTunes to sync contacts). You might be able to get your contacts on your computer from the Voyager and then sync them to the iPhone through the Cloud. Or...it might just be exactly the same as the current iPhone. That's why I was saying maybe they'll post another guide for the 4s. There might even be an owners manual PDF for the 4s already on the apple site. Not sure but if there is then some info would also be available there.

How to use Vector or other ArrayList etc to store my JTree??

How to use Vector or other ArrayList etc to store my JTree??
Dear friends,
I have following I posted before, but not get satisfactory answer, so I modify and repost again here.
I have following code can add classes and students in the JTree,
in class Computer Science, it has student Bill Brien,
in Math, no,
Then I I add Student Nancy, Laura, Peter into Computer Science Class,
add AAAA, BBB, CCC into Math class,
I create a new class called Chemistry, then I add DDD int Chemistry;
so this JTree is dynamically changed,
[1]. How can I dynamically save my current JTree with all above tree structure and its nodes in a Vector or ArrayList(not sure which one is best)??
see code below:
import java.awt.BorderLayout;
import java.awt.Container;
import java.awt.event.ActionEvent;
import java.awt.event.ActionListener;
import javax.swing.JButton;
import javax.swing.JFrame;
import javax.swing.JOptionPane;
import javax.swing.JPanel;
import javax.swing.JScrollPane;
import javax.swing.JTree;
import javax.swing.tree.DefaultMutableTreeNode;
import javax.swing.tree.DefaultTreeModel;
public class ModelJTreeTest extends JFrame {
private JTree tree;
private DefaultTreeModel model;
private DefaultMutableTreeNode rootNode;
public ModelJTreeTest() {
    DefaultMutableTreeNode philosophersNode = getPhilosopherTree();
    model = new DefaultTreeModel(philosophersNode);
    tree = new JTree(model);
    JButton addButton = new JButton("Add Class/Students");
    addButton.addActionListener(new ActionListener() {
      public void actionPerformed(ActionEvent event) {
        addPhilosopher();
    JButton removeButton = new JButton("Remove Selected Class/Students");
    removeButton.addActionListener(new ActionListener() {
      public void actionPerformed(ActionEvent event) {
        removeSelectedPhilosopher();
    JPanel inputPanel = new JPanel();
    inputPanel.add(addButton);
    inputPanel.add(removeButton);
    Container container = getContentPane();
    container.add(new JScrollPane(tree), BorderLayout.CENTER);
    container.add(inputPanel, BorderLayout.NORTH);
    setDefaultCloseOperation(EXIT_ON_CLOSE);
    setSize(400, 300);
    setVisible(true);
private void addPhilosopher() {
    DefaultMutableTreeNode parent = getSelectedNode();
    if (parent == null) {
      JOptionPane.showMessageDialog(ModelJTreeTest.this, "Select Class", "Error",
          JOptionPane.ERROR_MESSAGE);
      return;
    String name = JOptionPane.showInputDialog(ModelJTreeTest.this, "Add Class/Students:");
    model.insertNodeInto(new DefaultMutableTreeNode(name), parent, parent.getChildCount());
private void removeSelectedPhilosopher() {
    DefaultMutableTreeNode selectedNode = getSelectedNode();
    if (selectedNode != null)
      model.removeNodeFromParent(selectedNode);
private DefaultMutableTreeNode getSelectedNode() {
    return (DefaultMutableTreeNode) tree.getLastSelectedPathComponent();
private DefaultMutableTreeNode getPhilosopherTree() {
    DefaultMutableTreeNode rootNode = new DefaultMutableTreeNode("Students");
    DefaultMutableTreeNode ancient = new DefaultMutableTreeNode("Computer Science");
    rootNode.add(ancient);
    ancient.add(new DefaultMutableTreeNode("Bill Brian"));
    DefaultMutableTreeNode math = new DefaultMutableTreeNode("Maths");
    rootNode.add(math);
    DefaultMutableTreeNode physics = new DefaultMutableTreeNode("Physics");
    rootNode.add(physics);
    return rootNode;
public static void main(String args[]) {
    new ModelJTreeTest();
}the actual Tree dynamically created somehow looks like following:
                         |            1.Peter
                         |---CS---    2. Nancy
                         |            3. Laura
                         |            4.Brian
                         |
Root(University): -------|---Math- 1.AAA
                         |            2.BBB
                         |            3.CCC
                         |
                         |
                         |---Chemistry- 1. DDDThanks a lot
Good weekends

you can't directly store a tree in a list.Ummm... Just to be contrary... Yes you CAN store a tree in a table.... In fact that's how the windows file system works.
Having said that... you would be well advised to investigate tree data-structures before resorting to flattening a tree into a list.
So... Do you have a specific requirement to produce a List? Your umming-and-erring about Vector vs ArrayList makes it sound like you're still at the stage of choosing a datastructure.
Cheers. Keith.

How to copy objects from Pages (5.5.1) and paste it into Photoshop as a vector smart object with high resolution?

I recently have bought a new Macbook Pro (Version 10.10.1) with the OS X Yosemite. The computer comes with the new Pages (version 5.5.1).
Here is the problem: I like to create artwork using the shapes on Pages. Previously, on my old mac, I used Pages 4.3 to create objects, which I would copy then paste to Photoshop and it would become a vector smart object. However, in the new Pages (version 5.5.1), when I copy objects, they would appear on Photoshop as instead, a layer and it would not be in full resolution.
Also, I know there is nothing wrong with the Pages file itself because I have converted the document to PDF form and it is high resolution when inserted into Photoshop that way.
Does anyone know how I can copy individual objects from Pages (5.5.1) and paste it into Photoshop as a vector smart object with high resolution as I have done before?
Thanks!

ghotiz wrote:
copy the image and have it in a high-quality PNG format that does not include the background from the Pages document.
Oh, well if you don't actually need vector objects then it looks like this is possible. As I said earlier, Pages is putting a PNG on the clipboard. I tested it and it does paste into Photoshop as a transparent layer, because I can see the transparent background of the pasted PNG graphic if I either turn off all layers behind it in Photoshop, or if I start a new Photoshop document to paste into but make sure I choose Transparent for the Background Contents in the New Document dialog.

How to use objects as a message type in WSDL?

How can I use object as a type for the message in WSDL?
For example, I want to achieve something like this:
<message name="DBConnection">
<part name="conn" type="???"/>
</message>
In the above example, for any operation getConnection(), the return type would be an object of the type Connection.
Any suggestions ?
Thanks,
Dhaval

Hi,
Listed below is the step by step intructions to configure the Nokia device as a modem to a mac.
Steps:
Connecting your Mac to the internet is convenient and easy with your a compatible Nokia S60 device. You'll need a Nokia S60 device that supports a 2G or 3G data connection (such as GPRS or HSDPA), a compatible Mac (with the latest OS X), a USB cable for your Nokia device or a Bluetooth-enabled Mac, and a network subscription with your mobile service provider.
To set up your device you'll need to know your operator's Access Point Name (APN) and have the packet data service enabled. For help with this please contact your operator.
In Settings select and open Connection >Select and open Packet data > Select and open Access point >Type in your operator's Access Point Name
Exit Settings. Your device is now ready to be used as a modem for your Mac!
Bluetooth Connection: Pairing between Mac and Device using bluetooth, follow the instruction from here: http://europe.nokia.com/get-support-and-software/download-software/device-as-a-modem/connect-to-your...
Note: Preferred mode is USB as it much faster than Bluetooth.
Connect the device and then go to System preferences- >Network- >Select Device (Nokia XXX)
Click on Advanced Tab > Modem tab
- Vendor : Nokia
-Model:GPRS (GSM/3G)
-Telephone Number: *99***1# (contact your operator to get this settings)
-APN: airtelgprs.com (contact your operator to get this settings)
CID: 1
Once connected it will be highlighted in green.
Hopefully this helps.
Cheers
Sandy
Message Edited by sandy2410 on 30-Mar-2009 04:52 AM
Helpful information, then dont forget to hit the kudos star :-) Or say it accepted solution and thanks

How to pass Objects from Java App to JavaFX Application

Hello,
New to the JavaFX. I have a Java Swing Application. I am trying to use the TreeViewer in JavaFX since it seems to be a bit better to use and less confusing.
Any help is appreciated.
Thanks
I have my Java app calling my treeviewer JavaFX as
-- Java Application --
public class EPMFrame extends JFrame {
Customer _custObj
private void categoryAction(ActionEvent e)   // method called by Toolbar
        ocsCategoryViewer ocsFX;    //javaFX treeviewer
        ocsFX = new ocsCategoryViewer();    // need to pass in the Customer Object to this Not seeing how to do it.
                                              // tried ocsFX = new ocsCategoryViewer(_custObj) ;    nothing happened even when set this as a string with a value
public class ocsCategoryViewer extends Application {
String _customer;
@Override
    public void start(Stage primaryStage) {
     TreeView <String> ocsTree;
     TreeItem <String> root , subcat;
TreeItem <String> root = new TreeItem <String> ("/");
        root.setExpanded(true);
         ocsTree = new TreeView <String> (root);
         buildTree();     // this uses the Customer Object.
        StackPane stkp_root = new StackPane();
        stkp_root.getChildren().add(btn);
        stkp_root.getChildren().add(ocsTree);
        Scene scene = new Scene(stkp_root, 300, 250);
        primaryStage.setTitle("Tree Category Viewer");
        primaryStage.setScene(scene);
        primaryStage.show();
    public static void main(String[] args) {
        _customer = args[0];      // temporarily trying to pass in string.
        launch(args);

JavaFX and Swing integration is documented by Oracle - make sure you understand that before doing further development.
What are you really trying to do? The answer to your question depends on the approach you are taking (which I can't really work out from your question). You will be doing one of:
1. Run your Swing application and your JavaFX application as different processes and communicate between them.
This is the case if you have both a Swing application with a main which you launch (e.g. java MySwingApp) and JavaFX application which extends application which you launch independently (e.g. java MyJavaFXApp).
You will need to do something like open a client/server network socket between the applications and send the data between them.
2. Run a Swing application with embedded JavaFX components.
So you just run java MySwingApp.
You use a JFXPanel, which is "a component to embed JavaFX content into Swing applications."
3. Run a Java application with embedded Swing components.
So you just run java MyJavaFXApp.
You use a SwingNode, which is "used to embed a Swing content into a JavaFX application".
My recommendation is:
a. Don't use approach number one and have separate apps written in Swing and Java - that would be pretty complicated and unwarranted for almost all applications.
b. Don't mix the two toolkits unless you really need to. An example of a real need is that you have a huge swing app based upon the NetBeans platform and you want to embed a couple of JavaFX graphs in there. But if your application is only pretty small (e.g., it took less than a month to write), just choose one toolkit or the other and implement your application entirely in that toolkit. If your entire application is in Swing and you are just using JavaFX because you think its TreeView is easier to program, don't do that; either learn how to use Swing's tree control and use that or rewrite your entire application in JavaFX. Reasons for my suggestion are listed here: JavaFX Tip 9: Do Not Mix Swing / JavaFX
c. If you do need to mix the two toolkits, the answer of which approach to use will be obvious. If you have a huge Swing app and want to embed one or two JavaFX components in it, then use JFXPanel. If you have a huge JavaFX app and want to embed one or two Swing components in it, use a SwingNode. Once you do start mixing the two toolkits be very careful about thread processing, which you are almost certain screw up at least during development, no matter how an experienced a developer you are. Also sharing the data between the Swing and JavaFX components will be trivial as you are now running everything in the same application within the virtual machine and it is all just Java so you can just pass data around as parameters to constructors and method calls, the same way you usually do in a Java program, you can even use static classes and data references to share data but usually a dependency injection framework is better if you are going to do that - personally I'd just stick to simply passing data through method calls.

How to use objects from other SWCs in my BPM Integration Scenario

Similar Messages

Maybe you are looking for