How can CRM trigger event of R/3

Hello Folks,
My requireemnt I need to run a workflow in R/3 which will be triggered by CRM.
Can you give me a breif how we link CRM with R/3.
Is it only with RFC.
Or can we dirctly trigger a event of R/3 from CRM.
Please let me know the details.
please reply keeping in mind, I am new to CRM.
Thanks
Minal

Hi,
In SM59 you have to do the configuration for r3 and crm interface.
Refer this [article|https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/84dd0c97-0901-0010-4ab2-9849fba57e31].
Regards,
Surjith

Similar Messages

How can I trigger an onchange event for hidden or never displayed item

hi -- I have an item that I don't want displayed on my page -- more info than the user wants or needs; call it B. It needs to be
set by an onchange event from a visible item (A); then, the change of B triggers on onchange to set another item (visible) -- C.
When B is visible on the page, it all works. If I make it hidden or conditionally never displayed, it doesn't work. From the looks of
it, B never gets changed.
How can I trigger this onchange event (from B to set C) with B not visible?
Thanks,
Carol

hi Varad -- Probably more info than you want... but here's the whole chain of events.
Hope it answers your question.
C
**** 1
In A's html form element attributes (simplified; I took out the irrelevant call to jsLookupValue that sets another item).
onchange='jsLookupValue($v("P142_SITE_ID"),"site_id","P142_OBJECTTYPE_ID","objecttype_id","hdb_site_syn");'
**** 2
jsLookupValue is the following.
The statement that actually sets the value of B is: $s(dest_item_name, jsonobj.row[0].RETURN_VAL);
function jsLookupValue(source_item_value, source_column_name, dest_item_name, dest_column_name, lookup_table_name){
// Continue only if there are valid values
if (valueOf(source_column_name)&&valueOf(dest_item_name)&&valueOf(dest_column_name)&&valueOf(lookup_table_name)){
//Check to see if the source_item_value is null (either all spaces or empty
//If it is, set the dest item to null, but only if it's not already --
//otherwise we get into a loop.
source_item_value = trim(source_item_value);
dest_item_value = trim($v(dest_item_name));
if (source_item_value.length==0) {
if (dest_item_value.length != 0) {
$s(dest_item_name, null);
}else{
//This is the AJAX call to the Application Process from step 1
ajaxRequest = new htmldb_Get(null,&APP_ID.,'APPLICATION_PROCESS=LOOKUP_VALUE',0);
//Here we are adding that x01 parameter we use in the app process with the value of the objecttype_name field
ajaxRequest.addParam('x01', source_item_value);
ajaxRequest.addParam('x02', source_column_name);
ajaxRequest.addParam('x03', dest_item_name);
ajaxRequest.addParam('x04', dest_column_name);
ajaxRequest.addParam('x05', lookup_table_name);
//Now do the actual AJAX call and put the result in ajaxResponse
ajaxResponse = ajaxRequest.get();
//Check if there is a response
if (ajaxResponse) {
//We need to format the JSON return string and put it in a JSON object
// the formatting is done by a function in the external JSON library
// the jsonobj can be used to retrieve the data returned by the App process
var jsonobj= ajaxResponse.parseJSON();
// And finally, we set the DNAME item with the value of the jsonobj.DNAME
// an array was created in the object with the name row, so that is why you have to include row[0] to retrieve the data
if (jsonobj.row[0].RETURN_VAL != $v(dest_item_name)) {
$s(dest_item_name, jsonobj.row[0].RETURN_VAL);
}else{
} //not setting
}else{
alert('No response from app process');
} //no response
} //no source item value
} //no bad nulls
} //function
**** 3
I won't bore you with app process LOOKUP_VALUE. It just builds an sql query that gets the value for B, aliased to RETURN_VAL.

How can i trigger workflow when particular event happens in webdynpro

how can i trigger workflow when particular event happens in webdynpro

hi,
To trigger workflow , use the fm : 'SAP_WAPI_START_WORKFLOW'
Refer this thread for similar requirment : Workflow in WebDynpro
Blog : http://www.sdn.sap.com/irj/scn/weblogs;jsessionid=(J2EE3417500)ID1564403950DB00699140435432809306End?blog=/pub/wlg/2778

How can i trigger the workflow from REPORT

hi,
my requirement is, whenever Z... Report Is generated there is Icon called print. the write the code for printing icon. if printing Icon fails the workflow will be trigger.
how can i trigger this from report. and i send attachent of report with mail to next person to sap inbox.
pls let me know.
pls give any documentation if you have.
thanks & Regards
Sankar.

Hi,
Workflow container
swc_container        lt_container.
swc_create_container lt_container.
swc_set_table lt_container '<cont_name>' lit_int_tab.
CALL FUNCTION 'SWE_EVENT_CREATE'
    EXPORTING
      objtype           = lc_objtyp
      objkey            = lv_objkey
      event             = lc_event_name
    IMPORTING
      event_id          = lv_eventid
    TABLES
      event_container   = lt_container
    EXCEPTIONS
      objtype_not_found = 1
      OTHERS            = 2.
IF sy-subrc <> 0.
    yv_err_flg = gc_true.
    EXIT.
ENDIF.
Rgds,
Prakash

How can I view my photos in "Events" like in iPhoto? How can I create events? I have 55,000 photos and 1700 events so the only way I can possibly manage my photos is using events that are one slide in size.

I have 55,000 images organized into about 1700 events. The only reasonable way to view my library is using events in iPhoto where each event has one image That still leaves 1700 images to sort through but that is a lot easier than 55,000 images. In the side bar is a folder with "iPhoto Events" but those views still show all of the slides. How can I create events and view my photos as events as in iPhoto? Events are critical for large libraries and has been my primary way to sort images.
Thanks!

I had a problem a couple of months ago when iPhotos suddenly rearranged the order of my Events (Why won't iPhoto let me arrange my photos?) . I was told "Use albums not events - events are not a good way to organize - albums and folder are designed for organisation and are very flexible".
Haha! I should have paid attention and read between the lines! My iPhotos were highly organised groupings - not according to date but the way I wanted them - and it was so easy to do! I see now that if I had them all in albums, as per the Apple Apologist suggestion, I wouldn't have this unholy mess I have been left with just to make iPhone & iCloud users happy. I am now going through Photos and making Albums (of what used to be in my Events) ... maybe I'll get this finished before they do another non user friendly update!

How can I remove events from my iPhone. I want to delete all the events from my iPhone.

how can I remove Events from my Photo in iPhone

Connect to computer iTunes and uncheck under Photos > Events then do a sync.

Imported old family video, I seperated different events, how can I save event to put together in a menu like family, vacation, christmas.

Imported old family video, I seperated different events and named each event, how can I save event to put together in a menu like family, vacation, christmas to make a DVD

revdhayes wrote:
I imported 5 1 hour old video in Final Cut Pro X. I spent all day seperating clips with Start and end then naming each clip in properties..
Sorry, but I don't understand what "5 1 hour video" means.
I do understand that you have a lot of clips that you want to group by various subjects, like vacation, etc. That's a perfect job for keywords, which perhaps is what you used when you named them?
If you did use keywords, go to that TL Index and click Tag at the top and then the keyword icon at the bottom. It should give you a list of only clips in that category. Select clip from the menu and it should highlight them. You could then copy and paste them to a new project for export. Repeat as necessary.
If you're going to do a lot of these, I'd suggest doing this from the event browser, applying keywords and then the clips into separate projects. But there are always more than one way to do things, and to each his/her own.
Again, I don't have any idea how long your footage is and whether it is even possible (or desirable) to fit it on to a single DVD. I mentioned iDVD because of its menu and sub menu capabilities. You will need another app like Compressor to do the chapter makers (unless Apple updates FCP before you finish your project and adds that capability. That would be nice,)
Good luck.
Russ

HT4759 How can make the events listed in my chalenda become automatically a reminder in the reminder?:

How can make the events listed in my chalenda become automatically a reminder in the reminder?:

Welcome to the Apple community.
Calendar and reminders are two different and separate apps, you cannot transfer information between the two of them.

How can we trigger an IDOC based on Orders creation.

Hiii...experts,
After searching alot in SDN i am taking this very commonly asked to experts in the hope of a better understanding.
If i create a sales order means.. i want to trigger a IDOC based on certain Condition on ORDER data .. how can we do this..
when ever i'm creating a sales order it should be automatically trigger a IDOC , Because when ever sales ordre was created in R/3 system it should be transferred to some destination...
And pls tell me about the reports that does the job of collecting required data from the sales order and converts it into a IDOC.
so, how can we trigger an IDOC based on Orders creation..
pls help.
Ram.

Use IDOC_OUTPUT_ORDERS for creating IDOC
you need to maintain condition records & output type
<REMOVED BY MODERATOR>
Edited by: Alvaro Tejada Galindo on Apr 10, 2008 4:18 PM

How can I count events during a given time with 2 counters (6025 E)

Hi, How can I count events during a given time (1 sec for example) with 2 counters:
what is the best way?
how should i configurate both counter?
i have done the 1st counter in ev_counter with the gate being the output of the 2nd; and how can i say to the 2nd to trig the first after 1 sec counting? (trig at start and at end) what are the functoins calls in NIDAQ. i am using Visual C++

Greetings,
When you perform event counting a gate signal can be added such that if a low signal occurs on the gate, then the counter will pause. When a high signal is seen, the counter will continue counting edges. When you install the NI-DAQ driver you should have installed the examples for Visual C++. The counter examples are found in \Program Files\National Instruments\NI-DAQ\Examples\VisualC\Ctr. Take a look at STCeventCount.C. Be sure to only use STC examples with your hardware. The E-series boards contain the DAQ-STC chip.
Now, all you need is a gate signal with a width (high time) of 1 second. You could use an external frequency or pulse generator to do this. Or, you could just use the second counter found on your PCI-6025E board. In this
case you could configure the second counter to generate a single pulse. Take a look at the STCgenerateSinglePulse.C example. As long as the pulse is in a high state for one second you can use it to gate (or time) your counting of events.
Regards,
Justin Britten
Applications Engineer
National Instruments

How can i trigger two 5102 PCMCIA by software synchron

I want to use a mobile measurementsystem with a laptop and two NI5102-PCMCIA. How can i trigger both cards syncron without loosing a channel. how can i trigger both cards syncron by software?

Sounds like you are interested in triggering two DAQCard-5102. The triggering capabilities of this card are outlined in Chapter 4 of the DAQScope 5102 User Manual:
http://digital.ni.com/manuals.nsf/websearch/3F29D7C792CBF5478625665E006358EA?OpenDocument&node=132100_US
One thing to point out is that RTSI lines are not available in the PCMCIA version of the 5102.
If you have any further questions you can always request support from National Instruments at ni.com/ask
Regards,
Russell Blake
Applications Engineering
National Instruments
Engineering Team Leader
G Systems, www.gsystems.com
Certified LabVIEW Architect
Certified Professional Instructor

How can we impliment event pooling table in 11g

how can we use event pooling table in obiee11g for the cache seeding .could you please share knowledge.
Regards
bethamsetty

Hi,
Refer-
http://docs.oracle.com/cd/E14571_01/bi.1111/e10541/querycaching.htm
see 7.8 section
http://obieehome.blogspot.in/2012/07/event-polling-in-obiee-11g.html
Hope this helped/ answered
Regards
MuRam

How can launch an event in javascript?

Hi, i´m doing an app in jsp, but i´m using a framework in javascript, css... my problem is... how can launch an event in javascript?
I have a menu bar in javascript, and i want launch an event in each option, how?
Thanks,

Hi Victor,
well, onMouseUp("blablup");
I do not finally get your problem - do you want to send an event? So just add it to the URL and send the URL -or do you want to excut the form? Why then not add the "event" to a hiden field in the form and execut that form then?
In the handler you can ask for the details of the hidden field.
I think it is not exactly what you are fter - but it could be that this is anyay a solution.
Regards,
Oliver

How can we trigger the BAdI MD_PIR_FLEX_CONS in a MTS strategy

Hi All!
We have 5 Plants: 4 commercial plants and 1 production plant.
The sales orders are created in the commercial plants with a Make-to-order with consumption Requirements type; (Individual customer stock is an issue of the client).
Planned independent requirements are entered at finished product level with Consumption indicator for planning requirements 4 - Flexible Consumption for Different MRP Elements (BAdI); we create the purchase order (L - Subcontracting) for the finished product based on the PIR.
We need to do the consumption and reduction of planned independent requirements based on the purchase orders creation or in the Goods Receipt for the Outbound Delivery.
We implemented the BAdI MD_PIR_FLEX_CONS but the BAdI isnu2019t trigger for Planning strategy 10 or 40 but. The BAdi is trigger only when Requirements class of the Requirements type of independent requirements as value 2 (Consume planning w/o assembly) in the Consumption indicator and value 3 (Single-item planning) in the Planning Indicator.
How can we trigger the BAdI in a MTS strategy u2013 The BAdI documentation doesnu2019t mention that can only be used in MTO strategy?
Thanks.
Regards.
Adelino

Hello Adelino
Strategy 10 is a special business case without consumption and only with the PIR reduction during the delivery (goods issue). You can see in customizing OPPS that both requirements KSL and LFS are set with "No consumption with customer requirements". In this case, BAdI MD_PIR_FLEX_CONS is not called.
The BAdI can be used with strategy 40, so please make sure that the consumption indicator of the PIR is set to '4 - Flexible Consumption for Different MRP Elements (BAdI)'.
BR
Caetano

How can I trigger an event from an ABAP Program

Hi everyone,
I have a requirement, where I have to create an ABAP program, that has to execute (trigger) an event which belongs to a Process Chain. when I run the program, the Process Chain has to run.
So, how can I do it?
Thanks for your help, Federico

HI ,
The program can call function module BP_EVENT_RAISE to raise the event. you can create vent in sm64 and sm62 .There you give the parameter of the event same as what you will define in the event of start variant of your process chian ..
Regards,
shikha

How can CRM trigger event of R/3

Similar Messages

Maybe you are looking for