How can I amplify audio signals from wav file?(gain control)
I want to develop an audio equalizer using labview. How can I control the gain of the audio signal (amplify) using labview vis.
If your audio signal is in form of a numeric array or a waveform cluster, to amplify it, just muliply it with a numeric value
like in this VI
Regards
Dev
Attachments:
Amp.vi 51 KB
Similar Messages
-
How can I Route audio signal from DIGI002 via SPDIF into Express or Pro
i have tried many things and cant seem to get it to work..
trying to route output from DIGI002 SPDIF into Logic Express 7.1
can it be done in Express or do i need PRO?
Using PTLE7.0
OSX 10.4.3
Logic Express 7.1
Core Audio Driver 7.0
Of anyone can offer a fix for thisi'll be upgarding lo Logic Pro and ***** off Protools for good.. logic makes much better use of the CPU than PT ever did.. its amazing what you can get out of a laptop running Logic.Model Name: MacBook Pro
Model Identifier: MacBookPro4,1
Processor Name: Intel Core 2 Duo
Processor Speed: 2.5 GHz
Number Of Processors: 1
Total Number Of Cores: 2
L2 Cache: 6 MB
Memory: 4 GB
Bus Speed: 800 MHz
Boot ROM Version: MBP41.00C1.B00
SMC Version (system): 1.27f3
Serial Number (system): W8*******YJY
Hardware UUID: ***************
Sudden Motion Sensor:
State: Enabled
<Serial Number Edited by Host> -
Hello, How can I save audios rcvd from whatsup in Iphone 5 ? Thanks
Hello,
How can I save audios rcvd from whatsup in Iphone 5 ?
ThanksYou might want to start with reading the iPhone user guide. Basic processes like synching are covered: http://manuals.info.apple.com/MANUALS/1000/MA1565/en_US/iphone_user_guide.pdf
In short, you must use iTunes to synch photos. You can also get more information in this knowledgeable article: iTunes: Syncing photos - Apple Support -
How can I script moving paths from one file to another?
Hello. I have 1 image with various color correction layers. The other is the exact same size but only contains paths. How can I script moving paths from one file to another? Thanks, in advance, for any help you can offer. Thanks!
Thanks! This one actually worked for me. Thanks for your help.
http://forums.adobe.com/message/3305389#3305389 -
How can I remove one page from adobe file
How can I remove one page from adobe file, when I try to remove the page a dialgue box say "some pages are being used, so they can not be ereased"?
Tools>Pages>Delete pages
-
How can I tell if signals from two devices are truly synchronised?
Hi there,
How does one check that signals from two devices (two separate devices in a single X-series chassis) that should be synchronised actually are? I am using a PXIe6361 and PXIe4331 on a PXIe-1073, with Labview 2001 SP1 64-bit. All devices are using the Sample Clock from the 4331 device, and an AI Start Trigger, so they should be synchronised.
I thought that writing the signal data to file and checking the time stamp for each column of data would be the most accurate, but I have been told that timestamps are software created and therefore don't reflect the actual time that the signals were acquired by the hardware. When I do this, the timestamps vary by up to 150ms which is larger than I expected.
If I set the x-axis of the waveform graphs (on the GUI) to "Time" then it appears that the first data sample is taken at different times for the two plots (one plot per device).
If I set the x-axis of the waveform graphs (on the GUI) to "Ignore time stamp" (so that the x-axis just starts from 0 rather than a date-time) then the first data point occurs at "0" for both graphs. However, I'm not sure that this reflects the actual alignment of the signal.
What is the best way to check if signals collected on different devices in the same chassis are actually synchronised?
Thanks,
Claire.Hi Lynn,
Thanks for your help and for sending the demo.
I understand the concept of how the signals will look if they're not synchronised and your demo shows that nicely. I guess I have been perplexed by someone else telling me that the timestamps in the output file (and following from that I assume timestamps on a waveform graph) do not give an indication of whether signals are synchronised. The reason they gave for this was that the timestamps are manufactured by the software, not the DAQ hardware. They suggested that I put the setting "ignore waveform timestamps" on my waveform graphs, and then check that both signals come in at the same time (i.e. both start at zero), but I'm not convinced about this.
When I use an analog trigger, neither the timestamps in my output file or on the two waveform graphs are synchronised. If I don't use the trigger, then there is far less disparity in the timestamps in the output file. I've attached two output files here, and my VI.
This is my first attempt to synchronise a voltage module and a strain gauge module on an X-series chassis, so I want to make sure that I'm achieving the best synchronisation that I can, and the difference in behaviour with and without the trigger worries me.
Thanks,
Claire.
Attachments:
without trigger.txt 5 KB
with trigger.txt 6 KB
Multi-Device Synch-Analog Input-Finite Acq-Analog Start_Claire_wDigitalin_12June2012 PTbridge.vi 196 KB -
How can I use a photo from my files as a screen saver?
I have an LG monitor about 10" high and 16" wide. How can I send a photo from my Adobe files to my desktop as a screen saver. Because of the odd dimensions of this monitor, the one I have as a screensaver now does not show the entire photo. I need instructions how to choose one of my photos, send it to the monitor as a screen saver, and make it the correct size to show the entire photo.
You'll need to download the song from your cd to your my music folder, then open Itunes files add files or folder to the library then you find your song from your my music folder. Then you will have to create the ringtone:
http://http://www.ehow.com/how_2160460_custom-iphone-ringtones-free.html
follow the instruction to create then sync the ringtones. -
How can I generate IDOC(WPUUMS) from XML file in POSDM or in SAP Retail
Hallo Retail expert,
I have following scenario,
I have Retail Store who send me their daily sales report through Wincor Nixdorf Point of sale. There i am using standard POSLOG2 to SEEBURGER(its a middleware which act as Converter) xml format and then i post that data first in POSDM and then with BAPI i transfer or book that data to SAP Retail.
Above is the one scenario which is working.
This is the Second scenario.......
I have some external Retail store, they dont have Wincor Nixdorf POS, so they send me their Sales Report through SEEBURGER(its a middle Hardware which act as Converter) and SEEBURGER Convert that Sales data to XML format. My question is....
How can i upload or Convert a XML File into IDOC (WPUUMS)in SAP or in POSDM?
any new suggestion are welcome.
Thank you all in advance.
regards,
NielHi,
1. To get the required XML Schema, use transaction code WE60 to go to the IDoc documentation -> enter the IDoc type you want to use (WPUUMS01). Flag control and data record. Then display the XSD by choosing Documentation -> XML Schema from the menue bar. Now you can donwload the XSD for usage in Seeburger.
2. Create your mapping from the POS format into the IDoc XML format in Seeburger.
3. Create an XML File Port in ERP or POS DM using transaction code WE21.
3. To inbound the XML file from Seeburger into POS DM or SAP Retail Seeburger should trigger the function module EDI_DATA_INCOMING. Parameters for this FM are the Pathname to the XML file and the Portname you just created. Based on the port name the FM can derive the port type xml and the data will be handled as XML data.
Regards Carsten -
How can i read pwm signals from a rc receiver using myrio??
Hello, i bound a transmitter (rc remote control) with a receiver which i connected it (the signal's pin) to the digital port on myrio. It showed me a boolean indicator, and it wasn't turning on the whole time even when i moved a cursor on the transmitter. When i put a time delay of 1sec in the code the results started to show true on some positions of the throtlle. Can anyone tell me how can i interpret those result to create signal conditioning and control some motors?? thank u all in advance
This is the point in the phone conversation when the mechanic tells the customer, "Why don't you bring your car in?"
Please upload your code so we can help you figure out what's wrong.
Bill
(Mid-Level minion.)
My support system ensures that I don't look totally incompetent.
Proud to say that I've progressed beyond knowing just enough to be dangerous. I now know enough to know that I have no clue about anything at all. -
How can i get all links from html file ?
I tried some code:
List<string> metas = new List<string>();
string text = "";
string mys = "";
public List<string> LockedThreads(string filename)
HtmlWeb web = new HtmlWeb();
HtmlAgilityPack.HtmlDocument doc = new HtmlAgilityPack.HtmlDocument();
doc.Load(filename, Encoding.UTF8);
var metaTags = doc.DocumentNode.SelectNodes("//meta");
if (metaTags != null)
foreach (var tag in metaTags)
if (tag.Attributes["name"] != null && tag.Attributes["content"] != null)
text = tag.Attributes["name"].Value;
mys = tag.Attributes["content"].Value;
var linksOnPage = from lnks in doc.DocumentNode.Descendants()
where lnks.Name == "a" &&
lnks.Attributes["href"] != null &&
lnks.InnerText.Trim().Length > 0
select new
Url = lnks.Attributes["href"].Value,
Text = lnks.InnerText
foreach (HtmlNode node in doc.DocumentNode
.SelectNodes("//a/@href | //img/@src"))
metas.Add(node.Name);
In the var linksOnPage i'm getting all the links but some of them not only links for example the first item i see:
[0] = { Url = "/", Text = " " }
Then the second item:
[1] = { Url = "http://rotter.net/cgi-bin/forum/dcboard.cgi?az=login", Text = "התחבר" }
Next i want to add another loop or variable that will contain only the links after im src for example:
<img
src="http://mysite.com"
border="0"></a></TD><TD
ALIGN="right"
VALIGN="TOP"
WIDTH="55%">
So to get only http://mysite.com
So in the end i will have two Lists:
First List will contain all links from the html file.
Second List only links that are in img srcOk i'm using regex now and i can get the links i need:
List<string> metas = new List<string>();
List<string> metas1 = new List<string>();
string text = "";
string mys = "";
public List<string> LockedThreads(string filename)
string[] fall = File.ReadAllLines(filename);
foreach (string hh in fall)
if (hh.Contains("http://rotter.net") && hh.Contains("locked")||
hh.Contains("locked_icon_general") ||
hh.Contains("locked_icon_anchor") ||
hh.Contains("icon_anchor") ||
hh.Contains("locked_icon_fire") ||
hh.Contains("locked_icon_sport")||
hh.Contains("locked_icon_camera")||
hh.Contains("locked_icon_movie"))
Regex linkParser = new Regex(@"\b(?:https?://|www\.)\S+\b", RegexOptions.Compiled | RegexOptions.IgnoreCase);
foreach (Match m in linkParser.Matches(hh))
metas.Add(m.Value);
So now in the metas i have in this case two links.
For example the first link is from this block in the file:
The link i got is : http://rotter.net/forum/Images/hot_icon_anchor.gif
And this is the right link from this block but now how do i get the text from this block and how i connect how do i know that this text belong to the link ? I need to add this text from this block to a new List. Before all that i counted on my own lines
and got the text but that's a bad idea.
I need somehow to get: שרשור תשדירי בחירות מרוכז:
To get the text between the ToolTip',' and the second ',' but not from all the html file only in places of this two links i extracted.
<TD ALIGN="RIGHT"
VALIGN="TOP">
<body onmousemove="overhere()">
<a onmouseover="EnterContent('ToolTip','שרשור תשדירי בחירות מרוכז:','<u><span style=color:#000099;>כתב: menahem בתאריך: 03.03.15
שעה: 08:51</span></u><br>1.<br>http://youtu.be/utUaqyiRkJ8<br><br><br>...'); Activate();"
onmouseout="deActivate()"
href="javascript:void(0)">
<img src="http://rotter.net/forum/Images/hot_icon_anchor.gif"
border="0"></a></TD><TD
ALIGN="right"
VALIGN="TOP"
WIDTH="55%">
<FONT CLASS='text15bn'><FONT
FACE="Arial">
<a href="http://rotter.net/cgi-bin/forum/dcboard.cgi?az=read_count&om=187966&forum=scoops1"><b>
<font color="red">שרשור תשדירי בחירות מרוכז:</b>
</a></font></TD> -
How can I remove ReadOnly flag from a file?
Hellow All!
I have read/write access for a file, and after using setReadOnly() method in my program I cannot turn the attribute of the file back.
How can I do that operation in my program?Maybe you can go to the directory and runtime
Runtime.getRuntime().exec("attrib file.txt -r"); //Win32 systems onlyCorrespondingly,
+r adds read only
+h hidden
+s system
-s remove system etc... -
Can I build vst instruments from wave files?
I have a bounce of wave files and would like to use them as vst instruments in Logic. Can I build my own vst instrument somehow?
You can load them into the EXS24.
-
How can we read a column from text file
hai,
the Text file contains :
m1 m2 m4 89
m1 m2 m4 89
m0 m4 m2 90
I need one array for each column
m[0]= m1,m1,m0 (first column from text file)
m[1]= m2,m2,m2 (second column from text file)
m[2]= 89,89,90 (third column from text file)
andvance thanksIf a 2D array is OK (instead of 4 separate arrays), try something like this
import java.io.*;
import java.util.ArrayList;
class FileReadColumns
public static void main(String args[]) throws IOException, FileNotFoundException
String line;
ArrayList lines = new ArrayList();
BufferedReader in = new BufferedReader(new FileReader("data.txt"));
while ((line = in.readLine()) != null) lines.add(line);
String bits[];
bits = lines.get(0).toString().split(" ");
String grid[][] = new String[bits.length][];
for(int i=0;i<grid.length;i++)grid[i] = new String[lines.size()];
for(int i = 0; i < lines.size(); i++)
bits = lines.get(i).toString().split(" ");
for(int ii = 0; ii < bits.length; ii++) grid[ii] = bits[ii];
for(int i = 0; i < grid.length; i++)
for(int ii=0;ii<grid[i].length;ii++)System.out.print(grid[i][ii]+" ");
System.out.println();
System.exit(0); -
How to refer/store a vaue from csv file in control file
Hi,
Consider the following control file script.
Load data
infile 'suv.csv'
append into table mast_equipmnet_test
fields terminated by "," optionally enclosed by '"'
TRAILING NULLCOLS
equipment_id,
sub_vehicle_type,
ebiz_carrier_no expression "(select ebiz_carrier_no from mast_carrier where carrier_id=?)",
licence_no,
equip_type,
ebiz_appown_no,
ebiz_equip_no sequence(1,1)
here is my csv file
CABNO, SUBTYPE CARRIER_ID REG_NO, VEHICLE_TYPE, EBIZ_APPOWN_NO
6954, SUMO, SWAMY, 6954, SUV, 228
9183, SUMO, SWAMY, 9183, SUV, 228
3173, QUALIS, SWAMY, 3173, SUV, 228
In my csv file i have carrier_ids which are string values in 3rd column.
for every carrier_id ,the corresponding ebiz_carrier_no(numeric value) is stored in a master table called "mast_carrier".
While loading the data i need to fetch the ebiz_carrier_no for each carrier_id from mast_carrier table .
but here i got strucked in the where clause of select statement.
I am not able to refer the carrier_id from csv file in where clause.
can any body tell me how to refere a value from csv file in the select statement of control file script.
cheers
RRKSorry..
"EXPRESSION" is not needed..
ebiz_carrier_no "(select ebiz_carrier_no
from mast_carrier
where carrier_id=:ebiz_carrier_no )",
<br>
<br>
"Tested" as
<br>
load data
infile *
into table t truncate
fields terminated by ','
(id,
name "(select ename from emp
where empno = :name)"
begindata
1,7900
2,7902
<br>
QL> select * from t;
ID NAME
1 JAMES
2 FORD -
How can I install audio driver from BootCamp into Windows 7?
After an uneventful installation of Window 7 (64) onto iMac cor 2duo OS X 10.6.7.
NO SOUND.
I have tried to replace the Audio Driver HD through Device Manager: it is not working
a) if I disable the Windows Driver and try to install the Cirrus driver from the BootCamp disc, I am informed that "device already has the optimal driver"
b) if I unistall the WIndows driver, Sound Video Game Controller disappears from Device Manager-so there is no place through which I can install a new driver.
c) If I start from the BootCamp/Driver folder and select Cirrus and Install, I am again getting the answer that the "device already has the optimal driver"
I am frustrated! Please, can you advise how to proceed?You do NOT want to disable unless you are not going to use a device.
You want to rollback or uninstall and get Cirrus driver.
Try Boot Camp (Setup) repair-reinstall - to enable the device.
Maybe you are looking for
-
Smb was working under 10.9.1. Now smb and usning the finder I get "connection failed". Both of my NAS are not out when i am using my mac book pro thru the wifi connection. Is any one else have the same problem?
-
Suddenly extremely slow Time Machine backups on Time Capsule
My Time Machine backups on Time Capsule have been pretty good in the last few months. In the last week or so I am seeing painfully slow backups. It's not the preparing or the finishing phase, it's the backup itself. Data transfer for other apps is fi
-
Can't import photos using USB cable
I have a Canon 5D Mark III and LR 4.3. I normally import photos using a CF card reader. However, I'm on vacation and only have the USB cable that connects the camera to my Macbook Pro. I've used this successfully in the past to import photos, but I'm
-
Hy, My new computer has 3 HDD. C: The first HDD is 32go SSD and is used for Windows 7. D: The second HDD is 512go SSD and is used for programs. E: The third HDD is 1to and is used for Data. When I try to install the Adobe Creative Suite, and I choose
-
Hi - can you retrospectively see the option to migrate photos from iphoto to photo's? If not how do i get my photos from iphoto to show in photos after upgrading? Any help appreciated