How can I conditionally present different pages based upon a promo code?

I am sending out a general mailing to a list of potential clients. I have broken this group into five unique subsets, and each mailing will include a specific (one of five) promo codes. When a user comes to my website, I want to allow then to enter the promo code, and then I will display one of five specific pages that is tailored to their needs. If anything else is entered into the field, a general error page will be displayed. I am using Dreamweaver CS4 and I have created several websites. I have experience using forms. I am assuming that I will need to utilize dynamic pages to accomplish this; if there is an easier way, please let me know. Given that there isn't an easier way, can someone please tell me how to (or where I can find) create and utilize dynamic pages? Omar

Hi Omar,
On a side note, should I close this question and move it to the Development forum? Being new to utilization of forums, I'm not quite certain of the etiquette.
It´s certainly not a matter of "etiquette" ;-) I think you´re right, because posting your question in the regular Dreamweaver Application Development forum instead will have one huge advantage :: over there you´ll address a huge number of fellow developers and hence get help and different suggestions much quicker, whereas in this forum (which is about a former Dreamweaver application development extension which has been discontinued in April 2009) I have regretfully become the only one who still answers stuff.
Cheers,
Günter

Similar Messages

How can we jump to different page in af:showDetailItem within af:showOneTab

Hi,
My requirement is to have multiple tabs in a page (not using the menu1, menu2, or menu3 facet). Each tab is doing different functionality, so each tab could span multiple pages.
I am trying to use af:showOneTab with af:showDetailItem to implement this, but it seems that with af:showOneTab, all tabs are part of the same page, so I am facing a problem. I am hoping that there is an "action" property in the af:showDetailItem component that I can use to go to different page.
For example, I have 2 tabs: Employee, Department.
Employee | Department
When user reaches the first page, we are disclosing Employee tab by default. Within this tab, we are showing all employees in an ADF table with a link to "Create New Employee" which I wire to a new JSFX page. So in this new page, I am copying the same af:showOneTab with 2 af:showDetailItems from the same page.
After we are done with the creation, if user clicks the Employee tab, we should go back to the first JSFX page which shows all employees in ADF table. But it does not do that, it stays in the second page (create new employee page). Then I realize that it's because there is no "action" property in af:showDetailItem.
Can af:showOneTab / af:showDetailItem be used to achieve this? Or is there another tab container component that I should use?
Thanks for the help.

Hi,
this is more a usecase for a template than the use of tabs. Tabs are not made for this. You could use subviews, but then the pages are added at runtime to the parent page
Frank

How can I use two different page orientations in the same document?

I am trying to have both portrait and landscape page orientations in the same document. Pages doesn't seem to like this. Is there a way?

I tried to comment on another thread about this same issue, but the thread was closed.
In the other thread; however, some asked why rotating one pages was necessary, and if they knew then maybe there would be reason to create the function.
Well, I don't know about why anyone else needs it, but for me it's for the papers I have to write for my masters program. The professors like to have the rubric attached to the bottome of the document so they easily grade and keep things organized. They of course give directions on how to easily change the orientation of the last page in Word, but not all of use Word, or even want to use Word. Maybe I need to ditch Pages and go to Word? I'd really hate to do that!
So, come on Apple, let's get this feature added, stat!

How can I add a different web-based email program to use as my default 'mailto:' function?

When I go to Settings -> Applications and click on 'mailto', I see 'Use Yahoo mail, Use Gmail, and Use other...'. I want to use the Go Daddy Workspace Webmail application, which like Yahoo & Gmail, is a web based program, but don't see any way to add that option. The 'Use other...' option is only looking for an executable file and it won't accept a web-based command.

I found an old thread about the same type of issue. I cannot be certain whether it still works or not. Feel free to checkout the thread [https://support.mozilla.org/en-US/questions/917427 here].

How can I open a new window based upon input in an existing window

Hi,
I'm pretty new to LabVIEW and I've run into a slight problem that I having trouble finding information about. My LabVIEW application will present a user with several configuration options. Depending upon the options the user chooses, a new window/panel will need to appear with an entirely different set of options. Is this possible? If so, how?
Thanks,
Al

Hi Al,
you can call subvis in a case structure ("when button is true then call subvi"). In the subvi's properties you have to set "open front panel when called" and "close afterwards" (window appearance settings).
Best regards,
GerdW
CLAD, using 2009SP1 + LV2011SP1 + LV2014SP1 on WinXP+Win7+cRIO
Kudos are welcome

How can I dynamically reference a sheet based upon the contents of a cell

I'm using Numbers to store specifications for various products. Each sheet stores specifications in a standard manner (i.e. same table and cell names) and the sheet is named according to the name of the product.
On another sheet I've got a dropdown list containing the names of the product tabs. I'd like to dynamically pull data for a particular product when it's sheet is selected in the dropdown list by using the dropdown cell in a reference like:
=B1::STC::A4, where B1 is the dropdown list and STC::A4 is the product specification table and cell reference.
When I use this, the B1 reference fails.
Any suggestions would be greatly appreciated.
Thanks.

Amos,
you will have to use the indirect function to convert the string you are creating into a valid reference.
Note: The Sheet names, Table names and cell references must all match exacty.
If the sheets are named "B1", "C1" and "D1" and the popup menu is in the cell A1 and contains the strings:
B1
C1
D1
The table name is "STC"
then you can create a valid reference like this:
= indirect(A1&"::STC::A4")
if the table name were also dynamic and were stored in cell A2 you could create the reference like this:
= indirect(A1&"::"&A2&"::A4")

How can I print mulitple different .ai files onto one page in Illustrator CS6?

How can I print mulitple different .ai files onto one page in Illustrator CS6? I have all of the files organized by Arrange Documents>Tile All in Grid and I would like to print the files in this format so that they can all be seen at once when printed out onto one page.
Some background is that I have 16 different cad drawings that I have converted and edited in illustrator. I'd like to basically make a contact sheet with all 16 drawings so that they can be reviewed on one sheet of paper after printing. But each drawing is in it's own unique file, and I have not figured out how to put them all onto one page for printing.

You can place them (linked) into a new Illustrator file and print from there.
The original files will need pdf compatability.

Redirect to different pages based on user input value

Hello,
Anyone please help.
I am trying to redirect to different pages based on user inputs. I have a form in which I have one text item and a submit button. For example consider text item to be empno; So once the user enters a empno and hits submit button; I need to redirect to different pages based on this job.
For Ex: if user inputs empno whose job is 'ANALYST' then redirect to page 1
if user inputs empno whose job is 'MANAGER' then redirect to page 10
For this scenario. i wrote a pl/sql process for the submit button; but no luck -- its not at all redirecting instead its in the same page. Below is the process.
declare
v_job varchar2(20);
begin
select job into v_job from emp where empno = :P9_EMPNO_R;
if v_job = 'ANALYST' then
OWA_UTIL.REDIRECT_URL('f?p=&APP_ID.:1:&SESSION.::&DEBUG.::', TRUE);
end if;
if v_job = 'MANAGER' then
OWA_UTIL.REDIRECT_URL('f?p=&APP_ID.:10:&SESSION.::&DEBUG.::', TRUE);
end if;
end;Please help. I am using Oracle APEX version 4.2 and database Oracle 11g R2
Thanks,
Orton

orton607 wrote:
Hello,
Anyone please help.
I am trying to redirect to different pages based on user inputs. I have a form in which I have one text item and a submit button. For example consider text item to be empno; So once the user enters a empno and hits submit button; I need to redirect to different pages based on this job.
For Ex: if user inputs empno whose job is 'ANALYST' then redirect to page 1
if user inputs empno whose job is 'MANAGER' then redirect to page 10
For this scenario. i wrote a pl/sql process for the submit button; but no luck -- its not at all redirecting instead its in the same page. Below is the process.
declare
v_job varchar2(20);
begin
select job into v_job from emp where empno = :P9_EMPNO_R;
if v_job = 'ANALYST' then
OWA_UTIL.REDIRECT_URL('f?p=&APP_ID.:1:&SESSION.::&DEBUG.::', TRUE);
end if;
if v_job = 'MANAGER' then
OWA_UTIL.REDIRECT_URL('f?p=&APP_ID.:10:&SESSION.::&DEBUG.::', TRUE);
end if;
end;Please help. I am using Oracle APEX version 4.2 and database Oracle 11g R2
Thanks,
OrtonI have a similar scenario in my application and this is how I handle it.
1. Create a page item on the page, say Px_PAGE_NUM
2. Create a "On Submit - After Computations and Validations" page process to set the above page item. In your case, you can use the same logic that you have already in place (except the call to OWA_UTIL.REDIRECT_URL) :
declare
v_job varchar2(20);
begin
select job into v_job from emp where empno = :P9_EMPNO_R;
if v_job = 'ANALYST' then
:Px_PAGE_NUM := '1';
end if;
if v_job = 'MANAGER' then
:Px_PAGE_NUM := '10';
end if;
end;3. Create a "On Submit: After processing" branch. Specify the "Target Type" as "Page in the application" and "Page Number" as &Px_PAGE_NUM. (with the dot).
I hope the above helps.
BTW, the following thread in the forum related to OWA_UTIL.REDIRECT_URL might help:
issue OWA_UTIL.REDIRECT_URL with APEX 4.1.1

Redirecting to different pages based on value from table linked from report

Hi,
I wanted to navigate to different pages from a report link based on a value from the table on which the report is built. I was able to link to particular page without any problem.
But, I wanted to link to different pages based on value in the table. Please let me know how can I do this?
Thanks,

kaminey wrote:
Hi,
I wanted to navigate to different pages from a report link based on a value from the table on which the report is built. I was able to link to particular page without any problem.
But, I wanted to link to different pages based on value in the table. Please let me know how can I do this?APEX version?
Is this a standard or interactive report?
How does the value from the table determine the target page used in the link? Is it a page number? Or the result of some computation or process?
When you have a problem you'll get a faster, more effective response by including as much relevant information as possible upfront. This should include:
<li>Full APEX version
<li>Full DB/version/edition/host OS
<li>Web server architecture (EPG, OHS or APEX listener/host OS)
<li>Browser(s) and version(s) used
<li>Theme
<li>Template(s)
<li>Region/item type(s) (making particular distinction as to whether a "report" is a standard report, an interactive report, or in fact an "updateable report" (i.e. a tabular form)
With APEX we're also fortunate to have a great resource in apex.oracle.com where we can reproduce and share problems. Reproducing things there is the best way to troubleshoot most issues, especially those relating to layout and visual formatting. If you expect a detailed answer then it's appropriate for you to take on a significant part of the effort by getting as far as possible with an example of the problem on apex.oracle.com before asking for assistance with specific issues, which we can then see at first hand.

Redirect user to a different Page based on number of Liquid output result

I want to redirect the user to a different page based on the number of results. I have some multi-account users and single account user in my secure zone. I want single account users to be sent to a different page, while multiple account user should be shown their accounts and they user can now click the account he/she wants to access. This is my code:
{module_data resource="customers" fields="company, email1" where="\{'company':\{'$contains':'{{this.globals.user.email}}'\}\}" skip="0" limit="500" version="v3" collection="companyXtra" template=""}
{module_webapps id="21927" filter="all" collection="companyAccess" template=""}
{% for item in companyAccess.items -%}
{% assign counter = {{forloop.length}} -%}
{% if globals.user.email = item.email and counter = 1 -%}
<script>
window.location.replace("/single-account-user.html");
</script>
<a class="w-inline-block szone-navlinks multiplecoy" href="{{item.url}}">
    <div class="szone-holder">
      <div class="szone-narrate addenrolee">{{item.name}}</div>
    </div>
</a>
{% else %}
<p><a href="{{item.url}}">{{item.name}}</a></p>
{% endif %}
{% endfor %}
</div>
Please what I'm doing wrongly. Can someone kindly assist. Thanks.

Hi Liam I have since been reviewing my query using the BC API Discovery which has been a good guide for me. But the result is just displaying the core customer's company, though the other company has a default email/email1 as the core customer.
This is my new query:
{module_data resource="customers" version="v3" fields="company" skip="0" limit="10" where="\{'email1.value':\{'$contains':'{{globals.user.email}}'\}\}" order="id" collection="myData"}
<pre>{{myData|json}}</pre>
This is the json:
"moduleName": "data",
"moduleDescriptor": {
"templatePath": null,
"parameters": "resource=\"customers\",version=\"v3\",fields=\"company\",skip=\"0\",limit=\"10\",where=\ "\\{'email1.value':\\{'$contains':'[email protected]'\\}\\}\",order=\"id\",collection=\"myData\"",
"apiEndpoint": "/api/v3/data",
"objectType": "-1",
"objectId": "-1",
"adminUrl": ""
"items": [
"company": "The vivove company Limited"
"totalItemsCount": 1,
"skip": 0,
"limit": 10,
"params": {
"resource": "customers",
"version": "v3",
"fields": "company",
"skip": "0",
"limit": "10",
"where": "\{'email1.value':\{'$contains':'[email protected]'\}\}",
"order": "id",
"collection": "myData"
I expected to see two companies. This is screenshot of my the companies in the CRM:
Screenshot by Lightshot
Screenshot by Lightshot
Thanks. most appreciated.

How to redirect to a different page when a browser's Back button is clicked

In my application a user logs-in and searches on the form provided. Now
If a I click on browser's Back Button I see a message saying Page Has Expired, now at this point if I click on the browsers refresh button it shows me the page again.I want if browser back button is clicked and then Refresh button is clicked I don't want to show the same page rather redirect to a different page and invalidate the session. Is there a way clicking on browser back button I redirect to a different page.I have the following code on top of each jsp pages:
response.setHeader("Cache-Control","no-cache"); //forces caches to obtain a new copy of the page from the origin server
response.setHeader("Cache-Control","no-store"); //directs caches not to store the page under any circumstance
response.setDateHeader("Expires", 0); //causes the proxy cache to see the page as "stale"
response.setHeader("Pragma","no-cache"); //HTTP 1.0 backward compatibilityAny help is appreciated. Thanks

There's no way to know when the back button is clicked, so I don't see how you can do anything about it. Since that message comes from a page which was created by a POST form submission, you can put some unique value in a hidden field that let's the server side record and if it gets it again (from the reload) then it can ignore the form data and redirect.

How can i print just one page of photo book without printing the entire book

how can i print just one page of photo book without printing the entire book

Jim,
Take heart. We can help.
First turn on page view so you can see how the content of your sheet fits on the page(s). A Numbers document contains sheets (listed on the left) which in turn contain tables, charts, text, and graphics. Select the sheet you want to print on the left, then enable page view by selecting the menu item:
"View > Show Print View":
Now you should see your content and how it fits on one, or more, pages. If thie content is too big for one page use the controls and the bottom left of the window to expose the sheet controls:
Here a table is too big to fit on one page:
slide the "Content Scale" slider so the content fits:

How can I view as "single page continuous" in full screen mode?

how can I view as "single page continuous" in full screen mode?
preferences->page display:
preference->accessbility:

Not possible.

How can we define custom error page in protal application

How can we define custom error page in protal application, like we define "jsp Error page " in JSPs

Hi,
Check these:
Customization of Portal Runtime Errors and portal standard error codes
http://help.sap.com/saphelp_nw04/helpdata/en/9a/e74d426332bd30e10000000a155106/frameset.htm
http://help.sap.com/saphelp_nw04/helpdata/en/ec/1273b2c413b2449e554eb7b910bce7/frameset.htm
Regards,
Praveen Gudapati

How can I make a decorative page border in Pages?

How can I make a decorative page border in Pages?

Hi Janet,
I suppose that you are asking how to include a decorative border of your design into a pages document. How you design that border is rather out of the range of these discussions. So, let's say that you have a graphic that approximates a picture frame and has the required dimensions to frame your content.
If you want to have the graphic appear on every page, Drag or Insert > Choose, to incorporate your design in to the document. The position it as you want it, and then Arrange > Send to Background and Format > Advanced > Move Object to Section Master.
If there is more than one section in your document, there may be more considerations, but if you do this at the outset in the creation of your document, the design of the first section will flow to subsequent sections.
Regards,
Jerry

How can I conditionally present different pages based upon a promo code?

Similar Messages

Maybe you are looking for