How can i connect macbook pro to time capsule via ethernet

I just purchased a Time Capsule to backup my MacBook Pro. I tried to back up the files via wifi but it was taking forever. I tried connecting the Time Capsule to the MacBook via an ethernet cable but it won't recognize it. Any suggestions?

When you plug in by ethernet, make sure you plug into a LAN port on the TC... ie one marked.. <...>
Make sure the connectivity led goes on.. tiny light on the port itself.
On the MBP turn off wireless.
Make sure ethernet is set to auto .. check its status in network preferences.
Finally press and hold the reset button for 10sec to reset the TC.. that usually brings them back to life if it is acting up.
What OS on the MBP?? Lion and ML have issues finding the TC.

Similar Messages

How can i connect macbook pro with iphone 4 via bluetooth?

I`ve connected iphone with macbook pro few weeks ago for i-net surfing, but i had to use cable. Now i wanna try icloud, and i`ve faced that trouble. My mbp sees iphone, makes pair, but fails to connect it. If i try it with iphone, a message "mbp cant be connected, it isn`t connectible device"-something like this- appears and mbp disappears from known devices list. How can i solve that?
MacBookPro8,3 (17")-june 2011
Boot ROM: MBP81.0047.B1E
SMC: 1.70f3
Mac OS X 10.6.8 (10K549)
iphone 4 16 gb
model MC603ZA
ios 4.3.5 (8L1)
boot rom 04.10.01

I have somehow the same problem. I just bought the new iPhone 4S and tried to connect it to my MacBook Pro (OS X 10.6, latest version, model 2011). The Phone did not see the Mac but the Mac the Phone, so I connected the Phone via Mac.
It worked for about 5 seconds, but then I got this error message:
It's German and means that the network is not available.
Of course I tried again to connect, but I now get always this error:
It says that the device is not available...
I deleted the iPhone from the list under Mac and tried again, but it's still the same.
No my Questions to the community:
Why does the iPhone not see the MacBook?
Why does it allways disconnect?
Is Sync not possible via Bluetooth?
Thanks for your help!

Can I connect my Airport Extreme Time Capsule via ethernet to another router (non-Apple)?

I've been trying to figure this out for a few hours and have gotten nowhere. I have an Archer C7 AC1750 router set up in my office, connected to my Zoom 5341 DOCSIS 3.0 Modem; this has been my main router and has worked fine. I have moved some things around and now have my PS3 and PS4 in my master bedroom but can no longer hook them up via ethernet to the Archer C7. I have run ethernet through the attic into the master bedroom and want to use my Airport Extreme Time Capsule as a way to hook up the consoles via ethernet. If I can use the Airport Extreme to extend my wireless network back to the bedrooms that is even better, although that is an afterthought.
I am not sure what the settings need to be to make this happen. I have searched and tried a number of things but have not found a working solution.
Any help would be greatly appreciated.

Please start over with a default reset on the Time Capsule. This will not affect any of the stored data that you might have on the drive. You can use the same device name and password that you used before if you wish.
Power up the Time Capsule for a few minutes. Then hold in the reset button firmly for 10 seconds and release. Allow a full minute for the Time Capsule to restart to a slow, blinking amber light.
Make sure that the Ethernet cable connection from the Archer router connects to the WAN "O" port on the Time Capsule
Open up AirPort Utility
Click on Other WiFi Devices
Click on Time Capsule xxxxxx
AirPort Utility will suggest a setup, which you want to ignore
Instead, click the Other Options button
Select the Create a new wireless network setting and click Next
In the Network Name box, enter the exact name of your Archer wireless network
In the Base Station name box, enter a name that you want to use for the Time Capsule device
Uncheck the box to use a single password
In the Network Password box, enter the password for the Archer wireless network
Verify on the next line
In the Base Staion box, enter a password that you want to use as a device password for the Time Capsule
Verify on the next line
Click Next and wait while the AirPort Utility creates a network
Ignore the step about unplugging the modem and click Next
Do not enable the Guest Network option and click Next
Wait while the network is being set up. When you see the message that the wireless network is available, click Done
The Time Capsule will now appear in AirPort Utility with a blinking amber light
Click on the Time Capsule icon, and then click on Edit in the next small box that appears
Click the Network tab at the top of the window
Change the setting for Router Mode from DHCP and NAT to "Off (Bridge Mode)"
Click Update at the lower right and click Continue
Wait a full minute for the Time Capsule to restart and you should have a green light
It would be an excellent idea to power off both the Time Capsule and Archer router now, wait a minute, then start the Archer router and let it run a minute. Then, start the Time Capsule up and give it a minute
You should be all set. The Ethernet ports on the Time Capsule are now operable and the wireless network has been extended using AES encryption.

Can't backup macbook pro to time capsule

I have backed up IMAC to my time capsule no problems but when trying to back up my macbook pro it wont do it. The macbook pro sees the time capsule but once time machine commences you get error mesage advising problem encountered as macbook pro and time capsule not on same network?
Any ideas?

Are you connected to the TC by wireless?
Are you running Lion? Try using ethernet and turn off wireless.. what happens??

How can I connect MacBook Pro OSX 10.5.2 to G3 Lombard (bronze) OSX 10.1.5?

Can anybody please tell me in simple terms how to connect my MacBook Pro OS X 10.5.2 to my G3 Lombard (bronze keyboard) laptop OS X 10.1.5 so that I can share files. I wish to drag files from the old G3 computer's hard drive into the hard drive of the new MacBook Pro as well as search the old hard drive from the MacBook Pro. I have an ethernet crossover cable as well as regular ethernet cables. Can I connect the computers directly, or should I disconnect my Linksys router from the modem and connect the computers through the router via ethernet?
I have tried both ways, and failed. However, I think I need clear instructions in how to share under both OS X system versions, to set a file's permissions (in both OS X versions), how to set the firewalls (I have Norton Personal Firewall in the G3 and the OS X firewall in the MacBook Pro), how to see the hard drives of the other computer, and how to set anything else properly, as well as any detail that will make this easy to do properly.
Finally, I need to be able to return the settings of the MacBook Pro back to secure settings that will allow me to connect safely when I take it to work and connect to the ethernet network there. Thank you for your help.
Sincerely,
Wilson

connect the computers through the router via ethernet
Both these computers are capable of File Sharing using IP. Only Macs running 10.3.9 and earlier can use AppleTalk File Sharing. Rendezvous/bonjour can help you on the later 10.5 Mac, but may not be too helpful on the 10.1.5 Mac. So you may need the IP address of the 10.1.5 Mac to connect to it.
On the Mac to share its files:
System Preferences > Sharing > Services
check "Personal File Sharing" AND
System Preferences > Sharing > FireWall
check "Personal File Sharing" to let that traffic come through.
I expect it is similar for Norton FireWall, but Norton has such a \[well deserved] rotten reputation, and has pretty much pulled out of the Mac market, so help on this may be hard to come by.
On the \[10.5.2] Mac that wants to mount the Shared Volumes:
In the Finder, Go Menu, select "Connect to Server"
Select your 10.2.5 Mac in the window that opens and click connect. If it is not seen, you can browse for it or specify its IP address.
You get a login Window. Login using an ID \[from the 10.1.5 Mac] that has Permissions to read and write the files you want to share. The drive(s) or Folder(s) you specified will mount as network Drives on the desktop. Drag and drop files in both directions to your heart's content.
N.B.: If you choose "Guest", you will have access to the "Shared" folder ONLY.
You have made no changes or compromises to your 10.5.2 Mac, so no Undo is necessary to take it back to work on Monday.
Message was edited by: Grant Bennet-Alder

How can i connect plex app with time capsule

i have a time capsule 2TB and iphone 5s and ipad mini 2
i stored all my movies on the TC and i can acces them by imac and apple tv
i just bought plex for ipad and iphone and don't now how to connect to TC
i want play these movies by ipad by plex connected to TC but don't know how to
please help

i just don't know to acces the TC with the plex app i tried several thing like port forwarding but can't figure it out
The plex app is a client.. you must be running a plex server in your network..
https://plex.tv/ios
Since the Apple Time Capsule cannot host any media.. since it has no media extensions it is impossible to support plex server on it. You must run a plex server on a computer or intelligent device.. TC doesn't rate as it is a fixed router with nothing to help you.

How can I connect remotely to my Time Capsule now Mobile Me is gone?

Hi,
I have a Time Capsule with a trio of external hard drives connected to it where I store all my files and backups.
In the past I used Mobile Me's Back to my Mac so that the USB volumes appeared in the shared area in Finder on all my Macs so that I could access my data from anywhere. Great... But...
Now that Mobile Me is gone, is there any way I can do the same with iCloud on a computer still running Leopard (and thus without an iCloud setup option in System Preferences)?
Thanks in advance for any help or suggestions!

Again, I thank you for your reply, 'LaPastenague'. I can't get over what a wonderful asset these communities are, especially for us eager to learn Apple newbies!
In terms of my network:
Provided by my local cable company, it includes a 1TB Time Capsule that acts as router and host to a USB hub which holds 3 external drives. The internal TC drive stores my data. One of the external drives holds the Time Machine backups from my various Macs, the other two hold media and backups for my kids' PCs, etc. Also on my network is a 5 port switch to accommodate my kids' game consoles and an old networkable DVD player. On the network are also two Airport Expresses. One of the Expresses extends the range of my wireless to the upstairs and the other hosts an inkjet printer. And, finally, on the network is a TCP-IP HP laser printer.
I have played a bit with apps like LogMeIn and Teamviewer and found they work well for things like baling my folks out of technical difficulties remotely, but preferred the Back to My Mac solution offered by Mobile Me to (relatively) safely and (totally) seamlessly mount my Time Capsule's drives as volumes in the Shared section of my Macs' Finder. No fuss, no muss! ...despite Mobile Me's less than stellar reputation, it worked perfectly for me.
I went back to work this week at my job in education and, at first, privately cursed our IT department for bumping up security over the summer break resulting in blocking my home volumes from appearing. Then I realized, of course, that since last I sat at my desk, the Mobile Me service had be closed down and that was the real culprit for the loss of my mounted home volumes.
And, as established earlier in this discussion, my old iMac was never going to play nice with Lion or better to move up to iCloud, so I was going to have to go back to the drawing board.
I appreciate your eBay suggestion. However, although not a domain client, as my old iMac does reside on the school board's network, I'm fairly certain the VPN route would not be an option. I don't imagine building a secure tunnel to my data storage at home would be a priority to our IT department! <G>
USB Flash drives are a pain to sync and keep track of, but I guess that is what I will have to do for work.
<sigh>
Once again, thanks for your help.

Want to connect MacBook Pro to the internet via ethernet cable for the first time?

I Plugg the cable for Ethernet> Then I type my IP adress> don't know what to type in these blanks:
Subnet Mask, Router
What DNS?
I want to plug the cable for Ethernet then see the internet work?
=

We cannot answer your questions.. and the method looks wrong.. why are you doing it manually.. just use dhcp and see if it works.
There is hardly a modem or router out there that doesn't have dhcp setup for automatic setups.
If it is manual then there is no way we can give you the values..
They are determined 100% by the network you plug the computer into.. and the setting of that network.
Tell us more if you supply modem router.. and ISP info and why it is not working with dhcp we might be able to help further.

Connect apple tv to time capsule with ethernet?

How do you connect apple tv to time capsule with ethernet?

Oh, that's so sad. . Im sorry, but this problem requires professional help. At least I can't help you. Here is a link to Apple - Support - Contact Support.

Can't connect macbook pro to internet with airport extreme

Can't connect macbook pro to internet with airport extreme

If you have ethernet still on your MBP plug it in by ethernet and tell me if that works.
Tell me how the Airport is setup.. what broadband modem and router you have.
What OS on the laptop? Yosemite I guess.. since it is the most troublesome.
Did it work before whatever change was made? Has it worked in the past? When did it stop and what did you do that coincided with it stopping?
Upgrade to Yosemite??

How do I connect a 1 T time capsule to a new airport extreme so I can use it with time machine?

How do I connect a 1 T time capsule to a new airport extreme so I can use it with time machine?

Bridge the TC.. plug it into the AEBS with ethernet.

How can i change macbook pro a1278 keyboard ?

how can i change macbook pro a1278 keyboard ?

Yes. It will be very simple.
Power down your mac. Hold down the option key on startup.
You will see disk utility. Go in disk utility and click the erase button for your HDD data.
Then go into install OS X and install the operating system.
It will be a completely fresh install ready for selling.

How to restore macbook pro from time capsule machine backup

ow do I restore my MacBook Pro from time capsule machine as hard drive was crashing and replaced with new hard drive.

OS X Yosemite: Recover your entire system
To follow the instructions, you'll need to start up either from Internet Recovery or from your installation disc, depending on the model.

MacBook Pro and Time Capsule after adding new wireless router

I have a MacBook Pro and Time Capsule (which functions wirelessly to router and computer). I added a new wireless router (netgear, not my idea) and had to change name of wireless network. Now Time Capsule flashes amber and does not show up in Airport Utility.
Do I have to set up Time Capsule from scratch? If so, if you can aim me to directions I won't have to waste tech support's time.
My additional question on a similar vein: I also have a Time Capsule (second time capsule) which is plugged into the wireless router using ethernet cable for use with a windows notebook running windows 7 which backs up wirelessly. Do I have to change anything on this Time Capsule (second Time Capsule) as a result of change in name of network (I've already adjusted computer to connect to network)?

Hi DD,
If you don't get answers here, try posting in the Time Capsule forum (http://discussions.apple.com/forum.jspa?forumID=1253) and/or the Time Machine forum (http://discussions.apple.com/forum.jspa?forumID=1342).

Connecting Macbook with Time Capsule via Ethernet

Hello!
I have a time capsule and a macbook. I used to backup my data with the time capsule via ethernet. Now there was an update to airport I guess and since then the menue to configure the time capsule looks different and now I have trouble finding out how to set up the connection between macbook and time capsule via ethernet. I dont want the WLAN to be used so I want the ethernet be the connecting part of both esp because i want to backup lots of data now but Im missing the setting that said use use time capsule via ethernet. I just dont know how to set it up now.
I have the ethernet cable in the very left ethernet slot next to the reset button of the time capsule and its also plugged in to the ethernet slot on the macbook. But what are the settings for this connection.
Can someone help please otherwise i think my 23GB backup will take 3 days...
Thanks in advance
Dine

Open the network preferences and make sure the ethernet is getting an IP from the TC.. you do not need to change any settings .. all you need is network connection.. if the ethernet is working just turn off airport for the time the backup is going on. Once you turn off airport in the MBP the connection will be forced to ethernet. You can do it more correctly by rearranging the order of preference for network connection.. but for now.. just turn off airport.

How can i connect macbook pro to time capsule via ethernet

Similar Messages

Maybe you are looking for