How can I convert a track with multiple comps to one new complet audio file

I have one track that is great - but it is composed of different sections (NOT regions) which are different comps from punching in on different regions -- (you can see the divisions between the comps, and each different comp has its comp number (or name) - but these are NOT region divisions). I would like to make the whole track one new audio file to work with - that is, join all the comps together as one new audio file (as you would join separate regions on a track into one new audio file). All I can think of is to unpack the track (comps) onto different tracks (channel strips) which would make each comp a new region on a new track and then paste them back together and then make an audio file, but this seems fairly complicated

hey - it appears that this worked -- i exported it to another track (as an audio file -- this is done in the "file" menu) and it now is on a new track in t he same project as one audio file without an divisions between the comps -- appears to have worked -thank you so much (btw, don't forget to tell it what type of file you want it exported as, it wants to default to aif, --i record in wav files 24 bit
thanks again for everyone's responses - this forum has helped me so much
peace - alex

Similar Messages

  • How can I convert the download.m4a and Info.plist into the right audio file

    The topic is actually the problem that I have.
    I have bought music and it was downloaded successful (all of it) but iTunes had a strange freeze while converting the files into the right audio file. Some files were converted but after the freeze no more.
    I'm now left with these .tmp folders in the downloads folder which have the download.m4a and Info.plist files.
    My iTunes is able to play these download.m4a files, but they show no information and covers and this is really annoying. I could write and change it all by myself, but than I would still miss some information (and covers).
    Is there any way for me to convert or combine these files?
    Note: I'm not able to restart any downloads, because they were successful.

    Hello ed2345,
    Thanks for the help, but this is not the problem.
    It's hard to describe the problem, but I'll try it again, this time with pictures.
    I was left with the following folders in the iTunes Downloads folder.
    http://www.picfront.org/d/7yb3
    These TMP Folders have a download.m4a and a Info.plist file.
    After moving the audio files in iTunes a bit I get this.
    http://www.picfront.org/d/7yb2
    As you can see no other Information for the download.m4a than the length.
    That's how the .m4p file looks like
    http://www.picfront.org/d/7yb1
    And this is how the same .m4a file currently looks
    http://www.picfront.org/d/7yb0
    Like I said, I could edit all these download.m4a files by myself but that would leave some information out.
    Note: Sorry, I hope the links do not spam you with annoying ads. I don't get any but I was told that there can be some annoying one.

  • How can i create  excel sheet with multiple tabs using utl file?

    how can i create excel sheet with multiple tabs using utl file?
    any one help me?

    Jaggy,
    I gave you the most suitable answer on your own thread yesterday
    Re: How to Generating Excel workbook with multiple worksheets

  • How can I get an album with multiple artists to display in my Nano as one album insteadof multiple albums?

    How can I get an album with multiple artists to display in my Nano as one album insteadof multiple albums?

    See this page for helpful information.
    http://samsoft.org.uk/iTunes/grouping.asp
    B-rock

  • How can a calender be synced with multiple apple devices

    how can a calender be synced with multiple apple devices so that all the users can be able to access the calender and also the entries done by one of them?

    Hi Muneshdm,
    Welcome to Apple Support Communities.
    See these articles for information on setting up iCloud on multiple iOS devices, as well as how to share calendars:
    iCloud: Set up iCloud on your devices
    http://support.apple.com/kb/PH2609
    iCloud: Share a calendar with others
    http://support.apple.com/kb/ph2690
    Best,
    Jeremy

  • HT1386 When I connect my iPod Touch to a new laptop (Macbook Air) the "Info" tab won't appear and therefore I cannot sync it with my new iTunes. How can I sync this iPod with the iTunes on my new laptop?

    When I connect my iPod Touch to a new laptop (Macbook Air) the "Info" tab won't appear and therefore I cannot sync it with my new iTunes. How can I sync this iPod with the iTunes on my new laptop?

    There is no Info tab in Mavericks
    if you use OS X v.10.8.5 or earlier. If you use OS X Mavericks v.10.9 or later, your contacts, calendars, and other info are updated on your computers and iOS devices via iCloud. For more information, see iCloud Help at icloud.com.
    iTunes 11 for Mac: Sync contacts, calendars, and other info with iPod, iPhone, or iPad

  • HP Officejet 6500A How do I scan a document with multiple pages into one file?

    HP Officejet 6500A Plus e-All-in-One Printer - E710n
    Windows 7 (64 bit)
    How do I scan a document with multiple pages into one file?  My old printer (psc 2110) asked after each scan if I wanted to scan another page.  At the end I had one pdf file with multiple pages.
    This new one creates one file for each page and I cannot find a way to create one pdf file with multiple pages.
    This question was solved.
    View Solution.

    Hi mpw101,
    If you load the papers into the ADF - Automatic Document Feeder, and then select Document to PDF then they will all be scanning into one file. Let me know if this works for you?
    I am an HP employee.
    Say Thanks by clicking the Kudos Star in the post that helped you.
    Please mark the post that solves your problem as "Accepted Solution"

  • How can I make the popup with empty fileds and create new record?

    I would like to use a popup to create new record.
    I created a af:popup by drag and drop a VO from data control to jsff. then, I created a button and place a af:showPopupBehavior. I was able to popup window by click the button.
    however, the window filled with the information from the 1st record. and when I select a record in table and click popup, the popup is filled with that record.
    How can I make the popup with empty fileds and create new record by saving the popup?
    Thanks

    You can have edit and new buttons, in the PopupFetchEvent identify button source (using popupFetchEvent.getLaunchSourceClientId()) if new button clicked clear the binding using below code.
    If you want to see empty fields, in the popup PopupFetchEvent clear the input component bindings.
    resetBindingValue("#{bindings.<componentid>.inputValue}", null);
        public static void resetBindingValue(String expression, Object newValue) {
            FacesContext ctx = FacesContext.getCurrentInstance();
            Application app = ctx.getApplication();
            ExpressionFactory elFactory = app.getExpressionFactory();
            ELContext elContext = ctx.getELContext();
            ValueExpression valueExp = elFactory.createValueExpression(elContext,expression,Object.class);
            Class bindClass = valueExp.getType(elContext);
            valueExp.setValue(elContext,newValue);
        }

  • How can I port my PSE with the data to a new PC? [was:Jeanné]

    Wie kann ich mein PSE mit den Daten auf den neuen PC portieren?

    Jeanné wrote:
    How can I port my PSE with the data to a new PC?
      Translations by Microsoft® Translator
    The only way you can do this by installing the PSE on your new machine using the DVD and the serial number you must have bought.  Once this is done, you might want to copy all your photos from the old machine on to a flash drive and then copy them from flash drive to your Pictures folder and let PSE finds them and catalogs them automatically.
    This method is ideal if your haven't created very sophisticated catalog in your old machine because you may also want to transfer the old catalog on to your new PC so that you don't have to re-create the catalog from scratch.  If you want to transfer the catalog as well then on your old PC launch PSE Organizer and go to:
    File >> Backup Catalog
    This is also saved on the removable flash drive
    Now go to the new PC and launch Organizer and do almost the same thing except:
    File >> Restore Catalog
    Now this should almost get you started.
    Good luck.

  • How can I get a Album with multiple artists to appear as a single album with all of the tracks?

    How can I get a Album that contains multiple artists to appear as a single album with multiple tracks?  Also when I sync iTunes with my iPhone or iPad the Album appears as multiple albums with each artist.  The Album title is the same on each of the affected tracks.

    Quick answer:  Select all the tracks on the album, File > get info, and either give them all a single "album artist" or check the "compilation" flag.
    If these are from multiple-CD sets you may also need to enter the appropriate information in the disc number fields.

  • How can you develop photo galleries with multiple pages using the web module?

    Going through the web module I can see there are many options for developing a web page with a single collection of photos.  How can you develop a web site with multiple pages containing different categories of photos using the Lightroom web module?

    This thread will give you several ideas.
    Re: How do you embed a gallery into an existing website?

  • How can I do order tracking with a DC speed signal?

    I'm using SignalExpress 2009 to bring in several strain signals which will require order tracking.  The speed signal will be a 4-20 mA DC input.  How can I set this up as my speed reference?

    Hello AEI_JR,
    I have been playing around with this and here's what I've found.  It's a three step process, but we can absolutely do this (even if it's not intuitive). 
    Steps 1 and 2 are to drag your signals of interest to a time domain plot (same one). You want to add your x-axis first and then your y-axis.  You'll see the units on the side change from step 1 to 2 from <unit> to Amplitude as shown below. Step 3 is to right click and select View As»XY Graph.  The three looks are shown below.  Cheers!
    ==>==>
    ColeR
    Field Engineer

  • How can I compare single value with multiple value...

    Hello,
    I want to compare one value with multiple values, how can it possible ?
    Here in attachment I tried to design same logic but I got problem that when I entered value in y that is compared with only minimum value of x, I don't want that I want to compare y value with all the x value and then if y is less then x while loop should be stop.
    I want to do so because in my program some time I didn't get result what I want, for example x values is 4,5,6,7,8  and y value is  suppose 6 then while loop should be stop but here it consider only minimum number and its 4 here so while loop is not stop even y is less then 7 and 8. So I want to compare y value with all the entered values of x and if y is less then any of x values then while loop should be stop and led should be ON.
    Please guide me how can I do so.....
    Solved!
    Go to Solution.
    Attachments:
    COMPARISON.vi ‏8 KB

    AnkitRamani wrote:
    Thank you very mach for your help..
    may be i have solved this ....i have made one change in my vi that instead of min. i select max and max. value is compare with the value of y and then if y is less then the max. while loop will be stop other wise its run continuously.
    this is working fine...
    any ways thanks again for your help and time...
    I have to agree with Lewis - his way is more efficient.
    Bill
    (Mid-Level minion.)
    My support system ensures that I don't look totally incompetent.
    Proud to say that I've progressed beyond knowing just enough to be dangerous. I now know enough to know that I have no clue about anything at all.

  • How can I rearrange IMAP folders with multiple accounts in Mail?

    Hi all,
    I switched to the Mac in 2004, but I've never really used Mail (been using Entourage). I set up an IMAP account in Mail, and was very impressed. So I decided to set up my other IMAP account, too. Now things are a bit messed up. I have these folders
    Inbox
    Drafts
    Sent
    Junk
    Trash
    Email1
    Email2
    Under Email1 and Email2 are all the IMAP folders for the respective email address, except Inbox, Drafts, Sent, Junk and Trash are separate, and each of those folders has a folder in it called Email1 and one called Email2. How can I change this so that I just ahve the Email1 and Email2 folders, and everything appears under those?
    On a less important note, is there any way to make Mail ignore IMAP folders? My email server creates a folder called '.mailboxes' for each IMAP account, and just stores some of its information in there, nothing I want in Mail. So is there a way I can hide this .mailboxes folder?
    Thanks in advance

    Hi mr max pie whatever.
    This is actually one of Mail’s best features and cannot be changed.
    Instead of grouping mailboxes by account, Mail groups them by purpose first (and uses the account name to differentiate the individual mailboxes associated with each account), then groups by account the remaining mailboxes that don’t belong to any of the standard groups.
    This has the advantage of letting you choose at any time, and independently for each mailbox type, whether you want to look at your Inbox, Sent, Trash, etc. mailboxes as if you had just one of them shared by all accounts (i.e. an aggregate), or look at each of the corresponding individual mailboxes separately.
    As to the “.mailboxes” folder that you’d rather not see there, I believe Mail shouldn’t show it if the name begins with a period. Moreover, I’ve troubleshooted a few cases where the problem was the opposite, i.e. the user had renamed a mailbox with a leading period and it became inaccessible as a result. I don’t know why Mail behaves so inconsistently in this regard. If all the server-stored mailboxes were subfolders of a parent folder, you could solve the problem by typing the name of the parent folder in Preferences > Accounts > Advanced > IMAP Path Prefix...

  • How can i author a DVD with multiple timelines so that "previous chapter" actually works?

    I am trying to burn a DVD with multiple short films. i used a timeline for each film and a playlist for the "play all" button that includes all timelines. Problem is when you press previous chapter it only takes you to the beginning of the current film youre watching, no amount of double or triple clicking back will work. How do I get around this?

    To mix the footage, you should be able to go back to PrPro, and create a 16:9 Sequence. Bring the 4:3 material into that, allowing the black bars to exist, and then Export that 16:9 Sequence as 16:9, for Import into En. You will have the pillarboxing with that 4:3 material, but that is what you want, correct?
    Good luck,
    Hunt

Maybe you are looking for

  • How to use different font styles in the same boolean text?

    Hi all, As reported here http://digital.ni.com/public.nsf/allkb/6BD344ACA4DEE20A8625692700737E16, it is possible to change font color, size or other font properties of a subtext in a string indicator. This can be applied to a caption too. I'd like to

  • Can't connect to GMail to Sync

    When my iPad is connected to iTunes, I'm trying to Sync Contacts with Google Contacts. This requires me to logon to Google. When I do so, iTunes tells me "the Google ID or password was incorrect". I know this is not true - I can easily logon to gMail

  • Problems after applying latest Airport update.

    I have a core duo macbook and was able to maintain a connection to my wpa secured wireless network before running software update a few days ago. After doing so, I can't maintain a connection. It simply stops working. I disconnect, reconnect, and os

  • Holding mouse down

    Hi I currently have an issue where as I'd like to repeat an action when a user holds down their mouse button on one of the buttons within my application. At present, I'm using the following: button_left.onPress = function() {      // action here This

  • Missing Last Letters in Search Results

    I am using Outlook 2010 (version 14.0.4760.1000) and am experiencing a problem in the search results list where the last letter of the sender, subject and folder (possibly any field with character data) is truncated by 1 character. For example, if th