How can I convert a video to a playable format?

This is a combined iTunes / iPod touch question.
I downloaded a video to iTunes. It is in 3pg format and it and plays perfectly in iTunes. However, when I tried to sync it into the iPod touch, it stopped with the error message that the touch could not play that type of file. So I used the "Convert Selection for iPod/iPhone" selection in iTunes and converted it to m4p format. Although this was able to load into the touch, it is corrupted to the point of being impossible to view or listen to. By corrupted, I mean that it "stutters" at a rapid rate. How else might I load the 3pg file into the touch, or how else could I convert it into something that is listenable?

3pg is an odd format... That or I just never seen it before. :P
iTunes just ***** at converting videos. So far all videos I tried converting with iTunes have resulted in the same error you got.
You're better-off using 3rd party apps, and then copying to iTunes, and then copying to the iPod.
Unfortunately I don't know of any conversion programs for Windows.
If you by chance have a mac, this program works great: http://www.apple.com/downloads/macosx/video/flv2itunes.html
The mac version of Handbrake below works great, hopefully the Windows version does, too:
http://handbrake.fr/?article=download
When converting with handbrake, make sure to use the iPod preset for the out-put video.
Hope this helps a little.

Similar Messages

How can I convert DVD- video into Apple's format so that it can be played and streamed from my Mac?

How can I convert DVD- video into Apple's format so that I can play the content on my Mac and also stream it to my Apple TV? A few years ago, I transferred all of my home videos onto DVD but now would really like to put these onto my Mac and stream them through Apple TV to watch on the "big screen". Any advice would be most welcome!! Thanks

MPEG Streamclip.
Apple do not have their "own" format. You need to convert your DVDs to H.264 though.

How can I convert Itunes video albums tracks to ipod tracks

How can I convert Itunes video albums tracks to ipod tracks?

3pg is an odd format... That or I just never seen it before. :P
iTunes just ***** at converting videos. So far all videos I tried converting with iTunes have resulted in the same error you got.
You're better-off using 3rd party apps, and then copying to iTunes, and then copying to the iPod.
Unfortunately I don't know of any conversion programs for Windows.
If you by chance have a mac, this program works great: http://www.apple.com/downloads/macosx/video/flv2itunes.html
The mac version of Handbrake below works great, hopefully the Windows version does, too:
http://handbrake.fr/?article=download
When converting with handbrake, make sure to use the iPod preset for the out-put video.
Hope this helps a little.

ITunes 11 has converted some songs to Quicktime movie format. How can I convert them back to MPEGs? format

iTunes 11 has converted some songs to Quicktime movie format. How can I convert them back to MPEGs?

I didn't mess with the iTunes Media folder previously, so I don't think that was the cause. Anyway, I manually fixed most of the songs, but I still can't figure out how to fix the movies that became listed as songs.
Here is a screenshot of what it looks like when I click on "Get Info" for one of the movies (which has ended up in the music section on iTunes):
There is no option to change the media kind to "movie" or "video" even though it is a movie and it still plays as a movie if I press play.

How can I convert MP3 to AWB or AMR format

How can I convert MP3 to AWB, AMR format?

Because I faced the same issue today and although the Nokia Multimedia Converter was last updated in the year 2003, it did the trick for me. Instead of giving the setup.exe your Nokia Account, go back one step, and use this to ‘register’ that product.
In that converter, as audio, select AMR Wideband (WB AMR) which creates .awb files. Those have a sampling rate of 16 000 Hz which is great for HD-Voice like audio books. Actually for voice-only media, I went for a bit-rate of just 12.2 kbps, still great as explained by Wikipedia. With that bit-rate only go for standard AMR if your phone does not support the wideband variant, because there is not difference in size.

How can i convert this data(00000000) into date format(yyyy-MM-dd)

Hi,
i am using this method to convert date format from string.
public static string FormatDate(string inputDate, string inputFormat)
System.DateTime date = DateTime.ParseExact(inputDate, inputFormat, null);
string datepresent = DateTime.Now.Date.ToString("yyyy-MM-dd");
return datepresent;
its working properly,
but when input data is like 00000000 i am getting error this is not valid.
how can i convert this into date format any help..!

Have you tried the above code:
I can see it is working with both Date and DateTime destination nodes.
Map:
Functoid Parameters:
Functoid Script:
public static string FormatDate(string inputDate, string inputFormat)
string datepresent;
if (inputDate == "00000000")
datepresent = "0000-00-00";
else
System.DateTime date = DateTime.ParseExact(inputDate, inputFormat, null);
datepresent = date.ToString("yyyy-MM-dd");
return datepresent;
Input:
<ns0:InputDateString xmlns:ns0="http://DateFormat.SourceSchema">
<DateString>00000000</DateString>
</ns0:InputDateString>
Output:
<ns0:OutputDate xmlns:ns0="http://DateFormat.DestinationSchema">
<Date>0000-00-00</Date>
</ns0:OutputDate>
If this answers your question please mark as answer. If this post is helpful, please vote as helpful.

How can I convert a report/ ALV in PDF format?

Can you tell me how can I convert a report or ALV in PDF format?
Regards,
Subhasish

hi ,
check this..
*& Report ZSPOOLTOPDF *
*& Converts spool request into PDF document and emails it to *
*& recipicant. *
*& Execution *
*& This program must be run as a background job in-order for the write *
*& commands to create a Spool request rather than be displayed on *
*& screen *
REPORT zspooltopdf.
PARAMETER: p_email1 LIKE somlreci1-receiver
 DEFAULT '[email protected]',
 p_sender LIKE somlreci1-receiver
 DEFAULT '[email protected]',
 p_delspl AS CHECKBOX.
*DATA DECLARATION
DATA: gd_recsize TYPE i.
Spool IDs
TYPES: BEGIN OF t_tbtcp.
 INCLUDE STRUCTURE tbtcp.
TYPES: END OF t_tbtcp.
DATA: it_tbtcp TYPE STANDARD TABLE OF t_tbtcp INITIAL SIZE 0,
 wa_tbtcp TYPE t_tbtcp.
Job Runtime Parameters
DATA: gd_eventid LIKE tbtcm-eventid,
 gd_eventparm LIKE tbtcm-eventparm,
 gd_external_program_active LIKE tbtcm-xpgactive,
 gd_jobcount LIKE tbtcm-jobcount,
 gd_jobname LIKE tbtcm-jobname,
 gd_stepcount LIKE tbtcm-stepcount,
 gd_error TYPE sy-subrc,
 gd_reciever TYPE sy-subrc.
DATA: w_recsize TYPE i.
DATA: gd_subject LIKE sodocchgi1-obj_descr,
 it_mess_bod LIKE solisti1 OCCURS 0 WITH HEADER LINE,
 it_mess_att LIKE solisti1 OCCURS 0 WITH HEADER LINE,
 gd_sender_type LIKE soextreci1-adr_typ,
 gd_attachment_desc TYPE so_obj_nam,
 gd_attachment_name TYPE so_obj_des.
Spool to PDF conversions
DATA: gd_spool_nr LIKE tsp01-rqident,
 gd_destination LIKE rlgrap-filename,
 gd_bytecount LIKE tst01-dsize,
 gd_buffer TYPE string.
Binary store for PDF
DATA: BEGIN OF it_pdf_output OCCURS 0.
 INCLUDE STRUCTURE tline.
DATA: END OF it_pdf_output.
CONSTANTS: c_dev LIKE sy-sysid VALUE 'DEV',
 c_no(1) TYPE c VALUE ' ',
 c_device(4) TYPE c VALUE 'LOCL'.
*START-OF-SELECTION.
START-OF-SELECTION.
Write statement to represent report output. Spool request is created
if write statement is executed in background. This could also be an
ALV grid which would be converted to PDF without any extra effort
WRITE 'Hello World'.
new-page.
commit work.
new-page print off.
IF sy-batch EQ 'X'.
 PERFORM get_job_details.
 PERFORM obtain_spool_id.
Alternative way could be to submit another program and store spool
id into memory, will be stored in sy-spono.
*submit ZSPOOLTOPDF2
 to sap-spool
 spool parameters %_print
 archive parameters %_print
 without spool dynpro
 and return.
Get spool id from program called above
IMPORT w_spool_nr FROM MEMORY ID 'SPOOLTOPDF'.
 PERFORM convert_spool_to_pdf.
 PERFORM process_email.
 if p_delspl EQ 'X'.
 PERFORM delete_spool.
 endif.
 IF sy-sysid = c_dev.
 wait up to 5 seconds.
 SUBMIT rsconn01 WITH mode = 'INT'
 WITH output = 'X'
 AND RETURN.
 ENDIF.
ELSE.
 SKIP.
 WRITE:/ 'Program must be executed in background in-order for spool',
 'request to be created.'.
ENDIF.
 FORM obtain_spool_id *
FORM obtain_spool_id.
CHECK NOT ( gd_jobname IS INITIAL ).
CHECK NOT ( gd_jobcount IS INITIAL ).
SELECT * FROM tbtcp
 INTO TABLE it_tbtcp
 WHERE jobname = gd_jobname
 AND jobcount = gd_jobcount
 AND stepcount = gd_stepcount
 AND listident <> '0000000000'
 ORDER BY jobname
 jobcount
 stepcount.
READ TABLE it_tbtcp INTO wa_tbtcp INDEX 1.
IF sy-subrc = 0.
 message s004(zdd) with gd_spool_nr.
 gd_spool_nr = wa_tbtcp-listident.
 MESSAGE s004(zdd) WITH gd_spool_nr.
ELSE.
 MESSAGE s005(zdd).
ENDIF.
ENDFORM.
 FORM get_job_details *
FORM get_job_details.
Get current job details
CALL FUNCTION 'GET_JOB_RUNTIME_INFO'
 IMPORTING
 eventid = gd_eventid
 eventparm = gd_eventparm
 external_program_active = gd_external_program_active
 jobcount = gd_jobcount
 jobname = gd_jobname
 stepcount = gd_stepcount
 EXCEPTIONS
 no_runtime_info = 1
 OTHERS = 2.
ENDFORM.
 FORM convert_spool_to_pdf *
FORM convert_spool_to_pdf.
CALL FUNCTION 'CONVERT_ABAPSPOOLJOB_2_PDF'
 EXPORTING
 src_spoolid = gd_spool_nr
 no_dialog = c_no
 dst_device = c_device
 IMPORTING
 pdf_bytecount = gd_bytecount
 TABLES
 pdf = it_pdf_output
 EXCEPTIONS
 err_no_abap_spooljob = 1
 err_no_spooljob = 2
 err_no_permission = 3
 err_conv_not_possible = 4
 err_bad_destdevice = 5
 user_cancelled = 6
 err_spoolerror = 7
 err_temseerror = 8
 err_btcjob_open_failed = 9
 err_btcjob_submit_failed = 10
 err_btcjob_close_failed = 11
 OTHERS = 12.
CHECK sy-subrc = 0.
Transfer the 132-long strings to 255-long strings
LOOP AT it_pdf_output.
 TRANSLATE it_pdf_output USING ' ~'.
 CONCATENATE gd_buffer it_pdf_output INTO gd_buffer.
ENDLOOP.
TRANSLATE gd_buffer USING '~ '.
DO.
 it_mess_att = gd_buffer.
 APPEND it_mess_att.
 SHIFT gd_buffer LEFT BY 255 PLACES.
 IF gd_buffer IS INITIAL.
 EXIT.
 ENDIF.
ENDDO.
ENDFORM.
 FORM process_email *
FORM process_email.
DESCRIBE TABLE it_mess_att LINES gd_recsize.
CHECK gd_recsize > 0.
PERFORM send_email USING p_email1.
perform send_email using p_email2.
ENDFORM.
 FORM send_email *
--> p_email *
FORM send_email USING p_email.
CHECK NOT ( p_email IS INITIAL ).
REFRESH it_mess_bod.
Default subject matter
gd_subject = 'Subject'.
gd_attachment_desc = 'Attachname'.
CONCATENATE 'attach_name' ' ' INTO gd_attachment_name.
it_mess_bod = 'Message Body text, line 1'.
APPEND it_mess_bod.
it_mess_bod = 'Message Body text, line 2...'.
APPEND it_mess_bod.
If no sender specified - default blank
IF p_sender EQ space.
 gd_sender_type = space.
ELSE.
 gd_sender_type = 'INT'.
ENDIF.
Send file by email as .xls speadsheet
PERFORM send_file_as_email_attachment
 tables it_mess_bod
 it_mess_att
 using p_email
 'Example .xls documnet attachment'
 'PDF'
 gd_attachment_name
 gd_attachment_desc
 p_sender
 gd_sender_type
 changing gd_error
 gd_reciever.
ENDFORM.
 FORM delete_spool *
FORM delete_spool.
DATA: ld_spool_nr TYPE tsp01_sp0r-rqid_char.
ld_spool_nr = gd_spool_nr.
CHECK p_delspl <> c_no.
CALL FUNCTION 'RSPO_R_RDELETE_SPOOLREQ'
 EXPORTING
 spoolid = ld_spool_nr.
ENDFORM.
*& Form SEND_FILE_AS_EMAIL_ATTACHMENT
 Send email
FORM send_file_as_email_attachment tables it_message
 it_attach
 using p_email
 p_mtitle
 p_format
 p_filename
 p_attdescription
 p_sender_address
 p_sender_addres_type
 changing p_error
 p_reciever.
DATA: ld_error TYPE sy-subrc,
 ld_reciever TYPE sy-subrc,
 ld_mtitle LIKE sodocchgi1-obj_descr,
 ld_email LIKE somlreci1-receiver,
 ld_format TYPE so_obj_tp ,
 ld_attdescription TYPE so_obj_nam ,
 ld_attfilename TYPE so_obj_des ,
 ld_sender_address LIKE soextreci1-receiver,
 ld_sender_address_type LIKE soextreci1-adr_typ,
 ld_receiver LIKE sy-subrc.
data: t_packing_list like sopcklsti1 occurs 0 with header line,
 t_contents like solisti1 occurs 0 with header line,
 t_receivers like somlreci1 occurs 0 with header line,
 t_attachment like solisti1 occurs 0 with header line,
 t_object_header like solisti1 occurs 0 with header line,
 w_cnt type i,
 w_sent_all(1) type c,
 w_doc_data like sodocchgi1.
ld_email = p_email.
ld_mtitle = p_mtitle.
ld_format = p_format.
ld_attdescription = p_attdescription.
ld_attfilename = p_filename.
ld_sender_address = p_sender_address.
ld_sender_address_type = p_sender_addres_type.
Fill the document data.
w_doc_data-doc_size = 1.
Populate the subject/generic message attributes
w_doc_data-obj_langu = sy-langu.
w_doc_data-obj_name = 'SAPRPT'.
w_doc_data-obj_descr = ld_mtitle .
w_doc_data-sensitivty = 'F'.
Fill the document data and get size of attachment
CLEAR w_doc_data.
READ TABLE it_attach INDEX w_cnt.
w_doc_data-doc_size =
 ( w_cnt - 1 ) * 255 + STRLEN( it_attach ).
w_doc_data-obj_langu = sy-langu.
w_doc_data-obj_name = 'SAPRPT'.
w_doc_data-obj_descr = ld_mtitle.
w_doc_data-sensitivty = 'F'.
CLEAR t_attachment.
REFRESH t_attachment.
t_attachment[] = it_attach[].
Describe the body of the message
CLEAR t_packing_list.
REFRESH t_packing_list.
t_packing_list-transf_bin = space.
t_packing_list-head_start = 1.
t_packing_list-head_num = 0.
t_packing_list-body_start = 1.
DESCRIBE TABLE it_message LINES t_packing_list-body_num.
t_packing_list-doc_type = 'RAW'.
APPEND t_packing_list.
Create attachment notification
t_packing_list-transf_bin = 'X'.
t_packing_list-head_start = 1.
t_packing_list-head_num = 1.
t_packing_list-body_start = 1.
DESCRIBE TABLE t_attachment LINES t_packing_list-body_num.
t_packing_list-doc_type = ld_format.
t_packing_list-obj_descr = ld_attdescription.
t_packing_list-obj_name = ld_attfilename.
t_packing_list-doc_size = t_packing_list-body_num * 255.
APPEND t_packing_list.
Add the recipients email address
CLEAR t_receivers.
REFRESH t_receivers.
t_receivers-receiver = ld_email.
t_receivers-rec_type = 'U'.
t_receivers-com_type = 'INT'.
t_receivers-notif_del = 'X'.
t_receivers-notif_ndel = 'X'.
APPEND t_receivers.
CALL FUNCTION 'SO_DOCUMENT_SEND_API1'
 EXPORTING
 document_data = w_doc_data
 put_in_outbox = 'X'
 sender_address = ld_sender_address
 sender_address_type = ld_sender_address_type
 commit_work = 'X'
 IMPORTING
 sent_to_all = w_sent_all
 TABLES
 packing_list = t_packing_list
 contents_bin = t_attachment
 contents_txt = it_message
 receivers = t_receivers
 EXCEPTIONS
 too_many_receivers = 1
 document_not_sent = 2
 document_type_not_exist = 3
 operation_no_authorization = 4
 parameter_error = 5
 x_error = 6
 enqueue_error = 7
 OTHERS = 8.
Populate zerror return code
ld_error = sy-subrc.
Populate zreceiver return code
LOOP AT t_receivers.
 ld_receiver = t_receivers-retrn_code.
ENDLOOP.
ENDFORM.
regards,
venkat.

How can I convert a video to a lower resolution?

Version: CS3
Like the title says...
I have a rather large video that I want to scale down,,, a lot.
I basically have a video that's 5040x1050 that I recorded with Fraps (I have trip2go which is why the large res). I want to convert this video to the respected ratio of 550x115 for a banner video in FLASH.
Please don't mention 100 other ways I should be doing this or other programs, the question above is the question I need the answer to because I have other projects as well where I want to simply drop the resolution from 1920x1080 to lower and can't... Besides for what is suppose to be one of the elite video editors on the market there surely doesn't seem to be any obvious ways to do what should be pretty basic and expected in a video program of any sort.
Thanks,
~Dan

Dan,
I agree with Stanley. There are also several rather long, older threads, on using FRAPS footage. I would do a Search of this forum for "FRAPS," as there might be some useful tips in those. One used to have some great flight-sim images, but those are now gone. Still, the discussion is there.
Good luck,
Hunt

How can I convert Music Videos or Movies to play in iTunes ?

I am running Windows 7 Professional and I have alot of Music Videos and Movies that I am wanting to play in the new iTunes ( 11.1.5.5 ). I am trying to find a good Program that can convert alot of these so I can import then into iTunes . I do not have Quick Time installed on my computer , to see if they will play on Quick Time. I play most of them with the VLC Player . My computer just will not give me the option of playing most of them with iTunes , so I realize that most of them are not compatible with iTunes .

Here's one way:
https://itunes.apple.com/us/app/video-to-dvd/id569680533?mt=8&ign-mpt=uo%3D2
Or, you look for software like this:
http://www.aimersoft.com/how-to-burn/iphone-video-to-dvd.html

How can I Convert HD video to SD DVD

Final cut Studio is a new tool for me. I've make a 3 minutes video montage in HD 720p and when I try to downconvert in SD M2V, the footage look very bad with a lot of aliasing and pixelisation. I've try many setup with the best quality in Compressor and nothing seem to work. The shooting was make with a Sony XDCAM EX1 in 720p 30fps and 60 fps. The only way I've found for downconvert with good quality is in Quicktime Mp4 or H264. I've another problem with the quality of my shooting: When a subject have a lateral displacement in front of my camera, image is not smooth, it's like a stroboscope. I've setup my timeline in 720 30p. When I playback direct from my camera in the monitor it's OK.
What's wrong ????
Merci beaucoup!

Try this:
Go to iTunes Store > Quick Links > Purchased > Movies
Uncheck the little box in the lower right corner that says Download HD When Available
Click the cloud download symbol to download the SD version of an item you want.
tt2

How can I convert a file in SAP RDI format?

HI All,
I have to convert the data which is to be passed to the Smartform into RDI format.
I am using Application form (Print Workbench)
for sending data to smartform.
Is there any Function Module for converting data into SAP RDI format?
Should I write this FM in User-exit of application form?
Thanks & Regards,
Anshumita.

HI
GOOD
I NEVER FACED SUCH KIND OF ISSUES, BUT HERE I AM GIVING SOME DETAILS ABOUT SAP RDI FORMAT,I HOPE THIS WILL HELP YOU TO SOLVE YOUR PROBLEM.
Description
Using the SAPscript Raw Data Interface (RDI), you can connect external text management systems to control individual requests, for example, optimizing postage expense. The interface contains all form data from the R/3 System, but no layout information such as font or page size. The external system alone is responsible for the layout and administration of the document data. The RDI is of special importance for mail processing. The external system sorts the document data from the interface and forwards the documents accordingly.
The Raw Data Interface is a certified interface and allows easy connection to external systems. However, you pay the price for this extra function, as you lose tight integration with the R/3 System. For example, you cannot find out from within an R/3 application whether the external system successfully printed and sent the documents. In addition, extra expense is incurred each time you adapt a standard form, since the system has to adapt both an internal and external form. The external tool is not an integral part of the ABAP Development Workbench, so that field information (field type, output length and so on) from the ABAP Dictionary is not available.
THANKS
MRUTYUN

How can I convert table object into table record format?

I need to write a store procedure to convert table object into table record. The stored procedure will have a table object IN and then pass the data into another stored procedure with a table record IN. Data passed in may contain more than one record in the table object. Is there any example I can take a look? Thanks.

I'm afraid it's a bit labourious but here's an example.
I think it's a good idea to work with SQL objects rather than PL/SQL nested tables.
SQL> CREATE OR REPLACE TYPE emp_t AS OBJECT
2      (eno NUMBER(4)
3      , ename VARCHAR2(10)
4      , job VARCHAR2(9)
5      , mgr NUMBER(4)
6      , hiredate DATE
7      , sal NUMBER(7,2)
8      , comm NUMBER(7,2)
9      , deptno NUMBER(2));
10 /
Type created.
SQL> CREATE OR REPLACE TYPE staff_nt AS TABLE OF emp_t
2 /
Type created.
SQL> Now we've got some Types let's use them. I've only implemented this as one public procedure but you can see the principles in action.
SQL> CREATE OR REPLACE PACKAGE emp_utils AS
2      TYPE EmpCurTyp IS REF CURSOR RETURN emp%ROWTYPE;
3      PROCEDURE pop_emp (p_emps in staff_nt);
4 END emp_utils;
5 /
Package created.
SQL> CREATE OR REPLACE PACKAGE BODY emp_utils AS
2      FUNCTION emp_obj_to_rows (p_emps IN staff_nt) RETURN EmpCurTyp IS
3          rc EmpCurTyp;
4      BEGIN
5          OPEN rc FOR SELECT * FROM TABLE( CAST ( p_emps AS staff_nt ));
6          RETURN rc;
7      END emp_obj_to_rows;
8      PROCEDURE pop_emp (p_emps in staff_nt) is
9          e_rec emp%ROWTYPE;
10          l_emps EmpCurTyp;
11      BEGIN
12          l_emps := emp_obj_to_rows(p_emps);
13          FETCH l_emps INTO e_rec;
14          LOOP
15              EXIT WHEN l_emps%NOTFOUND;
16              INSERT INTO emp VALUES e_rec;
17              FETCH l_emps INTO e_rec;
18          END LOOP;
19          CLOSE l_emps;
20      END pop_emp;
21 END;
22 /
Package body created.
SQL>Looks good. Let's see it in action...
SQL> DECLARE
2      newbies staff_nt := staff_nt();
3 BEGIN
4      newbies.extend(2);
5      newbies(1) := emp_t(7777, 'APC', 'CODER', 7902, sysdate, 1700, null, 40);
6      newbies(2) := emp_t(7778, 'J RANDOM', 'HACKER', 7902, sysdate, 1800, null, 40);
7      emp_utils.pop_emp(newbies);
8 END;
9 /
PL/SQL procedure successfully completed.
SQL> SELECT * FROM emp WHERE deptno = 40
2 /
     EMPNO ENAME      JOB              MGR HIREDATE         SAL       COMM
    DEPTNO
      7777 APC        CODER           7902 17-NOV-05       1700
        40
      7778 J RANDOM   HACKER          7902 17-NOV-05       1800
        40
SQL>     Cheers, APC

How can I Convert a numeric string to a formatted string?

I have a string value returned from a background tool that will range from 0 to possibly terabytes as a full number. I want to format that number to use commas and to reduce the character count using an appropriate size modifier (KiB, MiB, GiB, etc). I've tried converting the string number to a Double value using Double.parseDouble() and then performing the math based on the size of the value with this code:
Double dblConversionSize;
String stCinvertedSize;
dblConversionSize = Double.parseDouble(theValue);
if (dblConversionSize > (1024 * 1024 * 1024))
stConvertedSize = String.format("%,.000d", dblConversionSize / 1024 / 1024 / 1024) + " TiB";
I've also tried using
String.valueOf(dblConversionSize / 1024 / 1024 / 1024) + " TiB";
However, the formatting is failing and I'm either getting a format exception or the result is displayed as a number with no decimal component.
Anyone have a recipe for this?
Thanks,
Tim

TOLIS Tim wrote:
Thanks, but the reason for using Double is that the division math can leave me with values like 2.341 GiB. I don't want to drop the values (or round) on the right side of the decimal point.
Then you may look for DigDecimal which avoids digitization errors.
NumberFormat will handle all subclasses of Number. You might need another specialization. Just look at the API which one is suitable.
bye
TPD

How can I convert my css code into table format?

Wasn't sure how to word the title, but what I am trying to do is post my html code generated with Dreamweaver CS4 into craigslist for an advertisement I designed. Craigslist seems to only accept "TABLE FORMAT". I just learned enough to design this AD using css, now do I have to go back and learn table cell coding? Is there something I am not aware of like a conversion or something that will work?
Thank you very much for any help, I am very anxious to get my ad placed.

Example of the accepted code:
<table border="0" cellpadding="5" cellspacing="0" width="100%" id="table4" align="center">
<tr><td width="125">Contact Name:</td><td>Patrick</td></tr>
You must have an old HTML editor because that isn't INLINE CSS CODE. It's deprecated HTML code. It might work OK on Craig's List... but tags won't pass W3C validation in XHTML doc types.
To express what you have above using inline CSS styles without tables would like this:
Contact Name: Patrick
http://www.w3schools.com/CSS/css_howto.asp
Nancy O.
Alt-Web Design & Publishing
Web | Graphics | Print | Media Specialists
www.alt-web.com/
www.twitter.com/altweb
www.alt-web.blogspot.com

How can i convert if the date in string format

String lFstr = (String) pReq.getParameter("FND");
String lTstr = (String) pReq.getParameter("TND");
String lLstr = (String) pReq.getParameter("LWD");
System.out.println(lFstr + " " + lTstr + " " + lLstr);
//DateFormat ds = DateFormat.getDateInstance();
DateFormat dateFormatter = new SimpleDateFormat("dd/MM/yyyy");
Date lFdate = null;
Date lTdate = null;
Date lLdate = null;
try {
lFdate = dateFormatter.parse(lFstr);
lTdate = dateFormatter.parse(lTstr);
lLdate = dateFormatter.parse(lLstr);
} catch (Exception e) {
System.out.println(lFdate+" "+lTdate+" "+lLdate);
i am getting the values from request parameters at that time it is giving values.
after convertion of string to date it is giving the null value what is wrong in this code

It might have thrown an exception. Try printing the stack trace in the catch block.

How can I convert a video to a playable format?

Similar Messages

Maybe you are looking for