How can I convert an array off byte into an Object ?

Hi folks...
I�m developing an application that comunicates a PDA and a computer via Wi-Fi. I�m using a DataStream ( Input and Output ) to receive / send information from / to the computer. Most off the data received from him is in the byte[] type...
How can I convert an array off byte ( byte[] ) into an Object using MIDP 2.0 / CLDC 1.1 ?
I found on the web 2 functions that made this... but it uses a ObjectOutputStream and ObjectInputStream classes that is not provided by the J2ME plataform...
How can I do this ?
Waiting answers
Rodrigo Kerkhoff

There are no ObjectOutputStream and ObjectInputStream classes in CLDC. You must know what you are writing to and reading from the DataStream. You should write the primitives like int, String to the DataOutputstream at one end and read those in exactly the same sequence at the outher end using readInt(), readUTF() methods.

Similar Messages

  • How can I convert a PDF/A file into a PDF file with Acrobat Pro X?

    How can I convert a PDF/A file into a PDF file with Acrobat Pro X? I'd like to modifiy the file which I have only as a PDF/A.

    There's two answers if you want to modify the file:
    You can temporarily turn off PDF/A Mode in your preferences, so they don't open as read-only. The problem would be if you do something to the file that violated the PDF/A standard, so you should always run a Preflight check afterwards to make sure.
    If you want to remove the PDF/A header tag, use Preflight again - it's on the Print Production Panel in Acrobat X Pro (which may be hidden, use the options menu on the Tools Pane to show it). There's a profile called "Remove PDF/A information" - choose this and press Analyze and Fix. Nothing else about the file will be altered but when you save and reopen it all the editing tools will become active.

  • How can I convert a secure pdf document into word?

    How can I convert a secure pdf document into word?

    Hi,
    Please refer to below mentioned article:
    http://forums.adobe.com/docs/DOC-1515
    ~PRanav

  • How do I convert an array of BYTES (where each BYTE represents a bit) into a single Hex number?

    I am reading a signal from a USB-8451. This signal is stored as an array where each element represents a bit in the signal, but is stored in the array as a byte. How do I convert this array into a single Hex number. I attatched what I have so far, there are a few extra things to help me see what ia going on. One code uses Queue and the other uses arrays, let me know if you can help.
    Attachments:
    845x_EEPROMarrays.vi ‏27 KB
    845x_EEPROM.vi ‏26 KB

    mkssnwbrd wrote:
    ... so we can't introduce any other forms of signals or power into the circuit other than what the circuit already has. Trithfully I don't really know how I2C devices work, but my mentor here says that we can't use an I2C method becuase it will introduce voltage into the circuit and may damage out TCON chip.
    That makes absolutely no sense. What do you think is happening when you write the digital lines? You're setting a pin high. That voltage is being generated by the 8451x. I think you're not understanding what your mentor is saying. If it's an I2C device then you should be able to use the I2C function to simply talk to it. You still have not indicated what the device is, so there's little more I can say about that aspect of it.
    As far as the conversion is concerned, you basically need loop through your array of "bits", taking 16 at time since you said you have 16-bit values. It's not clear from your code whether your eventual goal is to get a numeric value or a string. This does not appear to be a subVI, so a simply numeric indicator formatted to display in hex format should be quite adequate. The array you are generating is an array of rings, whose datatype is I32, but they will have values of 0 or 1. You can use the example just posted, or you can use the attached variation.
    Attachments:
    Bits to Hex 2.vi ‏17 KB

  • How can I convert an array to image(8bit)

    I can convert an array(acquire from usb camera)to a picture,but not images(8 bit grayscale),how can I do it.many thanks!
    Attachments:
    array to image.vi ‏249 KB

    Sorry, this is the kind of thing that happens when you have been out for too long.
    Message Edité par chilly charly le 10-22-2006 11:09 AM
    Chilly Charly    (aka CC)
             E-List Master - Kudos glutton - Press the yellow button on the left...        
    Attachments:
    array%20to%20image[1].png ‏3 KB

  • How can I convert an array with varying length into a cluster

    Hi,
    I need to convert an array of n elements into a cluster. Usually, it only involves the "Array to Cluster" function. But since the array length is not constant and the number of elements in the function is constant and can not be changed programaticaly, I need to find another way to do that.
    Any ideas?
    Thanks.

    Hi,
    I also tried to do this but without success. I think that's not possible.
    For me it's a general problem using labview. I often wanted to generate standard controls dynamically which is not possible (or I haven't found the solution yet). So I think that's the reason why you can't create a cluster during runtime (the program would have to add controls dynamically to the cluster).
    Do you have an upper limit for your array-size? Although it needs a lot more memory, it would be a possibility to create the cluster with the maximum number of elements.
    If you don't have a maximum, you will have to look for another way, I'm afraid.
    Thomas
    Using LV8.0
    Don't be afraid to rate a good answer...

  • How can I convert an audio file (speech) into a text?

    Hello everybody!
      Can someone explain how I can convert a garageband file (voice speech) into a text? My Mac is a Mac OS X 10.5.8 version, so I don't have programs such as mountain Lion. I thought to use googlevoice. Is this option available? If yes, how can I use it?
    Thanks.

    Hello, I only find google voice available for Abdroid!?
    http://www.ehow.com/info_10033225_google-voice-system-requirements-android.html
    Some possibilitities, not sure if they have 10.5.8 compatble versions anymore...
    http://atmac.org/speech-to-text-dictation-software-for-os-x
    Some reviews of later Dragon Speak...
    http://www.finetunedmac.com/forums/ubbthreads.php?ubb=showflat&Number=22962

  • How can I convert borland pascal 6-byte real value to labview type

    while attempting to convert a 6-byte borland pascal real number to a LabVIEW data type, I get strange results. Does anyone have previous experience with this?

    Your problem may be in how the two different environments store the number. I'm not sure how 6-byte pascal number is stored - here is some info on how doubles are stored in LabVIEW.
    http://zone.ni.com/devzone/conceptd.nsf/2d17d611efb58b22862567a9006ffe76/370dfc6fd19b318c86256a33006bfb78?OpenDocument
    Chris_Mitchell
    Product Development Engineer
    Certified LabVIEW Architect

  • How can I convert an array to a waveform in signal express

    hello friends,
    I have imported a labview VI in signal express. After processing the data in VI , I have stored the result in a form of array. Now I want to see this array in a form of waveform in signal express. How to go about it. 
    Vipin

    Sorry, this is the kind of thing that happens when you have been out for too long.
    Message Edité par chilly charly le 10-22-2006 11:09 AM
    Chilly Charly    (aka CC)
             E-List Master - Kudos glutton - Press the yellow button on the left...        
    Attachments:
    array%20to%20image[1].png ‏3 KB

  • How can I convert an array into a .wav file?

    I have an array of points that I need converted and written into a .wav file. Any help?

    Indeed there is!
    Look at the attached vi....that's about all there is to it!
    Good Luck..
    Eric
    Eric P. Nichols
    P.O. Box 56235
    North Pole, AK 99705
    Attachments:
    ARRAY_TO_WAVE.vi ‏17 KB

  • How can I convert the old AppleWorks files into a modern useable format?

    I've been using Mac computers for many years. The most important application (to me) was AppleWorks. But now I have learned that if I upgrade
    to Lion all my Appleworks files will be lost.  I have searched in many places for the "How to convert AppleWorks files to some format that WILL
    be supported by Apple.  I see no information on the Apple website and when I speak to a support person, I am always told that AppleWorks is
    so very old, it was not included in their training so they cannot tell me anything.  The little bits of advice I did get caused all my 20,000 AppleWorks
    files to be moved into my LaCie terrabyte external storage file, and at the same time the old files remain in my Macintosh Hard Drive. But in both
    places, those files cannot be read any more, and the nicely organized work I had done, was all gone. I mean - my AppleWorks files were always
    grouped by folders into special interest sections.  Now those folders don't exist and everything is in disarray - and unreadable. The titles of each
    file is now greyed out.  I have tried
    to make the transfer in Bento3 but mostly in iWork06.  I was told by Apple staff NOT to buy a higher iWork such as 09 because they are too
    far removed from the old AppleWorks to be able to do anything with it.  So I've stuck to iWork06 with no success.  Also, I went to my favorite
    privately owned Apples store and found all their instruction manuals and DVD application files MISSING. Their shelves are empty. I was told
    the new way is to order off the internet but....I'd far rather go into a shop and see all they offer for sale.  If I had gone there to buy ONE item,
    I'd drive away with THREE items, because getting my hands on items was the important way to understand what the value and purpose
    of that item is.
    To summarize: I have installed iWorks06 with no written information about it.  I have iWork08 with an instruction book which never never
    mentions AppleWorks, so I have not installed iWork08.  I have Bento3 installed, but no instruction book.  So I haven't learned or tried anything
    because it too never speaks of AppleWorks transfer.  Some of my AppleWorks files are extremely important to me. Not just personal or
    social but BUSINESS!  I won't be able to answer the tax man should he come a-knocking on my door.   HELP!!

    So what kinds of files are they? Word processing docs, from the painting Appleworks app, or spreadsheets?
    This is how I've handled it:
    Anything word processing: should be able to import them (drag them in or import) into Pages. Worked here.
    Spreadsheets: Used File > Open to open an AW spreadsheet. Needs a few adjustments, but I was able to tailor Numbers to get my spreadsheets the way I wanted them. Just experimented for a while with a non-essential spreadsheet until I figured out what to do.
    Painting: That is the one I used the most (and continue to do so): Cannot be read by any iWork. If your doc is a finished product, simply save it as a .pdf or .jpg and then you can drag it into Pages. If it is not, then you are out of luck. I am keeping a partition with a bootable Snow Leopard system with Appleworks on it in order to be able to keep creating my stuff because I've not been able to find a somewhat equal substitute.
    So, keeping SL on a partition and/or an external drive is one option if necessary.

  • How can I convert a pdf or .doc into a url

    I want to link a pdf file to a word on a website. I think the easiest way would be to link a url address but I do not know how to get a url address from a pdf or I do not know where the url address can be found. Can anyone help me with this?

    Hi, Chartla2012.
    I would suggest you speak to the IT department or service which is hosting your website. Your question is not exactly related to our CreatePDF service.
    You can include links in PDF files. Those links can go to any Internet-hosted content, including Word files. In this way, you could have a user open a PDF file in his browser and click on a link in the PDF which will in turn open a Word file.
    Dave

  • How can I change an American Itunes Card into a UK one?

    So I found this cool version of Genroku Hanami Odori by a group called Waraku Ensemble, but it's only avalible in the UK stores and I live in the US. How can I convert an American Itunes card into a UK card?

    I was asking if there was a way to convert an American Card into a UK card
    Trade with sombody who has the opposite issue.

  • How can I convert output data (string?) from GPIB-read to an 1D array?

    Hello all,
    I am reading a displayed waveform from my Tektronix Oscilloscope (TDS3032) via the GPIB Read VI. The format of the waveform data is: positive integer data-point representation with the most significant byte transferred first (2 bytes per data point).
    The output data of GPIB-Read looks like a string(?) where the integer numbers and a sign like the euro-currency sign are seperated by spaces e.g. #5200004C3 4 4 4 4 3C3C3........ (C represents the euro-currency sign).
    How can I convert this waveform data into a 1D/2D array of real double floatingpoint numbers (DBL) so I can handle the waveform data for data-analysis?
    It would be very nice if someone know the solution for this.
    t
    hanks

    Hi,
    First of all, I'm assuming you are using LabVIEW.
    The first you need to do is parse the string returned by the instrument. In this case you need to search for the known symbols in the string (like the euro sign) and chop the string to get the numeric strings. Here are some examples on parsing from www.ni.com:
    Keyword Search: parsing
    Once you parse the numeric strings you can use the "String/number conversion VIs" in the String pallette.
    Hope this helps.
    DiegoF.Message Edited by Molly K on 02-18-2005 11:01 PM

  • How can I convert stream to byte and byte to stream

    I got a IInputStream from BackgroundDownloader operation, how can I convert it to byte array? I try to convert it to buffer and after that to bytes, but it's always throw exception.
    function decryptStream(inputStream, totalBytes) {
    var reader = new Windows.Storage.Streams.DataReader(inputStream);
    var iBuffer = reader.readBuffer(totalBytes);
    var bytes = Windows.Security.Cryptography.CryptographicBuffer.copyToByteArray(iBuffer);
    Could I have examples about that?

    Hi Jeft,
    In my program, I have a BackgroundDownloader to download an image. When we have result, I will convert it to bytes array.
    if (p.hasResponseChanged && imageStream == null) {
    imageStream = operation.getResultStreamAt(0);
    if (!p.hasResponseChanged && imageStream != null) {
    decryptStream(imageStream, p['bytesReceived']);

Maybe you are looking for