How can i debug specail function for VA01

How can i debug specail function for VA01,For example, I establish one and export type ZA01, the procedure code is ZRVADOR01, how do I debug this procedure?
thank you!

First you keep a break point in the program
Step#1.
RSNAST00 (on the below mentioned code).
PERFORM (TNAPR-RONAM) IN PROGRAM (TNAPR-PGNAM) USING RETURNCODE
US_SCREEN
IF FOUND.
and now in VA01 , just start Debugging after you choose the Output type using /H at the command.
now you will see the Debugging , now choose the menu Settings->Update Debugging
this will activate the Update Debugging.
Now Press F8. now another window will open , in that you it will stop near the break point in the step 1 .
It will take you to the corresponding program/
Now you Debug and check what ever you want

Similar Messages

How can I debug a Function Module used by smartforms

Hello everyone,
i have a problem with the function module /1BCDWB/SF00000040.
It's a module executed from a smartforms form. I need to debug this
function module while printing an invoice. While printing it should jump
to the place of the function module.
Would be grateful if someone could help me.
Best regards
F. Hoppe

This is exactly what i have done last time.
The problem is that the breakpoint does not stay at the same place
when i activate it in the module itself.
Isn't there a transaction you can put breakpoints specific to a FM?

How can I implement this functionality for button in Captivate.

Hello Everyone
I want to create a button with same functionality as on mobile.
If the button is clicked for first time it will type in "2".
Second time "a"
third time "b"
fourth time "c"
then again circles back to 2.
Thanks in advance if anyone can point us to the right direction.
Cheers, JagVWS

Which version are you using? It will be less cumbersome in the latest version, because you can copy/paste decisions.
You can have a look at this blog post, it is not cycling text containers (which will be your case) but images. The logic is the same, bit different from Rod's explanation because I'm resetting the counter to 0 after each cycle. That way you need only one user variable (I'm trying to limit work). Probably you will not want to show an extra button after the first cycle, but that is easy to skip.
http://blog.lilybiri.com/blog-after-posterous-clickclick
Lilybiri

How can i use reuse_alv_fieldcatalog_merge function module

I am using below steps for populating the final internal table.How can I use reuse_alv_fieldcatalog_merge function module in the place of declaring all these fields.How canI put title of the report in reuse_alv_fieldcatalog_merge function module.
FORM BUILD_FIELDCATALOG .
FIELDCAT-TABNAME   = 'IT_FINAL'.
FIELDCAT-FIELDNAME = 'KUNNR'.
FIELDCAT-SELTEXT_M = 'Customer Name'.
FIELDCAT-JUST      = 'L'.
FIELDCAT-KEY       = 'X'.
FIELDCAT-DATATYPE = 'C'.
APPEND FIELDCAT TO I_FIELDCAT.
CLEAR FIELDCAT.
FIELDCAT-TABNAME   = 'IT_FINAL'.
FIELDCAT-FIELDNAME = 'VBELN'.
FIELDCAT-SELTEXT_M = 'Invoice Reference'.
FIELDCAT-JUST      = 'L'.
FIELDCAT-KEY       = 'X'.
APPEND FIELDCAT TO I_FIELDCAT.
CLEAR FIELDCAT.
FIELDCAT-TABNAME   = 'IT_FINAL'.
FIELDCAT-FIELDNAME = 'VKBUR'.
FIELDCAT-SELTEXT_M = 'Sales Office'.
FIELDCAT-JUST      = 'L'.
FIELDCAT-KEY       = 'X'.
FIELDCAT-DATATYPE = 'C'.
APPEND FIELDCAT TO I_FIELDCAT.
CLEAR FIELDCAT.
FIELDCAT-TABNAME   = 'IT_FINAL'.
FIELDCAT-FIELDNAME = 'VKGRP'.
FIELDCAT-SELTEXT_M = 'Sales Person'.
FIELDCAT-JUST      = 'L'.
FIELDCAT-KEY       = 'X'.
FIELDCAT-DATATYPE = 'C'.
APPEND FIELDCAT TO I_FIELDCAT.
CLEAR FIELDCAT.
FIELDCAT-TABNAME   = 'IT_FINAL'.
FIELDCAT-FIELDNAME = 'POSNR'.
FIELDCAT-SELTEXT_M = 'Item No'.
FIELDCAT-JUST      = 'L'.
FIELDCAT-KEY       = 'X'.
APPEND FIELDCAT TO I_FIELDCAT.
CLEAR FIELDCAT.
FIELDCAT-TABNAME   = 'IT_FIANL'.
FIELDCAT-FIELDNAME = 'ARKTX'.
FIELDCAT-SELTEXT_M = 'Item Description'.
FIELDCAT-JUST      = 'L'.
FIELDCAT-DATATYPE = 'C'.
APPEND FIELDCAT TO I_FIELDCAT.
CLEAR FIELDCAT.

Hello,
It is very easy to use reuse_alv_fieldcatalog_merge.
You try this it will work.
example
data:
DATA : gv_repid        TYPE syrepid VALUE sy-repid . " Report id
PERFORM set_field_catalog USING gst_struct CHANGING lst_fieldcat.
FORM set_field_catalog USING uv_tab TYPE slis_tabname
                     CHANGING xt_fieldcatalog TYPE slis_t_fieldcat_alv.
CALL FUNCTION 'REUSE_ALV_FIELDCATALOG_MERGE'
    EXPORTING
      i_program_name         = gv_repid
      i_internal_tabname     = uv_tab
      i_inclname             = gv_repid
    CHANGING
      ct_fieldcat            = xt_fieldcatalog
    EXCEPTIONS
      inconsistent_interface = 1
      program_error          = 2
      OTHERS                 = 3.
IF sy-subrc <> 0.
    MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
            WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
ENDFORM.                    " set_field_catalog_spec

HT3354 how can i use one table for reference to another

how can i use a table for a referance to another eg when i type a word in a cell, i will like it to match the word with another table then return the information in the cell i am using

you can use vlookup() (or any of the lookup family of functions) to locate an item based on a key value:
Here is an example of something you can do with two tables:
The table on the right is title "Data" and stores a list of names with age and favorite color.
The table on the left uses the value in the first column to lookup up information in the table Data
in the table on the left:
B2=IFERROR(A2&" is " & VLOOKUP(A2, Data :: A:D, 2, 0)&" years old and likes the color "& VLOOKUP(A2, Data :: A:D, 3, 0), "NOT FOUND")
I know this look complicated. so I'll break it up into smalled pieces:
first the "&" is called the concatenate operator and joins two strings. like this:
a string is a set of characters between double quotes.
so "string 1" & "string 2" becomes "string 1string2" or "Sam " & "Jones" becomes "Sam Jones"
you can use cell references instead of strings directly in which case the concatenation is performed on the contents of the cells.
so if cell A1 contains "Hi " and the cell A2 contains "There" then A1 & A2 will result in "Hi There"
so you could add the formula
A3=A1 & A2
this is short hand for select cell A3 then type everything including the A3 so that A3 contains "=A1 & A2" (omit the double quote)
OK. So the formula I provided concatenates several items together:
it concatenates A2, then the string " is " then a formula, then the string " years old and likes the color " then a formula
the two formulas (highlighted in blue) perform a lookup of the value in cell A2 in columns A thru D of the table named "Data". If if finds the value in cell A2 in the first column of the lookup range in the table Data (column A) then it returns the value from the same row but in the second or third column.
all that is in a function calld iserror() to trap the condition where the calue you enter in A2 does not exist in the table Data:
You will find the Numbers users guide and function reference helpful. You can download then from Apple here:
http://support.apple.com/manuals/#productivitysoftware

How to Use the language function for assignment and validation

Hi All,
If anyone can explain me in details with example ,how to use the language function for assignments and validations?
Thanks
Arnab

Hi Arnab,
The expression is checked only for the current MDM session.
If u login with the ABC language it will always show the ABC language no matter how many times u execute it.
Try connecting to the DM with the XYZ language.
It should go to the if part rather than else.
Hope it helps.
Thanks,
Minaz

How can I create a function of sound volue from time using AudioQueueBufferRef??

I have a question how can I analyze class AudioQueueBufferRef, for creating a function of sound volue from time?? Here is what I get . there is AudioQueueBufferRef fillBuf = audioQueueBuffer[fillBufferIndex]; volume height is 2000 elements from SInt16* coreAudioBuffer = (SInt16*)fillBuf->mAudioData. so function looks like H(t*i)=coreAudioBuffer[i] where t = 1/sampleRate = 1/22050 but here is a problem. my program gets sound and uses a class AudioStreamer for this. AudioStreamer has 3000 lines when I play music from Free Internet Radio - SHOUTcast Radio - Thousands of Free Online Radio Stations. internet radio - my problem is as follows either I dont know where 85 % of sound information is or I dont know how I can analyze class AudioQueueBufferRef
Here is the code where I analyze Buffer.
{@synchronized(self)
if ([self isFinishing] || stream == 0)
return;
inuse[fillBufferIndex] = true; // set in use flag
buffersUsed++;
// enqueue buffer
AudioQueueBufferRef fillBuf = audioQueueBuffer[fillBufferIndex];
fillBuf->mAudioDataByteSize = bytesFilled;
// ======>in this place I analyze Buffer
if (packetsFilled)
err = AudioQueueEnqueueBuffer(audioQueue, fillBuf, packetsFilled, packetDescs);
else
err = AudioQueueEnqueueBuffer(audioQueue, fillBuf, 0, NULL);
when bitRate = 24 buffer has the following options int size=(fillBuf->mAudioDataByteSize) == 2000 double sampleRate=asbd.mSampleRate == 22050 numberOfChannels = asbd.mChannelsPerFrame == 1 it turns out that duration of play buffer float bufferTime =(size/numberOfChannels)/sampleRate == 0.1 number of buffers per second float numBuffersInOneSeconds == 1,5 duration of play all buffers per one second numBuffersInOneSeconds * time == 0.15 so it is 15 % of all information
as a result If buffer comes at 0.0 seconds he lasts up to 0.1 seconds.farther in my function there is no volume. second buffer comes in 0.7 seconds and lasts up to 0.8 seconds. but in reality the sound doesnt breaks. Maybe I'm doing something wrong .please tell me.
just for comparison
when bitRate = 32 buffer has the following options int size=(fillBuf->mAudioDataByteSize) == 2000 double sampleRate=asbd.mSampleRate == 22050 numberOfChannels = asbd.mChannelsPerFrame == 1 it turns out that duration of play buffer float bufferTime =(size/numberOfChannels)/sampleRate == 0.1 number of buffers per second float numBuffersInOneSeconds == 2 duration of play all buffers per one second numBuffersInOneSeconds * time == 0.2 so it is 20 % of all information
when bitRate = 32 buffer has the following options int size=(fillBuf->mAudioDataByteSize) == 1660 double sampleRate=asbd.mSampleRate == 44100 numberOfChannels = asbd.mChannelsPerFrame == 2 it turns out that duration of play buffer float bufferTime =(size/numberOfChannels)/sampleRate == 0.02 number of buffers per second float numBuffersInOneSeconds == 10 duration of play all buffers per one second numBuffersInOneSeconds * time == 0.2 so it is 20 % of all information

You cannot write custom commands for expressions.
That being said, there are a couple of options:
Create a subsequence with a single step. Use a parameter of the sequence as "function parameter".
Create a custom step type including a substep module which implements the function. Add an edit substep to enable the user of the steptype to gracefully change the parameter.
Store the variable parameter in a local/file global variable and modify the value in each step. This will, at least, keep the "function" the same for every step.
Norbert

How can I debug a routine created in Deletion of similar requests?

Hello Experts,
I need some help from you. I need to delete overlapping requests and the common
settings you can set are not suitable, so I decided to write my own ABAP routine.
But how can I debug a routine, which is implemented in the deletion of similar requests?
Hope you can help me.
Cheers
Daniel Weilbacher

Please go to the routine code..
In the menu options..u will find an option for breakpoint--set..
The line where breakpoint is set will get highlighted and u will also see a STOP symbol..
then come out of routine..and then run the data load..
this ABAP routine for overlapping request deletion runs before the scheduled data load..
the run shud stop at the set breakpoint and show the routine code..in debugger mode..
cheers,
Vishvesh

How can I debug a sequence that has a subsequence is running in a separate thread?

Hi,
How can I debug a sequence that has a subsequence is running in a separate thread?
I have to have a continues check for a digital in signal to be able to terminate the sequence if a physical button is pushed.
This is running in a separate thread, but this way I cannot debug the main sequence.
Is there any workaround for this?
Thanks,
Andras

This KB might help you:
http://digital.ni.com/public.nsf/websearch/46D1E157756C37E686256CED0075E156?OpenDocument
Let me know if this does not help.
Allen P.
NI

How can I use 3D function in Photoshop CS6 (student package)?

Please let me know how can I use 3D function in Photoshop CS6 (student package)?
Thanks,

Thanks so much for your helpful reply.
Now I' ve already installed Adobe Creative Suite 6 Production Premium (Student Package), Extended included. But when I open Photoshop CS6, there' s still no 3D function in menu bar.
Would you please tell me how to activate this function?
Thanks,

How can I get file list for a given directory?

Hi,
How can I get file list for a given directory? Is there a function?
Thanks.

Hi friend,
Try this sample report. It displays all files in a directory.
While executing give some directory name in input. ex: C:\
Mention file type in filter parameter. ex: *.DOC
REPORT ztests.
DATA : file_table LIKE TABLE OF sdokpath WITH HEADER LINE .
DATA : dir_table LIKE TABLE OF sdokpath WITH HEADER LINE .
PARAMETERS:p_dir(50) TYPE c.
CALL FUNCTION 'TMP_GUI_DIRECTORY_LIST_FILES'
EXPORTING
    directory = p_dir
    filter     = '*.DOC'
TABLES
    file_table = file_table
    dir_table = dir_table
EXCEPTIONS
    cntl_error = 1
    OTHERS     = 2.
LOOP AT file_table .
WRITE:/ file_table-pathname.
ENDLOOP.
Might be helpful...
Thanks.....
Edited by: Guest77 on Feb 11, 2009 5:30 AM

Can I use "dvt" function for customizing the chart format in OBIEE 11g?

Hi,
".pcxml" file cannot be found in OBIEE11g. However, can I use "dvt" function for customization? If yes, how?
Reference for dvt function:
http://docs.oracle.com/cd/E23943_01/apirefs.1111/e12418/tagdoc/dvt_pieGraph.html

Hello,
I know it's possible, because i already found some blogs about changing the chart colors and turning off the animated graphs.
<Graph visualEffects="NONE" animationDuration="0">
But we want to alter more chart options, like make a bar chart default stacked. In 10G this was possible. I think this is also
possible in 11G through the dvt-graph-skin.xml, but what i want to know is, is there a document that explains which tags you could use in this file.
It would be great to get some help on this.

How can i use this function module

Hai
How can i use this function module /SAPHT/SALES_ORDER_READ, already apply the some parameters in this function module, but it shows the error , please tell me, how to declare the parameters in this function module ,
thanks
neelima

Hi
For a particular sales order,you have to pass the order number and the item number in the sales order.
It will display the rest of the values which u can capture them using internal tables.
Regards,
Vishwa.

How can i get best practice for SD and MM

Please, can any body tell me how can i get best practices for SD and MM for functional approach?
Thanks
Utpal

Hello Utpal,
I am really surprised, in just 10 minutes you searched that site and found it not useful. <b>Check out my previous reply "you will not find screen shot in this but you can add it in this"</b>
You will not find readymade document, you need to add this as per your requirement.
btw, the following link gives you some more link for new SAP guys, this will be helpful. <b>Check out HOW to BASIC transaction</b>
New to Materials Management / Warehouse Management?
Hope this helps.
Regards
Arif Mansuri

How can i calcilate cost depreciation for assets

Hi.
can anybody tell me how can i calculate
cost depreciation for an asset.
i have used one function module DEPR_RECALCULATE.
but it will allow only one date and it will calculate depreciation for total year .
i want to pass the two date .
how can i calculate depreciation between two periods.

Hi,
Check this FM: AM_ASSET_DEPR_CALCULATE
Regards
Kannaiah

How can i debug specail function for VA01

Similar Messages

Maybe you are looking for