How Can I Delete all Time Machine Backup From Computer Hard Drive?

Can somebody help me on this. I don't want to use time machine anymore because i have low volume External hard Drive(500GB) only but want to do manual buckup.

Hi,
If you no longer want to use the Ext Drive with TM...
Turn TM Off and Erase the Ext Drive using Disc Utility...
Cheers,  
If you need more detail... See this Older Discussion:
https://discussions.apple.com/message/7185763#7185763

Similar Messages

  • How can I copy a time machine backup from one Time Capsule to another ?

    How can I copy a time machine backup from one Time Capsule to another ? I bought a 1 Tb Time Capsule to replace my 512Mb Time Capsule. Now, I like to copy my time machine backup from the old Time Capsule to the new one so I can keep using my backup.

    from this support article: 
    (click on image to enlarge)

  • How can I use the Time Machine Backups from my Old Computer?

    I have two months of Time Machine backups made using my old Macintosh computer which died and I no longer have. I have now purchased a new computer and am trying to use the Time Machine back ups from the original computer, but it will not recognise them. How can I get my new MacBook Pro to use the Time Machine Backups from my old Computer? I phoned the Apple help line and they said I cannot use them and would have to delete them. This sounds crazy if you can only use the Time Machine back up file with one computer and have to delete it when you buy a new Mac. Surely there must be some way to transfer ownership (not files) from an old to the new Mac?
    Thanks
    Richard

    Thanks Kevin for the suggestion posted on MacOSXHints how to "Repair Time Machine after logic board changes".
    http://www.macosxhints.com/article.php?story=20080128003716101
    It seems as though I am not alone with my frustration with the way Time Machine uses the MAC address of a computer to tell one system from another. This means that if you have your Mac repaired with a new logic board, or replace your system with a new one, you can't resume backups where you left off. Reading through the readers who used the fix using Terminal, it appears that the fix does not always work. I contacted Apple again, but they were no help. Surely Apple should come out with a solution as more and more people use Time Machine/Time Capsule.
    It is CRAZY that after a change computers or a switch in the computer logic board that you cannot resume your Time Machine back ups.

  • How can I remove all Time Machine data from an external HD, while retaining the other folders/files on the disk?

    I recently replaced my old Macbook Pro with a new Macbook Pro Retina.
    The original MBP had Time Machine set up on an external HD, and I also had some manually saved/backed up files (stuff that didn't need incremental backups; very old stuff) on the disk as well, in folders.  This worked fine and well for the life of the original MBP.
    When I set up the MBPr, I did not elect to transfer everything over from a Time Machine disk, as I wanted a Fresh Install; I chose to just re-download/install the apps  I needed from the App Store.  Much cleaner, more stable.  I updated to Yosemite immediately so, it gave me more of a  clean install.
    The problem is, Time Machine now won't read any Time Machine backups from that disk.  Migration assistant can pull data from it, but it's a bit wonky.  It was easier to just manually copy over what I needed.
    Now, I just want to "reset", and completely remove the old Time Machine data from the external hard drive, since it is completely useless to me now (I can't access it on this computer, and it's taking up space).  I want to remove the Time Machine data, as if it were never there, but keep my other folders/files that are on the disk (so, a format is not feasible).
    I will then set the disk up as a new, fresh Time Machine disk for the new MBPr. 
    What is the proper method for removing Time Machine data from an external disk (which doesn't seem to be associated with this machine anyway)?  I know a simple rm -rf will cause problems.
    Thanks for any help provided.

    See the yellow box in #12 of Time Machine - Frequently Asked Questions (or use the link in *User Tips* at the top of this forum).

  • Can I transfer Time Machine Backup from WD Hard Drive to Time Capsule?

    I have a Western Digital 500 Gb. Hard drive and recently purchased a 500 Gb.Time Capsule which, at the moment, am using only for the AirPort feature. I would like to use Time Capsule for my Time Machine backups and use the Western Digital drive as my Aperture Vault. Is there a way to move the Time Machine file from the WD drive to the Time Capsule drive so that I don't lose the old files? My Time Capsule is connected to my iMac via an Ethernet cable.

    Unfortunately, no. Time Machine will backup to a local drive (e.g. via USB or FW HDD) using a folder structure. When backing up to a NAS (e.g. Time Capsule or USB HDD connected to a TC or Extreme), TM utilizes a sparsebundle. You cannot easily convert a folder structure to a sparsebundle. The best plan is to start a NEW backup to TC. Connecting via ethernet is highly recommended for the initial backup.
    P.S. You can still access the old TM backups until such time that you want to reclaim the use of the HDD.

  • How can I delete a Time Machine backup which did not complete?

    I was running a Time Machine backup when the disc got unmounted. Therefore I know all of the data is not backed up.
    I would like to delete that entry and rerun "Back Up Now" to start over.
    I tried deleting the folder with the latest time stamp on the drive and ran "Back Up Now". There was a very small amount of data that it then backed up.
    Obviously there is a large gap in manually managing this process and I would like to know the best fix.
    Thanks in advance.

    Please triple-click anywhere in the line below on this page to select it:
    tmutil compare | open -ef
    Copy the selected text to the Clipboard by pressing the key combination command-C.
    Launch the built-in Terminal application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
    Paste into the Terminal window by pressing the key combination command-V. I've tested these instructions only with the Safari web browser. If you use another browser, you may have to press the return key after pasting.
    Wait for a new line ending in a dollar sign (“$”) to appear below what you entered.
    A TextEdit window will open with the output of the command. Each line that begins with a plus sign (“+”) represents a file that has been added to the source volume since the last snapshot was taken. These files have not been backed up yet.
    Each line that begins with an exclamation point (“!”) represents a file that has changed on the source volume. These files have been backed up, but not in their present state.
    Each line that begins with a minus sign (“-“) represents a file that has been removed from the source volume.
    Files that you’ve excluded from backup, or that are excluded automatically, are ignored.
    At the end of the output, you’ll get some lines like the following:
    Added:
    Removed:
    Changed:
    These lines show the total amount of data added, removed, or changed on the source(s) since the last snapshot.
    Caution: Under some conditions, tmutil may falsely flag files as not having been backed up when in fact they have been. It can be confused by multi-linked files, or by files with a modification date earlier than the one in the snapshot. This will not be an issue for most users. If the results of the above procedure surprise you, inspect your snapshots directly.

  • HT201250 How can I migrate a Time Machine backup from an external hard drive to a new TimeCapsuls?

    I just got a 2TB Time Capsule.  I want to migrate my time machine backups on an external hard drive to the new Time Capsule.  I have about 430Gb of files to back up; I don't want to wait 7-8 days for the backup, unless I have to.  I am using OS 10.7.5 (forget which cat that is).  I have mounted the TC drive as 10.0.1.1; I tried to drag and drop from old to "data" on TC, but I get the error "The volume is the wrong format for a backup."  Any ideas how I can move my old files to the new, and bypass creating a brand new backup file?
    Thanks.

    Rather than do that, which means starting over from scratch, losing all your edits, organisation and so on, why not simply use iPhoto Library Manager to revert the Library to the older version? Easier, less destructive.
    The instructions on that are here
    If you really want to start over: you can access the Originals folder simply by going to your Pictures Folder and finding the iPhoto Library there. Right (or Control-) Click on the icon and select 'Show Package Contents'. A finder window will open with the Library exposed.

  • Need to delete old time machine backups from a external drive

    was using a 500 gb external drive for time machine so when i upgraded to time capsule 2 tb i just started all over basically. i have these back ups abd videos i wanted to delete from the toshiba dr but appear and attempt to erase securely everytime i need to connect the toshiba to my mac to transfer stuff. i want to use this disk with whats on there like videos and music but i cant seem to figure out how to delete these backups...

    Don't try to transfer any old backups to your new TC TM backup drive. Just create a new complete backup. I hope you aren't someone that is trying to store files in a TM backup that you have deleted from your internal hard drive. That is not what TM is for and eventually those deleted files will be removed/deleted from the TM backups.

  • How to remove a encrypted Time Machine partition from external hard drive?

    I encrypted my Time Machine partition and i want to delete it and make a whole new Time Machine partition that isn't encrypted, please help.

    Launch disk utility
    Click on the name of the disk (not the partition) in the left hand pane
    Click on the partition tab (top center)
    Click on the partition to delete
    Click the - sign under the partition layout pane

  • How Can I Migrate My Time Machine Backups To A New External Hard Drive?

    I have a external hard drive that has 500 GBs left, but I want to buy a larger drive.

    ivan wrote:
    How Can I Migrate My Time Machine Backups To A New External Hard Drive?
    I have a external hard drive that has 500 GBs left, but I want to buy a larger drive.
    Hi iVain
    Fire up *Disk Utility*, click the Restore tab, then drag your old and new TM drives into the Source and Destination fields. Click Restore, and a complete copy of your old TM files will be made on the new drive. Go to TM preferences and select the new drive, and it will continue backing up just as it left off.
    Hope this answers your question. See:
    http://discussions.apple.com/thread.jspa?threadID=2595485&tstart=0

  • I am trying to delete a Time Machine backup from a Time Capsule.

    I am trying to delete a Time Machine backup from a Time Capsule.  The file is about 400GB and my MacBook has been trying to delete it for 5h now. It still says "deleting" but has not given me a "time remaining" yet. Any idea of what I could do????

    You should not attempt to delete backups using the Finder. The result can be a corrupted backup.
    I recommend you let it complete, no matter how long it takes. That could be days, if your TC is connected via wireless.
    It is not necessary to delete backups, since Time Machine will delete old backups some time after they have been deleted from your source volume. For more information read Apple Support Communities contributor Pondini's explanation here: Should I delete old backups? If so, How?

  • I am running out of memory on my hard drive and need to delete files. How can I see all the files/applications on my hard drive so I can see what is taking up a lot of room?

    I am running out of memory on my hard drive and need to delete files. How can I see all the files/applications on my hard drive so I can see what is taking up a lot of room?
    Thanks!
    David

    Either of these should help.
    http://grandperspectiv.sourceforge.net/
    http://www.whatsizemac.com/
    Or search 'disk size' in the App Store.
    Be carefull with what you delete & have a backup BEFORE you start, you may also want to reboot to try to free any memory that may have been written to disk.

  • Remove all time machine backups from a certain date and backward

    Right, so here's what I want to do: I want to navigate back to a specific date -- for arguments sake let's say June -- and remove all time machine backups from that date and earlier. Is there an easy way to do so without going through every entry in time machine and "removing backup"?
    I want to migrate my time machine backups to a new drive, but realize I don't really need EVERYTHING here since its for an older machine. So what I'd like to do is get my rather large 1.5 TB time machine backup down to a more manageable size and then migrate it to a new drive.

    I don't recommend deleting Time Machine snapshots. If you have multiple backup volumes, which you should have, and you need to repurpose one of them, you should just erase it. But if you want to try it anyway, and if you're running OS X 10.8 or later (not any older version), see below.
    Don't attempt this procedure unless you have at least one other complete backup of all the data. You should have another backup anyway — one is never enough to be safe.
    Navigate in the Finder to your backup disk, and then to the folder named "Backups.backupdb" at the top level of the volume. If you back up over a network, you'll first have to mount the "sparsebundle" file containing your backups by double-clicking it. Descend into the folder until you see the snapshots, which are represented by folders with a name that begins with the date of the snapshot. Drag the ones you don't want to the Trash and empty. Sometimes, for unknown and unpredictable reasons, the Trash will fail to empty with a cryptic error message. I don't know of any way to recover from that condition except to erase the backup volume and start over.

  • How can I delete all of my contacts from my iphone? I have updated my contact list in Outlook, and need to re-import that "clean" list.

    How can I delete all of my contacts from my iphone? I have updated my contact list in Outlook, and need to re-import that "clean" list.

    There is a checkbox on the 'info' tab in iTunes that will allow you to overwrite the address book on the phone with the one from the computer on the next sync.

  • How can I delete ALL photos at once from iPad 1 (OS 5.1.1) ?

    How can I delete ALL photos at once from iPad 1 (OS 5.1.1) ?

    Weird but I can't see "Photos & Camera" in "Settings / / General / usage".
    It's werid because I have pictures on the iPad.
    I'm thinknig to complete delete everything and restore system.
    Any other suggestions ?

Maybe you are looking for

  • RH8 importing RH7 project

    When trying to open a RH7 project in RH8 I get the following errors: Error in reading RHFrameStyleMappings.apj file Open Project was cancelled or the application was unable to load database for: PatMob.cpd Any ideas ? Thanks, Tom Whelan eTrainMedia,

  • Connecting Canon MG5350 to MacBook with WLAN

    Hello! I just bought a Canon MG5350 and I tried to connect it with my MacBook which runs in iOS 10.6.8, using the wireless network. During the last step of the instalation, I am getting the message: no printer is dectetable. I checked the WLAN settin

  • Adding Freight costs

    Hi folks, I have a requirement where I have to add freight costs to a delivery. I am using the following code. DECLARE   action_code         VARCHAR2(15);   pub_freight_costs   wsh_freight_costs_pub.pubfreightcostrectype;   freight_cost_id     NUMBER

  • Are States a Big Part of Flex apps?

    Hi, I'm a flex newbie and I've been making considerable progress in the past few weeks.  I just learned about states and have been heavily experimenting with them.  I just want to know if states are an essential part to making Flex apps or is it one

  • How do I block telnet port 23 and 2000 (newbie)

    I am a small business owner who is trying to comply with Trustwave's PCI compliance to accept credit cards over my virtual terminal. They run a scan once a month and it says that I am not in compliance because Telnet is using port 23 and 2000. I have