How can I do to return a version of iPod software?
I have iOS 4,3,5 but I want to come back to 4.3.3 or previous.
Downgrading an iOS version is not supported by Apple.
Similar Messages
-
I purchased a movie on the AppleTV 2 but it is not showing up in iTunes on my desktop computer. How can I sync? (have lastest version of iTunes and ATV2 software)
Of course it always works, what are you talking about.
I appreciate that re-downloading is only available in the US and then only with certain content. However content that cannot be re-downloaded is not offered for purchase on the Apple TV. -
How can I re-install the last version of iPhoto, I hate this new version.
How can I re-install the last version of iPhoto. I hate this new version "Photos 1.0" which installed yesterday on my iMac. Please help. My operating system is OS X YOSEMITE 10.10.3. THANKS.
Go to the App Store and check out the Purchases List. If iPhoto is there then it will be v9.6.1
If it is there, then drag your existing iPhoto app (not the library, just the app) to the trash
Install the App from the App Store.
Sometimes iPhoto is not visible on the Purchases List. it may be hidden. See this article for details on how to unhide it.
http://support.apple.com/kb/HT4928
One question often asked: Will I lose my Photos if I reinstall?
iPhoto the application and the iPhoto Library are two different parts of the iPhoto programme. So, reinstalling the app should not affect the Library. BUT you should always have a back up before doing this kind of work. Always. -
How can I get back the other version of itunes?
It was much easier to use and way more confortable, How can I get back the other version of itunes? It was much easier to use and way more confortable
I can't pass playlists from itunes to my i-pod, and the sthetic of the new itunes is not a good one.
Could I get back an older version? those were easier to use, more simplierApple wisely leaves a copy of iMovie version 9 installed in the Application folder when you download version 10.
-
How can we know the return code of BDC Program ?
Hi All,
Please tell me : How can we know the return code of BDC Program when being exceuted in Session or in Transaction mode.
In my program, we are uploading data from Excel sheet to SAP via BDC
The records that are not updated we want to create a log file.
Now to know whether a record is updated ot not, wat syst field shloud be used?
Its urgent....
<b>Reward Point will be there ....</b>
Thanks,
HarishHi harish,
try the logic in this code ...
i had attached input file in the end.
TYPES: begin of errmess,
msgnr type t100-msgnr,
text type t100-text,
end of errmess.
TABLES : t100.
DATA: BEGIN OF DD_VA01,
AUART TYPE VBAK-AUART,
KUNNR TYPE RV45A-KUNNR,
BSTKD TYPE VBKD-BSTKD,
MABNR TYPE RV45A-MABNR,
KWMENG(2) type C,
KBETR(2) type C,
END OF DD_VA01.
DATA:IT_VA01 Like TABLE OF DD_VA01,
WA_VA01 Like LINE OF IT_VA01,
WA_VA01_F Like LINE OF IT_VA01,
IT_BDCDATA TYPE TABLE OF BDCDATA,
WA_BDCDATA Like Line OF IT_BDCDATA,
W_FNAME TYPE STRING,
messtab like bdcmsgcoll occurs 0 with header line,
it_errmess type table of errmess,
wa_errmess like line of it_errmess,
err_message type string.
data: zf1 type i,
zc1 type c value '2',
fn(20) type c.
Main Code ************************************************************
PERFORM get_input using 'C:\Documents and Settings\ic881592\Desktop\Daran_bdc_VA01-e.txt'.
SORT IT_VA01 BY AUART KUNNR BSTKD.
LOOP AT IT_VA01 INTO WA_VA01.
if WA_VA01_F-AUART <> WA_VA01-AUART OR
WA_VA01_F-KUNNR <> WA_VA01-KUNNR OR
WA_VA01_F-BSTKD <> WA_VA01-BSTKD.
PERFORM set_header_flag.
PERFORM create_bdc_header_data.
endif.
PERFORM create_bdc_item_data.
ENDLOOP.
PERFORM call_transaction.
PERFORM errorlog.
Procedures ***********************************************************
form get_input using w_fname.
CALL FUNCTION 'GUI_UPLOAD'
EXPORTING
FILENAME = W_FNAME
HAS_FIELD_SEPARATOR = '#'
TABLES
DATA_TAB = IT_VA01.
endform.
form call_transaction.
PERFORM bdc_field using 'BDC_OKCODE' '/11'.
CALL TRANSACTION 'VA01' USING IT_BDCDATA MODE 'A' messages into messtab.
refresh it_bdcdata.
endform.
FORM set_header_flag.
WA_VA01_F-AUART = WA_VA01-AUART.
WA_VA01_F-KUNNR = WA_VA01-KUNNR.
WA_VA01_F-BSTKD = WA_VA01-BSTKD.
if zf1 = 1.
PERFORM call_transaction.
endif.
zf1 = 1.
endform. "set_header_flag.
form create_bdc_header_data.
perform bdc_dynpro using 'SAPMV45A' '0101'.
perform bdc_field using 'VBAK-AUART' WA_VA01-AUART.
perform bdc_field using 'BDC_OKCODE' '/00'.
perform bdc_dynpro using 'SAPMV45A' '4001'.
perform bdc_field using 'KUAGV-KUNNR' WA_VA01-KUNNR.
perform bdc_field using 'VBKD-BSTKD' WA_VA01-BSTKD.
perform bdc_field using 'BDC_OKCODE' '/00'.
perform bdc_dynpro using 'SAPMSSY0' '0120'.
perform bdc_field using 'BDC_CURSOR' '04/06'.
perform bdc_field using 'BDC_OKCODE' '=CHOO'.
perform bdc_dynpro using 'SAPMV45A' '4001'.
PERFORM bdc_field USING 'BDC_OKCODE' '=POAN'.
endform. "create_bdcdata
FORM create_bdc_item_data.
CONCATENATE 'RV45A-KWMENG(' zc1 ')' INTO FN.
perform bdc_field using 'BDC_CURSOR' FN.
perform bdc_field using FN WA_VA01-KWMENG.
CONCATENATE 'KOMV-KBETR(' zc1 ')' INTO FN.
perform bdc_field using FN WA_VA01-KBETR.
CONCATENATE 'RV45A-MABNR(' zc1 ')' INTO FN.
perform bdc_field using FN WA_VA01-MABNR.
perform bdc_dynpro using 'SAPMV45A' '4001'.
PERFORM bdc_field USING 'BDC_OKCODE' '=POAN'.
ENDFORM.
form errorlog.
LOOP AT MESSTAB .
if MESSTAB-MSGNR = '311' or MESSTAB-MSGTYP = 'E'.
SELECT SINGLE msgnr text FROM T100
into wa_errmess
WHERE SPRSL = MESSTAB-MSGSPRA
AND ARBGB = MESSTAB-MSGID
AND MSGNR = MESSTAB-MSGNR.
IF SY-SUBRC = 0.
err_message = wa_errmess-TEXT.
IF err_message CS '&1'.
REPLACE '&1' WITH MESSTAB-MSGV1 INTO err_message.
REPLACE '&2' WITH MESSTAB-MSGV2 INTO err_message.
REPLACE '&3' WITH MESSTAB-MSGV3 INTO err_message.
REPLACE '&4' WITH MESSTAB-MSGV4 INTO err_message.
ELSE.
REPLACE '&' WITH MESSTAB-MSGV1 INTO err_message.
REPLACE '&' WITH MESSTAB-MSGV2 INTO err_message.
REPLACE '&' WITH MESSTAB-MSGV3 INTO err_message.
REPLACE '&' WITH MESSTAB-MSGV4 INTO err_message.
ENDIF.
CONDENSE err_message.
WRITE: / MESSTAB-MSGTYP, err_message .
ELSE.
WRITE: / MESSTAB.
ENDIF.
endif.
ENDLOOP.
endform. "errorlog
FORM BDC_DYNPRO USING PROGRAM DYNPRO.
WA_BDCDATA-PROGRAM = PROGRAM.
WA_BDCDATA-DYNPRO = DYNPRO.
WA_BDCDATA-DYNBEGIN = 'X'.
APPEND WA_BDCDATA TO IT_BDCDATA.
CLEAR WA_BDCDATA.
ENDFORM.
FORM BDC_FIELD USING FNAM FVAL.
WA_BDCDATA-FNAM = FNAM.
WA_BDCDATA-FVAL = FVAL.
APPEND WA_BDCDATA TO IT_BDCDATA.
CLEAR WA_BDCDATA.
ENDFORM.
input file :
OR 2148 0001235 R-1162 8 17
OR 2148 0001235 R-1161 2 30
OR 2148 0001235 100-400 6 25
OR 2148 0001235 R-1162 4 12
OR 2148 0001236 R-1162 3 12
OR 2148 0001236 R-1161 2 30
OR 2148 0001236 100-400 1 25
OR 2148 0001236 R-1162 7 12
OR 2148 0001236 R-1161 8 30
OR 2148 0001236 100-400 10 25
OR 2148 0001235 R-1161 5 30
OR 2148 0001235 100-400 2 25
OR 2148 0001235 R-11621 3 12
OR 2148 0001235 R-1161 2 30
OR 2148 0001235 100-400 1 25
OR 2148 0001235 R-1162 7 12
OR 2148 0001235 R-1161 8 30
OR 2148 0001235 100-400 10 25
OR 2148 0001236 R-1162 8 17
OR 2148 0001236 R-1161 2 30
OR 2148 0001236 100-400 6 25
OR 2148 0001236 R-1162 4 12
OR 2148 0001236 R-1161 5 30
OR 2148 0001236 100-400 2 25 -
How can I get a indesign debug version?
How can I get a indesign debug version? is it free?
Anyone could give me a download link?
thanksI know this is available to solution providers, if you are registered as such at partners.adobe.com. I don't know what level of membership is required, but that is one place the debug version is available from.
Thanks,
Max
Max Dunn
Silicon Publishing
www.siliconpublishing.com -
How can I downgrade to a previous version?
How can I downgrade to a previous version. I upgraded to 2.3 and now my site is totally hosed because the fonts on the master page are changing size arbitrarily without me touching them. I've had to eliminate my site map on the bottom of my master page because I've spent over 20 hours trying to correct the issue and can't seem to get anywhere. Even completely recreating the page doesn't correct the problem.
I was going to simply change a few photos from an older backup copy of the html files, but when I opened them with the 2.3 version, it changed all of the font sized on those files too.
I need my site working properly, so, how can I downgrade to the previous version and get my site working again until the bug is fixed?
Help please!http://support.mozilla.com/en-US/kb/Installing+a+previous+version+of+Firefox
http://www.mozilla.com/en-US/firefox/all-older.html -
I have an Ipod touch updated to last available ios 4.2.1.
How can I get the last compatible versions of the apps?
In the appstore there are only the lat app versions, most of them are incompatible with my device.
I know that previous versions of these apps were compatible with my ipod.
Can all download them someway?
thanksThe problem is: I never had the compatible versions. But I want them, I'd buy them if I could.
So I'm stuck with my Ipod, which can't be upgraded anymore to higher IOS versions, and with the appstore, that does not offer older versions; versions that have existed and still exist, perhaps in the recycle bin of some users, or somewhere in the appstore servers.
I know, its a policy, just to sell more devices. Will not work with me. I'm not buying more Ipods -
How can I revert to a previous version that allows youtube download?
how can I revert to a previous version that allows youtube download?
Also, if I can do that without destroying my library and files, it would be great!!
-
How can i buy films from App store spain wenn i'm living in Switzerland? Or how can i buy films in original version with subtiltes?
Do i need diferents id for each App store? I speak spanish, german and english and i would like to be able to buy films in each diferent language.
I also have € from a card from App Store Spain that i cannot use because i only have acces to App store switzerland. Can anybody help me? Thanks a lotYou need to be in a country to buy from its store, so whilst you are in Switzerland you can only use the Swiss store - you will need to be in Spain to use the Spanish store.
On each film's description page in the store there should be a list of the language(s) and/or subtitles that it has on it e.g. here in the UK one of the new releases, Svengali, has listed on its description page :
If there is a particular film that you would like to buy in a particular language that is not currently available in the Swiss store then you can try requesting that it be added, but unless the Swiss rights-holder for the film agrees to it then Apple won't be able to sell it there : http://www.apple.com/feedback/itunes.html
All iTunes gift cards are country-specific, so you will only be able to redeem and use the Spanish gift card when you are in Spain with a Spanish billing address on your account. -
Problem: Recently when I open iTunes it doesn't work; the little pinwheel just keeps spinning.
I have tried leaving it on, as suggested by another user, for over 12 hours. I didn't work.
I think the new iTunes version, 11.1.5, is not compatible with the operating system; Mac OSX 10.6.8. If this is so, how can I restore the previous iTunes version?You need to be updated to iTunes 11.2.2.
You might want to consider running the combo updater over your install to refresh your files.
Combo updater: Mac OS X 10.6.8 Update v.1.1 - 1.09 GB
http://support.apple.com/kb/DL1399
After running the combo updater, select Software Updater and update iTunes.
If iTunes fails to open after updating, hold down the Option key when launching iTunes. It will ask you to locate your iTunes Library.
Note: I've seen users with their iTunes Library on an external drive spin like this when the drive was failed to be seen in Disk Utility. Run Repair Drive on the external drive to fix this issue. -
How can i find the installed forms version in 6i...?
Dear all,
How can i find the installed forms version in 6i, the situation is we have given a solution which will work in only forms6i latest version, before implementing the same we need to check whether the forms latest version has been installed or not
Is there any way to find out without opening the forms builder..?
Even if we un install the forms from a machine, the forms60_path variable will remain in regedit, so we cannot go based on that and aslo i dont know whether regedit will have the version details and all.
It would be greatly appreciated if any one can give a solution.
Thanks in Advance.
Thangaraj.you query the registry, the registry has the version number saved, but I cannot remember exactly where and I don't have 6i Installed on my machine.
You just open the Forms Builder and click on Help/About.
But Jan's method is the best. -
I downloaded a Trial version of Adobe Acrobat XI. Now the trial has runout and I've signed up for a subscription. However, my software still needs a serial number. How can I get a serial number for the installed software?
There is no serial number and you don't need one. What you need for a subscription is to SIGN IN within Acrobat, so it knows the subscriptions you own.
-
I have purchased a film from the istore and it had transferred to my download but I can not do it as it say I don't have enough storage. I pressed the HD version and know SD are smaller how can I change it to SD version?
Tap Settings > General > About then swipe down, you'll see Available.
Make sure there's at least 500MB's of storage space. -
I've lost CS5 Design Premium Teachers Edition CD Installation Package. How can I download it? Typical version of CS 5 Design Premium is not working with my serial number. Can someone help me?
Łukasz%20Molenda if you purchased Creative Suite 5 from Adobe directly, and choose the download option at the time of purchase, then the download will be available in your account at http://www.adobe.com/. You can find additional details at https://helpx.adobe.com/creative-suite/kb/find-download-link.html.
If you purchased the software on a DVD and your current computer does not have an optical drive then you can copy the installation files to a USB drive on a computer which does contain an optical drive.
Maybe you are looking for
-
Hello All, Attached is the link explaining SAP Transportation Management Overview and a system demonstration of End to End Process Flow. Link: TM Overview + End to End Process Flow - YouTube Thanks and best regards, Navin
-
Is there way to use the new Photos App to search for duplicates in my photo library? TIA
-
Reg time updation in helpdesk application from portal into r/3 table.
hi all i had a scenario regarding help desk tickets which are raised from portal. Before going for my question i would like to explain my scenario. this is related to tickets raised by employees from portal,actually this is business logic is designed
-
File format not recognized in iphoto
When I try to import photos from my camera's SD card I get an error message that says the files are in an unrecognizable format. I'm not sure what has changed, I was able to do this before without issue and I don't recall making any changes to the fi
-
I have the new air and new airport extreme. What setting tells me it's operating at the new ac setting? thanks, JC