How can I export a single track in Soundbooth CS5?

Greetings,
I have built up a single track in Soundbooth composed of several repeated clips. I wish to export this single track.
How can I do this in CS5 Soundbooth?
Thanks,
folsombob

Sorry nobody has answered this. I haven't been in this forum in a couple of weeks.
If you have all the tracks right where you want them, are you able to save the file as an mp3?
Are you looking to export it for web use?
For video tracking?
I'm not sure why you'd want to export it as opposed to saving in one of the many available formats.

Similar Messages

How can I export multiple language tracks?

I have a MOV video with two language tracks, English and German. I want to export the file to another format (m4v) or import to iTunes.
Whenever I export, I lose one of the audio tracks. How can I export both Audio Tracks?
The video is H.264, 688 x 416, Millions
BOTH audio tracks are AAC, Stereo (L, R) 48.000 kHz
In the properties window, I selected (enabled) both audio tracks before exporting. And, in the "other settings" tab of properties, I set the language for each track, and I listed the "alternate" as the other language track.
Also when I imported the MOV into iMovie it only had the English track.
Many thanks,
MyMacForMore

Whenever I export, I lose one of the audio tracks. How can I export both Audio Tracks?
Have not personally tried this, but you might try the Free HandBrake app. I have loaded a file with one active and one inactive audio track and found that HandBrake does see and allow you to select one, the other, or both tracks for processing. Did not actually bother to convert the tracks since they were already AAC and could be added individually to an MOV file using QT 7 "Pro" software.
Also when I imported the MOV into iMovie it only had the English track.
I believe iMovie "Finder" level import only allows one audio and/or one video track per file. You can, of course, extract the non-included track as an audio file, and add it to an iMovie project separately. However, be advised, that the audio tracks will be flattened/dowmixed to a single track during export which may not be what you want.

How can I export an audio track

I have made an audio track with three songs in GB and now I want to export it and use it as a track for a Keynote slideshow.
How can I export it as AAC or similar?

I don't remember Reason being that straight forward, but the obvious way to go, is to mute all sends and bounce.
Then solo the reverb channel, in aux, checking it isn't shared by other sources, and bounce. You should have a dry and a reverbed signal, at your convenience.

How can I export a single frame as an image?

Hi, I'd like to take single frames of video and use them in printed material. Its HDCAM, from a Sony EX1, edited on FCP 10.1. How can I export them simply?
Regards
Phil

Place the playhead on the frame you want as a still. Then in share window choose location Save Current Frame. You can then select options such as Jpg, PNG etc.

How can I export 6 mono tracks and a one track two channel stereo pair in a quicktime as separate tracks?

I'm using Premiere Pro CC 2014 (8.1) and need to export a 5.1 mix as well as the stereo tracks as 7 separate tracks in a quicktime. If I select 8 channels it automatically creates 8 tracks. Also, if I export the the seventh stereo track as mono track won't it play mono?
Thanks in advance for nay help you can offer.
-Sam

Hi Richard and Kevin.
First of all thanks so much for the response and info. Just to clarify, you're saying I will need 8 tracks, 2 of which will be designated for the stereo pair, right? My concern is that I'm supposed to deliver only 7 tracks. They want the stereo pair as separate channels on one track. I'm wondering if I can create a one track stereo pair and put it on a stereo track, then export only the seven mono tracks (plus an empty track). Would the stereo still work?
Thanks for the link to the previous post. I had actually read it and though it was helpful in explaining how to set up the audio tracks I was still confused about the export.
Much thanks,
Sam

How can I export an audio track with just the effect signal without the audio?

I want to export dry audio tracks and their effects signals as separate tracks. For instance a track with a reverbed snare would be one track with the dry snare and one with just the reverb.
I know from people who use Reason that it's just a box you need to tick, but I'm struggling to find out how to do it in Logic. Surely it must be a way?

I don't remember Reason being that straight forward, but the obvious way to go, is to mute all sends and bounce.
Then solo the reverb channel, in aux, checking it isn't shared by other sources, and bounce. You should have a dry and a reverbed signal, at your convenience.

How can I export comments and tracked changes from Pages to PDF?

Hello,
I would like to know how I can export my pages document to a pdf that still keeps the comments I had made in the pages version. I am using the latest version of Pages by the way.
Thanks in advance...

Last week I printed a Pages '09 document to PDF and it carried over all the comments and marked up changes. This week I foolishly updated to Pages 5 and it won't do this anymore. If you need to print to PDF and get the comments in the document, you have to switch back to Pages '09, which I am doing tomorrow. Cannot believe they gutted Pages like this.

How can I export comments and tracked changes from Pages to Word?

I just purchased Pages and tried to export a couple pages of my document to Microsoft Word so I could send them for review to a client who does not have Pages; however, when I copy-pasted into Word, none of the comments or tracked changes showed up in the doc., only the finished product. I've tried updating my software, but that hasn't worked. Is there a way to fix this?

Here is what the Pages User Guide says:
" Exporting Pages Documents to Other File Formats
If you want to share your Pages documents with those who aren’t using the latest version of Pages, you can export your document to file formats that they may be able to use on their computers or other devices:
• PDF: You can view PDF files in iBooks, and view or print them in Preview and Safari. You can edit them with a PDF application. Fonts used in the Pages document are preserved in the PDF file.
Hyperlinks in your Pages document are exported to the PDF file. Hyperlinks are also created in the PDF file for table of contents entries, footnotes and endnotes, webpages, email addresses, and bookmarks.
• Microsoft Word: You can open and edit Microsoft Word files in Microsoft Word on a computer running Mac OS X or Windows.
Because of text layout differences between Microsoft Word and Pages, an exported Word document may contain a different number of pages than its Pages counterpart. You may notice other differences, as well, for example, table layouts and some special typographic features may not be identical. Some graphics (particularly those using transparency) may not display as well. Charts created in Pages appear as MS Graph objects, which you can edit in Microsoft Word.
• RTF: You can open and edit RTF files in many different word processors. RTF files retain most of the text formatting and graphics.
• Plain text: You can open and edit plain text files in many text editing applications, such as TextEdit. Exporting to plain text removes all document and text formatting, and images aren’t exported.Â ePub: You can open ePub files for reading in the iBooks application on an iPad, iPhone, or iPod touch, or in any ePub file reader. After you export your document to ePub format, you must transfer it to your device to read it in iBooks. To learn more about optimizing a document for ePub format, exporting it, and transferring it to your device, see “Creating an ePub Document to Read in iBooks” on page 257.
If your Pages document is password-protected, the password-protection is removed from the new file that's created upon export. However, if you export to the PDF file format, you can apply a new password at the time of export. "

How can I export slideshows created in Aperture v3.3.2 from Mid-2009 MacBook Pro-17 to blank DVDs?

(Fifth futile attempt in two hours, before I learned there was a Post webpage – I’m new to ApSuppCom - and after I learned that I am not allowed to update previous content, so I had to back out, make a few changes, and start over.) How can I export slideshows created in Aperture v3.3.2 (complete with superimposed captions and music tracks) from Mid-2009 MacBook Pro-17 to blank DVDs ? (Some other specs: Mac OS Lion 10.7.5; Capacity 499.5 GB; Processor 2.8 GHz Intel Core 2 Duo; Memory 4GB 1067 MHz DDR3; Graphics NVIDIA GeForce 9400M 256MB)
I cannot do a copy (export) without various error messages appearing and the inevitable stoppage occurring. Always with the DVD Video Player final message reading, “Supported disc not available.” Advisors and Mac Geniuses at local Apple Stores have told me to try Roxio Toast. When I visited the Roxio website, and found numerous other company products, the descriptions all seemed to suggest that most of the apps shown can easily export videos to DVDs, but nothing was said about finished digital slide shows being exported. At future events soon, I hope to be handing out these finished DVDs (free) to the people in them. Any help will be greatly appreciated. A.Z.

How can I export slideshows created in Aperture v3.3.2 (complete with superimposed captions and music tracks) from Mid-2009 MacBook Pro-17 to blank DVDs ?
Aperture cannot burn slideshows to a DVD. It only can export a video of your slideshow.
In Aperture 3 you use the "Export" button in Aperture's slideshow project to render a video to a folder on your disk.
Then you use iDVD or another program to burn a video DVD.
I cannot do a copy (export) without various error messages appearing and the inevitable stoppage occurring. Always with the DVD Video Player final message reading, “Supported disc not available.”
Could you please describe the exact steps that are causing these error messages?
How are you exporting your slideshow from Aperture? Which settings are you using? And how are you importing the video to iDVD or Toast to burn a video DVD?
For more suggestions see Karsten Schlüter's user tip: How to create a video-DVD? (Macs without iDVD)

How can I export a slideshow from iPhoto to iMovie 09. I try but it only lets me import 211 out of the 311 photos I have in the slideshow.

How can I export a slideshow from iPhoto to iMovie 09. I try, but it only exports 211 out of the 311 photos I have in the slideshow I made on iPhoto.

how do i change the format to the right one?
Before you can decide what to do, you have to know what you are starting with. Sony MPEG-1 files would be converted one way while DivX or WMV files would likely be handled in another. Extraneous tracks can be removed directly with QT Pro but if you don't have QT Pro then there may or may not be other work around possibilities depending on the specific audio and video compression formats in use. The best place to start would normally be to double-clic the source file in iPhoto to open it in the QT Player. When it opens in the QT Player, check the "Inspector" window to see what it says on the "Format:" lines. This will tell you the type of audio and video content you are dealing with here. Then come and tell us so we can offer some specific conversion solutions.

How can I export songs from my iTunes to a mail program or laptop?

How can I export songs from my iTunes to a mail program/computer? The songs in question are originals composed by my boyfriend in Garage Band. We have full rights to them, but they import into iTunes like all the other artists songs. His hard drive crashed and I have the only copies. I have no access to my iMac for 2 months while we tour our show and we need them on the tour. We are in dire straights if we can not access these songs and the iPad will not hook up to our equipment. Plus we need to add a track to a promotional video. So how can we access our own music?
Thanks.

If they are in the iPad's Music app then the only way to get them out of it is by connecting the iPad to a computer. As they aren't iTunes purchases you won't be able to copy them back to a computer's iTunes via File > Devices > Transfer Purchases, instead you will need a third-party program on the computer to copy them off - there are some listed half-way down this page which should work: https://discussions.apple.com/docs/DOC-3991

How can I export an Adobe illustrator CC .AI file to a DWG or DXF file suitable for SolidWorks?

Hi
Can anyone help?
How can I export an Adobe illustrator CC .AI file to a DWG or DXF file, without SolidWorks enlarging the file & converting every curve into hundreds of short little straight lines rather than a single continuous line/s.
I have made sure the file is ungrouped or has any compound paths or colours.
Opening it in Autocad 2010 still converts the DWG file into hundreds of short little straight lines!
The file is needed to laser cut out an aluminium shape using SolidWorks 2008 (Metal soft)?
Formats they can handle are:
DWG, DXF, IGES, IGA
There must be a way to export it without re-drawing the whole design in Soildworks again!!??
Can anyone help?
INCA

Not really. This is a limitation you will have to live with. Unless you are extremely careful, most paths will be converted to polyline segments by AI and in particular in AI CC this is somehow busted, so it happens more often. You might have much more luck opening a native AI file in DraftSight or a 2D CAD program like TurboCAD and exporting a DWG or 2D IGES/ STEP file from there. The sizing issue is a different matter, but without knowing what units you actualyl used, nobody can advise.
Mylenium

How can i export the data to excel which has 2 tables with same number of columns & column names?

Hi everyone, again landed up with a problem.
After trying a lot to do it myself, finally decided to post here..
I have created a form in form builder 6i, in which on clicking a button the data gets exported to excel sheet.
It is working fine with a single table. The problem now is that i am unable to do the same with 2 tables.
Because both the tables have same number of columns & column names.
Below are 2 tables with column names:
Table-1 (MONTHLY_PART_1)
Table-2 (MONTHLY_PART_2)
SL_NO
SL_NO
COMP
COMP
DUE_DATE
DUE_DATE
U-1
U-1
U-2
U-2
U-4
U-4
U-20
U-20
U-25
U-25
Since both the tables have same column names, I'm getting the following error :
Error 402 at line 103, column 4
alias required in SELECT list of cursor to avoid duplicate column names.
So How can i export the data to excel which has 2 tables with same number of columns & column names?
Should i paste the code? Should i post this query in 'SQL and PL/SQL' Forum?
Help me with this please.
Thank You.

You'll have to *alias* your columns, not prefix it with the table names:
$[CHE_TEST@asterix1_impl] r
1 declare
2    cursor cData is
3      with data as (
4        select 1 id, 'test1' val1, 'a' val2 from dual
5        union all
6        select 1 id, '1test' val1, 'b' val2 from dual
7        union all
8        select 2 id, 'test2' val1, 'a' val2 from dual
9        union all
10        select 2 id, '2test' val1, 'b' val2 from dual
11      )
12      select a.id, b.id, a.val1, b.val1, a.val2, b.val2
13      from data a, data b
14      where a.id = b.id
15      and a.val2 = 'a'
16      and b.val2 = 'b';
17 begin
18    for rData in cData loop
19      null;
20    end loop;
21* end;
for rData in cData loop
ERROR at line 18:
ORA-06550: line 18, column 3:
PLS-00402: alias required in SELECT list of cursor to avoid duplicate column names
ORA-06550: line 18, column 3:
PL/SQL: Statement ignored
$[CHE_TEST@asterix1_impl] r
1 declare
2    cursor cData is
3      with data as (
4        select 1 id, 'test1' val1, 'a' val2 from dual
5        union all
6        select 1 id, '1test' val1, 'b' val2 from dual
7        union all
8        select 2 id, 'test2' val1, 'a' val2 from dual
9        union all
10        select 2 id, '2test' val1, 'b' val2 from dual
11      )
12      select a.id a_id, b.id b_id, a.val1 a_val1, b.val1 b_val1, a.val2 a_val2, b.val2 b_val2
13      from data a, data b
14      where a.id = b.id
15      and a.val2 = 'a'
16      and b.val2 = 'b';
17 begin
18    for rData in cData loop
19      null;
20    end loop;
21* end;
PL/SQL procedure successfully completed.
cheers

How can I export a still picture from a video clip?

How can I export a still picture from a video clip?

I'm able to export stills from iMovie without anything extra. I create a new project - call it Exports say. Now, in your event clip with the frames you want as stills, select a single frame and drag it into your project. Repeat for other stills you want to export. Then choose Share -> Export Using QuickTime.
In the pop-up, choose Movie to Image Sequence. Click Options and choose the image format you want. Playing with the number of stills lets you pick how many stills you want from each second of video. Hit OK and the stills will be generated in the directory you choose.
I've only done this with HD video. Don't know how well it works with lower res, interlaced vid.
HTH,
Tom

How do i export a single jpeg frame from a video file in final cut x

how do i export a single jpeg frame from a video file in final cut x

You can also use the 3 finger method of COMMAND+SHIFT+4, then drag across what you want to copy from the image. That will show up on your desktop, which then you can edit using Photoshop, if you want too.
You can then change the file format from a PNG to either a .JPG or TIFF or even a Photoshop image.
Make sure, you have stopped the playback, to what you want to save as a still.
Either method works, to make a still image from video.

How can I export a single track in Soundbooth CS5?

Similar Messages

Maybe you are looking for