How can I format the URL Button?

I am using multiple URL buttons that point to cells of data that reflect numbers, such as %, $ and #,###. I have tried formating the excel spreadsheet directly, however, the format of the URL button isn't coming through?
Is there a solution to accomplish this?

Hi,
What you want to do the url button,just create a URL and paste in excel sheet and link the cell to URL button.But you need to split the URL syntax and palce into 2 cells. one cell contains the server details and another one contains the prompt values and concatenate these two cells.use the concatenated cell as URL button destination cell.
please let me know...

Similar Messages

How can I find the URL for an iCal calendar in iCloud so I can make a link to it on a web page.

I have a single iCal calendar that I want people to access through my webpage. How can I find the URL so that they can view the calendar without having to subscribe to it. I converted to iCloud from .Mac and I can see that changes to this calendar are not showing up.

Mmmh.. i see... I don't know wether it is possible for people just check calendars without subscribing to them... I have been sharing some calendars in my website (maybe you can have a look at it in order to check wether it could be a possible solution for you)
http://web.me.com/andreabruschi/englishplanet/English_Courses.html
Cheers
Andrea

How can I disable the Voicemail button on an iPhone 4

How can I disable the Voicemail button on an iPhone 4 or
if that is not possible can i programme it to dial my own phone rather than my carrier's Voicemail box?

No, it's not possible to disable that button and no, it's not possible to reprogram it to anything else.

How can I remove the Star Button from the Address Bar?

How can I remove the Star Button from the Address Bar? There's no obvious way of doing it. Is there any about:config value related to it?

https://addons.mozilla.org/en-US/firefox/addon/no-star-button/

Answer: to How can I get the reset button to work.

How can I get the reset button to work?: Answer
Thanks to everyone who helped on this. You are awesome. Especially Ned!! Posted here because I was unable to add more to the existing post.
Here is the question:
When you click on the reset button, this error below comes up. If you can't find the button it is the navy colored rectangular thing in the lower left corner of page.
ArgumentError: Error #2025: The supplied DisplayObject must be a child of the caller.
    at flash.display::DisplayObjectContainer/removeChild()
    at AddATree2/onReset()
When you click on the reset button, this error below comes up. If you can't find the button it is the navy colored rectangular thing in the lower left corner of page.
Here is the answer:
//when you click the reset button everything is removed from the stage
    //except the star, baclground, and reset button (trees and greeting REMOVED)
    public function onClear(Event:MouseEvent):void
            if (tree3) removeChild(tree3);
            if (tree2) removeChild(tree2);
            if (webText) removeChild(webText);
            if (tree) removeChild(tree);
            clickCount = 0;

This is the answer to what to put in the onclear function.

How Can i get the URL of a page

How Can i get the URL of a page . like in ASP the
Request.QueryString() ...
Thanks

Are you wanting actual URL or just the url (query string
variables)?
For url variables you would reference the structure.variable
name like so:
#url.variablename#
So if you had a url like this:
http://www.somedomain.com?page=home&action=view
You could access the variables like so:
#url.page#
#url.action#
If you are wanting to actual page you could use:
#cgi.script_name#
Bryan Ashcraft (remove brain to reply)
Web Application Developer
Wright Medical Technologies, Inc.
=============================
Macromedia Certified Dreamweaver Developer
Adobe Community Expert (DW) ::
http://www.adobe.com/communities/experts/
"Yasmin_lady" <[email protected]> wrote in
message
news:e4fhjv$fpl$[email protected]..
> How Can i get the URL of a page . like in ASP the
Request.QueryString()
> ...
> Thanks

How can I make the playback buttons of YouTube and other plug-ins bigger since they are so tiny?

How can I make the playback buttons of YouTube and other plug-ins bigger since they are so tiny in Firefox? I tried some suggestions that dealt with entering "about:config" in a fresh browser, but to no avail. I also downloaded an add-on called "Theme Font & Size Changer", but that didn't work either. So, I am reaching out here as that was a suggestion that another user here offered.

Ah, yes- that is an ultra high DPI (dots per inch) display. This is a known issue in Flash Player, which Adobe is working on fixing.
In the mean time, you can get some videos to have normal-sized controls by switching Youtube to the HTML5 video player:
In Firefox, go to https://www.youtube.com/html5 and click the "Request the HTML5 player" button.

In Yosemite, How can I get the "READER" button back in the Tool Bar at the top of the screen

In OS X Yosemite,
How can I get the "READER" button back in the Tool Bar for Safari at the top of the screen ?
Thanks,

I don't see the "READER button".
I see "READ LATER" but not the "READER" function.
Maybe I'm doing it wrong.
Please continue to HELP ME with this question.
In the previous version of Safari, there was a "READER Button" on the right side of the tool bar. This brings up the selected web page in a READER mode all by itself, without the ads, etc.
Are you saying that I can get this function by clicking on the Left side of the Address bar?
When I do that, I get lots of icons, but NOT the READER button.
Thanks

How can I format the number in ?shape-text:

Hi All,
I am using shapes in the rtf template. I need to format the number which is used in the shape as
<?shape-text:mytagname?>
now mytagname has inconsistent values in the xml like 3, 4.5, 3.55. I want to format this to two digits after decimal i.e 0.00 format.
How can I format the number in <?shape-text: ???
Regards,
Amit Deshpande
Persistent Systems Ltd

Hi Amit,
<?shape-text:format-number(4.5,'#,##0.00')?>

How can i see the URL which has length more than 255 chars in fucnction

Hello Every body....
I am facing one problem....I have a function module which returns URL in one table
but in the function module display i am able to see only 255 characters,but the URL is more than 255 Characters..How can i see the URL which has the length more than 255 characters..
In the Table the fields url length is 4000 chars.....
but display it is showing only 255 chars.....
Please Help me...??????????

Hello,
Have you tried breaking your structure into 255 chunks? I don't know what the structure you are moving from looks like, but you should be able break it back up into the SOLI structure. The end of a line in SOLI doesn't create a Carriage Return/Line Break. You have to insert these yourself like in the following:
* Create document
      clear mail_line.
      move 'This is a test E-Mail'(d01) to mail_line.
      concatenate mail_line
                  cl_abap_char_utilities=>newline
                  into mail_line.
      append mail_line to l_mailtext.
What kind of attachment are you wanting to create - a text tab delimited file for reading in a spreadsheet application such as excel? You might try reassembling your data table into a single string with newlines where you need them. Then use function module SCMS_STRING_TO_FTEXT to turn it back into SOLI. This is what I have done in the past. I'm afraid without knowing more about your source structure and attachment type, this is about all I can tell you.
Vasanth

How can I use the find button in Edit ADF Table in JDeveloper 10.1.3

Hi all,
in JDeveloper 10.1.3
How can I make the find button work in
the same Edit ADF Table without adding new view ?
thanks

Hi there,
it depends on what you mean by adding a new view object. You[b] don't have to create a new viewobject. You do have to add a second instance of your existing view object to your page.
Form scratch works more or less like this. Drop your view object as ADF table on the form. Add the find and execute operations. Drop the same view object on your form but now as ADF search form. Place the fields form the search form in the corresponding columns next to the existing fields. For each #{row} field ,and the find button, set the rendered property
#{bindings.testUserIterator.findMode ==false}. For each inputfield, and the execute, set the rendered property #{bindings.testUserIterator.findMode ==true}.
Now it will work.
I hope this is what you are looking for.
Good luck
Luc Bors

How can I put the close button in the mainframe of the dialog?

Hi all,
I am creating a new dialog and I would like to konw...
How can I put the close button in the mainframe of the dialog?
Thanks in advance.
Best regards,
Juanma.

Juanma,
Usually, a dialog would have an OK and a Cancel button, both can be served as the close button, but if user clicks the ok button (DefaultButtonWidget) to close the dialog, your dialog controller's (if it is based on CDialogController) ApplyDialogFields will get called so you can react to the OK action, otherwise, if user clicks the cancel button (CancelButtonWidget), nothing will happen. The dialog simply is dismissed.
See BasicDialog SDK sample to see how to add DefaultButtonWidget and CancelButtonWidget to a dialog.
Thanks!
lee

How can I see the url of a link before clicking on it?

Hi. I have Firefox 10.0.2. I used to be able to see the url of a link on web pages in the bottom left of the browser. That way, if I the url didn't seem legit I wouldn't click on the link. But now, when I put the mouse over a link, nothing comes up. How can I see the link addresses again? Thanks.

The Status Bar. where the link previously showed on mouse hover, has been replaced by the Add-on Bar. You can install the following add-on to get some of the former Status Bar functions back. The Add-on Bar must be turned on. The add-on will also stop the showing of the "tooltip" type status loading text, and will, instead, show it in the Add-on Bar:
*See --> https://support.mozilla.org/en-US/kb/what-happened-status-bar
*To turn on the Add-on Bar, see --> https://support.mozilla.org/en-US/kb/Back%20and%20forward%20or%20other%20toolbar%20items%20are%20missing#w_showing-the-navigation-toolbar '''and click on "Add-on Bar" to check it'''
*Add -on '''''Status-4-Evar''''': https://addons.mozilla.org/en-US/firefox/addon/status-4-evar/
*If necessary, after install and restart:
**Open Customze window (Firefox button > Options > Toolbar Layout '''''OR''''' View > Toolbars > Customize '''''OR''''' ALT+V+T+C '''''OR'''''right-click in the empty space at the end of the Tab Bar and choose Customize)
**'''While Customize window is open''', drag any or all of the following from the Customize window to the Add-on Bar in the order and position you want them to appear. Then click "Done" button at lower right on the Customize window.
***"Status Text" ('''''link on mouse hover or during page loading''''' or "Done" when page is loaded)
***"Progress Meter" (progress bar of page loading)
***"Download Status" (status of download)
'''If this reply solves your problem, please click "Solved It" next to this reply when <u>signed-in</u> to the forum.'''
Not related to your question, but...
You may need to update some plug-ins. Check your plug-ins and update as necessary:
*Plug-in check --> http://www.mozilla.org/en-US/plugincheck/
*Adobe Shockwave for Director Netscape plug-in: [https://support.mozilla.org/en-US/kb/Using%20the%20Shockwave%20plugin%20with%20Firefox#w_installing-shockwave Installing ('''''or Updating''''') the Shockwave plugin with Firefox]
*Adobe PDF Plug-In For Firefox and Netscape: [https://support.mozilla.org/en-US/kb/Using%20the%20Adobe%20Reader%20plugin%20with%20Firefox#w_installing-and-updating-adobe-reader Installing/Updating Adobe Reader in Firefox]
*Shockwave Flash (Adobe Flash or Flash): [https://support.mozilla.org/en-US/kb/Managing%20the%20Flash%20plugin#w_updating-flash Updating Flash in Firefox]
*'''''Next Generation Java Plug-in for Mozilla browsers''''': [https://support.mozilla.org/en-US/kb/Using%20the%20Java%20plugin%20with%20Firefox#w_installing-or-updating-java Installing or Updating Java in Firefox]

How can I format the y-axis to display durations?

How can I cause the y-axis of this chart to reflect the values in Row 6 [Average Pace (Minutes per Mile)] of the corresponding table in duration format rather than number format. In other words, I need the y-axis to be a list of durations appearing like the figures in Row 6. Also, I need it to begin with the longest duration (10:00) and to climb to the shortest duration (5:00) at the top. I'll should mention that I already tried using the Inspector, but the "Duration" formatting option for the y-axis was not selectable while other formats were. I also tried formatting the y-axis this way to "Same as source data," and this didn't cause it to display durations either, though I had expected it to. Thanks in advance!
Ryan

Hi Ryan,
Numbers can display only numeric values on the Y axis, and those values are always arranged from highest to lowest, with highest at the top.
That said, here's what is possible:
There is, of course, some manipulation of the data involved in this, as well as replacement of the value axis labels with custom labels in a text box.
Here's what's happenng with the man behind the curtain:
While the chart shows the data from row 6, it is actually graphing the data from row 7 (or whatever row you choose to place this data in.
Row 7 uses a formula ( =-60*24*STRIPDURATION(B6) ) to first strip the Duration from the data in row 6, returning a number representing the fraction of a 24 hour day equivalent to the duration in row 6.
It multiplies that number by 24*60 to convert it to the number of minutes (and fractions of minutes) in the duration, and changes the sign of the number to - (negative) so that the shorter values will be higher in the chart.
Selecting row 7 and choosing Line Chart from the Charts Button's menu produces, with one difference, the chart shown after setting the min and max values on the Y axis to -10 and -5 respectively, and incrementing the number of steps on the Y axis from 4 to 5).
The difference, of course, is that the Y axis value labels all show negatic=ve numbers, with no m to indicate they show 'minutes.' To correct this, insert a text box and enter the six numbers 5 to 10, with each followed by an m and a return.
Select the Text box, change the alignment to Right aligned (with the alignment button in the format bar), then drag the box in front of the Value axis labels with the 5s aligned.
In the Inspector, choose Text inspector, then Text. Use the Space after Paragraph stepper to increase the setting until the 10 in the box aligns with the 10 in the Value Axis labels box. You may have to tweak the height of the chart slightly to achieve this alignment.
Select the chart, then choose the Chart Inspector, then Axis. Use Choose Axis Options (for the Value Axis) to uncheck Show Value Labels.
Regards,
Barry

How can we make the save button active in standard toolbar in outout of alv

Hi experts ,
I am using factory method to print alv with oops .
Cancel , Exit and Back button are active by default in Standard tool bar in output of Report , But Save button is not active , How can i make that save button active .
Also Pls tell me how i can make editable to the cell in output ,
My Code is like this :
cl_salv_table=>factory( IMPORTING r_salv_table = gr_table CHANGING t_table = ispfli ).
gr_functions = gr_table->get_functions( ).
gr_functions->set_all( abap_true ).
gr_display = gr_table->get_display_settings( ).
gr_display->set_striped_pattern( cl_salv_display_settings=>true ).
gr_display->set_list_header( 'This is the heading' ).
gr_columns = gr_table->get_columns( ).
gr_column ?= gr_columns->get_column( 'CITYTO' ).
gr_column->set_long_text( 'This is long text' ).
gr_column->set_medium_text( 'This is med text' ).
gr_column->set_short_text( 'This is sh' ).
gr_column ?= gr_columns->get_column( 'CITYFROM' ).
color-col = '6'.
color-int = '1'.
color-inv = '0'.
gr_column->set_color( color ).
gr_sorts = gr_table->get_sorts( ).
*gr_sorts->add_sort( 'CITYTO' ).
gr_sorts->add_sort( columnname = 'CITYTO' subtotal = abap_true ).
gr_agg = gr_table->get_aggregations( ).
gr_agg->add_aggregation( 'DISTANCE' ).
gr_filter = gr_table->get_filters( ).
gr_filter->add_filter( columnname = 'CARRID' low = 'DL' ).
gr_layout = gr_table->get_layout( ).
gr_layout->set_key( key ).
key-report = sy-repid.
gr_layout->set_save_restriction( cl_salv_layout=>restrict_none ).
gr_table->display( ).
Rgds,
Premraj

Hi,
1)you need to give the function code to that save in the Function Keys of that screen from the GUI Status.
2) while filling the field catalog of that field you need to put the
wa_fieldcat_edit-edit = c_x.
i.e use the edit and append to that field catalog internal table.
for more infomation you can refer to below links:
problem with alv edit and save
*Edit* and *Save* for the selected records in ALV
solves your problem
Thanks!!

How can I format the URL Button?

Similar Messages

Maybe you are looking for