How can I have a checkbox that a user checks and populates a field with read only text, then if another checkbox is checked it will allow user text input

Hi
How can I have a check box that a user checks and populates a field with read only text, then if another check box is checked it will allow user text input into that same field, her is my javascript
var a ="Not Applicable"
if (this.getField("Do").value == "Yes")
a=""
if (this.getField("DoNot").value =="Yes")
a=a + ""
event.value=a
say if the "Do" cb is checked, Not Applicable would populate the text field, and if the "DoNot" cb is checked it would allow user input into the same text field, the javascript I have will not allow user input,
thanks for any help I am new to javascript

Are these fields mutually exclusive?

Similar Messages

  • How can I have a program prompt a user to input a selected number of simultaneous (different devices run off com/rs232 ports) and be able to compile all the data and/or graph it simultaneously?

    I have a project that I'm working on that I could use some help on.
    Some background on it is I'm taking data from a balance via RS-232 (can be a selectable list of balances), and then communicating with them on their own separate COM port. I need these to then run in parallel to then take masses in regular increments and then output them to a graph and/or TDMS file. 
    What I'm trying to have is that a subVI prompts the user to how many simultaneous runs will be going.
    Then I will want multiple pop prompts (one for each simultaneous run) which will have initial data input (data cluster) and then associate these with the COM port and the specified balance. 
    I initially thought of utilizing a For Loop this way but I can't get these windows to pop up multiple times while storing their own values in say a cluster array. Can anyone give me any ideas to get me a little further?

    Cameron,
    I've created a prompt for the user to select the number or runs to be run simultaneously. 
    This then should trigger the amount of prompts the user needs to input - ie VISA resource, and headers to label the "samples".
    I want this to be done in multiples (somewhere around 1-10 simultaneous runs - bounded by the program) so that data points from multiple sources can be taken and graphed/saved to file. I just am having issues with the loop situation to be able to keep prompting the user X times and also output the data to the front panel. Originally i thought I could somehow manipulate a tab control container but I'm getting roadblocked. 
    Does that help you understand what I'm trying to do?
    I've attached an image of what I want the user to input for each sampling.
    Attachments:
    Capture11.JPG ‏24 KB

  • How can I have the pricing conditions at the item and header level of the d

    How can I have the pricing conditions at the item and header level of the delivery? There exist "condition" tabs both the header and the item level of the delivery but the contents of the tabs are empty. I'll be happy if you can help me. Thanks in advance....

    Hi
    If you want to have the pricing procedure at delivery level then you need to assign a pricing procedure at delivery level also
    Just go through the path to maintain the pricing procedure at delivery level.
    IMG -> Logistics execution -> Shipping -> Basic Shipping Functions -> Pricing -> Pricing Procedure. for Delivery.
    But can you be more clear if the above one is not your query ?
    Regards
    Srinath

  • How Can You Track a Person That Has Your IPhone And You Want It Back

    How Can You Track a Person That Stole Your IPhone And You Want It Back

    Log into icloud.com with your Apple ID and use Find my iPhone to track it. If it can't be located that way, there is no way to track it.

  • How can I have two VI that works together?

    How can I mix two VI that work together ? Does it work with Flat Sequence Structure or something's?

    I've always wondered about that bracket-thingy, but I've been able to get along without it, so I don't worry about it any more.
    Why would you want to try to program a doubly-charged carbon ion (C++), anyway? It's just going to find an oxygen ion or aromatic ring to react with, no matter what you do. You're sure not going to steer it towards another cation without going to Fermilab or CERN (Yes, I understand they use LabVIEW there).
    Cameron
    To err is human, but to really foul it up requires a computer.
    The optimist believes we are in the best of all possible worlds - the pessimist fears this is true.
    Profanity is the one language all programmers know best.
    An expert is someone who has made all the possible mistakes.
    To learn something about LabVIEW at no extra cost, work the online LabVIEW tutorial(s):
    LabVIEW Unit 1 - Getting Started
    Learn to Use LabVIEW with MyDAQ

  • How can I have two Apple IDs (one from Canada and one from the UK) for the same device?

    I originally bought an iPhone in Canada and had my first Apple ID while there. I still want to have this account, as there are some Canadian apps that I wish to have and keep updating. However, I am now living in the UK - yet when I try to search for apps that all of my friends have I can't find them because they are particular to Britain. Do I need an new Apple ID for the UK, and is it possible to have both Apple IDs feeding into the same iTunes account?
    Thanks for any insight!

    If you want to move your iCloud account to another existing ID you'll have to delete the existing account, set up a new account with the other ID, then upload your data to the new account.  To do this, begin by going to Settings>iCloud and turn all synced data (contacts, calendars, etc.) to Off.  When prompted choose to keep the data on your phone.  After everything is turned off you can scroll to the bottom and tap Delete Account.  Then set up the new account with your other ID and turn syncing for calendars, contacts, etc. back to On.  When prompted, choose Merge.  This will upload your data to the new account.  Note: this will not migrate your photo stream photos.  You will need to save these prior to deleting the existing account.

  • How can I have a button that will show/hide a text box and images on the same page?

    I have a page like below:
    I want to make so that those 3 buttons show different text under them when they are each pressed. How can I achieve this?
    Thanks.

    Hello,
    Please try using Tooltip Composition Widget to achieve that..
    You need to customize  the trigger as the button  and you can use the target to insert desired text box or images.
    you can find this in Widgets library panel > composition
    Please let me know in case you need any other clarification on that.
    Regards
    Vivek

  • How can I have the version 11 of iTunes on my iPad as my IT office only supports that version and not 11.1

    How can I get version 11 of iTunes on my iPad instead of version 11.1. My windows computer at work will not connect with my iPad as the work computer only has version 11 of iTunes and the IT office will not let 11.1 to be downloaded because they do not support it.

    Hi,
    As I stated before you do not get iTunes 11 on your ipad. Are you getting a message on your works computer to update iTunes on the computer from version 11 to 11.1? If you select not to update iTunes, can you still sync your ipad to iTunes 11?
    Jim

  • How can i have 2 seperate phones on the cloud and not duplicate my contacts and stuff?

    I have 2 iphones on my account, when I set up icloud it merged both contact files, notes, apps and everything else.  the only way I have figured out how to keep it seperate is that I turned off the icloud sync on my wifes phone.  isn't there a way to have them both sync there own stuff?

    These articles may be helpful using one computer and multiple devices:
    http://support.apple.com/kb/HT1495
    http://support.apple.com/kb/HT1386
    Log into your shared computer with a different account and you can set up your own iTunes, calendar and contacts.

  • How can I have an object toggle between fade out and fade in with button?

    Hello all,
    I have a problem and I was hoping someone out there could help me out with it.
    I have smart shape that is set to show for "rest of project" on one of my early slides.  It is not visible in output in the properties, but when a user clicks a button in the project, it should fade in and then stay visible.  If the user clicks the same button again, it should fade out and stay hidden.  So rather than toggle between show and hide, which I know how to do, I want it to toggle between fade in and fade out.  I am having trouble with this.  Setting its transition to fade in and fade out in the properties of the smart shape doesn't help...
    Here is the advanced action I have attached to the button that should allow the user to toggle between fade in and fade out.  The "if" parts works -- the object fades in and then finally "shows" at 100% the "else" part almost works.  It fades out, disappears, but then shows again, which I obviously dont want it to do.  I want it to stay hidden.
    If you can help, it would be great!! 

    I Don't
    But as a work around you could try increasing the canvas size to match the illustrator file, paste in the object then crop off the excess canvas in photoshop

  • How do I have my data that's written to a spreadsheet be written with the time it is taken

    Thanks for the help on my other question. I'm sure it's simple but I just don't know how to do it. I need my data written to the file also to have the time that it was taken to be along side of it. But, I don't want the date with it. Thanks for the help.

    Instead of using Write to Spreadsheet File, use:
    - Array To Spreadsheet String to convert your array in a string
    - Get Date/Time String to have a string time stamp
    - TAB character constant to insert it between time and data
    - Concatenate Strings to format the final string (to write it into a file)
    and Write Characters to File in the end.

  • How can I view all comments in a Pages doc and print the doc with comments?

    It seems that we can no longer view comments in the margin of a document.  It is also not possible to print the document with comments visible.  Anyone else having this problem?  Pages 09 Help does not even offer an up-to-date explanation.  "Show Comments" only shows color shading.  The option “Show Comments and Changes Pane" does not even exist.  How can I get the comments to print???

    You will have to wait for Apple to fix this deficiency in a forthcoming update to Pages v5. Or, you could use Pages ’09 v4.3, if originally installed before the v5 upgrade, and located in /Applications/iWork '09.
    Otherwise, use another solution (e.g. Office for Mac 2011, LibreOffice).

  • How can I unlock ipod touch 5th gen currently disabled and never sync'd with itunes

    Basic situation. Ipod touch 5th gen. Passcode forgotten and tried too many times such that ipod is disabled and requested to connect to iTunes.  Problem is that the ipod was never sync'd with iTunes so the connection fails.  I've only owned it for 9 months or so.  I know I can recover all my music through iTunes and my applications through the app store since all of my content was legally purchased.  The problem is that I need to also recover my contacts and pictures since this is the only place they exist.
    I have read about methods up to 4th generation where you can access a particular file on the device via computer and rename it to unlock the device. That would most likely allow me to then sync/backup via iTunes and recover my data.  Problem is that I can only access the DCIM folder via windows manager and it contains no data. Perhaps there is a way to access the device a different way?
    Is there a way with the 5th generation to either reset the lock (from disabled to locked with a 1 min wait for retry as an example) to allow me more opportunities to try other passcodes that I may have set (including mistypes etc) or to remove the passcode completely and let me set it to something I will write down this time?
    Please do not reply with the standard apple responses of 'sync with itunes' or 'factory reset' and no, I did not sync with the icloud either (I tried but it was unsuccessful for some reason).
    The answer doesn't even have to be a free one as I would be willing to pay for the solution if it were guaranteed to work.  Since apple seems to want to charge for any type of support, even to ask a question, I am relying on the community for help.  Thanks much.

    You have to place the iPod in Recovery mode as Apple says and erase the device. It is a security feature.
    or
    If you previously turned on FIndMyiPod on the iPod in Settings>iCloud and wifi is on and connected go to iCloud: Find My iPhone, sign in and go to FIndMyiPhone and use Remote Wipe to erase the contents of your device. If you have been using iCloud to back up, you may be able to restore the most recent backup to reset the passcode after the device has been erased.
    You can also wipe the iOS device by installing the FindMyiPhone app on another iOS device and using that app to wipe the device.
    There is not other way

  • How can I return my Curve, too many problems syncing and died on me with the last updates. no more patience, Canada Bell

    By the way your link for warranty do not work on your website....???
    Should I return it to Bell for General Failure ?

    Unfortunately, I'm in the same club, and also seeking a solution to the problem. I have approx 8000 songs and my ipod is a 3 mo. old 80 GB. I think I'm stuck working this out with Apple directly, which I'm dreading..and I'll be damned if I'm paying shipping charges for an IPOD that BEST BUY can't exchange beyond the 30 days post purchase, and can't do any more due to Apple's mandated service process. If a prompt resoluiotion with no further cost me is unavailable, I'd sooner throw the Ipod in the garbage, cancel my plans to by the Iphone, and live my life Apple free. Steven Jobs may know innovation and technology, but his knowledge of customer service could be his undoing one day.

  • How can i buil labview program to get the area and curvatures at top with video analyis?

    labview program building...
    Solved!
    Go to Solution.

    Please stick to your original thread:  http://forums.ni.com/t5/LabVIEW/how-can-i-get-the-area-of-a-ball-with-video-analyis/td-p/1630034
    Using LabVIEW: 7.1.1, 8.5.1 & 2013

Maybe you are looking for

  • Inserting new line in an array

    I need to insert a line of data into a file These are the steps I am taking 1)read the old file 2)put each line of old file into a single demention array element (248 lines) 3)add one more empty element to array (one more line) 4)shift the last four

  • P7NGM-digital : audio over HDMI ?

    Hello, I read elsewhere that for this board, P7NGM-digital, audio over HDMI was not possible ? Is it true ? As it is not working for me. JP

  • Linking Error

    Hi Gurus, In webi, while linking from detailed report to summary report, am getting an error. Data 10 11 12 33 while linking on 10, it is showing 33 reports which include 10. but the requirement to show is, while clicking on 10, it should display onl

  • Ale Custom filter group

    Hi All, I need to transfer cost centers via ALE. The issue is that the filter which I have to implement in the distribution model is based on company code (unlike controlling area which is the standard filter group for message type cosmas). I searche

  • Packet Data connection and Wireless Connection at ...

    I use Nokia for Exchange to push my mail this from 06Hr00 until 22Hr00 on a Nokia N82 latest firmware (same problem on the first firmware) When this connection is open i'm not able for example surf the internet through a wireless acces point at the s