Cloud Membership has reached its limit for hosted sites.

I have a full subscriptin to the cloud but when I try to push my new Muse site live Iget the following error: "Your Adobe Creative Cloud Membership has reached its limit for hosted sites."  After much research I have kind of figured out that when I upgraded my trial version of Muse only to a paid version of the Adobe Cloud, the system may think I am still a trial member.  I sent in a ticket but three says later it's still not fixed.  Anyone one else had this issue?

I have only ever used one email address. [email protected]  I'm not sure why it would should that I have even used one site since I have never published a website live.  I have only played around with 3 different sites... all of which should still be temporary.  The site I am trying to push live right now is outsidetheveil.com. 

Similar Messages

  • Why am I getting a "Adobe Creative Cloud Membership has reached its limit for hosted sites" message?

    I just tried to push my FIRST "free" Creative Cloud site live and got the message "Your Adobe Creative Cloud Membership has reached its limit for hosted sites. To push this site live you will need to purchase an additional hosting plan." I thought CC membership was supposed to give you 5 free hosted web basics sites?
    I am a premium BC partner and so far have my partner site and a paid Webcommerce site . In addition to the site I'm trying to put live I have 2 other trial sites (think they are designated as WebMarketing sites) of which one is expired. So where does the limit come in as this is so far my only WebBasics site?
    Please help as I need this live urgently (without additional expense).

    Hi Judy
    Appologies for this un-answered post, if any related issue is still active please reach out to our support directly.

  • Creative Cloud Membership has reached its limit for hosted sites

    I have had a paid Adobe Muse Creative Cloud membership for about 2 years now, and only used one website. I understand I can host up to 5. But for some reason when I try to launch a new site, I am told my membership has reached its limit for hosted sites. Can someone please tell me if I have some test pages I'm hosting (or something) and how I can erase them so I can make room for my new site. These are only personal sites so I do not need a business catalyst url for testing. I have the two domains active now and just need to be able to have both go live.
    My email is [email protected]
    The web page I'm trying to launch is www.ninetiesband.com. The only site that should be active right now is www.wearenightsbridge.com.
    Thank you for any help you can provide.
    -Mickey

    Hello Mickey,
    I checked your subscription details, and it looks like you're subscribed to Adobe Muse single app subscription, and not Creative Cloud subscription. When you sign up for Muse single app subscription (yearly), you get one free site to host with Business Catalyst. You only get 5 sites when you have a full Creative cloud subscription.
    Cheers
    Parikshit

  • I need to log into my icloud account but it has reached its limit can i reset this ?

    i cannot get my icloud account on my device it says it has reached its maximum amount of account

    No, that cant be reset.  You won't be able to create a new account using that device.  Your only options are to either re-use one of the accounts previously created on it, or create a new account using a different iOS device or Mac, if you have one.

  • DB2, Log File has reached its saturation point" DIA8309C Log file was full,

    Hello Experts,
    I have successfully installed a ECC 6.0 System-ABAP + JAVA (DB2 v9.5 windows server 2008-x64 bit).
    Kernel: 700 , Patch: 185 ; SP level : rel 700 , level 17.
    However now i suddenly cannot connect to database and SAP is down.
    C:\Users\dsqadm.DUCATI>r3trans -d
    This is r3trans version 6.14 (release 700 - 16.10.08 - 16:26:00).
    unicode enabled version
    2EETW169 no connect possible: "DBMS = DB6                              --- DB2DB
    DFT = 'DSQ'"
    r3trans finished (0012).
    db2diag.log:-
    ADM1823E  The active log is full and is held by application handle "51886".  Terminate this application by COMMIT, ROLLBACK or FORCE APPLICATION.
    "Log File has reached its saturation point" DIA8309C Log file was full.
    "Backup pending.  Database has been made recoverable.  Backup now required."  DIA8168C Backup pending for database .
    Also, regarding DB2 licensing,i have a query:
    db2licm -l gives the following:
    C:\Users\db2dsq.DUCATI>db2licm -l
    Product name:                     "DB2 Enterprise Server Edition"
    License type:                     "CPU Option"
    Expiry date:                      "Permanent"
    Product identifier:               "db2ese"
    Version information:              "9.5"
    Enforcement policy:               "Soft Stop"
    Features:
    DB2 Database Partitioning:        "Licensed"
    DB2 Performance Optimization ESE: "Licensed"
    DB2 Storage Optimization:         "Licensed"
    DB2 Advanced Access Control:      "Not licensed"
    DB2 Geodetic Data Management:     "Not licensed"
    IBM Homogeneous Replication ESE:  "Not licensed"
    Product name:                     "DB2 Connect Server"
    License type:                     "Trial"
    Expiry date:                      "10/19/2009"
    Product identifier:               "db2consv"
    Version information:              "9.5"
    I have applied both sap and DB2 license. Is everything ok regarding licensing of DB v9.5 for using with SAP?
    I am new to DB2 database and looking for expert guidance regarding the above mentioned issues.
    Thanks,
    Rakesh

    C:\Users\db2dsq.DUCATI>db2 get dbm cfg
              Database Manager Configuration
         Node type = Enterprise Server Edition with local and remote clients
    Database manager configuration release level            = 0x0c00
    Maximum total of files open               (MAXTOTFILOP) = 16000
    CPU speed (millisec/instruction)             (CPUSPEED) = 4,723442e-007
    Communications bandwidth (MB/sec)      (COMM_BANDWIDTH) = 1,000000e+002
    Max number of concurrently active databases     (NUMDB) = 8
    Federated Database System Support           (FEDERATED) = NO
    Transaction processor monitor name        (TP_MON_NAME) =
    Default charge-back account           (DFT_ACCOUNT_STR) =
    Default database monitor switches
       Buffer pool                         (DFT_MON_BUFPOOL) = ON
       Lock                                   (DFT_MON_LOCK) = ON
       Sort                                   (DFT_MON_SORT) = ON
       Statement                              (DFT_MON_STMT) = ON
       Table                                 (DFT_MON_TABLE) = ON
       Timestamp                         (DFT_MON_TIMESTAMP) = ON
       Unit of work                            (DFT_MON_UOW) = ON
    Monitor health of instance and databases   (HEALTH_MON) = OFF

  • Number Range RF_Beleg has reached critical limit

    Hi
    While doing the customer clearing in AR , I got the error as "Number Range RF_Beleg has reached critical limit ". Can anybody suggest me how to fix this error.it looks some allocated number range has exhausted.
    Thanks
    SN

    Hi Sathya,
           You may have to follow the following steps:
    i) You may know the document type of the document that generates this error, say DZ, Pls goto <b>OBA7</b> and note the Number Range defined for the same.
    ii) Having noted the Number Range, goto <b>FBN1</b>. Click on the <b>Change Status Button.</b>
    iii)  Locate the Co Code, Fiscal Year and the Number Range (That u got from Step i). Select that line and change the current number to zero.
    iv) Come back to the main screen of FBN1. Again click onto the <b>Change Interval Button</b>. Select the same record as in iii) and change the From & To Numbers. <b>The defined numbers should not overlap with any other number range for any other document type.</b>
    v)Save it.
    Try posting again.
    Hope this helps.

  • What does "Your Creative Cloud membership has transitioned from Paid to Free" mean?

    What does "Your Creative Cloud membership has transitioned from Paid to Free" mean?

    Hi Don
    As you've cancelled your paid membership you will continue to have access until June 28th.  After that you will only have access to certain services associated with the free level of membership.
    Please check the FAQ for further details: Adobe Creative Cloud – FAQ
    Thanks
    Bev

  • Wy does acrobat no more work, when my Cloud membership has expired?

    My Cloud Membership has expired. My acrobat and all th other programs from Adobe do no more work. Wy?

    Hi AdobeGlobi,
    Welcome to Adobe Forum,
    The Adobe Creative cloud is a subscription based product where you pay monthly with an annual commitment.
    When the subscription expires all the CC concerned products will stop working.You need to keep the subscription active to keep using them.
    If you have any previous version of Adobe product installed for e.g Acrobat 9/8 etc. they will continue to work.
    Regards,
    Rajshree

  • Can you tell when a loaded SWF has reached its final frame?

    I used loadMovie to load an external SWF into the bottom-half
    of a main "shell" swf. When that loaded SWF finishes playing (it's
    just an animation), I need to populate a text field with the word
    "DONE" . The text field resides on the _root, so I need some way to
    know when the loaded SWF has reached its last frame...
    This would obviously be easy if I had the .FLA of the loaded
    SWF because I could just write the actionscript on the last frame
    of that SWF to populate the _root textfield. Alas, I do not have
    the source FLA of that loaded SWF, so I need some way to have the
    main "shell" SWF/FLA know when that loaded SWF has reached its end.
    Is this possible???
    Thanks!!!

    DIY_Lobotomy,
    > The reality of my situation is that there's a "menu" of
    sorts that
    > gets loaded into "contentClip". This "menu" has a bunch
    of links.
    So far, so good.
    > When clicked, each link loads a DIFFERENT swf into
    "contentClip".
    > It is THOSE swfs that I need to note the end of.
    That's still okay.
    > So, there's actually more than one, and they're not
    exactly being
    > loaded directly from my main movie, since they're
    actually loaded
    > based on a link being clicked in the movie that is
    currently loaded
    > into "containerClip"
    The concept is still the same, no matter what. No matter how
    deep the
    one-clip-loads-another chain goes, you have to keep taps on
    each chain link.
    When the final link has loaded, you'll be able to make your
    object reference
    to that movie clip. That movie clip -- because it's an
    instance of the
    MovieClip class -- will have the _currentframe and
    _totalframes properties.
    You'll just be checking *that* cliip's properties instead of
    the one named
    contentClip in my own example.
    You can loop using onEnterFrame or, if you prefer, with
    setInterva().
    That doesn't much matter either, so long as you repeatedly
    poll the deepest
    clip to test its current frame against its last frame (this
    all assumes that
    the clip being tested is a linear animation whose end
    corresponds to its
    last frame; otherwise, you could check _currentframe against
    any arbitrary
    frame number).
    > I hope that wasn't too confusing! Do you still have a
    solution???
    Not too confusing to understand, but it might be confusing
    to route
    through in practice. Not confusing, actually, but meticulous
    ... you'll
    have to be careful with your pathing. Nested movie clips are
    very much like
    nested folders on your hard drive. Their instance names
    relate to the
    folder names.
    Now, if that menu doesn't have an instance name you provided
    -- or if
    any fork along the path has an instance name you can't
    control -- you can
    still reference the nested movie clips. If you test your file
    in the
    Debugger panel, you'll see all the instances laid out in
    hierarchical order.
    You'll see that automatic instance names are provided
    (something like
    "instance1", "instance2", etc.).
    David Stiller
    Contributor, How to Cheat in Flash CS3
    http://tinyurl.com/2cp6na
    "Luck is the residue of good design."

  • The partner transaction manager has disabled its support for remote/network transactions....When inserting during trigger in linked server

    Hi All,
    I am getting below error while inserting into Linked Server (sql2012) thru trigger from sql2008 ....However if i insert the same thru Store Procedure it is inserting successfully....MSDTC service is started on both sql server machines....also both machines
    rebooted....but still i am facing this error.
    OLE DB provider "SQLNCLI" for linked server "XXX.XXX.XXX.XX" returned message "The partner transaction manager has disabled its support for remote/network transactions.".
    Msg 7391, Level 16, State 2, Procedure ins_test, Line 11
    The operation could not be performed because OLE DB provider "SQLNCLI" for linked server "XXX.XXX.XXX.XX" was unable to begin a distributed transaction.
    Could assist to resolve. 
    Regards
    Shehzad

    Hi SHzKhan,
    According to your error message, we need to verify if you configure the MSDTC correctly, When you have more than one SQL Server involved in a Distributed Transaction, you need to make some changes to the default configuration of MSDTC for these distributed
    transactions to succeed. There is a detail about recommending MSDTC settings for using Distributed Transactions in SQL Server, you can review the following article.
    http://support.microsoft.com/kb/2027550/en-us
    There is a similar issue about error 7391, you can refer to the following link.
    http://dba.stackexchange.com/questions/30235/msg-7391-distributed-transactions-dtc-on-sql-server
    Regards,
    Sofiya Li
    Sofiya Li
    TechNet Community Support

  • HT1420 One of my computers had to re install and now I need to authorize my new computer but keep telling me I reached the limit for 5 computers. What do I do?

    One of my computers had to re install and now I need to authorize my new computer but keep telling me I reached the limit for 5 computers. What do I do?

    I have the same problem. What load of BS.
    I feel so sorry for people that switched over from PC to mac because they were misled to believe that 'macs just work'.
    Imagine someone without a degree in patience and computer engineering ever being able to work this problem out.
    All I want to do it sync my iPad with some movies that I bought. NOPE I have apparently authorized more than 5 computers which is ridiculous because I own.... 1 computer. LOL.
    Really bored with Apple's paranoia, ego and illogical control.

  • HT4847 If I have a 16 gig phone but buy more i cloud can I down load more if my phone had reached its limit memory

    Hi guys
    I have a 16 gig phone which is at its limit I want more storage if you but more I cloud will that free up my internal memory for me to down load more
    Thanks

    Your music is only available to stream and play from iCloud if you subscribe to iTunes Match.  Otherwise, only music purchased from the iTunes store is only available to redownload, and only if still available in the iTunes store. 
    Your music should be stored in your iTunes library and you can use iTunes to manage which songs you sync to your phone at any given time.  You can do this on the Music tab of your iTunes sync settings, where you can choose to sync only selected artists, albums, playlist and genres; or by check Sync only checked songs and videos on the Summary tab of your iTunes sync settings, then checking only the songs you want on your phone prior to syncing.

  • Can I cancel my monthly Creatve Cloud membership and then sign up for the Photographers Plan?

    I have had the Creative Cloud Membership since it was first offered. I use only Photoshop and want to change to the less expensive Photographers Plan. Is this possible?

    Hello Tamera,
    here are two links where you can cancel the membership:
    http://helpx.adobe.com/x-productkb/policy-pricing/cancel-membership-subscription.html and maybe
    http://helpx.adobe.com/x-productkb/policy-pricing/membership-subscription-troubleshooting- creative-cloud.html
    If necessary and for further questions click through http://helpx.adobe.com/contact.html and if "open" please use chat, I had the best experiences. I quote from Adobe's employee Preran: The chat button is activated as soon as there is an agent available to help.
    On the other hand you have to look at Subscription Terms >>> http://www.adobe.com/misc/subscription_terms.html to see the conditions for a (early) cancellation.
    After that procedure you can conduct your other membership.
    Good luck!
    Hans-Günter

  • How to set version limit for entire site collection

    Hi,
    We have more than 500 document libraries in one site collection. I see some of them have more than 50 versions & taking lot of storage space. So planning to limit the version's to 3 Major and 3 Minor for entire site collection. How can we do that? I
    know we can set to individual library by how can we do that for entire site collection?
    Thanks
    Rithu.
    Rithu

    The version limit is a library specific setting, so you'll need to use PowerShell to set the property value on each library in every site in the site collection.  Here's a sample script that sets if for one library.  You'll need to expand the script
    to walk the sites recursively and run this for every library.  
    https://consultantpoint.wordpress.com/2012/06/15/powershell-setconfigure-document-library-with-majorversionlimit-majorwithminorversionslimit-require-to-checkout-before-editing/
    Please Note: Changing these settings won't delete old versions.  That only happens after each item in the list or library is edited.  
    Paul Stork SharePoint Server MVP
    Principal Architect: Blue Chip Consulting Group
    Blog: http://dontpapanic.com/blog
    Twitter: Follow @pstork
    Please remember to mark your question as "answered" if this solves your problem.

  • How to enable a reminder for when a shared review has reached its end date?

    I thought Acrobat will send the initiator of a shared review a reminder before the "end review" date is reached. This will allow him/her to check with the reviewers how they are going.
    It seems we aren't receiving that reminder anymore.
    When I setup the shared review process initially I thought I saw a reminder that the review is ending in a day or so.
    Lately it looks like that has stopped...
    We use Acrobat X Pro & Std, SharePoint and Outlook 2010
    Appreciate your help

    Acrobat doesn't send scheduled emails and never has done. You have the option to manually 'email all reviewers' via the Tracker dialog, and of course when someone opens the PDF they'll be told the deadline.

Maybe you are looking for