How can i input rtd voltage and processing usign lv

I want to input voltag from RTD and then want to diaplay the graph on the screen. If any other technique to simulate RTD graph without sensor
I am trying for generating with RTD's equation and putting in Equation vi but i cant get wave form
please help me

Good morning LC,
I recommend that you use the Simulate Signals Express VI to simulate the signal from your RTD. It is located on the Express Function pallet.
Have a good day,
NathanT

Similar Messages

How can i synchronize analog output and analog input timings to generate and measure voltage at the same time.

how can i synchronize analog output and analog input timings to generate and measure voltage at the same time.

Read this Tutorial
http://zone.ni.com/devzone/cda/tut/p/id/3615#toc3
And also refer to this link where You have repeated this question.
PS: Please stick to one thread. That way, its easier to keep track of your query and answers

How can I let my servlet to process Chinese Character as an input?

How can I let my servlet to process Chinese Character as an input to my simple database which is an Excel file. I have tried before and all my input values become question marks.
Please give me some advise, thx!

input chinese?��
that may result from the tomcat or other web server

How can I input read a line from a file and output it into the screen?

How can I input read a line from a file and output it into the screen?
If I have a file contains html code and I only want the URL, for example, www24.brinkster.com how can I read that into the buffer and write the output into the screen that using Java?
Any help will be appreciate!
======START FILE default.html ========
<html>
<body>
 
<center>

Welcome to a DerekTran's Website! 
Underconstructions.... 
 </center>
 
Hello, 
 
I've been using the PWS to run the website on NT workstation 4.0. It was working
fine. 
The URL should be as below: 
http://127.0.0.1/index.htm or http://localhost/index.htm
And suddently, it stops working, it can't find the connection. I tried to figure
out what's going on, but still NO CLUES. Does anyone
know what's going on? Please see the link for more.... I believe that I setup
everything correctly and the bugs still flying in the server.... 
Thank you for your help.

PeerWebServer.doc
 
CannotFindServer.doc
 
HOSTS file is not found
 
LMHOSTS file
 
How to Setup PWS on NT
 
Issdmin doc
Please be patient while the document is download....
 If you have any ideas please drop me a
few words at [email protected] 
 
 

 
</body>
</html>
========= END OF FILE ===============

Hi!
This is a possible solution to your problem.
import java.io.*;
class AddressExtractor {
 public static void main(String args[]) throws IOException{
 //retrieve the commandline parameters
 String fileName = "default.html";
 if (args.length != 0) fileName =args[0];
 else {
 System.out.println("Usage : java AddressExtractor <htmlfile>");
 System.exit(0);
 BufferedReader in = new BufferedReader(new FileReader(new File(fileName)));
 StreamTokenizer st = new StreamTokenizer(in);
 st.lowerCaseMode(true);
 st.wordChars('/','/'); //include '/' chars as part of token
 st.wordChars(':',':'); //include ':' chars as part of token
 st.quoteChar('\"'); //set the " quote char
 int i;
 while (st.ttype != StreamTokenizer.TT_EOF) {
 i = st.nextToken();
 if (st.ttype == StreamTokenizer.TT_WORD) {
 if (st.sval.equals("href")) {
 i = st.nextToken(); //the next token (assumed) is the '=' sign
 i = st.nextToken(); //then after it is the href value.
 getURL(st.sval); //retrieve address
 in.close();
 static void getURL(String s) {
 //Check string if it has http:// and truncate if it does
 if (s.indexOf("http://") > -1) {
 s = s.substring(s.indexOf("http://") + 7, s.length());
 //check if not mailto: do not print otherwise
 if (s.indexOf("mailto:") != -1) return;
 //printout anything after http:// and the next '/'
 //if no '/' then print all
 if (s.indexOf('/') > -1) {
 System.out.println(s.substring(0, s.indexOf('/')));
 } else System.out.println(s);
}Hope this helps. I used static methods instead of encapsulating everyting into a class.

How can we change the description and name of Process Chain in Production

Guys,
Can anyone please help me to understand how can we change the name and description of the process chains in Production in SAP BI?
Regards

open the process chain and go to edit mode and then press Ctrl+F6 for a rename... you can only rename the description and not the technical name.
If you want to edit PC in production - esp one which has been transported - go to transport connection and change the object changeability for the same to everything changeable ( right click on the same to get this option )

How can i know if the sync process is done after a bookmark adding or so such and when it is processing , immediately after changes or what?

how can i know if the sync process is done after a bookmark adding or so such and when it is processing , immediately after changes or what?

I don't know whether you solve your problem or not! Anyway, I have the same problem. The program hangs when getInputStream is called.
DataInputStream dis = new DataInputStream(request.getInputStream());
If you have the answer, please let me know. Thanks!!

How can I capture live video and still image by a DirectX compatible USB webcam using LabView ?

Dear forum members
   I'd like to design a user interface which shows a live video and capture still images for it by a DirectX compatible USB webcam using LabView or NI Vision Toolkit, how can I do this ? and If this is possible How can I reach the webcam DirectX filter properties and set them using LabView ? I would be grateful to anyone Who lead me to the correct solution.
    Sincerely
    Cem DEMiRKIR

Cem,
    With our example programs you can acquire and save an image (IMAQ >> File Input and Output >> Snap and Save to File.vi) from one camera, if you double the VI's to create the image and the image task, you can easily have one program acquire and save for two cameras.
    I may need more information on what you mean by calibration. Do you mean basic camera setup? That can be done in Measurement and Automation Explorer by setting up the options within the IMAQ settings for each camera. Or do you mean more complex calibration for special types of images? The more description of what you mean, the better I will be able to help you get it done. You mentioned zoom and motion parameters, what kind of motion? Our vision drivers only control triggering the camera to acquire, then analyzing, processing and displaying the resulting image.
    If you have more details on exactly what you want to do, that would be great. Let me know if you have more questions, thanks!
-Allison S.
Applications Engineering
-Allison S.
Calibration Services
Product Support Engineer

HT204053 I share an iTunes account with my daughter, I just got an ipad and need to set up with my own I'd for iCloud sync how can I keep my apps and music?

I share an iTunes account with my daughter, I just got an ipad and need to set up with my own I'd for iCloud sync how can I keep my apps and music?

ColleenMcG wrote:
You can continue to share the same iTunes account ID with your daughter and set up a separate iCloud account with a different ID.
=> is this a different iCloud account for each device? I thought iCloud account ID had to match some iTunes account ID, for which we only have one i Tunes account?
You need to set up a separate iCloud account for each person that does not want to share their iCloud data. If you share an iCloud account with someone, any data you both sync with the shared account is merged, and you end up with each other's data on your device(s). If, for example, you owned two devices and someone else in the family also owned two devices, you would both want your own iCloud accounts, and you would each set up your personal iCloud account on the two devices you own. In other words, you want a separate iCloud account for each person to be used on the devices they own. Each iCloud account has to have a separate Apple ID. The ID does not need to be the same as the ID used for iTunes. Many families perfer to share the same iTunes account/ID, but maintain separate iCloud accounts with different IDs to keep there data separated.
ColleenMcG wrote:
It does not need to be the same as the ID used for iCloud.
=> what ID, iTunes? So I can have a separate iCloud account "only" ID which I also assume must be some [valid] email address? The children currently do not have email accounts anywhere.
Yes, I was referring to the iTunes ID not needing to be the same as the ID used for iCloud. In order to set up an Apple ID your children will need to have a valid email address that can be verified by Apple. Apple requires this so they have a way of contacting the owner if there is a problem with the account, such as when you may need to reset the password on the account. When you set up the ID, Apple will send a verification email to this email account and you will need to click on the verificating link in the email to complete the process. If they don't currently have an email account you can just set one up with gmail or another free email hosting service. They don't have to use the account but you will need it to set up the ID.

HOW CAN I GET MY CHANGE IN PROCESSING(got it)?

Hi all....
 please understand my requiement and get back with your valueble answers...
iam having one table control in one of my screen....
in that....table control it contains three fields.... so as we know three columns...
middle column is for second field...
here i am changing first entry ( 1st row of second column) manually... and clicking one push button of my screen to do some caluclation part combine with table control entries...
ex: table controls looks like.....(before)
 1 100 ab
 2 200 gh
 3 300 vf
 4 400 fh
 .. .... ...... etc
now manual i changed above like....(after)
 1 150 ab <------ only change
 2 200 gh
 3 300 vf
 4 400 fh
 .. .... ...... etc
So... here my problem is iam getting my caluculation part with that field as 100 only.... not as 150,
even i debug this variable with defferent conditions like......
 READ TABLE ITAB WHERE ITAB-F1 = 1.
SO HOW CAN I GET MY CHANGE IN PROCESSING? WHERE I HAV TO MODIFY MY PROGRAM?
(edited: prevoius ly this value is capturing correctly...because that calculation part is in the module which is added between chain and endchain)
Expect Max marks,
Thanks,
Naveen
Edited by: Naveen Inuganti on May 27, 2008 11:57 AM
dont worry guys i got the answer.... we have to catch that varible in the chain and endchain operater.... by using module.....
thank you all...
bye...
Edited by: Naveen Inuganti on May 27, 2008 3:41 PM
Edited by: Naveen Inuganti on May 27, 2008 4:00 PM
Edited by: Naveen Inuganti on Jun 13, 2008 11:44 AM

Hi,
I think f2 is a key field in table.So 150 considered as new entry.this case you have to keep 100 for delete from table then add 150 entry.i think you are getting update in itab.But not in table.If you are not getting itab, post your code to check

Where or how can we input the Intermediary Bank info in Vendor Master?

Hi
I would like to know if there are specific fields were we can include information of an Intermediary Bank when we are creating the Vendors Account Information.
For instance, if we have the following information, how and where should we input the Intermediary Bank information?
Vendor's Name:    ABY COMPANY
Vendor's Address:    Miami, Florida
Vendor's Account:    123789456
Vendor's Bank Name:    CITIBANK N.A.
Vendor's Bank Address:   Miami, Florida
Vendor's Bank BIC Code:   CITIUS33MIA
Vendor's Bank ABA Code:   266086554
Vendor's Bank Intermediary Bank Name: CITIBANK, N.A.
Vendor's Bank Intermediary Bank Address: New York, New York
Vendor's Bank Intermediary Bank BIC Code: CITIUS33XXX
Vendor's Bank Intermediary Bank ABA Code: 021000089
Where or how can we input the Intermediary Bank information?
Tks in advance for your reply
reg
vishnu

Hi
Thanks for your inputs
Actually we need to create a link between Vendor mail bank and Vendor Intermediary bank, is there any possiblility in Vendor master data?
As you explained i checked the settings, how can i create link between from main bank to intermediary bank?
reg
Vishnu

How can I input Chinese in the Playbook?

How can I input Chinese in the Playbook? such as in browers and contact

I think the only way to do that is to download an app, that lets you input pinyin for instance, then copy and paste from there. The last time I checked, there are 3 apps in the app world, all by the same person. I've no idea what the difference between them is.

In Yosemite, I can;t operate for more than a few minutes with Keychain or Safari asking for my login password. How can I turn this off, and still be safe?

Using Yosemite, I an't seem to work for more than a few minutes without being asked for my login password. Keychain wants it, Safari wants it, iCloud wants it..the list goes on. Then in 10 minutes or so, they all want it again. Passwords are being stored by Safari as usual, but new tabs or pages bring up the request. How can I turn this off and still have protection?

Tutorial: Resolving Keychain Issues
If you can't access your keychain, or forget your password If you can't get into your keychain file because you've forgotten your password or the keychain file appears to be corrupt, there are a couple of options.
First, if you've forgotten your password, you can use the "Keychain First Aid" utility to make the keychain password the same as the login password. This can be accomplished via the following process:
1. Open Keychain Access (located in Applications/Utilities)
2. Go to the "Keychain Access" menu and select "Preferences"
3. Click the "First Aid" tab
4. Make sure the "Synchronize login keychain password" box is checked
5. Close the Preferences window
6. Go to the "Keychain Access" menu and select "Keychain First Aid"
7. Enter your username and password
8. Click the "Repair" button
The second option is to completely delete your keychain then recreate it. This routine is useful if your keychain appears to be corrupt or otherwise inaccessible. This can be accomplished as follows:
1. Launch Keychain Access (located in Applications/Utilities)
2. Click "Show Keychains" in the lower-left corner of the window.
3. Select the problematic keychain from the left-hand pane.
4. Navigate to the "File" menu and select "Delete Keychain '(name of keychain)'"
5. Check all options for deletion and press "OK"
6. Create a new keychain by going to the "File" menu, then "New" and selecting
"New Keychain"
7. You can now make this keychain your default if you desire by selecting it, then
going to the "File" menu and selecting "Make '(name of keychain)' Default"
Login as root and perform repair In some cases, problems with keychains can only be resolved when logged in as the root user.
First, you want to enable the root user:
1. OS X Mountain Lion: Enable and disable the root user
2. OS X Lion: Enable and disable the root user
3. Mac OS X 10.6: Enabling the root user
4. Enabling and using the "root" user in Mac OS X
After enabling the root user, and logging in under this account, again open Keychain Access. First attempt repairs using Keychain First Aid, and failing that, delete then recreate the keychain as described above while logged in as root.
Persistently asked for stored passwords If you are persistently asked for passwords in various applications that you have specified should be remembered in a keychain, your "login" keychain may not be active for one reason or another.
Navigate to ~/Library/Keychains/ (this is the Library folder inside your user's home folder). Find the file named "login.keychain" and double-click it.
Failing that, select the "login" keychain within the Keychain Access application and make sure it is the default keychain by going to the "File" menu and selecting "Make 'Login' Default"
Turn off Keychain synchronization in applications having problems If specific applications are experiencing issues when accessing password-protected material, the Keychain may be to blame.
The above comes from an article published on MacFixit.com.

How can i get the time and result together show in one Array or in Cluster?

hello everyone i am a new user .I want to get the time and voltge form a Generater. How can i get the time and result together show in one Array or in Cluster?When i selecte the first(or third...) result then in the front panel display the time and the voltge.Thank you!
I post the time and voltge NOT together photo
Attachments:
12345.GIF ‏54 KB

You can create an array of clusters with one element being the time and the other being the voltage, like so (using the "Get Waveform Components" function):
Message Edited by smercurio_fc on 10-17-2007 03:15 PM
Attachments:
pic.PNG ‏11 KB

How can you configure mail settings in process chains?

HI Experts,
please let me know how can you configure mail settings in process chains?

Dear Suman,
To initiate the mails we first need to have SMTP connection. To check the same go to so00 and try sending mails to ur ID. If is successful it states that u have the SMTP access.
To create mails to Process chains:
Right Click on the Process varient select the Create Message in the context menu.
Select the type of mail i.e for successful, Error, Anyways.
Then follow the screens.
Note: The recipient type should be Via Internet.
Hope this helps u.
Regards,
Kishore.Pulla

How can I restore move function and type tool which abruptly became balky with Elements 8 with OS10.10.2?

How can I restore move function and type tool which abruptly became balky with Elements 8 with OS10.10.2?

Follow-up: I'm worried about performing any actions without input, because I don't want to back myself into a corner.
Will resetting Firefox fix the problem (instead of creating a new places database)? https://support.mozilla.org/en-US/kb/reset-firefox-easily-fix-most-problems
According to this article, a reset will keep browsing history, which should allow me to access my lost tabs IF it will also fix my database problem.

How can i input rtd voltage and processing usign lv

Similar Messages

Maybe you are looking for