How can i launch new Brower window?

Dear friends;
I am able to open Browser through java code.
Problem is which is opening with existing Browser.
But i want to open with new Browser.
Can you clear me?if any code is there please send to me.
Thank You

try {
     Runtime.getRuntime().exec("iexplore" path+ "exaple.pdf");// firefox, ie, etc...
} catch (IOException e) {
     e.printStackTrace();
}It is getting problem
Caught:java.io.IOException :CreateProcess iexplore error=2
but one more thing is open with default browser which is in that OP
Thank you

Similar Messages

  • Drill to link - How can integrate the new browser window inside the report

    Hi, I'm using Discoverer Plus/Viewer 10.1.2.48.18 and I just created successfully a "Drill to Link to an Internet Page" related to my field "Ticket Id"
    So, when, from Viewer, I select the link, a new tab from a new browser session is opend and I see all the details related to the Ticket Id chosen.
    This is right because on the manual is written:
    Discoverer behaves as follows: if you drill out to an Internet page, Discoverer displays the Internet page in a new browser window.
    Now my question is this: is there a way or a workaround to integrate the new browser window's content inside my report ?
    In other words, instead to see the all the Ticket id details (graphs included) in a new browser window, my customer asked me to see these details inside the same report, just below the field with the link.
    Any help will be appreciated
    Thanks
    Alex

    Hi, I'm using Discoverer Plus/Viewer 10.1.2.48.18 and I just created successfully a "Drill to Link to an Internet Page" related to my field "Ticket Id"
    So, when, from Viewer, I select the link, a new tab from a new browser session is opend and I see all the details related to the Ticket Id chosen.
    This is right because on the manual is written:
    Discoverer behaves as follows: if you drill out to an Internet page, Discoverer displays the Internet page in a new browser window.
    Now my question is this: is there a way or a workaround to integrate the new browser window's content inside my report ?
    In other words, instead to see the all the Ticket id details (graphs included) in a new browser window, my customer asked me to see these details inside the same report, just below the field with the link.
    Any help will be appreciated
    Thanks
    Alex

  • How can I make new finder windows open in front

    Since upgrading to Lion, whenever I open a new window, installer, DMG, etc, it opens BEHIND all the other windows and I have to move windows out of the way in order to interact with application or whatever I have opened.
    I know this has to be a setting somewhere but I can't tell where it is and have no luck searching for the answer.
    Thanks,
    Alan

    I know this may not help but when u open finder instead of moving all the windows when u open finder right click on it put show all windows and u can click on finder for easier access
    Leo

  • How can I change the default window size of a new message permanently?

    The mail window opens up very small and every time I must increase the size manually. I want to be able to set it so it opens larger or at least opens to the saem size as a previous mail window, which is what Mail used to do.
    Also, can anyone tell me how to stop that new mail window from opening on the bottom left of my screen? I need to move it in orde to increase the window size. So, 2 default actions that are a psin to constantly deal with.
    Is there any guru out there who has had this problem and solved it? Thanks!

    http://kb.mozillazine.org/Font_settings_in_Thunderbird

  • How can I install new windows on NB200-10z without a CD drive?

    Hi,
    I have a mini laptop "Toshiba nb200-10z" and it doesnt startup anymore.
    I would like to do a recovery, but it also doesnt work.
    I know there is a shortcut like press the 0 button when the laptop is starting up.
    With this shortcut you can start the recovery to reset the software.
    But when I press the 0 button it gives me an error.
    So I think the recovery drive/partition is lost.
    How can I install new windows on this minilaptop without a CD drive?

    I have found a much easier way to install Windows 7 from a USB Flash drive. Unlike other methods where you have to write complicated commands, this method can be completed even by those who have very little computer background.
    The whole process takes only two steps, run UNetbootin, load the Windows 7 ISO file, and finally restart your computer.
    Before you begin, you will require the following:
    USB Flash Drive (4GB minimum)
    Windows 7 ISO Image file
    UNetbootin
    Note: If UNetbootin doesnt work, try out the Microsofts official tool called Windows 7 USB/DVD Tool.
    Now insert the USB drive, run UNetbootin, and select Disk Image as ISO. Browse your local drive for Windows 7 ISO that you downloaded and click Open. Now Select Type as USB and choose the drive. Once done, it will look like a bit similar to the screenshot shown below.
    Click OK and it will begin extracting all installation files to the USB drive. The whole process will take some time (10-15 minutes), so have patience.
    Once the installation is complete, reboot your computer. Now while your system is starting up press the appropriate button (usually F1, F2, F12, ESC, Backspace, or Escape) to bring up Bios Boot Menu.
    Change the startup order to boot USB by default, usually you will have to press F6 to move the selected USB device on top. Once done, save changes and restart the system.
    +Message was edited: link has been removed+

  • I got a new lenovo desktop windows 8.1,installed itunes and synced my ihone 4 no problems. then i imported a cd of songs which showed up in recently added but not in main library ,therefore it did not sync to the iphone. how can i get new songs to ap

    i got a new lenovo desktop windows 8.1,installed itunes and synced my iphone 4 no problems. then i imported a cd of songs which showed up in recently added but not in main library ,therefore it did not sync to the iphone. how can i get new songs to appear in the main library and sync properly
    thanks
    john

    Check the songs are really not in the Music section of the library by clicking the magnifying glass in the search box and unticking Search Entire Library if it is ticked, then typing in the name of the album. If the tracks still don't show try closing iTunes and deleting a hidden file called sentinel from inside your iTunes folder. This should make iTunes run an integrity check on the database when you start it again. Make sure the tracks are checked before you try syncing again.
    tt2

  • How can I get rid of windows 8.1 in my new lenovo and get windows 7 put in?

    How can I get rid of Windows 8.1 on my new Lenovo laptop and install Windows 7?

    Hi,
    I'll assume your laptop was upgraded from Windows 7 to Windows 8.1
    1. Start by copying all your personal folders (Documents, Pictures, Music, Videos, Favourites, local databases,
    hosts files, etc) into an external disk, DVD, tape, whatever.
    2. If I were you, I wouldn't use Windows 8.1 backup tool, I'm not sure Windows 7 Restore applet will be able
    to read a Windows 8.1 backup.
    3. Check that you have all the necessary licenses, CDs and executables to reinstall your former Windows 7
    applications, components, browsers, plugins, Java, .NET Frameworks, etc. Be aware that some applications require
    to keep same hostname and/or same IP and/or or same local username (or all of them) as they were on the original
    Windows 7 machine.
    4. Check that you have your Windows 7 CD and license handy.
    5. Do you have a Windows 7 image backup of your laptop (prior to the Windows 8 upgrade)?
    5.a Yes? Then restore that image and restore your personal folders on top. You might need to
    install or reinstall some of the applications I mentioned on #3
    5.b No? You'll have to format your laptop, install Windows 7 from scratch, create your local
    user with administrative rights, install SP1, install necessary updates, reinstall all your
    applications and finally restore your personal folders.
    Sebastian Sajaroff Senior DBA Pharmacies Jean Coutu

  • How can I add new content in iDVD to a DVD-RW disc which has ample remaining free space? After preparing the new video for burning and clicking on Burn to iDVD, I get a window saying the disc's already recorded and that I can either Erase or Eject.

    How can I add new content in iDVD to a DVD-RW disc with a video previously successfully recorded on it? (The disc has ample remaining free space.)
    After preparing the new video for burning and clicking in the File menu on Burn to iDVD, I get a window saying the disc's already recorded and that I can either Erase or Eject. My assumption has been that iDVD would automatically find the free space and continue with the new recording from there. I'd be grateful if anyone can shine light on this.

    There are, but not with a DVD written as a movie disk. It must be closed when completed, or it doesn't work.
    Apple's built in Burn utility also automatically closes any data CD, DVD or Blu-ray disk you burn. Doesn't matter how much space is unused, you can't use it. You'd have to use a more advanced disk creation app, such as Toast Titanium. I then have the option of choosing to write the data as a session:
    I can keep doing this until the disk is full. If I've written five sessions to the disk, when I put it in the drive, five CD/DVD icons will appear on the desktop since the OS will treat each session as if they are separate physical disks. At any point you choose Write Disk when writing a group of data, that means you're closing the disk, and again can't add anything after that. So if I had written two sessions, and the third was Write Disk, it's over. I can't put anything else on that disk.

  • I have hp 430 laptop,how can i re install the windows 7, if i not have original window on my laptop

    I have hp 430 laptop,how can i re install the windows 7, if i not have original windows on my laptop. i have oem number,
    But i have troubol to finishing installation of window.

    Originally the Notebook will have the Recovery Partition and that would give you an option to create a set of Recovery Disk. If you have not created those Recovery Disks when the Notebook was in working condition we cannot do that right now
    As of now if you need to recover your Notebook with the new Operating System you can check if the Recovery Partition is in a working condition or not, If yes you can easily recover/restore your Notebook
    If Recovery Partition is corrupted
    You need to call HP Technical Support and request for a set of Recovery Disks , So you can recover/restore your Notebook at the earliest
    OR
    You need call up Microsoft and purchase an Operating System with the License Key, So you can recover/restore your Notebook at the earliest
    I strongly recommend you to Contact HP Technical Support over the Phone for further assistance without any delay
    Hope this helps, for any further queries reply to the post and feel free to join us again
    **Click the KUDOS star on left to say Thanks**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.
    Thank You,
    K N R K
    Although I am an HP employee, I am speaking for myself and not for HP

  • How can I connect to a windows server from a mac book pro

    How can I connect to a windows server from a mac book pre?

    I have a Dell Power Edge T110 ii in the office that has files and software I need to access when away from the office, when I am on the road I use a mac book pro and an iPad.
    I am sorry if I am being a bit vague but this is all new to me, I have tried 3 IT guys but they can not find a way.
    Any help is greatly appeciated.

  • How can I start a second window of a second profile through the command line?

    I have two profiles set up, 'default' and 'second'. If both are already running how can I start a second window of profile 'second'?
    firefox -p 'second' : opens a new window of the default and,
    firefox -p 'second' -no-remote : tells me that firefox is already running.

    I don't think that this is possible.<br />
    You need to open this second instance (Firefox profile folder) with the -no-remote command line switch and that makes it impossible to open external links via the command line or via a double-click.<br />
    You can only open a link in such an instance by dragging the link on the tab bar of that Firefox window.

  • How can I run 2 Dreamweaver windows at the same time?

    How can I run 2 Dreamweaver windows at the same time on my
    PC?
    basically I have 2 monitors and I want to edit CSS on one
    monitor and have the html page open on the other so I can quickly
    look from one to another with in a split second instead of taking
    that extra time to switch back and forth using the tabs at the top,
    I know I should probably invest into a mac so i can work out side
    of the Dreamweaver application window and I will in the future but
    is there any way i can do this on my windows XP pro PC?
    Thank you
    Maurice

    Open the CSS in DW, and use F10 to open the Code Inspector.
    Place the
    latter as needed.
    Murray --- ICQ 71997575
    Adobe Community Expert
    (If you *MUST* email me, don't LAUGH when you do so!)
    ==================
    http://www.projectseven.com/go
    - DW FAQs, Tutorials & Resources
    http://www.dwfaq.com - DW FAQs,
    Tutorials & Resources
    ==================
    "Random_Yggdrasil" <[email protected]> wrote
    in message
    news:gi2htb$j4j$[email protected]..
    > How can I run 2 Dreamweaver windows at the same time on
    my PC?
    > basically I have 2 monitors and I want to edit CSS on
    one monitor and have
    > the
    > html page open on the other so I can quickly look from
    one to another with
    > in a
    > split second instead of taking that extra time to switch
    back and forth
    > using
    > the tabs at the top, I know I should probably invest
    into a mac so i can
    > work
    > out side of the Dreamweaver application window and I
    will in the future
    > but is
    > there any way i can do this on my windows XP pro PC?
    >
    > Thank you
    > Maurice
    >
    >
    >

  • How can I get a small window to open when a link is clicked (AS2)

    Hi i,m developing a HTML site and used one animated flash button(AS2) I want a small sized window to open when a user clicks on a button.
    The window will contain information that i want to display.It dosnt require a normal 800x600 window to open. I just want a 1/4 size of 800x600 etc. Is this possible and if so how.
    I havnt done this before
    Thanks
    Manoj

    HELLO NED,
    I WAS RECEIVING MANY MAILS FROM YOU, BUT I DON'T UNDERSTAND WHY DOESN'T RELATED WITH MY PETITION, I SEND
    TO YOU AGAIN MY QUESTION, AND IF YOU CAN HELP ME I APPRECIATED VERY MUCH LET ME KNOW.
    THIS IS MY QUESTION....."ABOUT DATAGRID AS3
    Hello Ned, I appreciate very much your soon answer, I believe you have understand me, but how can I do that? could you give some help? This is part of the code and this is the function that I use
    var url: String = "xmls/rests.xml";
    var req:URLRequest = new URLRequest(url);
    var myLoader:URLLoader = new URLLoader();
    myLoader.addEventListener(Event.COMPLETE, completeHandler);
    myLoader.load(req);
    function completHandler(event:Event):void {
           var myLoader:URLLoader = event.currentTarget as URLLoader;
           var xmlDP:XML = new XML (myLoader.data);
           XML.ignoreWhitespace = true;
           dp = new DataProvider(xmlDP);
           dp = sortOn("name", Array.CASEINSENSITIVE);
           dDg.dataProvider = dp;
           aDg.addEventListener(Event.CHANGE, changeHandler);
           function changeHandler(event:Event): void {
                var thisItem:Object = eve.target.selectedItem;
                descripTa.text = thisItem.description;
                aUI.source = (thisItem.image);
                preloader_mc.visible = true;
    My intention is that when a button from a main (swf) loads the swf it displayed the first selected item with a image (UILoader) and the description (TextArea)
    Thanks in advance Ned
    Joselyn             .................."
    THANKS AGAIN NED
    REGARDS
    JOSELYN
    Date: Thu, 13 Oct 2011 07:49:02 -0600
    From: [email protected]
    To: [email protected]
    Subject: How can I get a small window to open when a link is clicked (AS2)
    Re: How can I get a small window to open when a link is clicked (AS2) created by Ned Murphy in Flash Pro - General - View the full discussion
    Look at the Methods section and choose whichever suits your needs, the first one listed does not.
    Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/3969302#3969302
    To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/3969302#3969302. In the Actions box on the right, click the Stop Email Notifications link.
    Start a new discussion in Flash Pro - General by email or at Adobe Forums
    For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

  • How can I Add new LookAndFel to IDE

    How can I Add new LookAndFel to IDE "JDeveloper 10g" ?
    (to the combo box in the Tool->Preferences->LookAndFeel ).

    Here is how you can add new L&Fs to the drop down list. (Instructions are for Linux , as I use Linux, but they will work for Windows too)
    Add the L&F jar to <path to JRE>/lib/ext (or <path to JDK>/jre/lib/ext). Then create swing.properties (if it does not already exist) in <path to JRE>/lib (or in jdk...) with following lines:
    swing.installedlafs = motif,windows,metal,mac,plastic
    swing.installedlaf.motif.name = CDE/Motif
    swing.installedlaf.motif.class = com.sun.java.swing.plaf.motif.MotifLookAndFeel
    swing.installedlaf.windows.name = Windows
    swing.installedlaf.windows.class = com.sun.java.swing.plaf.windows.WindowsLookAndFeel
    swing.installedlaf.metal.name = Metal
    swing.installedlaf.metal.class = javax.swing.plaf.metal.MetalLookAndFeel
    swing.installedlaf.mac.name = Mac
    swing.installedlaf.mac.class = com.sun.java.swing.plaf.mac.MacLookAndFeel
    swing.installedlaf.plastic.name = Plastic
    swing.installedlaf.plastic.class = com.jgoodies.plaf.plastic.PlasticLookAndFeel
    swing.defaultlaf=com.jgoodies.plaf.plastic.PlasticLookAndFeel
    Note that I retained default example L&Fs that normally come with the JDK/JRE (depending on the platfom) and added PlasticLookAndFeel as additional PLAF (Pluggable Look And Feel).
    Now it should be possible to choose Plastic L&F in not only JDeveloper but also other Swing apps that you want to use.
    Please let me know if this works and also if you have any questions.
    - Ganesh

  • Geotagging - how can I edit new places that I have previously created but with typos, errors etc?  How do I delete a place I have set up?

    Geotagging - how can I edit new places that I have previously created but with typos, errors etc?  How do I delete a place I have set up?  Then I could create a new, correct entry.  I'm using iPhoto '09.

    Is it OK to reply to my own question?? Thanks to the related posts that appeared AFTER I'd made the post above, I learnt about the 'Manage my places' item under the Windows menu. I felt a bit dumb not knowing this.
    BUT it doesn't completely resolve the issue.  The info shown in the EXIF (using opt-cmd-I) under Places has the place name I choose, but it is followed by a few other lines that are incorrect and do not seem to be anything to do with any data I can see under 'Manage my places'.
    Can anyone explain where these other entries might come from, and how to edit them?

Maybe you are looking for